Related references
Note: Only part of the references are listed.Whole-Voltage-Range Oxygen Redox in P2-Layered Cathode Materials for Sodium-Ion Batteries
Xun-Lu Li et al.
ADVANCED MATERIALS (2021)
Tuning Sodium Occupancy Sites in P2-Layered Cathode Material for Enhancing Electrochemical Performance
Qin-Chao Wang et al.
ADVANCED ENERGY MATERIALS (2021)
P2/O3 biphasic Fe/Mn-based layered oxide cathode with ultrahigh capacity and great cyclability for sodium ion batteries
Cong Chen et al.
NANO ENERGY (2021)
Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery
Chenchen Wang et al.
NATURE COMMUNICATIONS (2021)
Reducing Defects Density and Enhancing Hole Extraction for Efficient Perovskite Solar Cells Enabled by π-Pb2+ Interactions
Lirong Wen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Boron-doped sodium layered oxide for reversible oxygen redox reaction in Na-ion battery cathodes
Yu-Jie Guo et al.
NATURE COMMUNICATIONS (2021)
Spinel/Post-spinel engineering on layered oxide cathodes for sodium-ion batteries
Yan-Fang Zhu et al.
ESCIENCE (2021)
Mitigation of Jahn-Teller distortion and Na+/vacancy ordering in a distorted manganese oxide cathode material by Li substitution
Yanchen Liu et al.
CHEMICAL SCIENCE (2021)
Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?
Qiannan Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2021)
Hierarchical Engineering of Porous P2-Na2/3Ni1/3Mn2/3O2 Nanofibers Assembled by Nanoparticles Enables Superior Sodium-Ion Storage Cathodes
Yongchang Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode
Yao Xiao et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
High-Performance Cathode of Sodium-Ion Batteries Enabled by a Potassium-Containing Framework of K0.5Mn0.7Fe0.2Ti0.1O2
Yan-Song Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Revisiting the Na2/3Ni1/3Mn2/3O2 Cathode: Oxygen Redox Chemistry and Oxygen Release Suppression
Yi Zhang et al.
ACS CENTRAL SCIENCE (2020)
Lattice Compensation to Jahn-Teller Distortion in Na-Rich Manganese Hexacyanoferrate for Li-Ion Storage: An Operando Study
Angelo Mullaliu et al.
ACS APPLIED ENERGY MATERIALS (2020)
Rational design of layered oxide materials for sodium-ion batteries
Chenglong Zhao et al.
SCIENCE (2020)
K(+)modulated K+/vacancy disordered layered oxide for high-rate and high-capacity potassium-ion batteries
Zhitong Xiao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
A New P2-Type Layered Oxide Cathode with Extremely High Energy Density for Sodium-Ion Batteries
Jang-Yeon Hwang et al.
ADVANCED ENERGY MATERIALS (2019)
A New Strategy to Build a High-Performance P′2-Type Cathode Material through Titanium Doping for Sodium-Ion Batteries
Yun Ji Park et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Single crystalline nanorods of Na0.44MnO2 enhanced by reduced graphene oxides as a high rate and high capacity cathode material for sodium-ion batteries
Bi Fu et al.
ELECTROCHIMICA ACTA (2019)
An Ordered Ni6-Ring Superstructure Enables a Highly Stable Sodium Oxide Cathode
Peng-Fei Wang et al.
ADVANCED MATERIALS (2019)
Boosting fast and durable sodium-ion storage by tailoring well-shaped Na0.44MnO2 nanowires cathode
Yongchang Liu et al.
ELECTROCHIMICA ACTA (2019)
Ti Substitution Facilitating Oxygen Oxidation in Na2/3Mg1/3Ti1/6Mn1/2O2 Cathode
Chenglong Zhao et al.
CHEM (2019)
P2-Na0.67AlxMn1-xO2: Cost-Effective, Stable and High-Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility
Xiangsi Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries
Qin-Chao Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Native Vacancy Enhanced Oxygen Redox Reversibility and Structural Robustness
Yejing Li et al.
ADVANCED ENERGY MATERIALS (2019)
A novel P3-type Na2/3Mg1/3Mn2/3O2 as high capacity sodium-ion cathode using reversible oxygen redox
Bohang Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Anionic Redox Reaction-Induced High-Capacity and Low-Strain Cathode with Suppressed Phase Transition
Xiaohui Rong et al.
JOULE (2019)
Tungsten Nitride/Carbon Cloth as Bifunctional Electrode for Effective Polysulfide Recycling
Yange Wang et al.
ACS APPLIED ENERGY MATERIALS (2019)
Layered Oxide Cathodes for Sodium-Ion Batteries: Phase Transition, Air Stability, and Performance
Peng-Fei Wang et al.
ADVANCED ENERGY MATERIALS (2018)
Na+/vacancy disordering promises high-rate Na-ion batteries
Peng-Fei Wang et al.
SCIENCE ADVANCES (2018)
High Anode Performance of in Situ Formed Cu2Sb Nanoparticles Integrated on Cu Foil via Replacement Reaction for Sodium-Ion Batteries
Liubin Wang et al.
ACS ENERGY LETTERS (2017)
Electrolyte design strategies and research progress for room-temperature sodium-ion batteries
Haiying Che et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Rechargeable aqueous zinc-manganese dioxide batteries with high energy and power densities
Ning Zhang et al.
NATURE COMMUNICATIONS (2017)
P′2-Na2/3Mn0.9Me0.1O2 (Me = Mg, Ti, Co, Ni, Cu, and Zn): Correlation between Orthorhombic Distortion and Electrochemical Property
Shinichi Kumakura et al.
CHEMISTRY OF MATERIALS (2017)
Enhanced Performance of P2-Na0.66(Mn0.54Co0.13Ni0.13)O2 Cathode for Sodium-Ion Batteries by Ultrathin Metal Oxide Coatings via Atomic Layer Deposition
Karthikeyan Kaliyappan et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Red phosphorus nanoparticles embedded in porous N-doped carbon nanofibers as high-performance anode for sodium-ion batteries
Yongchang Liu et al.
ENERGY STORAGE MATERIALS (2017)
Sodium and Manganese Stoichiometry of P2-Type Na2/3MnO2
Shinichi Kumakura et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
Structurally stable Mg-doped P2-Na2/3Mn1-yMgyO2 sodium-ion battery cathodes with high rate performance: insights from electrochemical, NMR and diffraction studies
Raphaele J. Clement et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Recent advances in titanium-based electrode materials for stationary sodium-ion batteries
Shaohua Guo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
High-Performance Olivine NaFePO4 Microsphere Cathode Synthesized by Aqueous Electrochemical Displacement Method for Sodium Ion Batteries
Yongjin Fang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Chemical etching of manganese oxides for electrocatalytic oxygen reduction reaction
Kaixiang Lei et al.
CHEMICAL COMMUNICATIONS (2015)
P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries
Yuesheng Wang et al.
NATURE COMMUNICATIONS (2015)
Poly(diphenylaminesulfonic acid sodium) as a cation-exchanging organic cathode for sodium batteries
Y. F. Shen et al.
ELECTROCHEMISTRY COMMUNICATIONS (2014)
New P2-Na0.70Mn0.60Ni0.30Co0.10O2 Layered Oxide as Electrode Material for Na-Ion Batteries
Jun Yoshida et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Effect of Surface Manganese Valence of Manganese Oxides on the Activity of the Oxygen Reduction Reaction in Alkaline Media
Qiwen Tang et al.
ACS CATALYSIS (2014)
Semiempirical GGA-type density functional constructed with a long-range dispersion correction
Stefan Grimme
JOURNAL OF COMPUTATIONAL CHEMISTRY (2006)
Ab initio study of sodium ordering in Na0.75CoO2 and its relation to Co3+/Co4+ charge ordering -: art. no. 172103
YS Meng et al.
PHYSICAL REVIEW B (2005)
Share Paper
