4.8 Article

Morphological Evolution and Solid-Electrolyte Interphase Formation on LiNi0.6Mn0.2Co0.2O2 Cathodes Using Highly Concentrated Ionic Liquid Electrolytes

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Interphase control for high performance lithium metal batteries using ether aided ionic liquid electrolyte

Urbi Pal et al.

Summary: Future rechargeable Li metal batteries require a rational electrolyte design to improve cycling performance. This study reports an ether-ionic liquid electrolyte with excellent Li metal deposition, high voltage stability, and non-flammability. Experimental results demonstrate high-performance cycling with high coulombic efficiency even at high practical areal capacity.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Electrochemistry

Crack-free single-crystal LiNi0.83Co0.10Mn0.07O2 as cycling/thermal stable cathode materials for high-voltage lithium-ion batteries

Peipei Pang et al.

Summary: By synthesizing crack-free single crystal LiNi0.83Co0.10Mn0.07O2 materials, it is possible to improve the cycling and thermal stability of batteries at high voltages, resulting in better capacity retention and cycling performance.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Synergistic electrolyte additives for enhancing the performance of high-voltage lithium-ion cathodes in half-cells and full-cells

Arefeh Kazzazi et al.

Summary: The research addresses the insufficient stability of the electrolyte towards oxidation in high-voltage lithium-ion cathode materials, and introduces a new combination of electrolyte additives to improve battery performance. The synergistic effect of TTSPi and TFEC additives significantly enhances cycling stability, capacity, and coulombic efficiency in lithium-ion cells with a voltage higher than 4.5 V, which can be further improved with the addition of lithium bis(oxalato)borate.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Hyeon Jeong Lee et al.

Summary: By synergistically pairing hollow-structured LNMO with an ionic liquid electrolyte, stable cycling performance and improved rate capability were achieved, allowing for high energy density and low cost. This comprehensive design strategy provides insights to enhance the electrochemical performance of high-voltage cathode materials.

CHEMISTRY OF MATERIALS (2021)

Review Electrochemistry

Electrochemical Impedance Spectroscopy for All-Solid-State Batteries: Theory, Methods and Future Outlook

Pooja Vadhva et al.

Summary: This review summarizes the current knowledge of electrochemical impedance spectroscopy in the context of solid-state electrolytes and batteries, with an emphasis on experimental and modeling best practices, as well as emerging impedance methods for conventional lithium-ion batteries as a guide for opportunities in the solid-state battery field.

CHEMELECTROCHEM (2021)

Article Energy & Fuels

Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte

Weijiang Xue et al.

Summary: The authors have developed a sulfonamide-based electrolyte that allows for stable cycling of LiNi0.8Co0.1Mn0.1O2 in lithium metal batteries at a cutoff voltage of 4.7 V, achieving a specific capacity >230 mA h g(-1) and an average Coulombic efficiency >99.65% over 100 cycles. The 4.7 V lithium-metal battery can retain >88% capacity for 90 cycles even under harsh testing conditions, advancing practical lithium-metal batteries.

NATURE ENERGY (2021)

Review Chemistry, Applied

Ionic liquids for high performance lithium metal batteries

Kexin Liu et al.

Summary: The pursuit of high energy density has driven the development of high-performance lithium metal batteries, but it also brings about security issues. Ionic liquids have attracted attention for their high ionic conductivity and non-flammability, which are significant for improving lithium metal battery performance. The main strategies for future development of ionic liquid-based electrolytes for high performance lithium metal batteries will focus on molecular design, composition, and polymerization.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

Dual-anion ionic liquid electrolyte enables stable Ni-rich cathodes in lithium-metal batteries

Fanglin Wu et al.

Summary: The use of a dual-anion ionic liquid electrolyte enables high electrochemical performance in lithium-metal batteries, with high initial capacity and outstanding cycling stability.

JOULE (2021)

Article Chemistry, Physical

Understanding the Role of Separator and Electrolyte Compatibility on Lithium Metal Anode Performance Using Ionic Liquid-Based Electrolytes

Meisam Hasanpoor et al.

Summary: This study examines the relationship between electrolyte chemistry and separator properties, as well as their impact on lithium metal cycling behavior. Different separators were characterized in ionic liquid-based electrolytes to understand their interactions and effects on electrolyte transport properties. The research suggests that choosing appropriate separator and electrolyte materials can enhance the stability and durability of lithium metal anodes.

ACS APPLIED ENERGY MATERIALS (2021)

Article Multidisciplinary Sciences

Electrochemical impedance spectroscopy

Shangshang Wang et al.

Summary: This paper introduces the application of electrochemical impedance spectroscopy (EIS), analyzes the error structure and sensitivity of impedance measurements in the reduction of ferricyanide process, and provides guidelines for experimental design. The relevance of accuracy contour plots to wiring and instrumentation selection is highlighted, as well as the importance of the Kramers-Kronig relations to data validation and analysis.

NATURE REVIEWS METHODS PRIMERS (2021)

Article Chemistry, Multidisciplinary

Clarification of Decomposition Pathways in a State-of-the-Art Lithium Ion Battery Electrolyte through 13C-Labeling of Electrolyte Components

Jonas Henschel et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Nanoscience & Nanotechnology

Real-time mass spectrometric characterization of the solid-electrolyte interphase of a lithium-ion battery

Yufan Zhou et al.

NATURE NANOTECHNOLOGY (2020)

Article Nanoscience & Nanotechnology

High-Efficiency Lithium Metal Anode Enabled by a Concentrated/ Fluorinated Ester Electrolyte

Shijian Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Electrochemistry

Modeling and Applications of Electrochemical Impedance Spectroscopy (EIS) for Lithium-ion Batteries

Woosung Choi et al.

JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY (2020)

Article Chemistry, Physical

Reliable liquid electrolytes for lithium metal batteries

Huicong Yang et al.

ENERGY STORAGE MATERIALS (2020)

Article Electrochemistry

Electrochemical Formation in Super-Concentrated Phosphonium Based Ionic Liquid Electrolyte Using Symmetric Li-Metal Coin Cells

Thushan Pathirana et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Review Electrochemistry

Surface and Interfacial Chemistry in the Nickel-Rich Cathode Materials

Junhyeok Kim et al.

BATTERIES & SUPERCAPS (2020)

Article Chemistry, Multidisciplinary

FSI-inspired solvent and full fluorosulfonyl electrolyte for 4 V class lithium-metal batteries

Weijiang Xue et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Spectroscopy

Applications of XPS in the characterization of Battery materials

Vaithiyalingam Shutthanandan et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2019)

Article Chemistry, Physical

An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries

Hongyang Li et al.

CHEMISTRY OF MATERIALS (2019)

Article Chemistry, Physical

Capacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent

Gyeong Won Nam et al.

ACS ENERGY LETTERS (2019)

Article Nanoscience & Nanotechnology

In situ quantification of interphasial chemistry in Li-ion battery

Tongchao Liu et al.

NATURE NANOTECHNOLOGY (2019)

Article Chemistry, Physical

Toward Practical Li Metal Batteries: Importance of Separator Compatibility Using Ionic Liquid Electrolytes

Mojtaba Eftekharnia et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Electrochemistry

XPS-Surface Analysis of SEI Layers on Li-Ion Cathodes: Part II. SEI-Composition and Formation inside Composite Electrodes

Natalia Schulz et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Materials Science, Multidisciplinary

A carbonate-free, sulfone-based electrolyte for high-voltage Li-ion batteries

Judith Alvarado et al.

MATERIALS TODAY (2018)

Article Chemistry, Multidisciplinary

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Xiulin Fan et al.

Article Chemistry, Physical

Structural evolution and capacity degradation mechanism of LiNi0.6Mn0.2Co0.2O2 cathode materials

Yanli Ruan et al.

JOURNAL OF POWER SOURCES (2018)

Article Electrochemistry

Temperature Dependence of Oxygen Release from LiNi0.6Mn0.2Co0.2O2 (NMC622) Cathode Materials for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Review Chemistry, Physical

Li- and Mn-Rich Cathode Materials: Challenges to Commercialization

Jianming Zheng et al.

ADVANCED ENERGY MATERIALS (2017)

Article Electrochemistry

Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Chemistry, Physical

Nickel-Rich and Lithium-Rich Layered Oxide Cathodes: Progress and Perspectives

Arumugam Manthiram et al.

ADVANCED ENERGY MATERIALS (2016)

Article Energy & Fuels

Structural and Electrochemical Properties of Calendered Lithium Manganese Oxide Cathodes

Christiane Schilcher et al.

ENERGY TECHNOLOGY (2016)

Review Chemistry, Multidisciplinary

Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries

Wen Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Review Chemistry, Physical

Future generations of cathode materials: an automotive industry perspective

Dave Andre et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Physical

Challenges and Approaches for High-Voltage Spinel Lithium-Ion Batteries

Jung-Hyun Kim et al.

CHEMPHYSCHEM (2014)

Article Electrochemistry

A Systematic Study of Electrolyte Additives in Li[Ni1/3Mn1/3Co1/3]O2 (NMC)/Graphite Pouch Cells

David Yaohui Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Article Electrochemistry

Fast Charge/Discharge of Li Metal Batteries Using an Ionic Liquid Electrolyte

H. Yoon et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Engineering, Electrical & Electronic

History, Evolution, and Future Status of Energy Storage

M. Stanley Whittingham

PROCEEDINGS OF THE IEEE (2012)

Article Electrochemistry

Preparation and electrochemical characterization of LiNi0.8Co0.2O2 cathode material by a modified sol-gel method

Chongqiang Zhu et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2010)

Review Chemistry, Physical

Ionic liquids as electrolytes for Li-ion batteries-An overview of electrochemical studies

Andrzej Lewandowski et al.

JOURNAL OF POWER SOURCES (2009)

Article Electrochemistry

Thermal decomposition of LiPF6-based electrolytes for lithium-ion batteries

CL Campion et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Electrochemistry

The cathode-electrolyte interface in the Li-ion battery

K Edström et al.

ELECTROCHIMICA ACTA (2004)