4.6 Article

An Al-doped TiO2 interfacial layer for effective hole injection characteristics of quantum-dot light-emitting diodes

Related references

Note: Only part of the references are listed.
Article Multidisciplinary Sciences

Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport

Tao Fang et al.

Summary: This study demonstrates green perovskite QLEDs with improved efficiency and operational lifetime by balancing charge injection, showing high color saturation and excellent external quantum efficiency. Modulating charge balance significantly enhances the operational lifetime of the devices, further highlighting the potential of perovskite QLEDs for practical applications.

SCIENCE BULLETIN (2021)

Article Chemistry, Physical

Magnetron-sputtered amorphous V2O5 hole injection layer for high performance quantum dot light-emitting diode

Seung-Gyun Choi et al.

Summary: A novel V2O5 film was developed in this study to replace traditional PEDOT:PSS or solution-processed metal oxide HIL in QLEDs. By optimizing the sputtering conditions and oxygen flow rate, the V2O5 film achieved high optical transparency and a suitable work function, resulting in excellent performance of QLEDs.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Continuously Graded Quantum Dots: Synthesis, Applications in Quantum Dot Light-Emitting Diodes, and Perspectives

Yang Cheng et al.

Summary: With the development of cg-QDs, significant progress has been made in the application of LED in the field of QLED, focusing on the synthesis and advantages to effectively solve a series of challenges faced by QLED. Future research will focus on methods to further optimize and improve the performance of QLEDs.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Chemistry, Analytical

Effect of Plasma-Enhanced Atomic Layer Deposition on Oxygen Overabundance and Its Influence on the Morphological, Optical, Structural, and Mechanical Properties of Al-Doped TiO2 Coating

William Chiappim et al.

Summary: PEALD method was used to grow high-quality TiO2/Al2O3 nanolaminate films, which exhibited oxygen overabundance in crystalline phase and oxygen lack in amorphous phase. Doping TiO2 with Al2O3 monolayers allows for adjusting material parameters and has crucial applications in various technological devices.

MICROMACHINES (2021)

Article Chemistry, Multidisciplinary

Composition and properties of RF-sputter deposited titanium dioxide thin films

Jesse Daughtry et al.

Summary: The research aims to examine the properties required for producing thin films of TiO2 using RF plasma, with the ability to modify the films through heating to induce defects and change their characteristics. Different deposition regimes were studied to minimize unwanted contaminants and the resulting TiO2 films showed a lower cost alternative to single-crystal TiO2 with known elemental composition and modifiable properties.

NANOSCALE ADVANCES (2021)

Review Chemistry, Multidisciplinary

Approaches for Long Lifetime Organic Light Emitting Diodes

Sujith Sudheendran Swayamprabha et al.

Summary: OLEDs have shown great potential in the lighting and display industry, with significant improvements in efficiency and lifetime over the past three decades. However, operational lifetime remains a challenge for commercial applications. This review provides a detailed overview of factors affecting OLED lifetime and outlines various degradation phenomena and failure mechanisms, along with proposed solutions to enhance device stability and lifespan.

ADVANCED SCIENCE (2021)

Article Physics, Applied

Demonstration of low forward voltage InGaN-based red LEDs

Daisuke Iida et al.

APPLIED PHYSICS EXPRESS (2020)

Article Nanoscience & Nanotechnology

Exciton Quenching due to Hole Trap Formation in Aged Polymer Light-Emitting Diodes

Irina Roerich et al.

ADVANCED ELECTRONIC MATERIALS (2020)

Article Chemistry, Physical

Interpreting time-resolved photoluminescence of perovskite materials

Emmanuel Pean et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

Review Materials Science, Multidisciplinary

Operational stability of perovskite light emitting diodes

Qi Dong et al.

JOURNAL OF PHYSICS-MATERIALS (2020)

Article Chemistry, Multidisciplinary

A zinc non-halide dopant strategy enables efficient perovskite CsPbI3 quantum dot-based light-emitting diodes

Jinhang Li et al.

MATERIALS CHEMISTRY FRONTIERS (2020)

Article Materials Science, Multidisciplinary

Degradation of quantum dot light emitting diodes, the case under a low driving level

Xulan Xue et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Materials Science, Multidisciplinary

Effect of Al doping on the carrier transport characteristics of TiO2 thin films anchored on glass substrates

Shreesha Bhat et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)

Article Chemistry, Physical

Characterization of Electronic Transport through Amorphous TiO2 Produced by Atomic Layer Deposition

Paul Nunez et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Chemistry, Multidisciplinary

Stability of Quantum Dots, Quantum Dot Films, and Quantum Dot Light-Emitting Diodes for Display Applications

Hyungsuk Moon et al.

ADVANCED MATERIALS (2019)

Article Multidisciplinary Sciences

Highly stable QLEDs with improved hole injection via quantum dot structure tailoring

Weiran Cao et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

Engineering triangular carbon quantum dots with unprecedented narrow bandwidth emission for multicolored LEDs

Fanglong Yuan et al.

NATURE COMMUNICATIONS (2018)

Article Materials Science, Ceramics

Fabrication of highly homogeneous Al-doped TiO2 nanotubes by nanolamination of atomic layer deposition

Chung-Yi Su et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Materials Science, Multidisciplinary

A solution-processable inorganic hole injection layer that improves the performance of quantum-dot light-emitting diodes

Sang Moo Lee et al.

CURRENT APPLIED PHYSICS (2017)

Article Chemistry, Physical

Enhancement of power conversion efficiency of dye sensitized solar cells by modifying mesoporous TiO2 photoanode with Al-doped TiO2 layer

Ran Li et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2016)

Article Physics, Applied

Effect of oxygen plasma treatment on CdSe/CdZnS quantum-dot light-emitting diodes

Nam-Kwang Cho et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2014)

Article Chemistry, Physical

Efficient luminescence and photocatalytic behaviour in ultrafine TiO2 particles synthesized by arrested precipitation

Sreejith Kaniyankandy et al.

JOURNAL OF MATERIALS CHEMISTRY (2009)

Article Multidisciplinary Sciences

White organic light-emitting diodes with fluorescent tube efficiency

Sebastian Reineke et al.

NATURE (2009)

Article Chemistry, Analytical

Aluminum-doped TiO2 nano-powders for gas sensors

Young Jin Choi et al.

SENSORS AND ACTUATORS B-CHEMICAL (2007)

Article Materials Science, Coatings & Films

Chemical and thermal treatment of PEDOT:PSS thin films for use in organic light emitting diodes

TP Nguyen et al.

SURFACE & COATINGS TECHNOLOGY (2004)