Related references
Note: Only part of the references are listed.3D printing of electrically conductive hydrogels for tissue engineering and biosensors - A review
Thomas Distler et al.
ACTA BIOMATERIALIA (2020)
Genetically engineered elastin-like recombinamers with sequence-based molecular stabilization as advanced bioinks for 3D bioprinting
Soraya Salinas-Fernandez et al.
APPLIED MATERIALS TODAY (2020)
Preparation and characterization of cellulose acetate-Laponite® composite membranes produced by supercritical phase inversion
Antonio Tabernero et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2020)
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks
Xiaolin Cui et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Cell-loaded injectable gelatin/alginate/LAPONITE® nanocomposite hydrogel promotes bone healing in a critical-size rat calvarial defect model
Bin Liu et al.
RSC ADVANCES (2020)
3D printing of cell-laden electroconductive bioinks for tissue engineering applications
Hadi Rastin et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
Recent advances and challenges in materials for 3D bioprinting
Hongli Mao et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)
Clay-graphene oxide liquid crystals and their aerogels: synthesis, characterization and properties
Sisi Ye et al.
ROYAL SOCIETY OPEN SCIENCE (2019)
Graphene inks for the 3D printing of cell culture scaffolds and related molecular arrays
George Mihail Vlasceanu et al.
COMPOSITES PART B-ENGINEERING (2019)
Highly Conductive, Stretchable, and Cell-Adhesive Hydrogel by Nanoclay Doping
Christoph Tondera et al.
SMALL (2019)
Natural Polymer-Based Hydrogels with Enhanced Mechanical Performances: Preparation, Structure, and Property
Ziting Bao et al.
ADVANCED HEALTHCARE MATERIALS (2019)
3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs
Bin Zhang et al.
ENGINEERING (2019)
Electrically Conductive Materials: Opportunities and Challenges in Tissue Engineering
Azadeh Saberi et al.
BIOMOLECULES (2019)
Highly Stretchable, Elastic, and Ionic Conductive Hydrogel for Artificial Soft Electronics
Yang Zhou et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Rheological evaluation of Laponite/alginate inks for 3D extrusion-based printing
Jose Luis Davila et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
3D Bioprinted GelMA Based Models for the Study of Trophoblast Cell Invasion
Houzhu Ding et al.
SCIENTIFIC REPORTS (2019)
Formation of graphene oxide-hybridized nanogels for combinative anticancer therapy
Xin Xu et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2018)
Laponite-graphene oxide hybrid particulate filler enhances mechanical properties of cross-linked epoxy
Devesh K. Chouhan et al.
JOURNAL OF POLYMER RESEARCH (2018)
Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics
Jeong Hun Kim et al.
SCIENTIFIC REPORTS (2018)
3D Bioprinting of Self-Standing Silk-Based Bioink
Zhaozhu Zheng et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Advances in Carbon Nanotubes-Hydrogel Hybrids in Nanomedicine for Therapeutics
Arti Vashist et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
Gabriel R. Lopez-Marcial et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Review of 3D printable hydrogels and constructs
Huijun Li et al.
MATERIALS & DESIGN (2018)
Smart Shear-Thinning Hydrogels as Injectable Drug Delivery Systems
Sadaf Samimi Gharaie et al.
POLYMERS (2018)
Stabilizing graphene layers by intercalating laponite between them
Li Jing et al.
NEW CARBON MATERIALS (2018)
3D Bioprinting for Tissue and Organ Fabrication
Yu Shrike Zhang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Nanocomposite Hydrogels and Their Applications in Tissue Engineering
Andisheh Motealleh et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Printability study of hydrogel solution extrusion in nanoclay yield-stress bath during printing-then-gelation biofabrication
Yifei Jin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art
Stuart Kyle et al.
ADVANCED HEALTHCARE MATERIALS (2017)
A graphene-polyurethane composite hydrogel as a potential bioink for 3D bioprinting and differentiation of neural stem cells
Chao-Ting Huang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Biocompatibility of hydrogel-based scaffolds for tissue engineering applications
Sheva Naahidi et al.
BIOTECHNOLOGY ADVANCES (2017)
Development of a clay based bioink for 3D cell printing for skeletal application
T. Ahlfeld et al.
BIOFABRICATION (2017)
Highly electrically conductive and stretchable copper nanowires-based composite for flexible and printable electronics
Wangping Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Rheology of Laponite-scleroglucan hydrogels
R. Lapasin et al.
CARBOHYDRATE POLYMERS (2017)
Self-Supporting Nanoclay as Internal Scaffold Material for Direct Printing of Soft Hydrogel Composite Structures in Air
Yifei Jin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Kai Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Laponite as a rheology modifier of alginate solutions: Physical gelation and aging evolution
Jose Luis Davila et al.
CARBOHYDRATE POLYMERS (2017)
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
Andreas Blaeser et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Clay-Graphene Nanoplatelets Functional Conducting Composites
Eduardo Ruiz-Hitzky et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
A Bioactive Carbon Nanotube-Based Ink for Printing 2D and 3D Flexible Electronics
Su Ryon Shin et al.
ADVANCED MATERIALS (2016)
Graphene oxide-Laponite hybrid from highly stable aqueous dispersion
Devesh K. Chouhan et al.
APPLIED CLAY SCIENCE (2016)
Influence of Graphene Oxide Incorporation and Chemical Cross-Linking on Structure and Mechanical Properties of Layer-by-Layer Assembled Poly(VinylAlcohol)-Laponite Free-Standing Films
T. Umasankar Patro et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2016)
An injectable shear-thinning biomaterial for endovascular embolization
Reginald K. Avery et al.
SCIENCE TRANSLATIONAL MEDICINE (2016)
Reduced Graphene Oxide-GelMA Hybrid Hydrogels as Scaffolds for Cardiac Tissue Engineering
Su Ryon Shin et al.
SMALL (2016)
Alginate: Current Use and Future Perspectives in Pharmaceutical and Biomedical Applications
Marta Szekalska et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2016)
Low cost and highly conductive elastic composites for flexible and printable electronics
Yougen Hu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Applications of Alginate-Based Bioinks in 3D Bioprinting
Eneko Axpe et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2016)
Behaviour of laponite gels: Rheology, ageing, pH effect and phase state in the presence of dispersant
Pek-Ing Au et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
Graphene-Based Materials in Regenerative Medicine
Xili Ding et al.
ADVANCED HEALTHCARE MATERIALS (2015)
Shear-Thinning Nanocomposite Hydrogels for the Treatment of Hemorrhage
Akhilesh K. Gaharwar et al.
ACS NANO (2014)
Biodegradable Nanofibrous Polymeric Substrates for Generating Elastic and Flexible Electronics
Alireza Hassani Najafabadi et al.
ADVANCED MATERIALS (2014)
An interfacially plasticized electro-responsive hydrogel for transdermal electro-activated and modulated (TEAM) drug delivery
Sunaina Indermun et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Amphiphilic silver particles for conductive inks with controlled wetting behavior
Bok Yeop Ahn et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Rheological studies of hyaluronan solutions based on the scaling law and constitutive models
Fengyuan Yu et al.
POLYMER (2014)
Clay nanomaterial thin film electrodes for electrochemical energy storage applications
M. Fatnassi et al.
RSC ADVANCES (2014)
Engineering the heart: Evaluation of conductive nanomaterials for improving implant integration and cardiac function
Jin Zhou et al.
SCIENTIFIC REPORTS (2014)
Highly Conductive Stretchable and Biocompatible Electrode-Hydrogel Hybrids for Advanced Tissue Engineering
Masato Sasaki et al.
ADVANCED HEALTHCARE MATERIALS (2014)
Materials and Optimized Designs for Human-Machine Interfaces Via Epidermal Electronics
Jae-Woong Jeong et al.
ADVANCED MATERIALS (2013)
Physico-chemical, mechanical and cytotoxicity characterizations of Laponite®/alginate nanocomposite
M. Ghadiri et al.
APPLIED CLAY SCIENCE (2013)
Sodium alginate/graphene oxide composite films with enhanced thermal and mechanical properties
Mariana Ionita et al.
CARBOHYDRATE POLYMERS (2013)
Magnetic ferrite nanoparticle-alginate composite: Synthesis, characterization and binary system dye removal
Niyaz Mohammad Mahmoodi
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2013)
Alginate-Based Biomaterials for Regenerative Medicine Applications
Jinchen Sun et al.
MATERIALS (2013)
Rheological Behavior of Polyacrylamide/Laponite Nanoparticle Suspensions in Electrolyte Media
Jamal Aalaie
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2012)
Graphene Arrested in Laponite-Water Colloidal Glass
Saeed M. Alhassan et al.
LANGMUIR (2012)
Alginate: Properties and biomedical applications
Kuen Yong Lee et al.
PROGRESS IN POLYMER SCIENCE (2012)
Preparation and characterization of chitosan/graphene oxide composites for the adsorption of Au(III) and Pd(II)
Li Liu et al.
TALANTA (2012)
Green fabrication of chitosan films reinforced with parallel aligned graphene oxide
Yongzheng Pan et al.
CARBOHYDRATE POLYMERS (2011)
Electroconductivity of Tetraethylammonium Tetrafluoroborate in Propylene Carbonate at Various Temperatures
Elena Yu Tyunina et al.
JOURNAL OF CHEMICAL AND ENGINEERING DATA (2011)
A Polyvinyl Alcohol-Polyaniline Based Electro-Conductive Hydrogel for Controlled Stimuli-Actuable Release of Indomethacin
Tong-Sheng Tsai et al.
POLYMERS (2011)
Hierarchical Nanocomposites of Polyaniline Nanowire Arrays on Graphene Oxide Sheets with Synergistic Effect for Energy Storage
Jingjing Xu et al.
ACS NANO (2010)
Centimeter-Long and Large-Scale Micropatterns of Reduced Graphene Oxide Films: Fabrication and Sensing Applications
Qiyuan He et al.
ACS NANO (2010)
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Yanwu Zhu et al.
ADVANCED MATERIALS (2010)
Spinodal Decomposition and Phase Separation Kinetics in Nanoclay-Biopolymer Solutions
Nisha Pawar et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)
Laponite and hybrid surfactant/laponite particles processed as spheres by spray-drying
Laurent Bippus et al.
NEW JOURNAL OF CHEMISTRY (2009)
Graphite oxide-intercalated anionic clay and its decomposition to graphene-inorganic material nanocomposites
C. Nethravathi et al.
LANGMUIR (2008)
Liquid, glass, gel: The phases of colloidal Laponite
Herman Z. Cummins
JOURNAL OF NON-CRYSTALLINE SOLIDS (2007)
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Sasha Stankovich et al.
CARBON (2007)
The tensile properties of alginate hydrogels
JL Drury et al.
BIOMATERIALS (2004)
Share Paper
