Related references
Note: Only part of the references are listed.Increased Performance Improvement of Lithium-Ion Batteries by Dry Powder Coating of High-Nickel NMC with Nanostructured Fumed Ternary Lithium Metal Oxides
Marcel J. Herzog et al.
ACS APPLIED ENERGY MATERIALS (2021)
LiNbO3-coated LiNi0.8Co0.1Mn0.1O2 cathode with high discharge capacity and rate performance for all-solid-state lithium battery
Xuelei Li et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Use of carbon coating on LiNi0.8Co0.1Mn0.1O2 cathode material for enhanced performances of lithium-ion batteries
Seong-Ju Sim et al.
SCIENTIFIC REPORTS (2020)
Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries
Tianyu Li et al.
ELECTROCHEMICAL ENERGY REVIEWS (2020)
Ultrathin Al2O3 Coating on LiNi0.8Co0.1Mn0.1O2 Cathode Material for Enhanced Cycleability at Extended Voltage Ranges
Wenchang Zhu et al.
COATINGS (2019)
Effects of lithium excess and SnO2 surface coating on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 cathode material for Li-ion batteries
Zhicheng Xie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Facile preparation of carbon-LiNi1/3 Co1/3Mn1/3O2 with enhanced stability and rate capability for lithium-ion batteries
Zilong Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Y2O3-decorated LiNi0.8Co0.15Al0.05O2 cathode material with improved electrochemical performance for lithium-ion batteries
Mohammad Mohsen Loghavi et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)
Improved Capacity Retention of SiO2-Coated LiNi0.6Mn0.2Co0.2O2 Cathode Material for Lithium-Ion Batteries
Xiaoxue Lu et al.
APPLIED SCIENCES-BASEL (2019)
Surface-Coated LiNi0.8Co0.1Mn0.1O2 (NCM811) Cathode Materials by Al2O3, ZrO2, and Li2O-2B2O3 Thin-Layers for Improving the Performance of Lithium Ion Batteries
Hailin Zhang et al.
FRONTIERS IN MATERIALS (2019)
Understanding the Polymerization of Polyfurfuryl Alcohol: Ring Opening and Diels-Alder Reactions
Gianluca Tondi et al.
POLYMERS (2019)
Study of Higher Discharge Capacity, Phase Transition, and Relative Structural Stability in Li2FeSiO4 Cathode upon Lithium Extraction Using an Experimental and Theoretical Approach and Full Cell Prototype Study
Shivani Singh et al.
ACS APPLIED ENERGY MATERIALS (2019)
Prospect and Reality of Ni-Rich Cathode for Commercialization
Junhyeok Kim et al.
ADVANCED ENERGY MATERIALS (2018)
From Surface ZrO2 Coating to Bulk Zr Doping by High Temperature Annealing of Nickel-Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries
Florian Schipper et al.
ADVANCED ENERGY MATERIALS (2018)
Ameliorating the Interfacial Problems of Cathode and Solid-State Electrolytes by Interface Modification of Functional Polymers
Li-Ping Wang et al.
ADVANCED ENERGY MATERIALS (2018)
In Situ Polymerization of Furfuryl Alcohol with Ammonium Dihydrogen Phosphate in Poplar Wood for Improved Dimensional Stability and Flame Retardancy
Lizhuo Kong et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Nitrogen-doped carbon coated LiNi0.6Co0.2Mn0.2O2 cathode with enhanced electrochemical performance for Li-Ion batteries
Xian Chen et al.
ELECTROCHIMICA ACTA (2018)
Al2O3 coated LiCoO2 as cathode for high-capacity and long-cycling Li-ion batteries
Zelang Jian et al.
CHINESE CHEMICAL LETTERS (2018)
Review-Recent Advances and Remaining Challenges for Lithium Ion Battery Cathodes
Florian Schipper et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives
Seung-Taek Myung et al.
ACS ENERGY LETTERS (2017)
Al2O3, SiO2 and TiO2 as Coatings for Safer LiNi0.8Co0.15Al0.05O2 Cathodes: Electrochemical Performance and Thermal Analysis by Accelerating Rate Calorimetry
Stephan Hildebrand et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Enhanced electrochemical performance of ZrO2 modified LiNi0.6Co0.2Mn0.2O2 cathode material for lithium ion batteries
Tao Tao et al.
CERAMICS INTERNATIONAL (2017)
Mixed lithium ion and electron conducting LiAlPO3.93F1.07-coated LiCoO2 cathode with improved electrochemical performance
Bin Shen et al.
ELECTROCHEMISTRY COMMUNICATIONS (2017)
Impact of CI Doping on Electrochemical Performance in Orthosilicate (Li2FeSiO4): A Density Functional Theory Supported Experimental Approach
Shivani Singh et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries
Arumugam Manthiram et al.
ENERGY STORAGE MATERIALS (2017)
Atomic Layer Deposited MgO: A Lower Overpotential Coating for Li[Ni0.5Mn0.3Co0.2]O2 Cathode
Masihhur R. Laskar et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries
Wen Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Al2O3 Coated Concentration-Gradient Li[Ni0.73Co0.12Mn0.15]O2 Cathode Material by Freeze Drying for Long-Life Lithium Ion Batteries
Jingpeng Wang et al.
ELECTROCHIMICA ACTA (2015)
Improved electrochemical activity of nanostructured Li2FeSiO4/MWCNTs composite cathode
Shivani Singh et al.
ELECTROCHIMICA ACTA (2014)
Surface modifications of electrode materials for lithium-ion batteries: status and trends
A. Mauger et al.
IONICS (2014)
Ultrathin ZnO coating for improved electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material
Ji-Zhou Kong et al.
JOURNAL OF POWER SOURCES (2014)
Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries
Feng Lin et al.
NATURE COMMUNICATIONS (2014)
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries
Hyung-Joo Noh et al.
JOURNAL OF POWER SOURCES (2013)
Investigation on the Low-Temperature Transformations of Poly(furfuryl alcohol) Deposited on MCM-41
Rafal Janus et al.
LANGMUIR (2013)
Minimization of the cation mixing in Li1-x(NMC)1-xO2 as cathode material
Xiaoyu Zhang et al.
JOURNAL OF POWER SOURCES (2010)
Synthesis and characterization of carbon-coated LiNi1/3Co1/3Mn1/3O2 cathode material prepared by polyvinyl alcohol pyrolysis route
Rui Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Micro-FTIR and Micro-Raman Studies of a Carbon Film Prepared from Furfuryl Alcohol Polymerization
S. Bertarione et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2009)
Comparative study of LiCoO2 surface modified with different oxides
N. V. Kosova et al.
JOURNAL OF POWER SOURCES (2007)
Solvation sheath of Li+ in nonaqueous electrolytes and its implication of graphite/electrolyte interface chemistry
Kang Xu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2007)
Removal of oxidation debris from multi-walled carbon nanotubes
Raquel Verdejo et al.
CHEMICAL COMMUNICATIONS (2007)
Porous carbon obtained by the pyrolysis of TiO2/poly(furfuryl alcohol) nanocomposite:: Preparation, characterization and utilization for adsorption of reactive dyes from aqueous solution
Claudio de Almeida Filho et al.
JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY (2006)
A high-rate, nanocomposite LiFePO4/carbon cathode
CR Sides et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)
Impact of the carbon coating thickness on the electrochemical performance of LiFePO4/C composites
R Dominko et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Structural and vibrational properties of carbon nanotubes by TEM and infrared spectroscopy
C Branca et al.
DIAMOND AND RELATED MATERIALS (2004)
Synthesis, structure, and electrochemical behavior of Li[NixLi1/3-2x/3Mn2/3-x/3]O2
ZH Lu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)
Growth of fullerene-like carbon nitride thin solid films consisting of cross-linked nano-onions
Z Czigány et al.
APPLIED PHYSICS LETTERS (2001)
Electrochemical impedance study of initial lithium ion intercalation into graphite powders
CS Wang et al.
ELECTROCHIMICA ACTA (2001)
Local cationic environment in lithium nickel-cobalt oxides used as cathode materials for lithium batteries
C Julien
SOLID STATE IONICS (2000)