Related references
Note: Only part of the references are listed.Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency-a review
Emad Omrani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables
Jaswinder Singh et al.
CERAMICS INTERNATIONAL (2016)
Dry sliding wear investigation of A16082/Gr metal matrix composites by response surface methodology
Pardeep Sharma et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Characterization of hybrid aluminum matrix composites for advanced applications - A review
Jaswinder Singh et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Study of tribological properties on Al/Al2O3/MoS2 hybrid composite processed by powder metallurgy
K. Kanthavel et al.
ALEXANDRIA ENGINEERING JOURNAL (2016)
Microstructure evolution and tribological properties for new A1Si9Cu3/5%GrCu composite
Petru Moldovan et al.
COMPOSITES PART B-ENGINEERING (2015)
Effect of heat treatment on tribological behavior of zinc aluminum alloy reinforced with graphite and SIC particles for journal bearing
T. S. Kiran et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2015)
Effect of the graphite content on the tribological properties of hybrid Al/SiC/Gr composites processed by powder metallurgy
Adalet Zeren
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2015)
Tribological characterization of Al7075-graphite composites fabricated by mechanical alloying and hot extrusion
R. Deaquino-Lara et al.
MATERIALS & DESIGN (2015)
Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites
I. Balasubramanian et al.
MATERIALS & DESIGN (2015)
Microstructure and wear resistance of FeAl/Al2O3 intermetallic composite coating prepared by atmospheric plasma spraying
Bo Song et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Wear Behavior of Aluminum Alloys at Slow Sliding Speeds
M. Ruiz-Andres et al.
TRIBOLOGY TRANSACTIONS (2015)
Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
Michael Oluwatosin Bodunrin et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Wear and mechanical characteristics of Al 7075/graphite composites
A. Baradeswaran et al.
COMPOSITES PART B-ENGINEERING (2014)
Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites
A. Baradeswaran et al.
COMPOSITES PART B-ENGINEERING (2014)
Functional Metal Matrix Composites: Self-lubricating, Self-healing, and Nanocomposites-An Outlook
Afsaneh Dorri Moghadam et al.
JOM (2014)
Microstructure and mechanical properties of 6061 Al alloy based composites with SiC nanoparticles
A. J. Knowles et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Study on the load partition behaviors of high particle content B4C/Al composites in compression
Bin Liu et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Microstructural analysis and mechanical characterization of aluminum matrix nanocomposites reinforced with uncoated and Cu-coated alumina particles
H. Beygi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion
Kaveh Edalati et al.
WEAR (2014)
Tribological behaviour of powder metallurgy-processed aluminium hybrid composites with the addition of graphite solid lubricant
P. Ravindran et al.
CERAMICS INTERNATIONAL (2013)
Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites
K. Umanath et al.
COMPOSITES PART B-ENGINEERING (2013)
Investigation of microstructure and mechanical properties of aluminum hybrid nano-composites with the additions of solid lubricant
P. Ravindran et al.
MATERIALS & DESIGN (2013)
Tribological properties of powder metallurgy - Processed aluminium self lubricating hybrid composites with SiC additions
P. Ravindran et al.
MATERIALS & DESIGN (2013)
A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis
Ravinder Kumar et al.
MATERIALS & DESIGN (2013)
Application of factorial techniques to study the wear of Al hybrid composites with graphite addition
P. Ravindran et al.
MATERIALS & DESIGN (2012)
Influence of small amount of sintering additives on unlubricated sliding wear properties of SiC ceramics
B. V. Manoj Kumar et al.
CERAMICS INTERNATIONAL (2011)
Effect of SiC content on the processing, compaction behavior, and properties of Al6061/SiC/Gr hybrid composites
Soheil Mahdavi et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites
R. N. Rao et al.
MATERIALS & DESIGN (2011)
Effect of the Graphite Content on the Tribological Behavior of Al/Gr and Al/30SiC/Gr Composites Processed by In Situ Powder Metallurgy (IPM) Method
S. Mahdavi et al.
TRIBOLOGY LETTERS (2011)
Effect of extrusion ratio on wear behaviour of hot extruded Al6061-SiCp (Ni-P coated) composites
C. S. Ramesh et al.
WEAR (2011)
Effect of addition of graphite particulates on the wear behaviour in aluminium-silicon carbide-graphite composites
S. Suresha et al.
MATERIALS & DESIGN (2010)
Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites
R. N. Rao et al.
MATERIALS & DESIGN (2010)
被撤回的出版物: Effect of heat treatment on the sliding wear behaviour of aluminium alloy (Al-Zn-Mg) hard particle composite (Retracted article. See vol. 134, pg. 457, 2019)
R. N. Rao et al.
TRIBOLOGY INTERNATIONAL (2010)
Dry Sliding Friction and Wear Properties of Al-25Zn-3Cu-(0-5)Si Alloys in the As-Cast and Heat-Treated Conditions
Temel Savaskan et al.
TRIBOLOGY LETTERS (2010)
Development and performance analysis of novel cast copper-SiC-Gr hybrid composites
C. S. Ramesh et al.
MATERIALS & DESIGN (2009)
Wear behavior of Al-Mg-Cu-based composites containing SiC particles
Adel Mahamood Hassan et al.
TRIBOLOGY INTERNATIONAL (2009)
Study of machinable SiC/Gr/Al composites
Jinfeng Leng et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Developing a mathematical model to evaluate wear rate of AA7075/SiCp powder metallurgy composites
S. Kumar et al.
WEAR (2008)
Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite
S. Basavarajappa et al.
WEAR (2007)
Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites
S. Basavarajappa et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2006)
The fabrication and wear properties of C/Al and (C plus SiC)/Al composites based on wood template
Tian-Chi Wang et al.
MATERIALS LETTERS (2006)
High stress abrasive wear behaviour of aluminium hard particle composites: Effect of experimental parameters, particle size and volume fraction
DP Mondal et al.
TRIBOLOGY INTERNATIONAL (2006)
The role of graphite particles in the high-temperature wear of copper hybrid composites against steel
YZ Zhan et al.
MATERIALS & DESIGN (2006)
Effect of SiC addition and running-in-wear on the sliding wear behaviour of AI-Zn-Mg aluminium alloy
DP Mondal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Microstructure and mechanical properties of hot-pressed Al2O3/TiC ceramic composites with the additions of solid lubricants
JX Deng et al.
CERAMICS INTERNATIONAL (2005)
Dry sliding friction and wear properties of Al2O3 and carbon short fibres reinforced Al-12Si alloy hybrid composites
J Du et al.
WEAR (2004)
Graphite and SiC hybrid particles reinforced copper composite and its tribological characteristic
YZ Zhan et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2003)
Aluminium matrix composites: Challenges and opportunities
MK Surappa
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2003)
The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites
AR Riahi et al.
WEAR (2001)
Sliding wear map for the magnesium alloy Mg-9Al-0.9 Zn (AZ91)
H Chen et al.
WEAR (2000)
Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs
B Venkataraman et al.
WEAR (2000)
Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite
XY Li et al.
WEAR (2000)
Experimental analysis of the tribological behavior of electroless nickel-coated graphite particles in aluminum matrix composites under reciprocating motion
HY Chu et al.
WEAR (2000)
Share Paper
