☆ 4.0 Review

Material Design for Enhancing Properties of 3D Printed Polymer Composites for Target Applications

TECHNOLOGIES (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Multi-stimuli responsive and reversible soft actuator engineered by layered fibrous matrix and hydrogel micropatterns

Kanghee Cho et al.

Summary: The study proposes an engineered multi-responsive actuator fabrication platform by combining electrospinning and hydrogel lithography techniques, successfully demonstrating a soft actuator with reversible bending and unbending capabilities. Computational modeling is used to elucidate the bending mechanism of the actuator and regulate the bending direction, showing that the fabrication process is versatile and adaptable.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Printable Smart Materials and Devices: Strategies and Applications

Meng Su et al.

Summary: Smart materials can sense and respond to environmental conditions, and patterning is key to achieving arrays of functional devices. Significant progress in printing methods has opened up new possibilities for manufacturing various intelligent devices. However, challenges and drawbacks still need to be overcome to achieve controllable modulation between smart materials and device performance.

CHEMICAL REVIEWS (2022)

Add to Collection

Article Polymer Science

Self-healing in high impact polystyrene (HIPS) composites via embedded non-toxic solvent-filled microcapsules

Vinita V. Shinde et al.

Summary: Polymer composites are commonly used in various industries for their desirable properties, but replacing damaged materials can be costly and time-consuming. Therefore, this study focuses on developing self-healing composite materials using environmentally friendly solvents. By incorporating double-walled microcapsules into thermoplastic composites, the self-healing efficiency can reach up to 64%, showing potential for industrial applications.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Emergency Medicine

Optimal plate position in minimally invasive plate osteosynthesis for mid-shaft clavicle fractures: simulation using 3D-printed models of actual clinical cases

Hyun Chul Shon et al.

Summary: This study evaluated the optimal anatomical locking plate position for clavicle fractures using three-dimensional printed models. The results showed that the anatomical plate fitted well when positioned in the middle of the clavicle for fractures with a location ranging from 40 to 60%.

EUROPEAN JOURNAL OF TRAUMA AND EMERGENCY SURGERY (2021)

Add to Collection

Article Engineering, Aerospace

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/ PEEK and GF/PEEK

Peng Wang et al.

Summary: FDM offers unique advantages in rapid prototyping, with enhanced mechanical properties achieved through the use of fiber reinforcement composites. Research shows that adjusting printing parameters can significantly improve the mechanical properties of printed parts.

CHINESE JOURNAL OF AERONAUTICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications

Xiaoyan Xu et al.

Summary: Vat photo-polymerization 3D printing technology offers high resolution and fast printing speeds, making it ideal for creating custom medical devices and drug delivery systems. Its adoption is expected to advance personalized healthcare systems.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Review Engineering, Biomedical

3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications

Danial Khorsandi et al.

Summary: 3D and 4D printing technologies enable precise and expedited manufacturing of a wide range of objects, including those used in dentistry such as surgical drill guides, crowns, bridges, and implants. This review highlights the available 3D printing technologies and materials in dentistry, as well as recent applications to show the progress in this field.

ACTA BIOMATERIALIA (2021)

Add to Collection

Article Energy & Fuels

Ultrahigh-Resolution 3D Imaging for Quantifying the Pore Nanostructure of Shale and Predicting Gas Transport

Mohamed Garum et al.

Summary: The study focuses on characterizing the pore and fracture microstructures in shale using Nano-CT and FIB-SEM techniques, revealing differences in imaging nanopore structure and shale petrophysical properties measurements between the two methods.

ENERGY & FUELS (2021)

Add to Collection

Article Multidisciplinary Sciences

3D printing of highly stretchable hydrogel with diverse UV curable polymers

Qi Ge et al.

Summary: This study presents a new multimaterial 3D printing approach for fabricating complex hybrid 3D structures consisting of hydrogels and UV-curable polymers, paving the way for multifunctional soft devices and machines.

SCIENCE ADVANCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

3D Printing of Flexible Strain Sensor Array Based on UV-Curable Multiwalled Carbon Nanotube/Elastomer Composite

Ting Xiao et al.

Summary: The Internet of Things (IoT) is expected to significantly enhance various aspects of society, particularly in soft robotics, structural health monitoring, and human motion detection. This study developed a 3D printing technology to fabricate high-performance flexible strain sensors based on a multiwalled carbon nanotube/elastomer (MWCNT/EA) composite, demonstrating excellent sensitivity, linearity, detectable strain range, mechanical durability, and environmental responsiveness. Additionally, a strain sensor array was developed to further showcase the high performance of the 3D printed device in sensing external stimuli distribution.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printing Replication of Porous Media for Lab-Scale Characterization Research

Ahmed G. Almetwally et al.

Summary: The study explores the use of 3D printing technology to create replicas of porous-rock samples with different scales and configurations in the laboratory, to validate the effectiveness of analytical or numerical models of oil and gas reservoirs. The workflow for creating these replicas indicates a novel approach to accurately simulate the characteristics of real oil and gas reservoirs in a laboratory setting.

ACS OMEGA (2021)

Add to Collection

Review Polymer Science

Anion exchange polyelectrolytes for membranes and ionomers

Nanjun Chen et al.

Summary: Anion exchange membrane fuel cells (AEMFCs) are considered a low-cost alternative to proton exchange membrane fuel cells (PEMFCs) for clean energy conversion, as they utilize non-platinum group metals as electrocatalysts under alkaline conditions. The development of high-performance anion-exchange polyelectrolytes (AEPs) has led to significant progress in power density and durability of AEMFCs, making them comparable to or even better than PEMFCs.

PROGRESS IN POLYMER SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

All printed soft actuators based on ionic liquid/polymer hybrid materials

D. M. Correia et al.

Summary: This study developed printable materials for soft actuators based on ionic liquids and fluorinated polymers, demonstrating high ionic conductivity and large displacement, indicating their potential for applications.

APPLIED MATERIALS TODAY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Design of an Electro-Stimulated Hydrogel Actuator System with Fast Flexible Folding Deformation under a Low Electric Field

Yerin Shin et al.

Summary: The study designed two electrically responsive hydrogels with fast response properties that can achieve bending deformation even under a low electric field.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

3D Printing of Electrically Responsive PVC Gel Actuators

Zijun Wang et al.

Summary: This study presents a strategy for 3D printing PVC gel actuators with electric control capabilities, demonstrating the potential of using soft actuators in various shapes and movements. The developed 3D printing technique expands the application possibilities of electrically responsive soft materials in engineering fields.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Intra-Operative Bioprinting of Hard, Soft, and Hard/Soft Composite Tissues for Craniomaxillofacial Reconstruction

Kazim K. Moncal et al.

Summary: The study demonstrates the intra-operative bioprinting of various craniomaxillofacial tissues directly on rats, including bone, skin, and composite tissues. A novel osteogenic hard tissue ink and droplet-based bioprinting technology facilitated substantial bone regeneration and accelerated wound closure in a stratified arrangement. The use of a hybrid approach resulted in significant skin wound closure and bone coverage, showcasing the potential for bioprinting technologies in clinical CMF defect reconstruction.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Characterization and microfabrication of natural porous rocks: From micro-CT imaging and digital rock modelling to micro-3D-printed rock analogs

Rui Song et al.

Summary: This study introduces a customized workflow of producing 3D-printed rock analogs from micro-CT images combined with digital rock modeling. By imaging three types of natural rock specimens with micro-CT and processing them as inputs for two types of 3D printing techniques, rock analogs are printed at multiple magnifications from original CT volume in five curable resin materials, and petrophysical parameters are acquired through helium pycnometry and mercury intrusion porosimetry. The study evaluates the accuracy of 3D-printed rock analogs by comparing the measured results with benchmark data derived from digital rock modeling, discussing both advantages and challenges related to reproducing the real pore structure of natural rock.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Add to Collection

Review Instruments & Instrumentation

A review of vascular networks for self-healing applications

Yasmina Shields et al.

Summary: The development of smart self-healing materials inspired by vascular networks in biological systems has addressed limitations of intrinsic and capsule-based self-healing systems. Innovation in additive manufacturing techniques has allowed for more complex network configurations optimizing fluid distribution and healing potential in polymer and composite materials. This review provides an overview of progress, limitations, design approaches, fabrication methods, healing mechanisms, and applications of embedded vascular networks in self-healing materials, highlighting research gaps and future directions.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative Assessment of Ionic Liquid-Based Soft Actuators Prepared by Film Casting Versus Direct Ink Writing

Daniela M. Correia et al.

Summary: The study investigated the blending of ionic liquids with poly(vinylidene fluoride) using printing techniques to develop advanced materials for sensors and actuators. The results showed that the printing process limits spherulites growth, leading to higher ionic conductivity and larger bending displacement in the samples. The findings confirm the suitability of printing technologies for the fabrication of high-performance soft actuators.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Effect of 3D printing process parameters on the impact strength of onyx-Glass fiber reinforced composites

P. Sethu Ramalingam et al.

Summary: Fused deposition modeling (FDM) is a widely used additive manufacturing method that can fabricate quality items with advanced geometries at affordable costs. This study focuses on the impact effects of onyx glass fiber 3D printed composites, finding that higher infill densities lead to better quality and hexagonal designs show optimal energy absorption.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing Materials for Soft Robotics

Ela Sachyani Keneth et al.

Summary: Soft robotics, created from highly compliant materials, is a burgeoning field with diverse applications. 3D printing offers a novel approach to forming complex objects in the realm of soft robotics, with a focus on material advancements and fabrication challenges.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Electrostatic expansion of polyelectrolyte microgels: Effect of solvent quality and added salt

Carlos G. Lopez et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Interdigitated Dielectric Elastomer Actuators

Alex Chortos et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Robotics

Pre-programmed Tri-layer Electro-Thermal Actuators Composed of Shape Memory Polymer and Carbon Nanotubes

Ela Sachyani Keneth et al.

SOFT ROBOTICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of Humidity Sensor Using 3D Printable Polymer Composite Containing Boron-Doped Diamonds and LiCl

Umme Kalsoom et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Ceramics

Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application

Sudip Mondal et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Materials Science, Multidisciplinary

A review of 3D bio-printing for bone and skin tissue engineering: a commercial approach

Nima Beheshtizadeh et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Self-healing polymers with nanomaterials and nanostructures

Lei Zhai et al.

NANO TODAY (2020)

Add to Collection

Article Multidisciplinary Sciences

Aspiration-assisted bioprinting for precise positioning of biologics

Bugra Ayan et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Geosciences, Multidisciplinary

Fused Filament Fabrication 3-D Printing of Reactive Porous Media

Ishan S. Anjikar et al.

GEOPHYSICAL RESEARCH LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries

Song Li et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Robotics

Fluidic Fabric Muscle Sheets for Wearable and Soft Robotics

Mengjia Zhu et al.

SOFT ROBOTICS (2020)

Add to Collection

Review Polymer Science

The swollen polymer network hypothesis: Quantitative models of hydrogel swelling, stiffness, and solute transport

Nathan R. Richbourg et al.

PROGRESS IN POLYMER SCIENCE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Progress in achieving high-performance piezoresistive and capacitive flexible pressure sensors: A review

Wufan Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Highly-Safe and Ultra-Stable All-Flexible Gel Polymer Lithium Ion Batteries Aiming for Scalable Applications

Wei Shen et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Experimental investigation of 3D printed rock samples replicas

A. G. Almetwally et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2020)

Add to Collection

Review Biochemical Research Methods

Recent Advances in the Construction of Flexible Sensors for Biomedical Applications

Nan Zhou et al.

BIOTECHNOLOGY JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Rapid 3D Printing of Electrohydraulic (HASEL) Tentacle Actuators

Maura R. O'Neill et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Lanthanide-Ion-Coordinated Supramolecular Hydrogel Inks for 3D Printed Full-Color Luminescence and Opacity-Tuning Soft Actuators

Yuan Yao et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Stereolithography Three-Dimensional Printing Solid Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Yingjie He et al.

NANO LETTERS (2020)

Add to Collection

Review Chemistry, Physical

An Overview of Additive Manufacturing Technologies-A Review to Technical Synthesis in Numerical Study of Selective Laser Melting

Abbas Razavykia et al.

MATERIALS (2020)

Add to Collection

Review Polymer Science

3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication-A Review

Andrew N. Dickson et al.

POLYMERS (2020)

Add to Collection

Article Multidisciplinary Sciences

Nanofabrication of synthetic nanoporous geomaterials: from nanoscale-resolution 3D imaging to nano-3D-printed digital (shale) rock

Jan Goral et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Stereolithography 3D Printing of Microcapsule Catalyst-Based Self-Healing Composites

Vinita V. Shinde et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Toward safer solid-state lithium metal batteries: a review

Zhenkang Wang et al.

NANOSCALE ADVANCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Additive manufacturing of self-healing elastomers

Kunhao Yu et al.

NPG ASIA MATERIALS (2019)

Add to Collection

Article Engineering, Geological

Combining Microtomography, 3D Printing, and Numerical Simulations to Study Scale Effects on the Permeability of Porous Media

Luan C. de S. M. Ozelim et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2019)

Add to Collection

Article Energy & Fuels

Microstructure characteristics and fractal analysis of 3D-printed sandstone using micro-CT and SEM-EDS

Lingyun Kong et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

Add to Collection

Review Chemistry, Analytical

3D Printed Sensors for Biomedical Applications: A Review

Tao Han et al.

SENSORS (2019)

Add to Collection

Article Polymer Science

Additive Manufacturing of PLA-Based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Dimensional Accuracy and Texture

Miguel Angel Caminero et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Freestanding MXene Architectures for Current-Collector-Free Supercapacitors

Wenji Yang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Robotics

Robotic Artificial Muscles: Current Progress and Future Perspectives

Jun Zhang et al.

IEEE TRANSACTIONS ON ROBOTICS (2019)

Add to Collection

Article Polymer Science

Thermo-reversible crosslinked natural rubber: A Diels-Alder route for reuse and self-healing properties in elastomers

Paolo Tanasi et al.

POLYMER (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Fabrication and modeling of dielectric elastomer soft actuator with 3D printed thermoplastic frame

Fanghao Zhou et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Digital Printing of Solid-State Lithium-Ion Batteries

L. Jay Deiner et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Additive manufacturing of polymer composites: Processing and modeling approaches

A. El Moumen et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Review Automation & Control Systems

Recent advancements in additive manufacturing technologies for porous material applications

Subhash Guddati et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

3D-printed self-healing composite polymer reinforced with carbon nanotubes

R. Calderon-Villajos et al.

MATERIALS LETTERS (2019)

Add to Collection

Review Instruments & Instrumentation

Soft robots based on dielectric elastomer actuators: a review

Ujjaval Gupta et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Miniature Pneumatic Actuators for Soft Robots by High-Resolution Multimaterial 3D Printing

Yuan-Fang Zhang et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

3D Printing of Magnetoresponsive Polymeric Materials with Tunable Mechanical and Magnetic Properties by Digital Light Processing

Simone Lantean et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots

Yin Cheng et al.

ACS NANO (2019)

Add to Collection

Article Instruments & Instrumentation

Dielectric elastomer materials for large-strain actuation and energy harvesting: a comparison between styrenic rubber, natural rubber and acrylic elastomer

Yi Chen et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

3D-Printed Graphene/Polydimethylsiloxane Composites for Stretchable and Strain-Insensitive Temperature Sensors

Zhenyu Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Dimensional Accuracy and Mechanical Properties of Chopped Carbon Reinforced Polymers Produced by Material Extrusion Additive Manufacturing

Evren Yasa et al.

MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fast-Response, Stiffness-Tunable Soft Actuator by Hybrid Multimaterial 3D Printing

Yuan-Fang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Energy & Fuels

Advanced materials and technologies for hybrid supercapacitors for energy storage - A review

Ahmed Afir et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Review Chemistry, Physical

A review of electrospun nanofiber-based separators for rechargeable lithium-ion batteries

Yifu Li et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Multidisciplinary Sciences

Stereolithographic 3D printing of extrinsically self-healing composites

Polly Sanders et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Wearable Vapor/Liquid Amphibious Methanol Sensor

Yu Jiang et al.

ACS SENSORS (2019)

Add to Collection

Article Chemistry, Physical

Hydrogels from natural egg white with extraordinary stretchability, direct-writing 3D printability and self-healing for fabrication of electronic sensors and actuators

Qiang Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Hierarchical chemomechanical encoding of multi-responsive hydrogel actuators via 3D printing

Jeremy Odent et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Bio-inspired liquid crystal actuator materials

Yuanyuan Shang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Geosciences, Multidisciplinary

Using Resin-Based 3D Printing to Build Geometrically Accurate Proxies of Porous Sedimentary Rocks

Sergey Ishutov et al.

GROUNDWATER (2018)

Add to Collection

Article Geosciences, Multidisciplinary

Using Resin-Based 3D Printing to Build Geometrically Accurate Proxies of Porous Sedimentary Rocks

Sergey Ishutov et al.

GROUNDWATER (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A Novel Fold-Based Design Approach toward Printable Soft Robotics Using Flexible 3D Printing Materials

Benjamin Wee Keong Ang et al.

ADVANCED MATERIALS TECHNOLOGIES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel

Daehoon Han et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

An Ultralight Graphene Honeycomb Sandwich for Stretchable Light-Emitting Displays

Zhenyu Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printing Electrolytes for Solid-State Batteries

Dennis W. McOwen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Customized Li-Ion Batteries with Thick Electrodes

Teng-Sing Wei et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Engineering, Environmental

A review on corrosion-protective extrinsic self-healing: Comparison of microcapsule-based systems and those based on core-shell vascular networks

Seongpil An et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

3D Printed Surgical Simulation Models as educational tool by maxillofacial surgeons

S. M. Werz et al.

EUROPEAN JOURNAL OF DENTAL EDUCATION (2018)

Add to Collection

Article Chemistry, Physical

3D Printing Quasi-Solid-State Asymmetric Micro-Supercapacitors with Ultrahigh Areal Energy Density

Kai Shen et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A self-healing, adaptive and conductive polymer composite ink for 3D printing of gas sensors

Tongfei Wu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Robotics

Fully Soft 3D-Printed Electroactive Fluidic Valve for Soft Hydraulic Robots

Alex Zatopa et al.

SOFT ROBOTICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Plastic Supramolecular Films: Caking-Inspired Cold Sintering of Plastic Supramolecular Films as Multifunctional Platforms (Adv. Funct. Mater. 36/2018)

Mengqi Xie et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchically Designed Electron Paths in 3D Printed Energy Storage Devices

Seong Hyeon Park et al.

LANGMUIR (2018)

Add to Collection

Article Chemistry, Physical

Polymers with autonomous self-healing ability and remarkable reprocessability under ambient humidity conditions

Chaehoon Kim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

All-printed solid-state substrate-versatile and high-performance micro-supercapacitors for in situ fabricated transferable and wearable energy storage via multi-material 3D printing

Yan Zhang et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Soft Actuators for Small-Scale Robotics

Lindsey Hines et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Automation & Control Systems

Soft Robot Review

Chiwon Lee et al.

INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS (2017)

Add to Collection

Article Polymer Science

Anisotropic mechanical properties of fused deposition modeled parts fabricated by using acrylonitrile butadiene styrene polymer

Maksym Rybachuk et al.

JOURNAL OF POLYMER ENGINEERING (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Fit of interim crowns fabricated using photopolymer-jetting 3D printing

Hang-Nga Mai et al.

JOURNAL OF PROSTHETIC DENTISTRY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

3D printing of highly flexible supercapacitor designed for wearable energy storage

Milad Areir et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)

Add to Collection

Article Environmental Sciences

Fracture network created by 3-D printer and its validation using CT images

Anna Suzuki et al.

WATER RESOURCES RESEARCH (2017)

Add to Collection

Review Biochemical Research Methods

A brief review of extrusion-based tissue scaffold bio-printing

Liqun Ning et al.

BIOTECHNOLOGY JOURNAL (2017)

Add to Collection

Article Materials Science, Biomaterials

Temperature and pH responsive 3D printed scaffolds

Sujan Dutta et al.

JOURNAL OF MATERIALS CHEMISTRY B (2017)

Add to Collection

Article Materials Science, Multidisciplinary

3D printing of highly flexible supercapacitor designed for wearable energy storage

Milad Areir et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Multimaterials 3D Printing for Free Assembly Manufacturing of Magnetic Driving Soft Actuator

Zhongying Ji et al.

ADVANCED MATERIALS INTERFACES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring

Xinhua Yao et al.

MATERIALS & DESIGN (2017)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

The study of typical failure modes and failure mechanism of polymer materials

Huanxiang Xu et al.

2017 2ND INTERNATIONAL SEMINAR ON ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)

Add to Collection

Review Mechanics

A review on additive manufacturing of polymer-fiber composites

Pedram Parandoush et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Manufacturing

Digital light processing 3D printing of conductive complex structures

Quanyi Mu et al.

ADDITIVE MANUFACTURING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing

Carl J. Thrasher et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Property Enhancement Effects of Side-Chain-Type Naphthalene Based Sulfonated Poly(arylene ether ketone) on Nafion Composite Membranes for Direct Methanol Fuel Cells

Baolong Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Ceramics

Short fiber reinforced 3d printed ceramic composite with shear induced alignment

Doruk Erdem Yunus et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Physics, Applied

A large-strain, fast-response, and easy-to-manufacture electrothermal actuator based on laser-reduced graphene oxide

Tian-Yu Zhang et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Article Materials Science, Composites

Characterizing the Mechanical Properties of Fused Deposition Modelling Natural Fiber Recycled Polypropylene Composites

M. Milosevic et al.

JOURNAL OF COMPOSITES SCIENCE (2017)

Add to Collection

Article Engineering, Multidisciplinary

Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers

Rafael Thiago Luiz Ferreira et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrastretchable and Self-Healing Double-Network Hydrogel for 3D Printing and Strain Sensor

Sijun Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of 3D-Printed Microvascular Network Design on the Self-Healing Behavior of Cross-Linked Polymers

G. Postiglione et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing

Dinesh K. Patel et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Engineering, Mechanical

Modeling rock specimens through 3D printing: Tentative experiments and prospects

Quan Jiang et al.

ACTA MECHANICA SINICA (2016)

Add to Collection

Article Chemistry, Multidisciplinary

An All-Elastomeric Transparent and Stretchable Temperature Sensor for Body-Attachable Wearable Electronics

Tran Quang Trung et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink

Jung Hyun Kim et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Nanotube Fibers for Wearable Devices and Smart Textiles

Jiangtao Di et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Biochemical Research Methods

3D printed auto-mixing chip enables rapid smartphone diagnosis of anemia

Kimberly Plevniak et al.

BIOMICROFLUIDICS (2016)

Add to Collection

Article Geosciences, Multidisciplinary

Effects of changes in rock microstructures on permeability: 3-D printing investigation

D. Head et al.

GEOPHYSICAL RESEARCH LETTERS (2016)

Add to Collection

Article Polymer Science

Progress towards self-healing polymers for composite structural applications

Margaret Scheiner et al.

POLYMER (2016)

Add to Collection

Review Polymer Science

The Potential of Microencapsulated Self-healing Materials for Microcracks Recovery in Self-healing Composite Systems: A Review

Hafeez Ullah et al.

POLYMER REVIEWS (2016)

Add to Collection

Review Biology

Electroactive polymers for sensing

Tiesheng Wang et al.

INTERFACE FOCUS (2016)

Add to Collection

Article Robotics

High-Force Soft Printable Pneumatics for Soft Robotic Applications

Hong Kai Yap et al.

SOFT ROBOTICS (2016)

Add to Collection

Review Food Science & Technology

Microencapsulation of Oils: A Comprehensive Review of Benefits, Techniques, and Applications

Amr M. Bakry et al.

COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY (2016)

Add to Collection

Article Engineering, Multidisciplinary

Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling

Fuda Ning et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Polymer Science

4D Printing with Mechanically Robust, Thermally Actuating Hydrogels

Shannon E. Bakarich et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2015)

Add to Collection

Article Mechanics

Actuator design and automated manufacturing process for DEAP-based multilayer stack-actuators

Juergen Maas et al.

MECCANICA (2015)

Add to Collection

Article Polymer Science

Autonomic healing of PMMA via microencapsulated solvent

Asha-Dee N. Celestine et al.

POLYMER (2015)

Add to Collection

Article Engineering, Mechanical

Mechanical and thermal properties of photopolymer/CB (carbon black) nanocomposite for rapid prototyping

Shih-Hsuan Chiu et al.

RAPID PROTOTYPING JOURNAL (2015)

Add to Collection

Article Soil Science

From Real Soils to 3D-Printed Soils: Reproduction of Complex Pore Network at the Real Size in a Silty-Loam Soil

N. Dal Ferro et al.

SOIL SCIENCE SOCIETY OF AMERICA JOURNAL (2015)

Add to Collection

Article Environmental Sciences

Three-Dimensional Printing of Macropore Networks of an Undisturbed Soil Sample

Matthias Bacher et al.

VADOSE ZONE JOURNAL (2015)

Add to Collection

Article Multidisciplinary Sciences

Multimaterial magnetically assisted 3D printing of composite materials

Dimitri Kokkinis et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Geochemistry & Geophysics

3D printing sandstone porosity models

Sergey Ishutov et al.

INTERPRETATION-A JOURNAL OF SUBSURFACE CHARACTERIZATION (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Fused deposition modeling with polypropylene

O. S. Carneiro et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Engineering, Geological

A Preliminary Study of 3D Printing on Rock Mechanics

Chao Jiang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Add to Collection

Article Engineering, Multidisciplinary

Development of a self-healing soft pneumatic actuator: a first concept

Seppe Terryn et al.

BIOINSPIRATION & BIOMIMETICS (2015)

Add to Collection

Article Engineering, Multidisciplinary

3D printing antagonistic systems of artificial muscle using projection stereolithography

Bryan N. Peele et al.

BIOINSPIRATION & BIOMIMETICS (2015)

Add to Collection

Article Engineering, Biomedical

Vascularization in Bone Tissue Engineering Constructs

Angel E. Mercado-Pagan et al.

ANNALS OF BIOMEDICAL ENGINEERING (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers

Joseph T. Muth et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

A novel quasicrystal-resin composite for stereolithography

Adnene Sakly et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Multidisciplinary Sciences

Restoration of Large Damage Volumes in Polymers

S. R. White et al.

SCIENCE (2014)

Add to Collection

Article Polymer Science

Mechanoresponsive Healable Metallosupramolecular Polymers

Guangning Hong et al.

MACROMOLECULES (2013)

Add to Collection

Article Polymer Science

Bio-Based Furan Polymers with Self-Healing Ability

Chao Zeng et al.

MACROMOLECULES (2013)

Add to Collection

Article Chemistry, Physical

A multi-walled carbon nanotube/polymer actuator that surpasses the performance of a single-walled carbon nanotube/polymer actuator

Naohiro Terasawa et al.

CARBON (2012)

Add to Collection

Editorial Material Electrochemistry

Polymer electrolytes: Present, past and future

Vito Di Noto et al.

ELECTROCHIMICA ACTA (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling

M. Nikzad et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Characterization & Testing

Processing of a Polyamide-12/carbon nanofibre composite by laser sintering

R. D. Goodridge et al.

POLYMER TESTING (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Room-Temperature Healing of a Thermosetting Polymer Using the Diels-Alder Reaction

Amy M. Peterson et al.

ACS APPLIED MATERIALS & INTERFACES (2010)

Add to Collection

Article Materials Science, Multidisciplinary

THEORY OF DIELECTRIC ELASTOMERS

Zhigang Suo

ACTA MECHANICA SOLIDA SINICA (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Electrothermal Polymer Nanocomposite Actuators

Aaron T. Sellinger et al.

ADVANCED MATERIALS (2010)

Add to Collection

Review Materials Science, Multidisciplinary

Self-Healing Polymers and Composites

B. J. Blaiszik et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)

Add to Collection

Article Chemistry, Physical

Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials

Jolke Perelaer et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Add to Collection

Review Materials Science, Multidisciplinary

Composites by rapid prototyping technology

S. Kumar et al.

MATERIALS & DESIGN (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Reversibly Cross-Linked Polymer Gels as Healing Agents for Epoxy-Amine Thermosets

Amy M. Peterson et al.

ACS APPLIED MATERIALS & INTERFACES (2009)

Add to Collection

Article Materials Science, Composites

Healing behavior of a matrix crack on a carbon fiber/mendomer composite

Jong Se Park et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

Add to Collection

Article Engineering, Industrial

Representation of surface roughness in fused deposition modeling

Daekeon Ahn et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Versatile One-Pot Synthesis of Supramolecular Plastics and Self-Healing Rubbers

Damien Montarnal et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

Article Multidisciplinary Sciences

Self-Repairing Oxetane-Substituted Chitosan Polyurethane Networks

Biswajit Ghosh et al.

SCIENCE (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Acrylic nanocomposite resins for use in stereolithography and structural light modulation based rapid prototyping and rapid manufacturing technologies

Matthias Gurr et al.

ADVANCED FUNCTIONAL MATERIALS (2008)

Add to Collection

Article Materials Science, Composites

Towards Development of a Self-Healing Composite using a Mendable Polymer and Resistive Heating

Jong Se Park et al.

JOURNAL OF COMPOSITE MATERIALS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Self-healing fiber-reinforced polymer composites

Ian P. Bond et al.

MRS BULLETIN (2008)

Add to Collection

Article Polymer Science

Synthesis and characterization of a single-component thermally remendable polymer network: Staudinger and Stille revisited

Erin B. Murphy et al.

MACROMOLECULES (2008)

Add to Collection

Article Multidisciplinary Sciences

Self-healing and thermoreversible rubber from supramolecular assembly

Philippe Cordier et al.

NATURE (2008)

Add to Collection

Article Polymer Science

Solvent-promoted self-healing epoxy materials

Mary M. Caruso et al.

MACROMOLECULES (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Quantitative evaluation of fracture, healing and re-healing of a reversibly cross-linked polymer

Thomas A. Plaisted et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Chemistry, Multidisciplinary

A self-healing poly(dimethyl siloxane) elastomer

Michael W. Keller et al.

ADVANCED FUNCTIONAL MATERIALS (2007)

Add to Collection

Article Chemistry, Physical

Self-healing materials with microvascular networks

Kathleen S. Toohey et al.

NATURE MATERIALS (2007)

Add to Collection

Article Engineering, Manufacturing

A self-healing carbon fibre reinforced polymer for aerospace applications

G. Williams et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Add to Collection

Review Chemistry, Applied

Self-healing coatings for steel

A Kumar et al.

PROGRESS IN ORGANIC COATINGS (2006)

Add to Collection

Article Materials Science, Composites

Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite - Part II: In situ self-healing

EN Brown et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Development of new metal/polymer materials for rapid tooling using Fused deposition modelling

SH Masood et al.

MATERIALS & DESIGN (2004)

Add to Collection

Article Polymer Science

New thermally remendable highly cross-linked polymeric materials

XX Chen et al.

MACROMOLECULES (2003)

Add to Collection

Article Engineering, Manufacturing

Self-healing structural composite materials

MR Kessler et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture testing of a self-healing polymer composite

EN Brown et al.

EXPERIMENTAL MECHANICS (2002)

Add to Collection

Article Multidisciplinary Sciences

A thermally re-mendable cross-linked polymeric material

XX Chen et al.

SCIENCE (2002)

Add to Collection

Article Materials Science, Ceramics

Ink-jet printing of wax-based alumina suspensions

KAM Seerden et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)

Add to Collection

Article Multidisciplinary Sciences

Autonomic healing of polymer composites

SR White et al.

NATURE (2001)

Add to Collection

Article Engineering, Manufacturing

Self-activated healing of delamination damage in woven composites

MR Kessler et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.