Related references
Note: Only part of the references are listed.Fly ash-based eco-friendly geopolymer concrete: A critical review of the long-term durability properties
Mugahed Amran et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Mechanical property, nanopore structure and drying shrinkage of metakaolin-based geopolymer with waste glass powder
Ruizhe Si et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Influence of Calcium Bentonite Addition on the Compressive Strength, Efflorescence Extent and Drying Shrinkage of Fly-Ash Based Geopolymer Mortar
Yi Huang
TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY (2020)
Shrinkage behavior of fly ash based geopolymer pastes with and without shrinkage reducing admixture
Yifeng Ling et al.
CEMENT & CONCRETE COMPOSITES (2019)
Chemical deformation of metakaolin based geopolymer
Zhenming Li et al.
CEMENT AND CONCRETE RESEARCH (2019)
Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators
Sajjad Yousefi Oderji et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Effect of Fuller-fine sand on rheological, drying shrinkage, and microstructural properties of metakaolin-based geopolymer grouting materials
Jichun Xiang et al.
CEMENT & CONCRETE COMPOSITES (2019)
Shrinkage and creep strains of concrete exposed to low relative humidity and high temperature environments
Maya Nastic et al.
NUCLEAR ENGINEERING AND DESIGN (2019)
Risk of early age cracking in geopolymer concrete due to restrained shrinkage
Inamullah Khan et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
lInfluence of water and aluminium powder content on the properties of waste-containing geopolymer foams
Rui M. Novais et al.
CERAMICS INTERNATIONAL (2018)
Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste
Wonsiri Punurai et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Microstructural evaluation of initial dissolution of aluminosilicate particles and formation of geopolymer material
Rozineide A. Antunes Boca Santa et al.
PARTICUOLOGY (2018)
Geopolymers obtained from bottom ash as source of aluminosilicate cured at room temperature
Rozineide A. Antunes Boca Santa et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Influence of fly ash on the pore structure and shrinkage characteristics of metakaolin-based geopolymer pastes and mortars
Tao Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Five year drying of high performance concretes: Effect of temperature and cement-type on shrinkage
F. N. G. Brue et al.
CEMENT AND CONCRETE RESEARCH (2017)
Creep and drying shrinkage of a blended slag and low calcium fly ash geopolymer Concrete
A. Castel et al.
MATERIALS AND STRUCTURES (2016)
Metakaolin and fly ash alkali-activated mortars compared with cementitious mortars at the same strength class
Alessandra Mobili et al.
CEMENT AND CONCRETE RESEARCH (2016)
A molecular dynamics study of the role of molecular water on the structure and mechanics of amorphous geopolymer binders
Mohammad Rafat Sadat et al.
JOURNAL OF CHEMICAL PHYSICS (2016)
A Review and Comparative Study of Existing Shrinkage Prediction Models for Portland and Non-Portland Cementitious Materials
Hailong Ye et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)
The shrinkage of alkali activated fly ash
Y. Ma et al.
CEMENT AND CONCRETE RESEARCH (2015)
Hysteresis from Multiscale Porosity: Modeling Water Sorption and Shrinkage in Cement Paste
Matthew B. Pinson et al.
PHYSICAL REVIEW APPLIED (2015)
Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application
Hongyan Ma
JOURNAL OF POROUS MATERIALS (2014)
Water Vapor Sorption in Cementitious Materials-Measurement, Modeling and Interpretation
Aditya Kumar et al.
TRANSPORT IN POROUS MEDIA (2014)
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Louise K. Turner et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Ambient Temperature Drying Shrinkage and Cracking in Metakaolin-Based Geopolymers
Carsten Kuenzel et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Characterization of the pore structure of metakaolin-derived geopolymers by neutron scattering and electron microscopy
C. F. Maitland et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2011)
Evolution of Local Structure in Geopolymer Gels: An In Situ Neutron Pair Distribution Function Analysis
Claire E. White et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer
Lei Zheng et al.
CHEMOSPHERE (2010)
Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures
Daniel L. Y. Kong et al.
CEMENT AND CONCRETE RESEARCH (2007)
Reaction mechanism, kinetics and high temperature transformations of geopolymers
H. Rahier et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Physical evolution of Na-geopolymer derived from metakaolin up to 1000°C
Peter Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Understanding the relationship between geopolymer composition, microstructure and mechanical properties
P Duxson et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)
The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers
JGS van Jaarsveld et al.
CHEMICAL ENGINEERING JOURNAL (2002)
Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry -: A comparative study between oven-, vacuum-, and freeze-drying
C Gallé
CEMENT AND CONCRETE RESEARCH (2001)
Mercury porosimetry - An inappropriate method for the measurement of pore size distributions in cement-based materials
S Diamond
CEMENT AND CONCRETE RESEARCH (2000)