Related references
Note: Only part of the references are listed.Optimal build orientation based on material changes for FGM parts
Sheng-Li Mi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Laser polishing of thermoplastics fabricated using fused deposition modelling
Yuan Chai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process
N. Jayanth et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Application of Fused Deposition Modelling (FDM) Method of 3D Printing in Drug Delivery
Jingjunjiao Long et al.
CURRENT PHARMACEUTICAL DESIGN (2017)
Surface quality prediction in FDM additive manufacturing
L. Di Angelo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Laser assisted finishing process for improved surface finish of fused deposition modelled parts
Mohammad Taufik et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
From 3D models to 3D prints: an overview of the processing pipeline
Marco Livesu et al.
COMPUTER GRAPHICS FORUM (2017)
Ten challenges in 3D printing
William Oropallo et al.
ENGINEERING WITH COMPUTERS (2016)
A Study of Build Edge Profile for Prediction of Surface Roughness in Fused Deposition Modeling
Mohammad Taufik et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Finishing of Fused Deposition Modeling parts by CNC machining
Alberto Boschetto et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
CNC-assisted selective melting for improved surface finish of FDM parts
Mohammad Taufik et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Ashu Garg et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Roughness prediction in coupled operations of fused deposition modeling and barrel finishing
Alberto Boschetto et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Layer the sphere For accurate and additive voxelation by integer operation
Ranita Biswas et al.
VISUAL COMPUTER (2015)
Geometric approaches to input file modification for part quality improvement in additive manufacturing
Wentao Zha et al.
JOURNAL OF MANUFACTURING PROCESSES (2015)
Adaptive Slicing in Additive Manufacturing Process Using a Modified Boundary Octree Data Structure
Nandkumar Siraskar et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Increasing Part Accuracy in Additive Manufacturing Processes Using a k-d Tree Based Clustered Adaptive Layering
Neeraj Panhalkar et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Evaluation of stiffness and strength in fused deposition sandwich specimens
L. C. Magalhes et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2014)
Close to CAD model curved-form adaptive slicing
Mohammad Hayasi et al.
RAPID PROTOTYPING JOURNAL (2014)
Part strength evolution with bonding between filaments in fused deposition modelling This paper studies how coalescence of filaments contributes to the strength of final FDM part
Pavan Kumar Gurrala et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
Optimization of slicing direction in laminated tooling for volume deviation reduction
Hossein Ahari et al.
ASSEMBLY AUTOMATION (2013)
Error Minimization in Layered Manufacturing Parts by Stereolithography File Modification Using a Vertex Translation Algorithm
Gaurav Navangul et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
Eric J. McCullough et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Relating additive and subtractive processes in a teleological and modular approach
Victoria Townsend et al.
RAPID PROTOTYPING JOURNAL (2012)
Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling
L. M. Galantucci et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Improving part quality and process efficiency in layered manufacturing by adaptive slicing
Stephane Danjou et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2010)
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
L. M. Galantucci et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Effect of delay time on part strength in selective laser sintering
Prashant K. Jain et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Optimum part deposition orientation for multiple objectives in SL and SLS prototyping
S. K. Singhal et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2009)
Surface roughness prediction using measured data and interpolation in layered manufacturing
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Representation of surface roughness in fused deposition modeling
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2009)
Geometric conformity analysis for automated fabrication processes generating ruled surfaces: demonstration for contour crafting
Zhenghao Yeh et al.
RAPID PROTOTYPING JOURNAL (2009)
Filament geometrical model and nozzle trajectory analysis in the fused deposition modeling process
Yu-zhen Jin et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2009)
Extruder path generation for Curved Layer Fused Deposition Modeling
Debapriya Chakraborty et al.
COMPUTER-AIDED DESIGN (2008)
Experimental investigations for improving part strength in selective laser sintering
Prashant K. Jain et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2008)
Determination of optimal build direction in rapid prototyping with variable slicing
HS Byun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Assessment of surface quality on textured FDM prototypes
A Armillotta
RAPID PROTOTYPING JOURNAL (2006)
The development of 3D models through rapid prototyping concepts
DMC Santos et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Volume deviation in direct slicing
C Kumar et al.
RAPID PROTOTYPING JOURNAL (2005)
Concave edge-based part decomposition for hybrid rapid prototyping
Z Hu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
A virtual prototyping system for rapid product development
SH Choi et al.
COMPUTER-AIDED DESIGN (2004)
Adaptive slicing of functionally graded material objects for rapid prototyping
MY Zhou
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2004)
NURBS-based adaptive slicing for efficient rapid prototyping
WY Ma et al.
COMPUTER-AIDED DESIGN (2004)
Benchmarking for comparative evaluation of RP systems and processes
M Mahesh et al.
RAPID PROTOTYPING JOURNAL (2004)
Rapid planning for CNC milling - A new approach for rapid prototyping
MC Frank et al.
JOURNAL OF MANUFACTURING SYSTEMS (2004)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
A generic algorithm for a best part orientation system for complex parts in rapid prototyping
SH Masood et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Surface roughness visualisation for rapid prototyping models
RI Campbell et al.
COMPUTER-AIDED DESIGN (2002)
A generic part orientation system based on volumetric error in rapid prototyping
SH Masood et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2002)
A volumetric approach to part-build orientations in rapid prototyping
W Rattanawong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
A new slicing procedure for rapid prototyping systems
YS Liao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2001)
On the integration of layered manufacturing and material removal processes
P Kulkarni et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2000)
Part build orientations based on volumetric error in fused deposition modelling
SH Masood et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2000)
Generating optimal slice data for layered manufacturing
KH Lee et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2000)