Related references
Note: Only part of the references are listed.Clinical evaluation of stretchable and wearable inkjet-printed strain gauge sensor for respiratory rate monitoring at different measurements locations
Ala'aldeen Al-Halhouli et al.
JOURNAL OF CLINICAL MONITORING AND COMPUTING (2021)
Inkjet Printing of Silica Aerogel for Fabrication of 2-D Patterned Thermal Insulation Layers
Junmo Koo et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
Clean production of polyester fabric inkjet printing process without fabric pretreatment and soaping
Chengyong Gao et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Inkjet printing of mammalian cells – Theory and applications
Piyush Kumar et al.
Bioprinting (2021)
Wearable temperature sensor for human body temperature detection
Burcu Arman Kuzubasoglu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)
Synergistic Effects of Alpha Olefin Sulfonate and Sodium Alginate on Inkjet Printing of Cotton/Polyamide Fabrics
Chang Li et al.
LANGMUIR (2021)
Clinical Evaluation of Respiratory Rate Measurements on COPD (Male) Patients Using Wearable Inkjet-Printed Sensor
Ala'aldeen Al-Halhouli et al.
SENSORS (2021)
Additive-Free Aqueous MXene Inks for Thermal Inkjet Printing on Textiles
Simge Uzun et al.
SMALL (2021)
Fabrication of microvascular constructs using high resolution electrohydrodynamic inkjet printing
Fei Zheng et al.
BIOFABRICATION (2021)
Effective Pretreatment Routes of Polyethylene Terephthalate Fabric for Digital Inkjet Printing of Enzyme
Tuser Biswas et al.
ADVANCED MATERIALS INTERFACES (2021)
Inkjet-printing-derived lead-zirconate-titanate-based thick fi lms for printed electronics
Danjela Kuscer et al.
MATERIALS & DESIGN (2021)
Inkjet Printing of Highly Sensitive, Transparent, Flexible Linear Piezoresistive Strain Sensors
Ting-Kuo Kang
COATINGS (2021)
Fully-Printed Piezoelectric Devices for Flexible Electronics Applications
Marc Alique et al.
ADVANCED MATERIALS TECHNOLOGIES (2021)
In Situ Inkjet Printing Patterned Lead Halide Perovskite Quantum Dot Color Conversion Films by Using Cheap and Eco-Friendly Aqueous Inks
Shuchen Shi et al.
SMALL METHODS (2021)
Ultrasensitive 3D Aerosol-Jet-Printed Perovskite X-ray Photodetector
Anastasiia Glushkova et al.
ACS NANO (2021)
High-resolution additive direct writing of metal micro/nanostructures by electrohydrodynamic jet printing
Wuhao Zou et al.
APPLIED SURFACE SCIENCE (2021)
Drying stability enhancement of red-perovskite colloidal ink via ligand-derived coating for inkjet printing
Jung Hyeon Yoo et al.
CERAMICS INTERNATIONAL (2021)
Fabrication of silver microstructures via electrohydrodynamic inkjet printing as customizable X-ray marker in bio-structure for biomedical diagnostic imaging
Xiao Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Numerical and experimental investigations of interdigital transducer configurations for efficient droplet streaming and jetting induced by surface acoustic waves
Mehdi H. Biroun et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)
High performance inkjet-printed QLEDs with 18.3% EQE: improving interfacial contact by novel halogen-free binary solvent system
Ming Chen et al.
NANO RESEARCH (2021)
Droplet impact of Newtonian fluids and blood on simple fabrics: Effect of fabric pore size and underlying substrate
T. C. de Goede et al.
PHYSICS OF FLUIDS (2021)
Current challenges and potential directions towards precision microscale additive manufacturing-Part I: Direct ink writing/jetting processes
Dipankar Behera et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)
A high-sensitivity graphene ammonia sensor via aerosol jet printing
Yuchao Zhu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2021)
Laser printed two-dimensional transition metal dichalcogenides
Omar Adnan Abbas et al.
SCIENTIFIC REPORTS (2021)
Additive manufacturing of thin electrolyte layers via inkjet printing of highly-stable ceramic inks
Zhongqi Zhu et al.
JOURNAL OF ADVANCED CERAMICS (2021)
Piezoelectric Inkjet Printing of Nanoporous Carbons for Micro-supercapacitor Devices
Yannik Braeuniger et al.
ACS APPLIED ENERGY MATERIALS (2021)
Recent Advancement of Emerging Nano Copper-Based Printable Flexible Hybrid Electronics
Zheng Li et al.
ACS NANO (2021)
A knowledge transfer framework to support rapid process modeling in aerosol jet printing
Haining Zhang et al.
ADVANCED ENGINEERING INFORMATICS (2021)
Inkjet-Printed Lenses with Adjustable Contact Angle to Improve the Light Out-Coupling of Organic Light-Emitting Diodes
Ian Sachs et al.
ADVANCED ENGINEERING MATERIALS (2021)
Acrylic polymer treatment on Nylon fibers improves color strength and durability in thermal transfer printing
Hyeok-Jin Kim et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)
All-aerosol-jet-printed highly sensitive and selective polyaniline-based ammonia sensors: a route toward low-cost, low-power gas detection
Christine Fisher et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Solvent mixture formulation for orthogonal inkjet processing and uniform pixel patterning of quantum dot light-emitting diode
Ji Hye Kim et al.
JOURNAL OF THE KOREAN PHYSICAL SOCIETY (2021)
Modelling of Power-Law Fluid Flow Inside a Piezoelectric Inkjet Printhead
Ju Peng et al.
SENSORS (2021)
Development of a flexible dielectric-barrier-discharge plasma actuator fabricated by inkjet printing using silver nanoparticles-based ink
Shintaro Sato et al.
SENSORS AND ACTUATORS A-PHYSICAL (2021)
A study on the applicability of pigment digital printing on cotton fabrics
Yi Ding et al.
TEXTILE RESEARCH JOURNAL (2021)
High Resolution Aerosol Jet Printed Components with Electrodeposition-Enhanced Conductance
Lok-kun Tsui et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2021)
Controlling Nanostructure in Inkjet Printed Organic Transistors for Pressure Sensing Applications
Matthew J. Griffith et al.
NANOMATERIALS (2021)
Investigation of Color Reproduction on Linen Fabrics when Printing with Mimaki TX400-1800D Inkjet with Pigment TP250 Dyes
Tim Tofan et al.
COATINGS (2021)
Droplet splashing on rough surfaces
Thijs de Goede et al.
PHYSICAL REVIEW FLUIDS (2021)
Investigation of high-performance perovskite nanocrystals for inkjet-printed color conversion layers with superior color purity
Sang Yoon Lee et al.
APL PHOTONICS (2021)
Flexible piezoelectric pressure sensor with high sensitivity for electronic skin using near-field electrohydrodynamic direct-writing method
Jiaqing Luo et al.
EXTREME MECHANICS LETTERS (2021)
Multiscale 3D Bioprinting by Nozzle-Free Acoustic Droplet Ejection
Stefan Jentsch et al.
SMALL METHODS (2021)
Electrohydrodynamic printing of a dielectric elastomer actuator and its application in tunable lenses
Liang Jiang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Inkjet-Printed CNT/PEDOT:PSS Temperature Sensor on a Textile Substrate for Wearable Intelligent Systems
Burcu Arman Kuzubasoglu et al.
IEEE SENSORS JOURNAL (2021)
Piezoelectric P(VDF-TrFE) film inkjet printed on silicon for high-frequency ultrasound applications
Aline Banquart et al.
JOURNAL OF APPLIED PHYSICS (2021)
High-brightness perovskite quantum dot light-emitting devices using inkjet printing
Chunbo Zheng et al.
ORGANIC ELECTRONICS (2021)
Inkjet printing of multi-stripes based deflection monitoring sensor on flexible substrate
Saleem Khan et al.
SENSORS AND ACTUATORS A-PHYSICAL (2021)
Inkjet-printed flexible silver electrodes on thiol-enes
Eero Kuusisto et al.
SENSORS AND ACTUATORS B-CHEMICAL (2021)
Inkjet Printing of a Benzocyclobutene-Based Polymer as a Low-k Material for Electronic Applications
Filippo Iervolino et al.
ACS OMEGA (2021)
A review on acoustic droplet ejection technology and system
Qing Guo et al.
SOFT MATTER (2021)
Delta-9-tetrahydrocannabinol (Δ9-THC) sensing using an aerosol jet printed organic electrochemical transistor (OECT)
Darren Majak et al.
JOURNAL OF MATERIALS CHEMISTRY B (2021)
Design and synthesis of low temperature printed metal oxide memristors
Emanuel Carlos et al.
JOURNAL OF MATERIALS CHEMISTRY C (2021)
Fully printed, stretchable and wearable bioimpedance sensor on textiles for tomography
Manoj Jose et al.
FLEXIBLE AND PRINTED ELECTRONICS (2021)
Inkjet printing of silver nanowires on flexible surfaces and methodologies to improve the conductivity and stability of the printed patterns
Prathamesh Patil et al.
NANOSCALE ADVANCES (2021)
Interfaces and pattern resolution of inkjet-printed organic light-emitting diodes with a novel hole transport layer
Dai Geon Yoon et al.
JOURNAL OF INFORMATION DISPLAY (2021)
Protease and sodium alginate combined treatment of wool fabric for enhancing inkjet printing performance of reactive dyes
Fangfang An et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Inkjet Printable Polydimethylsiloxane for All-Inkjet-Printed Multilayered Soft Electrical Applications
Riikka Mikkonen et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
High-Viscosity Copper Paste Patterning and Application to Thin-Film Transistors Using Electrohydrodynamic Jet Printing
Thi Thu Thuy Can et al.
ADVANCED ENGINEERING MATERIALS (2020)
3D Printing of Textiles: Potential Roadmap to Printing with Fibers
Kony Chatterjee et al.
ADVANCED MATERIALS (2020)
Design and experiment of a jetting dispenser with compact amplifying mechanism and low stress in piezostack
Lingyun Wang et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2020)
Printed Electronics as Prepared by Inkjet Printing
Vimanyu Beedasy et al.
MATERIALS (2020)
Fully Printed PEDOT:PSS-based Temperature Sensor with High Humidity Stability for Wireless Healthcare Monitoring
Yi-Fei Wang et al.
SCIENTIFIC REPORTS (2020)
Development of a Piezo-Driven Liquid Jet Dispenser with Hinge-Lever Amplification Mechanism
Mojiz Abbas Trimzi et al.
MICROMACHINES (2020)
Enhancing inkjet image quality through controlling the interaction of complex dye and diol molecules
Xiaoyu Zhang et al.
JOURNAL OF MOLECULAR LIQUIDS (2020)
Micro-light-emitting diodes with quantum dots in display technology
Zhaojun Liu et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Thin-Film MEMS Resistors with Enhanced Lifetime for Thermal Inkjet
Elkana Bar-Levav et al.
MICROMACHINES (2020)
On the Feasibility of Fan-Out Wafer-Level Packaging of Capacitive Micromachined Ultrasound Transducers (CMUT) by Using Inkjet-Printed Redistribution Layers
Ali Roshanghias et al.
MICROMACHINES (2020)
Efficient inkjet-printed blue OLED with boosted charge transport using host doping for application in pixelated display
Xiaojing Zheng et al.
OPTICAL MATERIALS (2020)
Inkjet-Printing Technology for Supercapacitor Application: Current State and Perspectives
Ali Sajedi-Moghaddam et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Highly efficient inkjet printed flexible organic light-emitting diodes with hybrid hole injection layer
Chen Feng et al.
ORGANIC ELECTRONICS (2020)
Benchmarking of Inkjet Printing Methods for Combined Throughput and Performance
Matteo Bevione et al.
ADVANCED ENGINEERING MATERIALS (2020)
Mini-LED, Micro-LED and OLED displays: present status and future perspectives
Yuge Huang et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Green and Efficient Inkjet Printing of Cotton Fabrics Using Reactive Dye@Copolymer Nanospheres
Yawei Song et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
The effect of ink drop spreading and coalescing on the image quality of printed cotton fabric
Kun Zhang et al.
CELLULOSE (2020)
Nonlinear piezo-inkjet equivalent circuit modeling for predicting ink ejection velocity fluctuation caused by meniscus oscillation
Yasunori Yoshida et al.
AIP ADVANCES (2020)
A brief review of innovative strategies towards structure design of practical electronic display device
Li Ma et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)
Drop impact printing
Chandantaru Dey Modak et al.
NATURE COMMUNICATIONS (2020)
Actuating Voltage Waveform Optimization of Piezoelectric Inkjet Printhead for Suppression of Residual Vibrations
Muhammad Ali Shah et al.
MICROMACHINES (2020)
Inkjet printing-based fabrication of microscale 3D ice structures
Fengyi Zheng et al.
MICROSYSTEMS & NANOENGINEERING (2020)
Insights into Influences of Dye Hydrophobicity on Cleanliness and Resolution of Fabric Ink-Jet Printing
Haibo Qin et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
SAW-driven droplet jetting technology in microfluidic: A review
Yulin Lei et al.
BIOMICROFLUIDICS (2020)
Review of digital printing technologies for electronic materials
Kye-Si Kwon et al.
FLEXIBLE AND PRINTED ELECTRONICS (2020)
On the importance of pyrolysis for inkjet-printed oxide piezoelectric thin films
Nicolas Godard et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Inkjet printed uniform quantum dots as color conversion layers for full-color OLED displays
Zhiping Hu et al.
NANOSCALE (2020)
An Inkjet Printing Technique for Scalable Microfabrication of Graphene-Based Sensor Components
Yu-Min Fu et al.
IEEE ACCESS (2020)
Beyond OLED: Efficient Quantum Dot Light-Emitting Diodes for Display and Lighting Application
Yizhe Sun et al.
CHEMICAL RECORD (2019)
Electrohydrodynamic Jet Printing Driven by a Triboelectric Nanogenerator
Changsheng Wu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Inkjet-printed silver as alternative top electrode for lead zirconate titanate thin films
Nicolas Godard et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Deformation characteristics of a single droplet driven by a piezoelectric nozzle of the drop-on-demand inkjet system
Shangkun Wang et al.
JOURNAL OF FLUID MECHANICS (2019)
Influence of needle impact velocity on the jetting effect of a piezoelectric needle-collision jetting dispenser
Yang Yang et al.
AIP ADVANCES (2019)
Laser-Induced Forward Transfer of High Viscous, Non-Newtonian Silver Nanoparticle Inks: Jet Dynamics and Temporal Evolution of the Printed Droplet Study
Ioannis Theodorakos et al.
ADVANCED ENGINEERING MATERIALS (2019)
Shortwave infrared imaging setup to study entrained air bubble dynamics in a MEMS-based piezo-acoustic inkjet printhead
Arjan Fraters et al.
EXPERIMENTS IN FLUIDS (2019)
A review of aerosol jet printing-a non-traditional hybrid process for micro-manufacturing
N. J. Wilkinson et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Mini Review on Flexible and Wearable Electronics for Monitoring Human Health Information
Yiding Gu et al.
NANOSCALE RESEARCH LETTERS (2019)
Patterning of High-Viscosity Silver Paste by an Electrohydrodynamic-Jet Printer for Use in TFT Applications
Thi Thu Thuy Can et al.
SCIENTIFIC REPORTS (2019)
All Inkjet-Printed Graphene-Silver Composite Ink on Textiles for Highly Conductive Wearable Electronics Applications
Nazmul Karim et al.
SCIENTIFIC REPORTS (2019)
New lithography technique based on electrohydrodynamic printing platform
Xingtian Qu et al.
ORGANIC ELECTRONICS (2019)
Inkjet printed adhesives for advanced M(O)EMS packaging
Ali Roshanghias et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Piezoelectric micro-jet devices: A review
Hengyu Li et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
Design and Characteristic Analysis of a MEMS Piezo-Driven Recirculating Inkjet Printhead Using Lumped Element Modeling
Muhammad Ali Shah et al.
MICROMACHINES (2019)
Pretreatment effects on pigment-based textile inkjet printing - colour gamut and crockfastness properties
Yi Ding et al.
COLORATION TECHNOLOGY (2019)
Automated tuning of high-order waveforms for picoliter resolution jetting of rheologically challenging materials
Brent Snyder et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
Hydrodynamic response model of a piezoelectric inkjet print-head
Wang Jianjun et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
Three-dimensional monolithic integration in flexible printed organic transistors
Jimin Kwon et al.
NATURE COMMUNICATIONS (2019)
SU-8 inkjet patterning for microfabrication
R. Bernasconi et al.
POLYMER (2019)
Recent Progress in Inkjet-Printed Thin-Film Transistors
Seungjun Chung et al.
ADVANCED SCIENCE (2019)
Direct Patterning of Piezoelectric Thin Films by Inkjet Printing
Nicolas Godard et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
How to manipulate droplet jetting from needle type jet dispensers
Thanh Huy Phung et al.
SCIENTIFIC REPORTS (2019)
Effect of Enhanced Squeezing Needle Structure on the Jetting Performance of a Piezostack-Driven Dispenser
Xiang Huang et al.
MICROMACHINES (2019)
Designs and applications of electrohydrodynamic 3D printing
Dajing Gao et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2019)
Advances in Microdroplet Generation Methods
Wei Yu-Yao et al.
CHINESE JOURNAL OF ANALYTICAL CHEMISTRY (2019)
Fully inkjet printed ultrathin microsupercapacitors based on graphene electrodes and a nano-graphene oxide electrolyte
Szymon Sollami Delekta et al.
NANOSCALE (2019)
PROCESS DEVELOPMENT OF LOW RESISTIVE Ag-BASED THROUGH SILICON VIAS USING INKJET PRINTING TECHNIQUE FOR 3D MICROSYSTEM INTEGRATION
Jia-Han Yang et al.
2019 IEEE 32ND INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) (2019)
FABRICATION OF 3D MICRO ICE STRUCTURES BASED ON INKJET PRINTING
Fengyi Zheng et al.
2019 IEEE 32ND INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) (2019)
Influence and evaluation of array-nozzle geometry on near- field electrospinning direct writing
Jiarong Zhang et al.
JOURNAL OF ENGINEERED FIBERS AND FABRICS (2019)
Perovskite Quantum Dots and Their Application in Light-Emitting Diodes
Hung-Chia Wang et al.
SMALL (2018)
EGaIn-Assisted Room-Temperature Sintering of Silver Nanoparticles for Stretchable, Inkjet-Printed, Thin-Film Electronics
Mahmoud Tavakoli et al.
ADVANCED MATERIALS (2018)
Analysis of droplet stability after ejection from an inkjet nozzle
Yonghong Zhong et al.
JOURNAL OF FLUID MECHANICS (2018)
A novel piezostack-driven jetting dispenser with corner-filleted flexure hinge and high-frequency performance
Zhenxiang Bu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2018)
Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics
Zheng Cui et al.
NANOSCALE (2018)
Inkjet printing for the fabrication of flexible/stretchable wearable electronic devices and sensors
Alaaldeen Al-Halhouli et al.
SENSOR REVIEW (2018)
Continuous tuneable droplet ejection via pulsed surface acoustic wave jetting
Jasmine O. Castro et al.
SOFT MATTER (2018)
Direct-Acting Piezoelectric Jet Dispenser With Rhombic Mechanical Amplifier
Can Zhou et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2018)
Simulation and Experiment on Droplet Formation and Separation for Needle-Type Micro-Liquid Jetting Dispenser
Shizhou Lu et al.
MICROMACHINES (2018)
On-Demand Laser Printing of Picoliter-Sized, Highly Viscous, Adhesive Fluids: Beyond Inkjet Limitations
Marina Makrygianni et al.
ADVANCED MATERIALS INTERFACES (2018)
Identification of Operating Parameters Most Strongly Influencing the Jetting Performance in a Piezoelectric Actuator-Driven Dispenser
Jung Woo Sohn et al.
APPLIED SCIENCES-BASEL (2018)
Optimizing piezoelectric inkjet printing of silica sols for biosensor production
Yuanhua Li et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2018)
Skin electronics from scalable fabrication of an intrinsically stretchable transistor array
Sihong Wang et al.
NATURE (2018)
Droplet impact dynamics on textiles
Gannian Zhang et al.
SOFT MATTER (2018)
Acoustophoretic printing
Daniele Foresti et al.
SCIENCE ADVANCES (2018)
Experimental Characterization of Inkjet-Printed Stretchable Circuits for Wearable Sensor Applications
Jumana Abu-Khalaf et al.
SENSORS (2018)
Inkjet-Printed Wireless Chemiresistive SensorsA Review
Melinda Hartwig et al.
CHEMOSENSORS (2018)
Inkjet Printing of Silver Nanowires for Stretchable Heaters
Qijin Huang et al.
ACS APPLIED NANO MATERIALS (2018)
Optimizing the outcoupling efficiency and the radiation pattern of organic light emitting devices by inkjet printing lens arrays films
Martijn Cramer et al.
ORGANIC ELECTRONICS AND PHOTONICS: FUNDAMENTALS AND DEVICES (2018)
A Review of Flexible OLEDs Toward Highly Durable Unusual Displays
Sung-Min Lee et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2017)
A waveform design method for high DPI piezoelectric inkjet print-head based on numerical simulation
Hongfang Wei et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2017)
Clogging of microfluidic systems
Emilie Dressaire et al.
SOFT MATTER (2017)
Fully inkjet-printed two-dimensional material field-effect heterojunctions for wearable and textile electronics
Tian Carey et al.
NATURE COMMUNICATIONS (2017)
Electric-field assisted 3D-fibrous bioceramic-based scaffolds for bone tissue regeneration: Fabrication, characterization, and in vitro cellular activities
Minseong Kim et al.
SCIENTIFIC REPORTS (2017)
Inkjet Etching of Polymers and Its Applications in Organic Electronic Devices
Wi Hyoung Lee et al.
POLYMERS (2017)
Ink-Jet Printing of Micro-Elelectro-Mechanical Systems (MEMS)
Gih-Keong Lau et al.
MICROMACHINES (2017)
Inkjet printing technology for increasing the I/O density of 3D TSV interposers
Behnam Khorramdel et al.
MICROSYSTEMS & NANOENGINEERING (2017)
In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications
Virginie Keriquel et al.
SCIENTIFIC REPORTS (2017)
The roles of wettability and surface tension in droplet formation during inkjet printing
Bing He et al.
SCIENTIFIC REPORTS (2017)
Effects of dwell time of excitation waveform on meniscus movements for a tubular piezoelectric print-head: experiments and model
Jiaqing Chang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)
A review on inkjet printing of CNT composites for smart applications
Saeideh Kholghi Eshkalak et al.
APPLIED MATERIALS TODAY (2017)
Vertical jetting induced by shear horizontal leaky surface acoustic wave on 36° Y-X LiTaO3
C. Fu et al.
APPLIED PHYSICS LETTERS (2017)
All Inkjet-Printed Metal-Oxide Thin-Film Transistor Array with Good Stability and Uniformity Using Surface-Energy Patterns
Yuzhi Li et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Drop Impact on a Solid Surface
C. Josserand et al.
ANNUAL REVIEW OF FLUID MECHANICS, VOL 48 (2016)
Observation on Satellite Behavior by Double-pulse Driving for High-speed Inkjet
Naoki Morita et al.
JOURNAL OF IMAGING SCIENCE AND TECHNOLOGY (2016)
Droplet impact on superhydrophobic surfaces: A review of recent developments
Danial Khojasteh et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2016)
Fabrication and electrical characterization of partially metallized vias fabricated by inkjet
B. Khorramdel et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2016)
Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology
Nicolaos Scoutaris et al.
PHARMACEUTICAL RESEARCH (2016)
3D Printed Tissue Models: Present and Future
Jinah Jang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printed Tissue Models: Present and Future
Jinah Jang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Tiina Vuorinen et al.
SCIENTIFIC REPORTS (2016)
High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks
Byeong Wan An et al.
ADVANCED MATERIALS (2015)
Inkjet printing for pharmaceutics - A review of research and manufacturing
Ronan Daly et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Time-Resolved Imaging Study of Jetting Dynamics during Laser Printing of Viscoelastic Alginate Solutions
Zhengyi Zhang et al.
LANGMUIR (2015)
High-Resolution Patterns of Quantum Dots Formed by Electrohydrodynamic Jet Printing for Light-Emitting Diodes
Bong Hoon Kim et al.
NANO LETTERS (2015)
Fabrication of multi-scale micro-lens arrays on hydrophobic surfaces using a drop-on-demand droplet generator
Xiaoyang Zhu et al.
OPTICS AND LASER TECHNOLOGY (2015)
Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing
M. Serdar Onses et al.
SMALL (2015)
Nozzle and needle during high viscosity adhesive jetting based on piezoelectric jet dispensing
Song Lu et al.
SMART MATERIALS AND STRUCTURES (2015)
The principle and physical models of novel jetting dispenser with giant magnetostrictive and a magnifier
C. Zhou et al.
SCIENTIFIC REPORTS (2015)
Addressable multi-nozzle electrohydrodynamic jet printing with high consistency by multi-level voltage method
Yanqiao Pan et al.
AIP ADVANCES (2015)
Design and performance evaluation of a new jetting dispenser system using two piezostack actuators
Juncheol Jeon et al.
SMART MATERIALS AND STRUCTURES (2015)
Simulation and experiment study on adhesive ejection behavior in jetting dispenser
Lingyun Wang et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2014)
A review of non-contact micro- and nano-printing technologies
Changhai Ru et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2014)
Fabrication of a flexible Ag-grid transparent electrode using ac based electrohydrodynamic Jet printing
Jaehong Park et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
Inkjet printed micropump actuator based on piezoelectric polymers: Device performance and morphology studies
Oliver Pabst et al.
ORGANIC ELECTRONICS (2014)
Hydrodynamic responses of a piezoelectric driven MEMS inkjet print-head
Byung-Hun Kim et al.
SENSORS AND ACTUATORS A-PHYSICAL (2014)
Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines
Ankit Mahajan et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Control of droplet formation by operating waveform for inks with various viscosities in piezoelectric inkjet printing
Yu-Feng Liu et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2013)
Direct fabrication of microlens arrays with high numerical aperture by ink-jetting on nanotextured surface
Yu Luo et al.
APPLIED SURFACE SCIENCE (2013)
Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plotting
Chuang Wei et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
Piezoelectric Properties of Ink-Jet-Printed Lead Zirconate Titanate Thick Films Confirmed by Piezoresponse Force Microscopy
Danjela Kuscer et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
An Initial Study of Aerosol Jet® Printed Interconnections on Extrusion-Based 3D-Printed Substrates
Frederik Vogeler et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2013)
Design and Experiment of a Jetting Dispenser Driven by Piezostack Actuator
Lingyun Wang et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2013)
Simple and easily controllable parabolic-shaped microlenses printed on polymeric mesas
Joo Yeon Kim et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Inkjet printing of conductive materials: a review
Gerard Cummins et al.
CIRCUIT WORLD (2012)
A study of ejection modes for pulsed-DC electrohydrodynamic inkjet printing
M. W. Lee et al.
JOURNAL OF AEROSOL SCIENCE (2012)
Impulsively actuated jets from thin liquid films for high-resolution printing applications
Matthew S. Brown et al.
JOURNAL OF FLUID MECHANICS (2012)
Directly fabricated multi-scale microlens arrays on a hydrophobic flat surface by a simple ink-jet printing technique
Joo Yeon Kim et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
A Waveform Design Method for a Piezo Inkjet Printhead Based on Robust Feedforward Control
Amol A. Khalate et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2012)
Fabrication of epoxy spherical microstructures by controlled drop-on-demand inkjet printing
L. Jacot-Descombes et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
A multimaterial electrohydrodynamic jet (E-jet) printing system
E. Sutanto et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
Dynamic characteristics of a piezoelectric driven inkjet printhead fabricated using MEMS technology
Byung-Hun Kim et al.
SENSORS AND ACTUATORS A-PHYSICAL (2012)
Multi-nozzle electrohydrodynamic inkjet printing of silver colloidal solution for the fabrication of electrically functional microstructures
Arshad Khan et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)
Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Martin Gruene et al.
BIOMEDICAL ENGINEERING ONLINE (2011)
Performance improvement of a drop-on-demand inkjet printhead using an optimization-based feedforward control method
Amol A. Khalate et al.
CONTROL ENGINEERING PRACTICE (2011)
Drop collisions with simple and complex surfaces
Marco Marengo et al.
CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2011)
The Effects of Electric Field on the Multijet Electrospinning Process and Fiber Morphology
Chitral J. Angammana et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)
Electrohydrodynamic pulsed-inkjet characteristics of various inks containing aluminum particles
D. K. Kang et al.
JOURNAL OF AEROSOL SCIENCE (2011)
Microstructuring of Polymer Films by Inkjet Etching
I. A. Grimaldi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Effects of nozzles array configuration on cross-talk in multi-nozzle electrohydrodynamic inkjet printing head
Kyung-Hyun Choi et al.
JOURNAL OF ELECTROSTATICS (2011)
Cross-talk effect in electrostatic based capillary array nozzles
Kyung-Hyun Choi et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2011)
Control of droplet formation for low viscosity fluid by double waveforms applied to a piezoelectric inkjet nozzle
Pyungho Shin et al.
MICROELECTRONICS RELIABILITY (2011)
Flight behavior of charged droplets in electrohydrodynamic inkjet printing
Hadi Teguh Yudistira et al.
APPLIED PHYSICS LETTERS (2010)
Inkjet Printing for Site-Controlled Tunnel Pitting with High Aspect Ratio in Al
Tatsuro Fukushima et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2010)
Influence of Electric Field Interference on Double Nozzles Electrospinning
Enlong Yang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
The dynamics of the piezo inkjet printhead operation
Herman Wijshoff
PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2010)
A Flexible Proximity Sensor Fully Fabricated by Inkjet Printing
Chin-Tsan Wang et al.
SENSORS (2010)
Waveform Design Methods for Piezo Inkjet Dispensers Based on Measured Meniscus Motion
Kye-Si Kwon
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2009)
Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation
H. Y. Gan et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Interfacial Jetting Phenomena Induced by Focused Surface Vibrations
Ming K. Tan et al.
PHYSICAL REVIEW LETTERS (2009)
Direct patterned etching of silicon dioxide and silicon nitride dielectric layers by inkjet printing
Alison J. Lennon et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
The design and control of a jetting dispenser for semiconductor electronic packaging driven by a piezostack and a flexible beam
Quoc-Hung Nguyen et al.
SMART MATERIALS AND STRUCTURES (2008)
A new type of piezostack-driven jetting dispenser for semiconductor electronic packaging: modeling and control
Quoc-Hung Nguyen et al.
SMART MATERIALS AND STRUCTURES (2008)
Design of a novel jetting dispenser featuring piezostack and linear pump
Q. H. Nguyen et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2008)
A waveform design method for high-speed inkjet printing based on self-sensing measurement
Kye-Si Kwon et al.
SENSORS AND ACTUATORS A-PHYSICAL (2007)
Direct ink writing of 3D functional materials
Jennifer A. Lewis
ADVANCED FUNCTIONAL MATERIALS (2006)
An experimental study of drop-on-demand drop formation
Hongming Dong et al.
PHYSICS OF FLUIDS (2006)
Damage-free low temperature pulsed laser printing of gold nanoinks on polymers
J Chung et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)
Multiple jets in electrospinning: experiment and modeling
SA Theron et al.
POLYMER (2005)
Failure mechanisms in thermal inkjet printhead analyzed by experiments and numerical simulation
JH Lim et al.
MICROELECTRONICS RELIABILITY (2005)
Inkjet deposition of alkanethiolate monolayers and DNA oligonucleotides on gold: Evaluation of spot uniformity by wet etching
A Bietsch et al.
LANGMUIR (2004)
Controlled deposition of nanoparticle clusters by electrohydrodynamic atomization
SN Jayasinghe et al.
NANOTECHNOLOGY (2004)
Photoresist deposition without spinning
G Perçin et al.
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2003)
Ink-jet printed nanoparticle microelectromechanical systems
SB Fuller et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2002)
A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production
AU Chen et al.
PHYSICS OF FLUIDS (2002)
Fine-line conductor manufacturing using drop-on-demand PZT printing technology
JB Szczech et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2002)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)
Deposition of optical microlens arrays by ink-jet processes
R Danzebrink et al.
THIN SOLID FILMS (2001)