Related references
Note: Only part of the references are listed.Modeling continuous high-shear wet granulation with DEM-PB
Timo Kulju et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Model-based analysis of a twin-screw wet granulation system for continuous solid dosage manufacturing
Ashish Kumar et al.
COMPUTERS & CHEMICAL ENGINEERING (2016)
A multi-scale, mechanistic model of a wet granulation process using a novel bi-directional PBM-DEM coupling algorithm
Dana Barrasso et al.
CHEMICAL ENGINEERING SCIENCE (2015)
Conceptual framework for model-based analysis of residence time distribution in twin-screw granulation
Ashish Kumar et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
A review of pharmaceutical extrusion: Critical process parameters and scaling-up
J. Thiry et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Mechanistic modeling of modular co-rotating twin-screw extruders
Andreas Eitzlmayr et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Extrusion of Poly(ether imide) Foams Using Pressurized CO2: Effects of Imposition of Supercritical Conditions and Nanosilica Modifiers
Seda Aktas et al.
POLYMER ENGINEERING AND SCIENCE (2014)
A Multi-Scale Hybrid CFD-DEM-PBM Description of a Fluid-Bed Granulation Process
Maitraye Sen et al.
PROCESSES (2014)
A multi-dimensional population balance model approach to continuous powder mixing processes
Maitraye Sen et al.
ADVANCED POWDER TECHNOLOGY (2013)
DEM study of the transverse mixing of wet particles in rotating drums
P. Y. Liu et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Immersed boundary finite elements for 3D flow simulations in twin-screw extruders
J. -F. Hetu et al.
COMPUTERS & FLUIDS (2013)
Simulation of distributive mixing inside mixing elements of co-rotating twin-screw extruders
Arash Sarhangi Fard et al.
COMPUTERS & FLUIDS (2013)
The use of inorganic salts to improve the dissolution characteristics of tablets containing Soluplus®-based solid dispersions
Justin R. Hughey et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Model-based analysis of high shear wet granulation from batch to continuous processes in pharmaceutical production - A critical review
Ashish Kumar et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2013)
Effect of mixer geometry and operating conditions on mixing efficiency of a non-Newtonian fluid in a twin screw mixer
Maureen L. Rathod et al.
JOURNAL OF FOOD ENGINEERING (2013)
Multi-component population balance modeling of continuous granulation processes: A parametric study and comparison with experimental trends
Dana Barrasso et al.
POWDER TECHNOLOGY (2013)
Model predictive control of a twin-screw extruder for thermoplastic vulcanizate (TPV) applications
M. Trifkovic et al.
COMPUTERS & CHEMICAL ENGINEERING (2012)
Dynamic Modeling of the Reactive Twin-Screw Corotating Extrusion Process: Experimental Validation by Using Inlet Glass Fibers Injection Response and Application to Polymers Degassing
T. Goma-Bilongo et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Tools to Simulate Distributive Mixing in Twin-Screw Extruders
Arash Sarhangi Fard et al.
MACROMOLECULAR THEORY AND SIMULATIONS (2012)
DEM investigation of energy distribution and particle breakage in tumbling ball mills
M. H. Wang et al.
POWDER TECHNOLOGY (2012)
Application and Research of Fuzzy Control Simulation in Twin Screw Extruder
Ping Zhou et al.
2012 INTERNATIONAL WORKSHOP ON INFORMATION AND ELECTRONICS ENGINEERING (2012)
DEM-CFD modeling of a fluidized bed spray granulator
L. Fries et al.
CHEMICAL ENGINEERING SCIENCE (2011)
In vitro analysis and mechanical properties of twin screw extruded single-layered and coextruded multilayered poly(caprolactone) scaffolds seeded with human fetal osteoblasts for bone tissue engineering
Asli Ergun et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2011)
Thixotropic flow of toothpaste through extrusion dies
Hesam A. Ardakani et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2011)
Analysis of particle motion in a paddle mixer using Discrete Element Method (DEM)
Ali Hassanpour et al.
POWDER TECHNOLOGY (2011)
A novel design for hot-melt extrusion pelletizers
Stefan Radl et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Fusion production of solid dispersions containing a heat-sensitive active ingredient by hot melt extrusion and Kinetisol® dispersing
James C. DiNunzio et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2010)
An Analytical Model for Steady Coextrusion of Viscoplastic Fluids in Thin Slit Dies With Wall Slip
Dilhan M. Kalyon
POLYMER ENGINEERING AND SCIENCE (2010)
Experimental validation studies on a multi-dimensional and multi-scale population balance model of batch granulation
Jonathan M. -H. Poon et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Steady flow simulations of compressible PTFE paste extrusion under severe wall slip
Evan Mitsoulis et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2009)
Process Modeling in the Pharmaceutical Industry using the Discrete Element Method
William R. Ketterhagen et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2009)
A combined experimental and computational study of wet granulation in a Wurster fluid bed granulator
P. Rajniak et al.
POWDER TECHNOLOGY (2009)
Discrete particle simulation of particulate systems: A review of major applications and findings
H. P. Zhu et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Continuous-time model predictive control of food extruder
Liuping Wang et al.
CONTROL ENGINEERING PRACTICE (2008)
Modeling residence time distribution in a twin-screw extruder as a series of ideal steady-state flow reactors
Ajay Kumar et al.
JOURNAL OF FOOD ENGINEERING (2008)
Three-dimensional modelling of flow curves in co-rotating twin-screw extruder elements
M. A. Bayyeya et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: Ramifications on development of flow instabilities
H. S. Tang et al.
JOURNAL OF RHEOLOGY (2008)
Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip
H. S. Tang et al.
JOURNAL OF RHEOLOGY (2008)
A hybrid twin screw extrusion/electrospinning method to process nanoparticle-incorporated electrospun nanofibres
Cevat Erisken et al.
NANOTECHNOLOGY (2008)
Nutritional aspects of food extrusion: a review
Shivendra Singh et al.
INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY (2007)
An integrated approach for numerical analysis of coupled flow and heat transfer in co-rotating twin screw extruders
D. M. Kalyon et al.
INTERNATIONAL POLYMER PROCESSING (2007)
Pharmaceutical applications of hot-melt extrusion: Part II
Michael A. Repka et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2007)
Pharmaceutical applications of hot-melt extrusion: Part I
Michael M. Crowley et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2007)
Constitutive modeling and flow simulation of polytetrafluoroethylene (PTFE) paste extrusion
Pramod D. Patil et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2006)
Digital image processing for measurement of residence time distribution in a laboratory extruder
A Kumar et al.
JOURNAL OF FOOD ENGINEERING (2006)
Use of adjustable-gap on-line and off-line slit rheometers for the characterization of the wall slip and shear viscosity behavior of energetic formulations
Dilhan M. Kalyon et al.
JOURNAL OF ENERGETIC MATERIALS (2006)
Rheological behavior of concentrated suspensions as affected by the dynamics of the mixing process
Dilhan M. Kalyon et al.
RHEOLOGICA ACTA (2006)
Development of extrudate distortions in poly(dimethyl siloxane) and its suspensions with rigid particles
Elvan Birinci et al.
JOURNAL OF RHEOLOGY (2006)
A volume-based multi-dimensional population balance approach for modelling high shear granulation
A Darelius et al.
CHEMICAL ENGINEERING SCIENCE (2006)
Numerical study of the extrusion process in cereals production: Part I. Fluid-dynamic analysis of the extrusion system
A Ficarella et al.
JOURNAL OF FOOD ENGINEERING (2006)
3D finite element simulation of processing of generalized newtonian fluids in counter-rotating and tangential TSE and die combination
M Malik et al.
INTERNATIONAL POLYMER PROCESSING (2005)
Assessment of the degree of mixedness of filled polymers
M Erol et al.
INTERNATIONAL POLYMER PROCESSING (2005)
Evaluation of numerical simulation methods in reactive extrusion
LJ Zhu et al.
ADVANCES IN POLYMER TECHNOLOGY (2005)
High-shear granulation modeling using a discrete element simulation approach
JA Gantt et al.
POWDER TECHNOLOGY (2005)
Process systems modelling and applications in granulation: A review
IT Cameron et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Modelling the solids inflow and solids conveying of single-screw extruders using the discrete element method
PA Moysey et al.
POWDER TECHNOLOGY (2005)
Population balance modeling of non-linear effects in milling processes
E Bilgili et al.
POWDER TECHNOLOGY (2005)
Apparent slip and viscoplasticity of concentrated suspensions
DM Kalyon
JOURNAL OF RHEOLOGY (2005)
Numerical simulations of non-isothermal three-dimensional flows in an extruder by a finite-volume method
A Khalifeh et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2005)
Generic dynamic model for simulation and control of reactive extrusion
S Choulak et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2004)
Biological reaction modeling using radial basis function networks
A Vande Wouwer et al.
COMPUTERS & CHEMICAL ENGINEERING (2004)
Optimization of die profile for improving die life in the hot extrusion process
L Zou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Residence time distribution in a co-rotating, twin-screw continuous mixer by the step change method
GR Ziegler et al.
JOURNAL OF FOOD ENGINEERING (2003)
Wall slip and extrudate distortion of three polymer melts
DM Kalyon et al.
JOURNAL OF RHEOLOGY (2003)
Modeling selected properties of extruded waxy maize cross-linked starches with neural networks
GM Ganjyal et al.
JOURNAL OF FOOD SCIENCE (2003)
Adaptive finite element simulations of fluid flow in twin-screw extruders
F Bertrand et al.
COMPUTERS & CHEMICAL ENGINEERING (2003)
Microdynamic analysis of particle flow in a horizontal rotating drum
RY Yang et al.
POWDER TECHNOLOGY (2003)
A study of residence time distribution in co-rotating twin-screw extruders. Part I: Theoretical modeling
A Poulesquen et al.
POLYMER ENGINEERING AND SCIENCE (2003)
A study of residence time distribution in co-rotating twin-screw extruders. Part II: Experimental validation
A Poulesquen et al.
POLYMER ENGINEERING AND SCIENCE (2003)
Rheology and extrusion of medical-grade thermoplastic polyurethane
GY Lu et al.
POLYMER ENGINEERING AND SCIENCE (2003)
Improved design of shearing sections with new calculation models based on 3D finite-element simulations
H Potente et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2002)
Development, analysis and validation of population models for continuous and batch crystallizers
A Gerstlauer et al.
CHEMICAL ENGINEERING SCIENCE (2002)
Electrical properties of composites as affected by the degree of mixedness of the conductive filler in the polymer matrix
DM Kalyon et al.
POLYMER ENGINEERING AND SCIENCE (2002)
Population balances for particulate processes - a volume approach
D Verkoeijen et al.
CHEMICAL ENGINEERING SCIENCE (2002)
Tracer studies of high-shear granulation: II. Population balance modeling
MJ Hounslow et al.
AICHE JOURNAL (2001)
Computer aided rheological design of extrusion dies for profiles
OS Carneiro et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
3-D non-isothermal flow field analysis and mixing performance evaluation of kneading blocks in a co-rotating twin srew extruder
T Ishikawa et al.
POLYMER ENGINEERING AND SCIENCE (2001)
A new approach to modeling and control of a food extrusion process using artificial neural network and an expert system
O Popescu et al.
JOURNAL OF FOOD PROCESS ENGINEERING (2001)
Modelling extrusion cooking
CH Li
MATHEMATICAL AND COMPUTER MODELLING (2001)
Residence time distribution in a corotating twin-screw extruder
JP Puaux et al.
CHEMICAL ENGINEERING SCIENCE (2000)
On-line system identification and control design of an extrusion cooking process: Part I. System identification
TA Haley et al.
FOOD CONTROL (2000)
Isothermal transient startup of a starved flow modular co-rotating twin screw extruder
EK Kim et al.
POLYMER ENGINEERING AND SCIENCE (2000)
Share Paper
