4.8 Article

A Unique Structural Highly Compacted Binder-Free Silicon-Based Anode with High Electronic Conductivity for High-Performance Lithium-Ion Batteries

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Key Factors for Binders to Enhance the Electrochemical Performance of Silicon Anodes through Molecular Design

Haoli Wang et al.

Summary: Silicon is considered a promising anode material for lithium-ion batteries due to its high theoretical capacity, but its application is limited by vast volume change and low electrical conductivity. In the silicon anode system, binders play a crucial role in mechanical performance and conductive integrity. This review summarizes key factors affecting binders' performance and provides commonly used modification methods to improve binder performance.

SMALL (2022)

Article Engineering, Environmental

Si-on-Graphite fabricated by fluidized bed process for high-capacity anodes of Li-ion batteries

Jannes Mueller et al.

Summary: The study reports the fabrication of silicon-on-graphite composites using fluidized bed granulation for the first time, showing the formation of core-shell microstructure. By using a suitable binder during the process, the carbon-coated composites exhibit high capacity, high rate capability, and long cycle stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Highly Energy-Dissipative, Fast Self-Healing Binder for Stable Si Anode in Lithium-Ion Batteries

Xingxing Jiao et al.

Summary: A double-wrapped binder with high Young's modulus polyacrylic acid (PAA) inside and low Young's modulus bifunctional polyurethane (BFPU) outside has been designed to address large inner stress of silicon anode during cycling. The binder utilizes a gradient distribution strategy to dissipate stress, with PAA as a protective layer and BFPU as a buffer layer, ensuring the integrity of the silicon anode and enhancing cycling life.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

A self-driven alloying/dealloying approach to nanostructuring micro-silicon for high-performance lithium-ion battery anodes

Qiang Ma et al.

Summary: The self-driven alloying/dealloying approach and vacuum-distillation process improve the utilization of micro-sized silicon, reduce the use of toxic reagents, and maintain a closed-loop material circle, offering an efficient and green pathway for enhancing lithium-storage anodes.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

Investigating the Compatibility of TTMSP and FEC Electrolyte Additives for LiNi0.5Mn0.3Co0.2O2 (NMC)-Silicon Lithium-Ion Batteries

Anulekha K. Haridas et al.

Summary: This study investigates the compatibility of multi-electrolyte additives for NMC-silicon lithium-ion batteries. The results show that at the optimal TTMSP/FEC ratio, the NMC-Si full-cells achieve a 2x longer cycle life and higher areal capacities with improved capacity retention. Furthermore, a detailed investigation of the electrode-electrolyte interfaces reveals the synergistic effects of electrolyte additives in stabilizing the interfaces and minimizing capacity degradation in NMC-Si full-cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Ceramics

Novel SiOx/Cu3Si/Cu anode materials for lithium-ion batteries

Puhua Ouyang et al.

Summary: Commercial graphite anode materials with low theoretical specific capacity cannot meet the demand for high energy density lithium-ion batteries. Silicon monoxide (SiOx, 0 < x < 2) has the potential to be used as the next generation anode material due to its high theoretical specific capacity and safety. The SiOx/Cu3Si/Cu composite material synthesized in this study showed significantly improved discharge specific capacity and cycling performance compared to pure SiOx.

CERAMICS INTERNATIONAL (2021)

Article Nanoscience & Nanotechnology

A facile and low-cost Al2O3 coating as an artificial solid electrolyte interphase layer on graphite/silicon composites for lithium-ion batteries

Hongzheng Zhu et al.

Summary: In this study, a low-cost Al2O3 coating was successfully developed to fabricate stable artificial SEI layers on G/Si composites, which not only improved the discharge capacity and cycling stability of the G/Si anode, but also suppressed the growth of SEI and reduced charge transfer resistance at the G/Si-electrolyte interface.

NANOTECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Facile and Efficient Fabrication of Branched Si@C Anode with Superior Electrochemical Performance in LIBs

Li Cao et al.

Summary: The novel branched Si architecture fabricated through laser processing and dealloying showed improved area capacity and cycling stability. The branched Si@C anode demonstrated high gravimetric capacity and good retention rates at different cycling rates. This study highlights the importance of dendritic microstructure in the fabrication of branched Si and provides new insights into efficient fabrication of Si nanostructures.

SMALL (2021)

Article Chemistry, Multidisciplinary

Zn2+-Imidazole Coordination Crosslinks for Elastic Polymeric Binders in High-Capacity Silicon Electrodes

Jaemin Kim et al.

Summary: Recent research has highlighted the importance of highly reversible metal ion-ligand coordination chemistries for binders intended for high capacity alloying-based electrodes. These binders possess high elasticity to maintain electrode integrity during cycling of silicon anodes, promoting long-term cycling performance.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Graphene wrapped silicon suboxides anodes with suppressed Li-uptake behavior enabled superior cycling stability

Rusheng Fu et al.

Summary: This study developed a SiO/graphene/C composite anode with self-mechanical inhibition mechanism to restrict intrinsic Li-uptake, improving cycling stability. The composite anode exhibited superior performance in cycling stability, volume expansion, and capacity retention compared to traditional SiO@C anode.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Multidisciplinary

Stable Hollow-Structured Silicon Suboxide-Based Anodes toward High-Performance Lithium-Ion Batteries

Hao Tian et al.

Summary: Silicon suboxide has shown potential as an anode material for high-energy-density lithium-ion batteries, but issues with electronic conductivity and Coulombic efficiency have hindered its practical application. By designing hollow-structured SiOx@CNTs/C architectures, these issues have been successfully addressed, paving the way for developing high-energy-density LIBs based on SiOx.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Engineering Molecular Polymerization for Template-Free SiOx/C Hollow Spheres as Ultrastable Anodes in Lithium-Ion Batteries

Xiaoming Zhou et al.

Summary: The molecular polymerization strategy used to construct SiOx/C hollow particles for lithium-ion batteries shows promise in achieving excellent Li+-ion storage behaviors. This method allows for the effective and scalable synthesis of Si-based hollow composites and opens up a new avenue for template-free hollow architectures.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Manipulating Oxidation of Silicon with Fresh Surface Enabling Stable Battery Anode

Gaofeng Ge et al.

Summary: Silicon-based material shows potential as the anode material for next-generation lithium-ion batteries. The fabrication of a silicon oxide-carbon (SiOx/C) nanocomposite with controllable oxidation and conductive coating offers good stability and high reversible capacity in electrochemical cycling. The composite also demonstrates stable electrochemical cycling and high capacity retention over multiple cycles.

NANO LETTERS (2021)

Article Chemistry, Multidisciplinary

Silicon in Hollow Carbon Nanospheres Assembled Microspheres Cross-linked with N-doped Carbon Fibers toward a Binder Free, High Performance, and Flexible Anode for Lithium-Ion Batteries

Ruiyu Zhu et al.

Summary: This study investigates the challenges faced by silicon as an anode material in lithium-ion batteries and successfully prepares a binder-free and free-standing anode electrode paper, achieving excellent battery performance and demonstrating great potential for practical applications.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Supercritical CO2-Assisted SiOx/Carbon Multi-Layer Coating on Si Anode for Lithium-Ion Batteries

Rahmandhika Firdauzha Hary Hernandha et al.

Summary: The use of supercritical CO2 for depositing carbon and SiOx layers on silicon particles leads to the development of a unique anode material suitable for lithium-ion batteries. By comparing different carbon precursors, glucose is found to be the most suitable for SCCO2 synthesis. The anode exhibits high specific capacity and good cycling stability at high currents.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

Advances in Si and SiC Materials for High-Performance Supercapacitors toward Integrated Energy Storage Systems

Tuan Kien Nguyen et al.

Summary: This review discusses the latest advances and advantages of silicon-based and silicon carbide-based supercapacitors in the field of energy storage, as well as future research directions.

SMALL (2021)

Article Chemistry, Multidisciplinary

Constructing a Reinforced and Gradient Solid Electrolyte Interphase on Si Nanoparticles by In-Situ Thiol-Ene Click Reaction for Long Cycling Lithium-Ion Batteries

Liang Zhao et al.

Summary: Constructing a reinforced and gradient SEI on silicon nanoparticles through an in-situ thiol-ene click reaction is an effective method to improve cycling performance and stability. The modified SEI can homogenize stress and strain during lithiation to reduce expansion and prevent cracking, leading to excellent performance and cycling stability in high-energy-density lithium-ion batteries.

SMALL (2021)

Article Chemistry, Multidisciplinary

A Multi-Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High-Rate and Long-Life Lithium-Ion Batteries

Songwei Gao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Engineering, Environmental

Si-based composite interconnected by multiple matrices for high-performance Li-ion battery anodes

Seung-Su Lee et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Yolk-shelled Sn@C@MnO hierarchical hybrid nanospheres for high performance lithium-ion batteries

Fanchao Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Multidisciplinary

Binder-Free Electrodes for Advanced Sodium-Ion Batteries

Ting Jin et al.

ADVANCED MATERIALS (2020)

Article Nanoscience & Nanotechnology

Building a Cycle-Stable Fe-Si Alloy/Carbon Nanocomposite Anode for Li-Ion Batteries through a Covalent-Bonding Method

Hui Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Diatomite-Derived Hierarchical Porous Crystalline-AmorphousNetwork for High-Performance and Sustainable Si Anodes

Ying Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Stabilization of Sn Anode through Structural Reconstruction of a Cu-Sn Intermetallic Coating Layer

Guanzhi Wang et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

High Performance Lithium-Ion Batteries Using Layered 2H-MoTe2 as Anode

Manas Ranjan Panda et al.

SMALL (2020)

Article Chemistry, Analytical

Improving cycle stability of Si anode through partially carbonized polydopamine coating

Maziar Ashuri et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Article Chemistry, Physical

Magnesium silicide-derived porous Sb-Si-C composite for stable lithium storage

Hyungeun Seo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Review Chemistry, Physical

Review on Nanoarchitectured Current Collectors for Pseudocapacitors

Long Liu et al.

SMALL METHODS (2019)

Review Chemistry, Multidisciplinary

Graphene hybridization for energy storage applications

Xianglong Li et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Engineering, Chemical

Poly-dopamine coated graphite oxide/silicon composite as anode of lithium ion batteries

Jing Wu et al.

POWDER TECHNOLOGY (2017)

Article Chemistry, Multidisciplinary

Highly Connected Silicon-Copper Alloy Mixture Nanotubes as High-Rate and Durable Anode Materials for Lithium-Ion Batteries

Hucheng Song et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

A Robust Ion-Conductive Biopolymer as a Binder for Si Anodes of Lithium-Ion Batteries

Jie Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Article Chemistry, Multidisciplinary

SiOx Nanodandelion by Laser Ablation for Anode of Lithium-Ion Battery

Xi Luo et al.

SMALL (2015)

Article Chemistry, Multidisciplinary

MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes

Lamuel David et al.

ACS NANO (2014)

Article Chemistry, Multidisciplinary

Multilayered Si Nanoparticle/Reduced Graphene Oxide Hybrid as a High-Performance Lithium-Ion Battery Anode

Jingbo Chang et al.

ADVANCED MATERIALS (2014)

Article Chemistry, Multidisciplinary

A Highly Cross-Linked Polymeric Binder for High-Performance Silicon Negative Electrodes in Lithium Ion Batteries

Bonjae Koo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Article Electrochemistry

Electrochemical performance of Al-Si-graphite composite as anode for lithium-ion batteries

Wenchao Zhou et al.

ELECTROCHEMISTRY COMMUNICATIONS (2011)

Article Chemistry, Physical

Silicon nanowires coated with copper layer as anode materials for lithium-ion batteries

Huixin Chen et al.

JOURNAL OF POWER SOURCES (2011)