☆ 4.7 Article

Field-of-View-Enlarged Single-Camera 3-D Shape Reconstruction

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

Related references

Note: Only part of the references are listed.

Article Computer Science, Artificial Intelligence

High quality 3D reconstruction based on fusion of polarization imaging and binocular stereo vision

Xin Tian et al.

Summary: A novel 3D reconstruction method combining polarization imaging and binocular stereo vision has been proposed, which aims to improve accuracy by correcting azimuth angle errors and utilizing low-rank matrix factorization constraints. Experimental results demonstrate the efficiency of the method and its wide application prospects in 3D reconstruction.

INFORMATION FUSION (2022)

Add to Collection

Article Optics

3D Surface reconstruction of transparent objects using laser scanning with LTFtF method

Kejing He et al.

Summary: A scheme combining stereo matching and laser scanning is proposed for reconstructing the 3D surfaces of transparent objects in this paper. The method utilizes a laser tracking frame to distinguish the laser reflected by the front surface and reconstructs the laser lines from the front surface of the target using stereo vision. Improved matching accuracy and point cloud density are achieved through an internal pixel matching method.

OPTICS AND LASERS IN ENGINEERING (2022)

Add to Collection

Article Optics

Calibrating large-FOV stereo digital image correlation system using phase targets and epipolar geometry

Bin Chen et al.

Summary: The proposed method calibrates the intrinsic parameters of each camera using phase targets and computes scale-free extrinsic parameters from DIC registration, providing a viable solution for large-scale 3D deformation measurement tasks.

OPTICS AND LASERS IN ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Active stereo vision three-dimensional reconstruction by RGB dot pattern projection and ray intersection

YongCan Shuang et al.

Summary: This paper proposes a new stereo vision matching method and pattern extraction method, which can reconstruct the 3D shape of objects more robustly compared to existing methods. The proposed approach also shows robust reconstruction of dynamic shape movements.

MEASUREMENT (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Monocular Depth Estimation Using Laplacian Pyramid-Based Depth Residuals

Minsoo Song et al.

Summary: A new method for monocular depth estimation is proposed in this paper, which effectively utilizes the Laplacian pyramid in the decoder architecture to improve depth estimation accuracy. Additionally, adjusting weight standardization in convolution blocks can improve gradient flow and make optimization smoother.

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS FOR VIDEO TECHNOLOGY (2021)

Add to Collection

Article Geochemistry & Geophysics

Single Scanner BLS System for Forest Plot Mapping

Jie Shao et al.

Summary: The paper introduces a backpack-based MLS system for forest plot mapping, utilizing line and point features to calculate transformation, and proposing a scan-to-map matching strategy for correcting positional drift. The experimental results show that the proposed method achieves accurate forest plot mapping and lower mapping errors compared to existing methods.

IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A Mobile Robotic Measurement System for Large-scale Complex Components Based on Optical Scanning and Visual Tracking

Jinshan Wang et al.

Summary: This paper introduces an integrated mobile robotic measurement system for accurate and automatic 3D measurement of large-scale components with complex curved surfaces. The system consists of a mobile manipulator, a fringe projection scanner and a stereo vision system, providing accurate noncontact 3D measurements of large-scale complex components.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Variant center-symmetric census transform for real-time stereo vision architecture on chip

Chenyuan Zhao et al.

Summary: This paper proposes an improved CT-based semi-global stereo matching algorithm based on FPGA, aiming to increase matching accuracy while meeting real-time constraints. The algorithm divides pixels into two parts and uses two methods to generate bit-vector features, proposing a four-path semi-global matching algorithm in the cost aggregation stage. Finally, left-right check, mismatch point filling, and median filtering are used to enhance the final disparity map.

JOURNAL OF REAL-TIME IMAGE PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Structural vibration measurement with multiple synchronous cameras

Roberto Del Sal et al.

Summary: This study presents a simulation and experimental investigation on measuring the flexural deflection shape of a beam using multiple synchronous cameras. The results show that the accuracy of the measurements significantly improves with an increasing number of cameras and large opening angles between the cameras.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Chemistry, Analytical

Development of a Wide Area 3D Scanning System with a Rotating Line Laser

Jaeho Lee et al.

Summary: A 3D scanning system was developed with a rotating line laser and wide-angle camera for large-area reconstruction. The study proposed a calibration method to estimate the geometrical relationship between the line laser's rotation axis and the camera, resulting in a higher precision and better scanning quality compared to a commercial depth camera for plane reconstruction.

SENSORS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Depth Measurement Based on Stereo Vision With Integrated Camera Rotation

Huei-Yung Lin et al.

Summary: This article introduces a new sensor system design for depth recovery based on rotational stereo configuration built upon a single imaging device. The experiments have demonstrated the feasibility of the proposed depth measurement approach.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Add to Collection

Article Computer Science, Hardware & Architecture

Quality Estimation and Optimization of Adaptive Stereo Matching Algorithms for Smart Vehicles

Fupeng Chen et al.

ACM TRANSACTIONS ON EMBEDDED COMPUTING SYSTEMS (2020)

Add to Collection

Article Chemistry, Analytical

Improving Census Transform by High-Pass with Haar Wavelet Transform and Edge Detection

Jiun-Jian Liaw et al.

SENSORS (2020)

Add to Collection

Article Engineering, Mechanical

Non-contact vibration monitoring of rotating wind turbines using a semi-autonomous UAV

Ashim Khadka et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Optics

Compact three-dimensional computational imaging using a dynamic virtual camera

Anhu Li et al.

OPTICS LETTERS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Indoor Multi-Camera-Based Testbed for 3-D Tracking and Control of UAVs

Heng Deng et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Binocular Light-Field: Imaging Theory and Occlusion-Robust Depth Perception Application

Fei Liu et al.

IEEE TRANSACTIONS ON IMAGE PROCESSING (2020)

Add to Collection

Article Automation & Control Systems

Vision-Based Modal Analysis Using Multiple Vibration Distribution Synthesis to Inspect Large-Scale Structures

Tadayoshi Aoyama et al.

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Engineering, Multidisciplinary

Mirror-assisted panoramic-digital image correlation for full-surface 360-deg deformation measurement

Bin Chen et al.

MEASUREMENT (2019)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel Stereo Vision Measurement System Using Both Line Scan Camera and Frame Camera

Zhen Liu et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2019)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

Unbounded Sparse Census Transform using Genetic Algorithm

Carl Ahlberg et al.

2019 IEEE WINTER CONFERENCE ON APPLICATIONS OF COMPUTER VISION (WACV) (2019)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Learning View Priors for Single-view 3D Reconstruction

Hiroharu Kato et al.

2019 IEEE/CVF CONFERENCE ON COMPUTER VISION AND PATTERN RECOGNITION (CVPR 2019) (2019)

Add to Collection

Review Engineering, Multidisciplinary

Review of single-camera stereo-digital image correlation techniques for full-field 3D shape and deformation measurement

Pan Bing et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Color Stereo-Digital Image Correlation Method Using a Single 3CCD Color Camera

L. Yu et al.

EXPERIMENTAL MECHANICS (2017)

Add to Collection

Article Optics

Full-frame, high-speed 3D shape and deformation measurements using stereo-digital image correlation and a single color high-speed camera

Liping Yu et al.

OPTICS AND LASERS IN ENGINEERING (2017)

Add to Collection

Article Chemistry, Analytical

Monocular Stereo Measurement Using High-Speed Catadioptric Tracking

Shaopeng Hu et al.

SENSORS (2017)

Add to Collection

Article Robotics

1ms Auto Pan-Tilt - video shooting technology for objects in motion based on Saccade Mirror with background subtraction

Kohei Okumura et al.

ADVANCED ROBOTICS (2015)

Add to Collection

Article Optics

Three-dimensional imaging and visualization using off-axially distributed image sensing

Yongri Piao et al.

OPTICS LETTERS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.