4.7 Article

Structural Batteries for Aeronautic Applications-State of the Art, Research Gaps and Technology Development Needs

Related references

Note: Only part of the references are listed.
Article Mechanics

Characteristics of woven carbon fabric current collector electrodes for structural battery

Hyun-Wook Park et al.

Summary: The study manufactured electrodes using woven carbon fabric as the current collector for structural batteries. It was found that an electrode with a thickness of 300 microns showed relatively higher mechanical performance and stable electrochemical reactions in the battery. This electrode demonstrated capacities of 112 mAhg(-1) and 35-36 mAhg(-1) at different rates of charge/discharge.

COMPOSITE STRUCTURES (2021)

Article Energy & Fuels

Structural Power Performance Targets for Future Electric Aircraft

Elitza Karadotcheva et al.

Summary: The study investigated the feasibility of integrating structural power composites into future electric aircraft and assessed the impact on emissions. Results showed that structural power composites could potentially make electric aircraft lighter and safer, while increasing fuel efficiency.

ENERGIES (2021)

Review Chemistry, Physical

A review of current collectors for lithium-ion batteries

Pengcheng Zhu et al.

Summary: This review article presents six types of materials for current collectors, including Al, Cu, Ni, Ti, stainless steel and carbonaceous materials, and compares them based on five aspects of electrochemical stability, electrical conductivity, mechanical property, density, and sustainability. The effects of three different structures of foil, mesh, and foam as well as two treatments of chemical etching and coating are also discussed, highlighting future opportunities for next-generation lithium-ion batteries.

JOURNAL OF POWER SOURCES (2021)

Review Biochemistry & Molecular Biology

Structural Batteries: A Review

Federico Danzi et al.

Summary: Structural power composites offer a possible solution for the demands of modern transportation system. Recent studies have demonstrated the integration of commercially available lithium-ion batteries into composite structures and the fabrication of carbon fiber-based multifunctional materials for monolithic structural batteries. Challenges include the maximum curing cycle for embedded configuration and the need for highly conductive structural electrolytes.

MOLECULES (2021)

Article Materials Science, Composites

Carbon fiber reinforced Zn?MnO2 structural composite batteries

Junyan Chen et al.

Summary: The paper introduces a novel carbon fiber reinforced Zn-MnO2 structural composite battery with excellent tensile strength and high specific capacity, which can be easily manufactured and retains 88.3% capacity after 100 cycles.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Energy & Fuels

Multifunctional approaches for safe structural batteries

Sergiy Kalnaus et al.

Summary: Recent advancements in Li and Li-ion based energy storage have led to the development of novel electrode materials with higher energy density for applications in transportation. Improvements in specific energy of the system based solely on design of material compositions for multivalent intercalation compounds are limited, necessitating new approaches to enhance both energy density and safety of batteries.

JOURNAL OF ENERGY STORAGE (2021)

Article Engineering, Aerospace

Conceptual Multifunctional Design, Feasibility and Requirements for Structural Power in Aircraft Cabins

Sang N. Nguyen et al.

Summary: This paper investigates the potential use of structural power composites in regional aircraft passenger cabins and the challenges to widespread use, focusing on applying these composites in sandwich floor panels to power entertainment systems. The study sets performance targets for electrochemical energy storage based on mechanical models and advanced laminated composites, highlighting significant mass and cost savings with the use of a distributed energy storage system. Analysis on an Airbus A220-100 predicts potential mass and volume savings, as well as reductions in CO2 and NOx emissions, showcasing the far-reaching implications and systemic benefits of implementing structural power materials.

JOURNAL OF AIRCRAFT (2021)

Article Green & Sustainable Science & Technology

A Structural Battery and its Multifunctional Performance

Leif E. Asp et al.

Summary: This study demonstrates a structural battery composite with unprecedented multifunctional performance, which can play a significant role in lightweight design. The structural battery is made from multifunctional constituents, including reinforcing carbon fibers, structural electrolyte, and glass fiber fabric.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

Article Materials Science, Multidisciplinary

Additive Manufactured Carbon Nanotube/Epoxy Nanocomposites for Heavy-Duty Applications

Qixiang Jiang et al.

Summary: A solid epoxy resin formulation with 2.5 wt % carbon nanotubes is 3D printed into self-standing parts, which when thermally cured result in CNTs/epoxy nanocomposites with mechanical properties suitable for heavy-duty applications.

ACS APPLIED POLYMER MATERIALS (2021)

Article Engineering, Aerospace

Integration of energy storage functionalities into fiber reinforced spacecraft structures

Benjamin Grzesik et al.

ACTA ASTRONAUTICA (2020)

Article Chemistry, Physical

Performance Metrics Required of Next-Generation Batteries to Electrify Commercial Aircraft

Alexander Bills et al.

ACS ENERGY LETTERS (2020)

Article Engineering, Multidisciplinary

Performance analysis framework for structural battery composites in electric vehicles

David Carlstedt et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Engineering, Aerospace

Structural Batteries in Aviation: A Preliminary Sizing Methodology

Carlo E. D. Riboldi et al.

JOURNAL OF AEROSPACE ENGINEERING (2020)

Article Engineering, Manufacturing

Tensile properties of multifunctional composites embedded with lithium-ion polymer batteries

K. Pattarakunnan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Chemistry, Physical

18650 vs. 21700 Li-ion cells - A direct comparison of electrochemical, thermal, and geometrical properties

Thomas Waldmann et al.

JOURNAL OF POWER SOURCES (2020)

Editorial Material Chemistry, Physical

High-Performance Structural Batteries

Brandon J. Hopkins et al.

JOULE (2020)

Article Chemistry, Physical

Lithium-ion batteries - Current state of the art and anticipated developments

Michel Armand et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Physical

Mechanically-robust structural lithium-sulfur battery with high energy density

Wenlong Huang et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Polymer reinforced carbon fiber interfaces for high energy density structural lithium-ion batteries

Kathleen Moyer et al.

SUSTAINABLE ENERGY & FUELS (2020)

Article Engineering, Manufacturing

Printing with 3D continuous carbon fiber multifunctional composites via UV-assisted coextrusion deposition

Aditya Thakur et al.

MANUFACTURING LETTERS (2020)

Article Chemistry, Physical

Multifunctional energy storage composite structures with embedded lithium-ion batteries

Purim Ladpli et al.

JOURNAL OF POWER SOURCES (2019)

Article Materials Science, Composites

Thermal and diffusion induced stresses in a structural battery under galvanostatic cycling

David Carlstedt et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Chemistry, Multidisciplinary

Biomimetic Solid-State Zn2+ Electrolyte for Corrugated Structural Batteries

Mingqiang Wang et al.

ACS NANO (2019)

Article Materials Science, Composites

Effects of state of charge on elastic properties of 3D structural battery composites

David Carlstedt et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Review Materials Science, Multidisciplinary

Structural battery composites: a review

Leif E. Asp et al.

FUNCTIONAL COMPOSITES AND STRUCTURES (2019)

Article Materials Science, Composites

Lithium iron phosphate coated carbon fiber electrodes for structural lithium ion batteries

Johan Hagberg et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Article Energy & Fuels

Multifunctional Composites for Future Energy Storage in Aerospace Structures

Till Julian Adam et al.

ENERGIES (2018)

Article Materials Science, Textiles

Perspective on Carbon Fiber Woven Fabric Electrodes for Structural Batteries

Mi Young Park et al.

FIBERS AND POLYMERS (2018)

Article Materials Science, Composites

Multiphysics modeling of mechanical and electrochemical phenomena in structural composites for energy storage: Single carbon fiber micro-battery

Johanna Xu et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)

Article Materials Science, Multidisciplinary

Multifunctional structural lithium ion batteries for electrical energy storage applications

Atif Javaid et al.

MATERIALS RESEARCH EXPRESS (2018)

Article Materials Science, Composites

Multifunctional performance of a carbon fiber UD lamina electrode for structural batteries

Wilhelm Johannisson et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Article Chemistry, Multidisciplinary

Multifunctional Structural Ultrabattery Composite

Chuanzhe Meng et al.

NANO LETTERS (2018)

Article Materials Science, Multidisciplinary

Multifunctional structural lithium-ion battery for electric vehicles

Yancheng Zhang et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2017)

Article Electrochemistry

High Precision Coulometry of Commercial PAN-Based Carbon Fibers as Electrodes in Structural Batteries

Johan Hagberg et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Thermodynamics

Thermal analysis of multifunctional structural battery for satellite applications

Yang Wang et al.

APPLIED THERMAL ENGINEERING (2015)

Article Materials Science, Composites

Performance metrics for structural composites with electrochemical multifunctionality

J. F. Snyder et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

Article Materials Science, Composites

Mechanical, electrical and microstructural characterisation of multifunctional structural power composites

E. S. Greenhalgh et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

Article Materials Science, Composites

Structural power composites

Leif E. Asp et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Article Materials Science, Composites

Multifunctional structure-battery composites for marine systems

J. P. Thomas et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

Article Materials Science, Composites

Multifunctional composite materials for energy storage in structural load paths

L. E. Asp

PLASTICS RUBBER AND COMPOSITES (2013)

Proceedings Paper Electrochemistry

Composite Multifunctional Lithium Ion Batteries

J. Mullenax et al.

RECHARGEABLE LITHIUM AND LITHIUM ION BATTERIES (2012)

Article Electrochemistry

PAN-Based Carbon Fiber Negative Electrodes for Structural Lithium-Ion Batteries

Maria H. Kjell et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Article Engineering, Aerospace

Structural performance of a multifunctional spacecraft structure based on plastic lithium-ion batteries

Samuel C. Roberts et al.

ACTA ASTRONAUTICA (2010)

Article Chemistry, Physical

Design and fabrication of multifunctional structural batteries

Ping Liu et al.

JOURNAL OF POWER SOURCES (2009)

Article Engineering, Aerospace

Satellite multi-functional power structure: feasibility and mass savings

S. C. Roberts et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2008)

Article Materials Science, Multidisciplinary

The design and application of multifunctional structure-battery materials systems

JP Thomas et al.

Article Materials Science, Multidisciplinary

Mechanical design and performance of composite multifunctional materials

JP Thomas et al.

ACTA MATERIALIA (2004)