Related references
Note: Only part of the references are listed.In situ synchrotron computed tomography study of nanoscale interlaminar reinforcement and thin-ply effects on damage progression in composite laminates
Xinchen Ni et al.
COMPOSITES PART B-ENGINEERING (2021)
Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites
C. Breite et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
A novel particle-filled carbon-fibre reinforced polymer model composite tailored for the application of digital volume correlation and computed tomography
E. Schoberl et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Fibre-direction strain measurement in a composite ply under quasi-static tensile loading using Digital Volume Correlation and in situ Synchrotron Radiation Computed Tomography
E. Schoberl et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Hierarchical multi-scale modelling of flax fibre/epoxy composite by means of general anisotropic viscoelastic-viscoplastic constitutive models: Part II - Mesomechanical model
Rex Bedzra et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
MAP123-EP: A mechanistic-based data-driven approach for numerical elastoplastic analysis
Shan Tang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Micromechanics-based surrogate models for the response of composites: A critical comparison between a classical mesoscale constitutive model, hyper-reduction and neural networks
I. B. C. M. Rocha et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)
Automatic edge detection of ply cracks in glass fiber composite laminates under quasi-static and fatigue loading using multi-scale Digital Image Correlation
I. Miskdjian et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
A numerical homogenization scheme used for derivation of a homogenized viscoelastic-viscoplastic model for the transverse response of fiber-reinforced polymer composites
Y. Liu et al.
COMPOSITE STRUCTURES (2020)
On a unique fracture micromechanism for highly cross-linked epoxy resins
J. Chevalier et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Multi-scale characterization and modelling of the transverse compression response of unidirectional carbon fiber reinforced epoxy
J. Chevalier et al.
COMPOSITE STRUCTURES (2019)
A Robust Patterning Technique for Electron Microscopy-Based Digital Image Correlation at Sub-Micron Resolutions
C. B. Montgomery et al.
EXPERIMENTAL MECHANICS (2019)
A thermo-elasto-viscoplastic constitutive model for polymers
Joakim Johnsen et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Modeling and Simulations of Polymers: A Roadmap
Thomas E. Gartner et al.
MACROMOLECULES (2019)
Shear-Transformation Zone Activation during Loading and Unloading in Nanoindentation of Metallic Glasses
Karina E. Avila et al.
MATERIALS (2019)
One-step deposition of nano-to-micron-scalable, high-quality digital image correlation patterns for high-strain in-situ multi-microscopy testing
J. P. M. Hoefnagels et al.
STRAIN (2019)
Detailed characterization of voids in multidirectional carbon fiber/epoxy composite laminates using X-ray micro-computed tomography
Mahoor Mehdikhani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Spatial resolution and property contrast in local mechanical mapping of polymer blends using AFM dynamic force spectroscopy
Amir Bahrami et al.
POLYMER (2019)
Extreme scale-dependent tensile properties of epoxy fibers
X. M. Sui et al.
EXPRESS POLYMER LETTERS (2019)
The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
W. Tan et al.
COMPOSITES PART B-ENGINEERING (2018)
Digital Volume Correlation: Review of Progress and Challenges
A. Buljac et al.
EXPERIMENTAL MECHANICS (2018)
Unveiling the nanoscale heterogeneity controlled deformation of thermosets
Jeremy Chevalier et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Direct determination of structural heterogeneity in metallic glasses using four-dimensional scanning transmission electron microscopy
Soohyun Im et al.
ULTRAMICROSCOPY (2018)
Determination of Mechanical Properties of Polymer Interphase Using Combined Atomic Force Microscope (AFM) Experiments and Finite Element Simulations
Min Zhang et al.
MACROMOLECULES (2018)
Mechanical characterization and modeling of the deformation and failure of the highly crosslinked RTM6 epoxy resin
X. P. Morelle et al.
MECHANICS OF TIME-DEPENDENT MATERIALS (2017)
Structural composites for multifunctional applications: Current challenges and future trends
C. Gonzalez et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Combined experimental/numerical investigation of directional moisture diffusion in glass/epoxy composites
I. B. C. M. Rocha et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
A review of key developments and pertinent issues in nanoindentation testing of fibre reinforced plastic microstructures
M. Hardiman et al.
COMPOSITE STRUCTURES (2017)
Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography
S. C. Garcea et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
A framework for data-driven analysis of materials under uncertainty: Countering the curse of dimensionality
M. A. Bessa et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation
Mahoor Mehdikhani et al.
COMPOSITE STRUCTURES (2016)
Synergistic local toughening of high performance epoxy-matrix composites using blended block copolymer-thermoplastic thin films
Amir Bahrami et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Strain mapping at the micro-scale in hierarchical polymer composites with aligned carbon nanotube grafted fibers
Mahoor Mehdikhani et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Self-consistent clustering analysis: An efficient multi-scale scheme for inelastic heterogeneous materials
Zeliang Liu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Constitutive modeling of large inelastic deformation of amorphous polymers: Free volume and shear transformation zone dynamics
George Z. Voyiadjis et al.
JOURNAL OF APPLIED PHYSICS (2016)
On the origin of indentation size effects and depth dependent mechanical properties of elastic polymers
Chung-Souk Han et al.
JOURNAL OF POLYMER ENGINEERING (2016)
Experimental characterization of tensile properties of epoxy resin by using micro-fiber specimens
Jun Misumi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Direct Measurement of Rubber Interphase Stiffness
Philip F. Brune et al.
MACROMOLECULES (2016)
Length scale effects in epoxy: The dependence of elastic moduli measurements on spherical indenter tip radius
Gurudutt Chandrashekar et al.
POLYMER TESTING (2016)
The effects of pile-up, viscoelasticity and hydrostatic stress on polymer matrix nanoindentation
M. Hardiman et al.
POLYMER TESTING (2016)
Mechanically affected zone in AFM force measurements - Focus on actual probe tip geometry
L. Belec et al.
MATERIALS & DESIGN (2016)
Unveiling atomic-scale features of inherent heterogeneity in metallic glass by molecular dynamics simulations
Y. C. Hu et al.
PHYSICAL REVIEW B (2016)
Influence of plastic deformation on single-fiber push-out tests of carbon fiber reinforced epoxy resin
J. Jaeger et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Fibrous composite matrix characterisation using nanoindentation: The effect of fibre constraint and the evolution from bulk to in-situ matrix properties
M. Hardiman et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Interfacial characterization, control and modification of carbon fiber reinforced polymer composites
Li Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
High Temperature Nanoindentation Response of RTM6 Epoxy Resin at Different Strain Rates
P. Frontini et al.
EXPERIMENTAL MECHANICS (2015)
Curing dependent spatial heterogeneity of mechanical response in epoxy resins revealed by atomic force microscopy
Amir Bahrami et al.
POLYMER (2015)
Indentation Depth Dependent Mechanical Behavior in Polymers
Farid Alisafaei et al.
ADVANCES IN CONDENSED MATTER PHYSICS (2015)
Fiber bias effect on characterization of carbon fiber-reinforced polymer composites by nanoindentation testing and modeling
Zhong Hu et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Characterization of Local Elastic Modulus in Confined Polymer Films via AFM Indentation
Xu Cheng et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2015)
Influence of residual thermal stress in carbon fiber-reinforced thermoplastic composites on interfacial fracture toughness evaluated by cyclic single-fiber push-out tests
M. Greisel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Measurement and analysis of fiber-matrix interface strength of carbon fiber-reinforced phenolic resin matrix composites
J. J. Sha et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Characterization of indentation size effects in epoxy
F. Alisafaei et al.
POLYMER TESTING (2014)
Comparison of the Young's moduli of polymers measured from nanoindentation and bending experiments
Ricardo Martinez et al.
MRS COMMUNICATIONS (2014)
Shear transformation zone dynamics model for metallic glasses incorporating free volume as a state variable
L. Li et al.
ACTA MATERIALIA (2013)
The glass fiber-polymer matrix interface/interphase characterized by nanoscale imaging techniques
V. Cech et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Digital Image Correlation under Scanning Electron Microscopy: Methodology and Validation
A. D. Kammers et al.
EXPERIMENTAL MECHANICS (2013)
Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I - Constitutive modelling
A. R. Melro et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part II - Micromechanical analyses
A. R. Melro et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Determination of the mechanical properties of amorphous materials through instrumented nanoindentation
M. Rodriguez et al.
ACTA MATERIALIA (2012)
Application of digital image correlation at the microscale in fiber-reinforced composites
L. P. Canal et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
A methodology to measure the interface shear strength by means of the fiber push-in test
M. Rodriguez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
The effect of fibre constraint in the nanoindentation of fibrous composite microstructures: A finite element investigation
M. Hardiman et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing
J. LLorca et al.
ADVANCED MATERIALS (2011)
Nanoscale visualization and multiscale mechanical implications of bound rubber interphases in rubber-carbon black nanocomposites
Meng Qu et al.
SOFT MATTER (2011)
Measurement of resistance curves in the longitudinal failure of composites using digital image correlation
G. Catalanotti et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition
Vikas Srivastava et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
NanoScale Quantitative Mechanical Property Mapping Using Peak Force Tapping Atomic Force Microscopy
SC Minne et al.
MICROSCOPY AND MICROANALYSIS (2010)
Three-dimensional shear transformation zone dynamics model for amorphous metals
Eric R. Homer et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)
Influence of the molecular structure on indentation size effect in polymers
Chung-Souk Han
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Kinetic Monte Carlo study of activated states and correlated shear-transformation-zone activity during the deformation of an amorphous metal
Eric R. Homer et al.
PHYSICAL REVIEW B (2010)
Mesoscale modeling of amorphous metals by shear transformation zone dynamics
Eric R. Homer et al.
ACTA MATERIALIA (2009)
Assessment of Digital Image Correlation Measurement Errors: Methodology and Results
M. Bornert et al.
EXPERIMENTAL MECHANICS (2009)
Mechanisms of shear deformation in fiber-reinforced polymers: experiments and simulations
Essam Totry et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics
Jose Angel Ramos et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)
Full-field strain measurements for validation of meso-FE analysis of textile composites
Stepan V. Lomov et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses
D. Pan et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Scanning electron microscopy for quantitative small and large deformation measurements part i: SEM imaging at magnifications from 200 to 10,000
M. A. Sutton et al.
EXPERIMENTAL MECHANICS (2007)
Evolution in concepts concerning the mechanism of plasticity in solid polymers after the 1950s
E. F. Oleinik et al.
POLYMER SCIENCE SERIES A (2007)
Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression:: Microscopic mechanisms and modeling
Carlos Gonzalez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
An atomic force microscope tip designed to measure time-varying nanomechanical forces
Ozgur Sahin et al.
NATURE NANOTECHNOLOGY (2007)
Mechanical characterization of polymers on a nanometer scale through nanoindentation. A study on pile-up and viscoelasticity
Davide Tranchida et al.
MACROMOLECULES (2007)
AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygrothermal treatments
Ying Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Experimental determination of the true epoxy resin strength using micro-scaled specimens
Thomas Hobbiebrunken et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Combining interface damage and friction in a cohesive-zone model
Giulio Alfano et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
Accurately evaluating Young's modulus of polymers through nanoindentations: A phenomenological correction factor to the Oliver and Pharr procedure
Davide Tranchida et al.
APPLIED PHYSICS LETTERS (2006)
AFM characterization of interphase properties of silver-coated carbon fibre reinforced epoxy composites
JM He et al.
POLYMERS & POLYMER COMPOSITES (2006)
In-plane strain measurements on a microscopic scale by coupling digital image correlation and an in situ SEM technique
F Lagattu et al.
MATERIALS CHARACTERIZATION (2006)
Evaluation of interfacial strength in CF/epoxies using FEM and in-situ experiments
Thomas Hobbiebrunken et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Modeling of the postyield response of glassy polymers: Influence of thermomechanical history
ETJ Klompen et al.
MACROMOLECULES (2005)
Nanoindentation of neat and in situ polymers in polymer-matrix composites
JR Gregory et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Characterization of the aramid/epoxy interfacial properties by means of pull-out test and influence of water absorption
K Tanaka et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
A reformulation of strain gradient plasticity
NA Fleck et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Systematic errors in digital image correlation caused by intensity interpolation
HW Schreier et al.
OPTICAL ENGINEERING (2000)
Determining the interphase thickness and properties in polymer matrix composites using phase imaging atomic force microscopy and nanoindentation
TD Downing et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2000)
Share Paper
