Journal
ENGINEERING FAILURE ANALYSIS
Volume 71, Issue -, Pages 131-147Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.engfailanal.2016.06.012
Keywords
Grade 91; Cleavage facets; River-patterns; Splitting; Microstructure
Ask authors/readers for more resources
Cr-Mo creep strength enhanced ferritic (CSEF) steels are mainly used in nuclear reactors and ultra-supercritical (USC) power plants for superheater tubes and header. The present research deals with the analysis of fracture surface of the tensile and impact tested specimen of cast and forged (C&F) modified 9Cr-1Mo (P91) steels, which are subjected to different heat treatment regimes. The heat treatment temperatures were 350 degrees C, 650 degrees C, 760 degrees C and 1000 degrees C, respectively. The heat treatment was carried out a particular temperature for 2 h duration. The fracture surface of tensile and impact tested specimen were also studied for a varying time duration from 2 h to 8 h for a fixed tempering temperature of 760 degrees C. The heat treatment effect on tensile properties, toughness, Vickers hardness and particle size was also studied. Heat treatment has a noticeable effect on mechanical properties of C&F Grade 91 (X10CrMoVNNB9-1) steel. Fracture morphology is strongly affected by the microstructure and presence of secondary phase particles. The fracture surface was analyzed by using the field-emission scanning electron microscope (FE-SEM). The fractured tensile sample mainly indicates the presence of transgranular ductile dimples and transgranular cleavage facets for heat treatment temperatures of 350 degrees C, 1000 degrees C and 1040 degrees C. The percentage of cleavage facets on the tensile fracture surface was found to decrease for sample heat treated at 760 degrees C. Less amount of ductile dimples was noticed on the fracture surface for the samples heat treated at 650 degrees C and 760 degrees C (furnace-cooled). The so-called 'splitting' fracture was noticed for the sample heated at 760 degrees C. The 'splitting' fracture becomes more pronounced with the increase in tempering duration from 2 h to 8 h. The sample heat treated for 1000 degrees C, mainly indicates the cleavage facets on the fracture surface. The fracture mode of impact tested specimen is more complex and shows both ductile dimple tearing and quasi-cleavage facets for heat treatment temperature of 650 degrees C, 760 degrees C and as-received condition. The impact failure zone of sample heat treated at 350 degrees C and 1000 degrees C indicates the presence of so-called ` river pattern' on the fracture surface. (C) 2016 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available