4.7 Article

Wound healing efficacy of biocompatible hydroxyapatite from bovine bone waste for bone tissue engineering application

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

Extraction and characterization of hydroxyapatite-based materials from grey triggerfish skin and black scabbardfish bones

Pedro Ideia et al.

Summary: The conversion of food industry by-products to high added value compounds is an important topic for social, environmental, and economic reasons. In this study, bioceramic materials were obtained from fish by-products, demonstrating potential applications in the biomedical field as bone grafts. The composition and particle morphology of the materials can be tuned based on calcination temperature.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)

Article Materials Science, Ceramics

Preparation and application of hydroxyapatite extracted from fish scale waste using deep eutectic solvents

Yanhong Liu et al.

Summary: This study proposed a green and environmentally-friendly method to extract hydroxyapatite (HAP) from crucian carp scales, achieving a extraction rate of 40.58%. The extracted HAP displayed high purity, excellent thermal stability, and good adsorption capacity for metal ions like lead and copper.

CERAMICS INTERNATIONAL (2021)

Article Biology

Spectral characterization of hydroxyapatite extracted from Black Sumatra and Fighting cock bone samples: A comparative analysis

K. C. Vinoth Kumar et al.

Summary: In this study, natural hydroxyapatite was extracted from different bone samples through thermal calcination process and compared for their crystalline nature, functional groups and morphological characteristics. The results showed that hydroxyapatite from waste bones of fighting cock had higher crystallinity and smaller grain size compared to Black Sumatra bones.

SAUDI JOURNAL OF BIOLOGICAL SCIENCES (2021)

Article Materials Science, Multidisciplinary

Biocompatibility and mechanical properties of pigeon bone waste extracted natural nano-hydroxyapatite for bone tissue engineering

Fariborz Sharifianjazi et al.

Summary: Naturally derived nano-hydroxyapatite (PHA) was prepared from waste pigeon bones using ball milling, with an average particle size of 50-250 nm. Sintering the nanoparticles at 1050 degrees C resulted in a Ca/P ratio of 1.7 and improved hardness and compressive strength. Alkaline phosphatase analysis and MTT assay showed significant enhancement in osteoblast cell activity and proliferation compared to synthetic HAp.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Review Crystallography

Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction

Hui Shi et al.

Summary: Hydroxyapatite is widely used in bone tissue engineering for its bioactivity and biocompatibility, with researchers exploring ways to improve its physical properties and biological functions. Functionalized HA has been prepared using methods such as ion doping and surface modification, and applications in bone tissue engineering have been discussed in this review. The review provides a general understanding of the development of hydroxyapatite-based materials for researchers.

CRYSTALS (2021)

Article Infectious Diseases

Antimicrobial and Wound Healing Properties of FeO Fabricated Chitosan/PVA Nanocomposite Sponge

Anbazhagan Sathiyaseelan et al.

Summary: A new nanocomposite scaffold was developed for accelerated healing of anemia-associated diabetic wounds, showing excellent biological activity and antibacterial properties. The PD-FeO NPs (0.01%) incorporated CS/PVA sponge exhibited promising cell proliferation in vitro wound-healing assay and could be a recommended option for diabetic wound dressing.

ANTIBIOTICS-BASEL (2021)

Review Nanoscience & Nanotechnology

Nanomaterials-Upconverted Hydroxyapatite for Bone Tissue Engineering and a Platform for Drug Delivery

Nur Akma Abdul Halim et al.

Summary: Hydroxyapatite and its nanocomposites have potential applications in bone tissue engineering and drug loading systems, with research focused on enhancing their mechanical properties for broader usage.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2021)

Article Chemistry, Multidisciplinary

Fabrication of copper ions-substituted hydroxyapatite/polydopamine nanocomposites with high antibacterial and angiogenesis effects for promoting infected wound healing

Bailong Tao et al.

Summary: This study introduces an effective anti-infection approach based on copper ions-releasing nanocomposites with a photothermal effect. The nanocomposites showed extraordinary antibacterial capacities and promoted wound healing in both in vitro and in vivo studies.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Engineering, Environmental

Carbonated nanohydroxyapatite from bone waste and its potential as a super adsorbent for removal of toxic ions

Yurina Sekine et al.

Summary: The study introduces an eco-friendly hydroxyapatite nanocrystal adsorbent prepared from bone waste, showing its efficient adsorption performance for hazardous metals. Results indicate that C-NHAP has significantly greater adsorption capacity for Sr2+ compared to clinoptilolite and untreated bone, while also exhibiting high ion-adsorption performance. The research suggests that C-NHAP has the potential to be a low-cost material useful for environmental pollutant removal and food waste disposal.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Biochemistry & Molecular Biology

Biocompatible fungal chitosan encapsulated phytogenic silver nanoparticles enhanced antidiabetic, antioxidant and antibacterial activity

Anbazhagan Sathiyaseelan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Review Engineering, Environmental

Hydroxyapatite, a multifunctional material for air, water and soil pollution control: A review

Maya Ibrahim et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Review Chemistry, Multidisciplinary

Optimizing Nanohydroxyapatite Nanocomposites for Bone Tissue Engineering

Baboucarr Lowe et al.

ACS OMEGA (2020)

Article Biochemistry & Molecular Biology

Effect of chitosan infiltration on hydroxyapatite scaffolds derived from New Zealand bovine cancellous bones for bone regeneration

Niranjan Ramesh et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Materials Science, Multidisciplinary

Morphological, antibacterial, and cell attachment of cellulose acetate nanofibers containing modified hydroxyapatite for wound healing utilizations

Mardia T. Elsayed et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Proceedings Paper Materials Science, Multidisciplinary

Synthesis method of hydroxyapatite: A review

N. A. S. Mohd Pu'ad et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Review Nanoscience & Nanotechnology

Hydroxyapatite Nanoparticle Coating on Polymer for Constructing Effective Biointeractive Interfaces

Tania Guadalupe Penaflor Galindo et al.

JOURNAL OF NANOMATERIALS (2019)

Article Multidisciplinary Sciences

Synthesis of Hydroxyapatite with Antibacterial Properties Using a Microwave-Assisted Combustion Method

Suphatchaya Lamkhao et al.

SCIENTIFIC REPORTS (2019)

Article Engineering, Electrical & Electronic

Hydroxyapatite extracted by animal bone image analysis in ionic liquid choline chloride-glycerol

Hong Zhu et al.

EURASIP JOURNAL ON IMAGE AND VIDEO PROCESSING (2018)

Article Oncology

Migratory Metrics of Wound Healing: A Quantification Approach for in vitro Scratch Assays

Sagar S. Varankar et al.

FRONTIERS IN ONCOLOGY (2018)

Article Materials Science, Multidisciplinary

From Waste to Health: Synthesis of Hydroxyapatite Scaffolds From Fish Scales for Lead Ion Removal

Wen-Kuang Liu et al.

Article Materials Science, Multidisciplinary

Study of bovine hydroxyapatite obtained by calcination at low heating rates and cooled in furnace air

Sandra M. LondonO-Restrepo et al.

JOURNAL OF MATERIALS SCIENCE (2016)

Article Engineering, Chemical

Extraction of biocompatible hydroxyapatite from fish scales using novel approach of ionic liquid pretreatment

Nawshad Muhammad et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2016)

Article Biotechnology & Applied Microbiology

Extraction and characterization of biocompatible hydroxyapatite from fresh water fish scales for tissue engineering scaffold

Niladri Nath Panda et al.

BIOPROCESS AND BIOSYSTEMS ENGINEERING (2014)

Review Materials Science, Multidisciplinary

Extracting hydroxyapatite and its precursors from natural resources

Muhammad Akram et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Article Engineering, Multidisciplinary

Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation

Mei-ling Lau et al.

COMPOSITES PART B-ENGINEERING (2013)

Article Materials Science, Multidisciplinary

Controlled synthesis and thermal stability of hydroxyapatite hierarchical microstructures

Ruixue Sun et al.

MATERIALS RESEARCH BULLETIN (2013)

Article Materials Science, Ceramics

The influence of calcination parameters on free calcium oxide content in natural hydroxyapatite

Agnieszka Sobczak-Kupiec et al.

CERAMICS INTERNATIONAL (2012)

Review Engineering, Biomedical

Nanoscale hydroxyapatite particles for bone tissue engineering

Hongjian Zhou et al.

ACTA BIOMATERIALIA (2011)

Article Chemistry, Multidisciplinary

Hydroxyapatite: Hexagonal or Monoclinic?

Guobin Ma et al.

CRYSTAL GROWTH & DESIGN (2009)

Article Engineering, Industrial

Extraction of pure natural hydroxyapatite from the bovine bones bio waste by three different methods

Nasser A. M. Barakat et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

Review Food Science & Technology

Fish industry waste: treatments, environmental impacts, current and potential uses

Ioannis S. Arvanitoyannis et al.

INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY (2008)

Article Materials Science, Multidisciplinary

Morphological effects of variant carbonates in biomimetic hydroxyapatite

Susan Liao et al.

MATERIALS LETTERS (2007)

Article Instruments & Instrumentation

Structures of biological minerals in dental research

M Mathew et al.

JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2001)