Related references
Note: Only part of the references are listed.Evaluation of Gamma irradiated Ti6Al4V and Silver alloyed a-C coatings as friction pair via Response Surface Methodology
Lokeswar Patnaik et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)
Mechanical and Scratch behaviour of TiAlN Coated and 3D Printed H13 Tool Steel
Sunil Kumar et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)
Effect of annealing on structural, mechanical and tribological properties of Cr-(CrN/TiAlN) coating
Sunil Kumar et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)
Evaluation of Crack resistance and Adhesive Energy of AlCrN and Ag doped a-C Films deposited on Chrome Nitrided 316 LVM Stainless Steel
Lokeswar Patnaik et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2022)
Wear assessment of Cr2O3-/TiAlN-coated DAC-10 tool steel against steel and Al2O3 counterbodies
Sunil Kumar et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2022)
Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films
Lokeswar Patnaik et al.
SILICON (2022)
Mechanical and tribological assessment of composite AlCrN or a-C: Ag-based thin films for implant application
Lokeswar Patnaik et al.
CERAMICS INTERNATIONAL (2021)
Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study
Sunil Kumar et al.
CERAMICS INTERNATIONAL (2021)
Lubricated sliding of CFRPEEK/AlCrN film tribo-pair and its effect on the mechanical properties and structural integrity of the AlCrN film
Lokeswar Patnaik et al.
MATERIALS CHEMISTRY AND PHYSICS (2021)
Modeling of wear parameters and multi-criteria optimization by Box-Behnken design of AlCrN thin film against gamma-irradiated Ti6Al4V counterbody
Lokeswar Patnaik et al.
CERAMICS INTERNATIONAL (2021)
Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC thin film
Lokeswar Patnaik et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
A comparative study on wear behaviors of hot work and cold work tool steel with same hardness under dry sliding tribological test
Sunil Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Radiation tolerance of nanostructured TiAlN coatings under Ar+ ion irradiation
S. Konstantinov et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Correlation between the Al content and corrosion resistance of TiAlN coatings applied using a PACVD technique
H. Elmkhah et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2020)
Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel
Sunil Kumar et al.
CERAMICS INTERNATIONAL (2020)
Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application
Lokeswar Patnaik et al.
CERAMICS INTERNATIONAL (2020)
Investigation of the Influence of Microdroplets on the Coatings Nanolayer Structure
Sergey Grigoriev et al.
COATINGS (2020)
Structural Aspects of Wear Resistance of Coatings Deposited by Physical Vapor Deposition
V. I. Kolesnikov et al.
PHYSICAL MESOMECHANICS (2020)
Effect of heat treatment and TiN coating on AISI O1 cold work tool steel
Sunil Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Status of nickel free stainless steel in biomedical field: A review of last 10 years and what else can be done
Lokeswar Patnaik et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Tribological performance of titanium nitride coatings: A comparative study on TiN-coated stainless steel and titanium alloy
Magdalena Lepicka et al.
WEAR (2019)
Tribological behavior of patterned TiAlN coatings at elevated temperatures
Zhe Geng et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Wear behavior of TiAlN coated WC tool during micro end milling of Ti-6Al-4V and analysis of surface roughness
K. Vipindas et al.
WEAR (2019)
Tribological properties of nanostructured TiAlN/W2N multilayer coating produced by PVD
Xing Xu et al.
WEAR (2019)
Characteristics and Tribological Behaviors of TiAlN/Cr-Ni Composite Coatings at Elevated Temperatures
Li Jiahong et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Thermal Stability of Cathodic Arc Vapour Deposited TiAlN/AlCrN and AlCrN/TiAlN Coatings on Tungsten Carbide Tool
T. Sampath Kumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
Thermal stability and oxidation resistance of V-alloyed TiAlN coatings
Yu X. Xu et al.
CERAMICS INTERNATIONAL (2018)
Study on the adhesion and tribological behavior of PVD TiA1N coatings with a multi-scale textured substrate surface
Kedong Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Comparative evaluation of performances of TiAlN, AICrN, TiAlN/AlCrN coated carbide cutting tools and uncoated carbide cutting tools on turning Inconel 825 alloy using Grey Relational Analysis
Sampath T. Kumar et al.
SENSORS AND ACTUATORS A-PHYSICAL (2018)
Characterization and machining performance of laser-textured chevron shaped tools coated with AlTiN and AlCrN coatings
Sarvesh Kumar Mishra et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Tribological studies of dual-coating (intermediate hard with top epoxy-graphene-base oil composite layers) on tool steel in dry and lubricated conditions
Vikram Kumar et al.
TRIBOLOGY INTERNATIONAL (2018)
Study on the crack resistance of CrBN composite coatings via nano-indentation and scratch tests
Qianzhi Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
An investigation on the crack resistance of CrN, CrBN and CrTiBN coatings via nanoindentation
Qianzhi Wang et al.
VACUUM (2017)
Scratch adhesion and tribological behaviour of graded Cr/CrN/CrTiN coatings synthesized by closed-field unbalanced magnetron sputtering
Mohammad Sharear Kabir et al.
WEAR (2017)
Effect of mechanical properties of substrate and coating on wear performance of TiN- or DLC-coated 316LVM stainless steel
Magdalena Lepicka et al.
WEAR (2017)
Tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed
A. H. Musfirah et al.
WEAR (2017)
Surface characteristics and wear depth profile of the TiN, TiAlN and AlCrN coated stainless steel in dry sliding wear condition
S. C. Vettivel et al.
SURFACES AND INTERFACES (2017)
Comparative Evaluation of Performances of TiAlN-, AlCrN- and AlCrN/TiAlN-Coated Carbide Cutting Tools and Uncoated Carbide Cutting Tools on Turning EN24 Alloy Steel
T. Sampath Kumar et al.
JOURNAL OF ADVANCED MANUFACTURING SYSTEMS (2017)
Mechanical analysis and high temperature wear behaviour of AlCrN/DLC coated titanium alloy
K. Gangatharan et al.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2016)
Nanoindentation and nanoscratch behavior of electroless deposited nickel-phosphorous coating
M. Sribalaji et al.
MATERIALS CHEMISTRY AND PHYSICS (2016)
Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests
Qianzhi Wang et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Structural optimisation and electrochemical behaviour of AlCrN coatings
Mohan Chen et al.
THIN SOLID FILMS (2016)
Tribological performance of TiN, TiAlN and CrN hard coatings lubricated by MoS2 nanotubes in Polyalphaolefin oil
S. Paskvale et al.
WEAR (2016)
Optimization of wear parameters and their relative effects on TiN coated surface against Ti6Al4V alloy
I. Saravanan et al.
MATERIALS & DESIGN (2016)
Effects of elastic modulus mismatch between coating and substrate on the friction and wear properties of TiN and TiAlN coating systems
Xiao Huang et al.
WEAR (2015)
Formation of nanostructured TiAlN, TiCrN, and TiSiN coatings using reactive magnetron sputtering
F. F. Komarov et al.
JOURNAL OF FRICTION AND WEAR (2014)
Metallurgical Characteristics of TiAlN/AlCrN Coating Synthesized by the PVD Process on a Cutting Insert
T. Sampath Kumar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
The effect of work-hardening and pile-up on nanoindentation measurements
J. D. Gale et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Comparison of TiAlN, AlCrN, and AlCrN/TiAlN coatings for cutting-tool applications
T. Sampath Kumar et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2014)
Experimental investigation on the indentation hardness of precursor derived Si-B-C-N ceramics
Ravindran Sujith et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Structural and mechanical properties of Cr-Al-O-N thin films grown by cathodic arc deposition
A. Khatibi et al.
ACTA MATERIALIA (2012)
A comparative study of titanium nitride (TiN), titanium oxy nitride (TiON) and titanium aluminum nitride (TiAlN), as surface coatings for bio implants
B. Subramanian et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Microstructural, mechanical and wear properties of Cr-Al-B-N coatings deposited by DC reactive magnetron co-sputtering
Chi-Lung Chang et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Influence of the nitriding and TiAlN/TiN coating thickness on the sliding wear behavior of duplex treated AISI H13 steel
Ricardo D. Torres et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Mechanical and tribological properties of Ti/TiAlN duplex coatings on high and low alloy tool steels
Wolfgang Tillmann et al.
VACUUM (2009)
Structure-property relations of arc-evaporated Al-Cr-Si-N coatings
J. Soldan et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Tribological properties of undoped and boron-doped nanocrystalline diamond films
Qj Liang et al.
THIN SOLID FILMS (2008)
Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering
Harish C. Barshilia et al.
APPLIED SURFACE SCIENCE (2007)
High temperature wear resistance of (TiAI)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments
R. Rodriguez-Baracada et al.
WEAR (2007)
Investigations on friction and wear mechanisms of the PVD-TiAlN coated carbide in dry sliding against steels and cast iron
W. Grzesik et al.
WEAR (2006)
Comparison of wear properties of tool steels AISI D2 and O1 with the same hardness
L Bourithis et al.
TRIBOLOGY INTERNATIONAL (2006)
Structural and mechanical properties of nanolayered TiAlN/CrN coatings synthesized by a cathodic arc deposition process
YY Chang et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatings
HC Barshilia et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel
H So et al.
WEAR (2002)
Share Paper
