Related references
Note: Only part of the references are listed.State-of-the-art review of geotechnical-driven artificial intelligence techniques in underground soil-structure interaction
S. C. Jong et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)
Strength and Microstructural Assessment of Reconstituted and Stabilised Soft Soils with Varying Silt Contents
Yaxu Liu et al.
GEOSCIENCES (2021)
Influence of Degree of Saturation (DOS) on Dynamic Behavior of Unbound Granular Materials
Junyu Sun et al.
GEOSCIENCES (2021)
Strength evaluation of marine clay stabilized by cementitious binder
Kai Yao et al.
MARINE GEORESOURCES & GEOTECHNOLOGY (2020)
Mechanical Behaviour of Atrazine-Contaminated Clay
Mahdi Keramatikerman et al.
APPLIED SCIENCES-BASEL (2020)
Modelling liner forces response to very close-proximity tunnelling in soft alluvial deposits
Wen-Chieh Cheng et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)
Effect of interparticle behavior on the development of soil arching in soil-structure interaction
M. Peerun et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)
EFFECT OF CEMENT AND BENTONITE MIXTURE ON THE CONSOLIDATION BEHAVIOR OF SOFT ESTUARINE SOILS
Zhuang Liu et al.
INTERNATIONAL JOURNAL OF GEOMATE (2020)
Data-Driven Field Observational Method of a Contiguous Bored Pile Wall System Affected by Accidental Groundwater Drawdown
Elizabeth Eu-Mee Chong et al.
GEOSCIENCES (2020)
Static load tests of driven concrete piles under CFRP confinement
Jialin Zhou et al.
GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2020)
A feasible scale-up production of Sporosarcina pasteurii using custom-built stirred tank reactor for in-situ soil biocementation
Armstrong I. Omoregie et al.
BIOCATALYSIS AND AGRICULTURAL BIOTECHNOLOGY (2020)
The use of tunnelling parameters and spoil characteristics to assess soil types: a case study from alluvial deposits at a pipejacking project site
Wen-Chieh Cheng et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)
Lab-scale atmospheric CO2 absorption for calcium carbonate precipitation in sand
Lock-Hei Ngu et al.
GREENHOUSE GASES-SCIENCE AND TECHNOLOGY (2019)
Open-source support toward validating and falsifying discrete mechanics models using synthetic granular materials-Part I: Experimental tests with particles manufactured by a 3D printer
Ritesh Gupta et al.
ACTA GEOTECHNICA (2019)
Interpretation of Geomaterial Behavior during Shearing Aided by PIV Technology
M. I. Peerun et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
A method to estimate the jacking force for pipe jacking in sandy soils
Xinbo Ji et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)
Biocementation of sand by Sporosarcina pasteurii strain and technical-grade cementation reagents through surface percolation treatment method
Armstrong I. Omoregie et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Assessing ureolytic bacteria with calcifying abilities isolated from limestone caves for biocalcification
A. I. Omoregie et al.
LETTERS IN APPLIED MICROBIOLOGY (2019)
Low-cost cultivation of Sporosarcina pasteurii strain in food-grade yeast extract medium for microbially induced carbonate precipitation (MICP) application
Armstrong Ighodalo Omoregie et al.
BIOCATALYSIS AND AGRICULTURAL BIOTECHNOLOGY (2019)
Effects of Significant Variables on Compressive Strength of Soil-Fly Ash Geopolymer: Variable Analytical Approach Based on Neural Networks and Genetic Programming
Hsiao Yun Leong et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)
Strength Development of Soil-Fly Ash Geopolymer: Assessment of Soil, Fly Ash, Alkali Activators, and Water
Hsiao Yun Leong et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)
Effects of relative roughness and mean particle size on the shear strength of sand-steel interface
Li-Jun Su et al.
MEASUREMENT (2018)
Assessment of non-linear rock strength parameters for the estimation of pipe jacking forces. Part 1. Direct shear testing and backanalysis
D. E. L. Ong et al.
ENGINEERING GEOLOGY (2018)
Performance of Field and Numerical Back-Analysis of Floating Stone Columns in Soft Clay Considering the Influence of Dilatancy
D. E. L. Ong et al.
INTERNATIONAL JOURNAL OF GEOMECHANICS (2018)
A Bayesian definition of 'most probable' parameters
Yingyan Jin et al.
GEOTECHNICAL RESEARCH (2018)
A review of Genetic Programming and Artificial Neural Network applications in pile foundations
Milad Fatehnia et al.
INTERNATIONAL JOURNAL OF GEO-ENGINEERING (2018)
Feasible packing of granular materials in discrete-element modelling of cone-penetration testing
Nurhan Ecemis et al.
GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2018)
Mechanical Consequences of Suffusion on Undrained Behaviour of a Gap-Graded Cohesionless Soil - An Experimental Approach
Amirhassan Mehdizadeh et al.
GEOTECHNICAL TESTING JOURNAL (2017)
Determination of representative strength of deep cement-mixed clay from core strength data
Y. Liu et al.
GEOTECHNIQUE (2017)
Microstructural investigation on mechanical behavior of soil-geosynthetic interface in direct shear test
P. Punetha et al.
GEOTEXTILES AND GEOMEMBRANES (2017)
Experimental Characterizations of Contact Movement in Two-Dimensional Rod Assembly Subjected to Direct Shearing
Q. Yuan et al.
INTERNATIONAL JOURNAL OF GEOMECHANICS (2017)
Experimental optimisation of various cultural conditions on urease activity for isolated Sporosarcina pasteurii strains and evaluation of their biocement potentials
Armstrong Ighodalo Omoregie et al.
ECOLOGICAL ENGINEERING (2017)
Impact of highly weathered geology on pipejacking forces
Chung Siung Choo et al.
GEOTECHNICAL RESEARCH (2017)
An efficient probabilistic back-analysis method for braced excavations using wall deflection data at multiple points
Xiao-Hui Qi et al.
COMPUTERS AND GEOTECHNICS (2017)
The influence of surface roughness form on the strength of sand-structure interfaces
A. Martinez et al.
GEOTECHNIQUE LETTERS (2017)
Determining Material Parameters for Critical State Plasticity Models Based on Multilevel Extended Digital Database
Yang Liu et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2016)
Suitability of Sarawak and Gladstone fly ash to produce geopolymers: A physical, chemical, mechanical, mineralogical and microstructural analysis
Hsiao Yun Leong et al.
CERAMICS INTERNATIONAL (2016)
The effect of different Na2O and K2O ratios of alkali activator on compressive strength of fly ash based-geopolymer
Hsiao Yun Leong et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of particle size of sand and surface asperities of reinforcement on their interface shear behaviour
Prashanth Vangla et al.
GEOTEXTILES AND GEOMEMBRANES (2016)
IDENTIFYING MATERIAL PARAMETERS FOR A MICRO-POLAR PLASTICITY MODEL VIA X-RAY MICRO-COMPUTED TOMOGRAPHIC (CT) IMAGES: LESSONS LEARNED FROM THE CURVE-FITTING EXERCISES
Kun Wang et al.
INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING (2016)
The effect of sandblasting on surface properties for adhesion
Anna Rudawska et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Back-analysis and finite element modeling of jacking forces in weathered rocks
D. E. L. Ong et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)
Effect of roughness on shear behavior of red clay - concrete interface in large-scale direct shear tests
Xiaobin Chen et al.
CANADIAN GEOTECHNICAL JOURNAL (2015)
Evaluation of Pipe-Jacking Forces Based on Direct Shear Testing of Reconstituted Tunneling Rock Spoils
C. S. Choo et al.
JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2015)
Severe Damage of a Pile Group due to Slope Failure
D. E. L. Ong et al.
JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2015)
Strength mobilization of cement-treated dredged clay during the early stages of curing
Gyeongo Kang et al.
SOILS AND FOUNDATIONS (2015)
A genetic programming predictive model for parametric study of factors affecting strength of geopolymers
H. Y. Leong et al.
RSC ADVANCES (2015)
Strength and Deformation of Rockfill Material Based on Large-Scale Triaxial Compression Tests. I: Influences of Density and Pressure
Yang Xiao et al.
JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2014)
Behavior of Fresh and Fouled Railway Ballast Subjected to Direct Shear Testing: Discrete Element Simulation
Buddhima Indraratna et al.
INTERNATIONAL JOURNAL OF GEOMECHANICS (2014)
Effects of surface structure deformation on static friction at fractal interfaces
D. A. H. Hanaor et al.
GEOTECHNIQUE LETTERS (2013)
Large-displacement interface shear between steel and granular media
T. Y. K. Ho et al.
GEOTECHNIQUE (2011)
Interface roughness effect on slow cyclic annular shear of granular materials
Georg Koval et al.
GRANULAR MATTER (2011)
Behavior of rounded granular materials in direct shear: Mechanisms and quantification of fluctuations
Y. R. Li et al.
ENGINEERING GEOLOGY (2010)
A comparative study between the NGI Direct Simple Shear apparatus and the Mikasa Direct Shear apparatus
Hideo Hanzawa et al.
SOILS AND FOUNDATIONS (2007)
Input parameters of discrete element methods
Tang-Tat Ng
JOURNAL OF ENGINEERING MECHANICS (2006)
Observation of shear zone development in ring-shear apparatus with a transparent shear box
Hiroshi Fukuoka et al.
LANDSLIDES (2006)
Evolution of Shear-Zone Structure in Undrained Ring-Shear Tests
Muhammad Wafid Agung et al.
LANDSLIDES (2004)
Shear failure behavior of granular-continuum interfaces
JD Frost et al.
ENGINEERING FRACTURE MECHANICS (2002)
Predicting settlement of shallow foundations using neural networks
MA Shahin et al.
JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2002)
Post-failure mobility of saturated sands in undrained load-controlled ring shear tests
GH Wang et al.
CANADIAN GEOTECHNICAL JOURNAL (2002)
Share Paper
