Related references
Note: Only part of the references are listed.A novel alkali activated magnesium silicate as an effective and mechanically strong adsorbent for methylene blue removal
Kardelen Kaya-Ozkiper et al.
JOURNAL OF HAZARDOUS MATERIALS (2022)
Interactions of sodium chloride solution and calcium silicate hydrate with different calcium to silicon ratios: A molecular dynamics study
Hongyang Deng et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Enhancing the removal efficiency of methylene blue in water by fly ash via a modified adsorbent with alkaline thermal hydrolysis treatment
Nga Thi Dinh et al.
RSC ADVANCES (2021)
Adsorbent materials based on a geopolymer paste for dye removal from aqueous solutions
Ali Maleki et al.
ARABIAN JOURNAL OF CHEMISTRY (2020)
Fe(III) uptake by calcium silicate hydrates
A. Mancini et al.
APPLIED GEOCHEMISTRY (2020)
Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate
Osman Hulusi Oren et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Lightweight geopolymer-expanded glass composites for removal of methylene blue from aqueous solutions
Piotr Rozek et al.
CERAMICS INTERNATIONAL (2020)
Influence of graphene oxide additive on physical, microstructure, adsorption, and photocatalytic properties of calcined kaolinite-based geopolymer ceramic composites
Narumon Lertcumfu et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
Ag- or Cu-modified geopolymer filters for water treatment manufactured by 3D printing, direct foaming, or granulation
Tero Luukkonen et al.
SCIENTIFIC REPORTS (2020)
Mechanical strength and cationic dye adsorption ability of metakaolin-based geopolymer spheres
Valentina Medri et al.
APPLIED CLAY SCIENCE (2020)
Innovation in ceramic foam filters manufacturing process
Vania R. Salvini et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)
Application of alkali-activated materials for water and wastewater treatment: a review
Tero Luukkonen et al.
REVIEWS IN ENVIRONMENTAL SCIENCE AND BIO-TECHNOLOGY (2019)
Effect of foaming agent on physical and mechanical properties of alkali-activated slag foamed concrete
Juan He et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Adsorptive removal of methylene blue from aqueous solution using coal fly ash-derived mesoporous silica material
Ning Yuan et al.
ADSORPTION SCIENCE & TECHNOLOGY (2019)
Processing, properties and applications of highly porous geopolymers: A review
Chengying Bai et al.
CERAMICS INTERNATIONAL (2018)
Biomass fly ash geopolymer monoliths for effective methylene blue removal from wastewaters
Rui M. Novais et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effect of Surfactants on the Structure and Adsorption Efficiency of Hydroxyapatite Nanorods
Manisha Sharma et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)
Alkali Activated Slag Mortars Provide High Resistance to Chloride-Induced Corrosion of Steel
Maria Criado et al.
FRONTIERS IN MATERIALS (2018)
Mechanical and acoustic properties of fiber-reinforced alkali-activated slag foam concretes containing lightweight structural aggregates
M. Mastali et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Alkali-activated materials
John L. Provis
CEMENT AND CONCRETE RESEARCH (2018)
Alkali activated slag foams: The effect of the alkali reaction on foam characteristics
Ailar Hajimohammadi et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Adsorption characteristics of cesium onto mesoporous geopolymers containing nano-crystalline zeolites
N. K. Lee et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2017)
High flow ceramic pot filters
D. van Halem et al.
WATER RESEARCH (2017)
Design of ceramic filters using Clay/Sawdust composites: Effect of pore network on the hydraulic permeability
Martine Youmoue et al.
CERAMICS INTERNATIONAL (2017)
An overview of geopolymers derived from industrial by-products
Ankur Mehta et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Porous biomass fly ash-based geopolymers with tailored thermal conductivity
Rui M. Novais et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Simultaneous removal of Ni(II), As(III), and Sb(III) from spiked mine effluent with metakaolin and blast-furnace-slag geopolymers
Tero Luukkonen et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)
New composites of nanoparticle Cu (I) oxide and titania in a novel inorganic polymer (geopolymer) matrix for destruction of dyes and hazardous organic pollutants
Mahroo Falah et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters
Rui M. Novais et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
Sulphate removal over barium-modified blast-furnace-slag geopolymer
Hanna Runtti et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents
V. Ducman et al.
MATERIALS CHARACTERIZATION (2016)
Incorporation of aluminium in calcium-silicate-hydrates
E. L'Hopital et al.
CEMENT AND CONCRETE RESEARCH (2015)
Mix design, properties and cost analysis of fly ash-based geopolymer foam
Z. Abdollahnejad et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Preparation of phosphoric acid-based geopolymer foams using limestone as pore forming agent - Thermal properties by in situ XRPD and Rietveld refinements
Magdalena Lassinantti Gualtieri et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties
P. Hlavacek et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash
Idawati Ismail et al.
CEMENT & CONCRETE COMPOSITES (2014)
Geopolymer foams by gelcasting
Marcelo Strozi Cilla et al.
CERAMICS INTERNATIONAL (2014)
Effect of process parameters on the physical properties of porous geopolymers obtained by gelcasting
Marcelo Strozi Cilla et al.
CERAMICS INTERNATIONAL (2014)
Geopolymer foam concrete: An emerging material for sustainable construction
Zuhua Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Fly ash-based geopolymer as a novel photocatalyst for degradation of dye from wastewater
Yaojun Zhang et al.
PARTICUOLOGY (2013)
Non-autoclaved high strength cellular concrete from alkali activated slag
H. Esmaily et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Mechanical properties, modeling and design of porous clay ceramics
I. Yakub et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Ceramic Filters Impregnated with Silver Nanoparticles for Point-of-Use Water Treatment in Rural Guatemala
Erin N. Kallman et al.
JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE (2011)
The influence of using Jordanian natural zeolite on the adsorption, physical, and mechanical properties of geopolymers products
Rushdi Ibrahim Yousef et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
I. Lecomte et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)
A comparative adsorption study with different industrial wastes as adsorbents for the removal of cationic dyes from water
A Bhatnagar et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2005)
Carbon nanotubes prepared in situ in a cellular ceramic by the gelcasting-foam method
S Rul et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Share Paper
