☆ 4.8 Article

Inhibition of PbI2-induced defects by doping MABr for high-performance perovskite solar cells

NANOSCALE (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Regulating crystallization dynamics and crystal orientation of methylammonium tin iodide enables high-efficiency lead-free perovskite solar cells

Long Ji et al.

Summary: The addition of ethylammonium bromide (EABr) to the methylammonium tin iodide (MASnI(3)) perovskite precursor solution can regulate the crystallization dynamics, improve film morphology, and enhance efficiency and stability of the perovskite solar cells. The combination of EA(+) and Br- ions in the precursor solution results in a champion power conversion efficiency (PCE) of 9.59% and maintains 93% of initial efficiency after 30 days without encapsulation. This work provides a new strategy for high-efficiency tin-based perovskite solar cells.

NANOSCALE (2022)

Add to Collection

Article Chemistry, Physical

Enhanced efficiency and stability of perovskite solar cell by adding polymer mixture in perovskite photoactive layer

Min Zhong et al.

Summary: The key to commercialization of organic-inorganic lead halide perovskite solar cells is to achieve high photoelectric conversion efficiency and long-term stability. By incorporating a polymer mixture of PVP and PEG into the precursor solution, the PCE of PSCs can be significantly improved with better air stability, attributed to the synergistic effect of the polymer mixture on perovskite structure and ion migration. This work provides an effective additive to enhance both efficiency and stability of PSCs for commercial applications in high humidity environments.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Post-Treating the Precursor Intermediate Film by a Cooling Stage for Fabricating Efficient Formamidinium-Based Perovskite Solar Cells

Di Liu et al.

Summary: By utilizing a cooling stage (CO) post-treatment method, the nucleation velocity of perovskite was effectively reduced, resulting in larger perovskite grains with fewer defects. This optimized the charge transport performance and enhanced the stability of the perovskite solar cells (PSCs), achieving a champion power conversion efficiency (PCE) of 21.51%. Furthermore, the CO treatment was found to be beneficial for improving the film quality of perovskite in large-area preparation, showing potential for commercialized applications of PSCs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of reaction time on the morphology and efficiency of ambient-air-processed CsFAMAPbIBr triple cation-mixed perovskite solar cells

Kyungeun Jung et al.

Summary: In this study, CsFAMAPbIBr perovskites were synthesized in ambient air using a two-step deposition method, and the optimal photovoltaic properties were achieved by controlling the reaction time, providing important insights for the preparation of mixed perovskite solar cells in ambient atmosphere.

MATERIALS LETTERS (2021)

Add to Collection

Article Energy & Fuels

Photovoltaic Recovery of All Printable Mesoporous-Carbon-based Perovskite Solar Cells

Stav Alon et al.

Summary: This study focuses on the two-step deposition of mesoporous-carbon-based perovskite solar cells, investigating the influence of dipping time on photovoltaic parameters and achieving a power conversion efficiency of up to 15%. While stability degradation over time was observed at maximum power point tracking, a complete recovery of the devices in the dark was noticed, attributed to the shrinkage of perovskite's unit cell during the recovery process.

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Physical

Multifunctional Polymer Framework Modified SnO2 Enabling a Photostable α-FAPbI3 Perovskite Solar Cell with Efficiency Exceeding 23%

Zhenghong Xiong et al.

Summary: In this study, PEGDA was introduced into SnO2 dispersion to enhance the photovoltaic performance and stability of pero-SCs. The PEGDA-modified SnO2 acted as an ETL, improving carrier transport and matching energy levels with perovskite. Additionally, PEGDA passivated defects at the perovskite-ETL interface, leading to a high power conversion efficiency and long-term stability.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Mixed-Phase Low-Dimensional Perovskite-Assisted Interfacial Lead Directional Management for Stable Perovskite Solar Cells with Efficiency over 24%

Guozhen Liu et al.

Summary: The study successfully tackled the impact of Pb-based defects on the efficiency and stability of perovskite solar cells by designing a low-dimensional perovskite (LDP) using an amphoteric heterocyclic cation. This approach led to increased efficiency and overall stability of the devices, opening up new possibilities for practical application in the field of perovskite photovoltaic devices through directional management of Pb-based interface defects.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Trap State Passivation by Rational Ligand Molecule Engineering toward Efficient and Stable Perovskite Solar Cells Exceeding 23% Efficiency

Lihua Zhu et al.

Summary: Nonradiative recombination losses caused by trap states at the surface and grain boundaries hinder the enhancement of power conversion efficiency and stability in perovskite solar cells. The introduction of 11MA additive successfully improves crystallinity, reduces trap state density, and inhibits ion migration, leading to simultaneous improvement in efficiency and stability. The device with 11MA additive achieves significantly higher PCE and maintains a high level of efficiency after aging for 3000 hours under ambient conditions.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Removal of residual compositions by powder engineering for high efficiency formamidinium-based perovskite solar cells with operation lifetime over 2000 h

Guoqing Tong et al.

Summary: Using pre-synthesized crystalline perovskite with perfect stoichiometry can control and reduce the density of defects in perovskite solar cells, resulting in an increase in efficiency. Pre-synthesized perovskite precursors showed a significant reduction in unwanted intermediate chemical compositions, leading to higher efficiencies in PSCs. Long-term stability measurements also demonstrated the effectiveness of using pre-synthesized perovskite in improving the performance of PSCs.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

Characterization on Highly Efficient Perovskite Solar Cells Made from One-Step and Two-Step Solution Processes

Tzu-Sen Su et al.

Summary: This study compares the properties of PVSK films made by one-step and two-step methods, revealing their horizontal and vertical non-uniformity, as well as the presence of considerable unreacted species in both films. Despite these differences, both films are able to achieve nearly 20% conversion efficiency, showcasing the potential for further improvement in the future.

SOLAR RRL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of deposition methods on the optical and morphological properties of CH3NH3PbBr3 inverted solar cells

Asya Mhamdi et al.

Summary: Perovskite solar cells have become one of the most exciting solar cell technologies under investigation, with efficiency rapidly increasing to over 25% and generating a surge of interest. Reproducible efficiency can be achieved through deposition methods, with higher performance obtained from a two-step deposition process.

MATERIALS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Vacuum deposited PbI2 film grown at elevated temperatures for improved efficiency of CH3NH3PbI3 based planar perovskite solar cells

Joydip Ghosh et al.

Summary: By depositing PbI2 film at elevated temperatures and converting it into CH3NH3PbI3 perovskite film through a two-step vapor-solution deposition process, high-quality films with high absorption and low radiative recombination were successfully prepared. Devices fabricated using the perovskite film grown with PbI2 film deposited at elevated temperatures showed significant improvements in power conversion efficiency and ambient stability compared to those grown at room temperature. The highly improved performance and stability of the devices made with elevated temperature deposition were investigated in detail.

MATERIALS RESEARCH BULLETIN (2021)

Add to Collection

Article Energy & Fuels

Construction of 1D perovskite nanowires by Urotropin passivation towards efficient and stable perovskite solar cell

Parisa Zardari et al.

Summary: The introduction of a small amount of Urotropin (UTP) successfully constructed self-assembled 1D perovskite nanowires (1D-PNWs), improving the crystallinity and reducing defects in the perovskite film, significantly enhancing the photovoltaic performance of the PSC. This study provides a feasible and effective strategy for fabricating cheap and extra stable perovskite solar cells through the growth of a 1D-PNW network by a self-assembly process.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Chemistry, Physical

Cyclohexylammonium-Based 2D/3D Perovskite Heterojunction with Funnel-Like Energy Band Alignment for Efficient Solar Cells (23.91%)

Seonghwa Jeong et al.

Summary: Insufficient charge extraction at the interfaces between light-absorbing perovskites and charge transporting layers can be addressed by introducing novel 2D layered perovskites, forming a 2D/3D perovskite heterojunction to improve hole extraction efficiency and reduce interface resistance, resulting in higher power conversion efficiency for perovskite solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Ternary Two-Step Sequential Deposition Induced Perovskite Orientational Crystallization for High-Performance Photovoltaic Devices

Chun-Hao Chen et al.

Summary: The two-step sequential deposition method incorporating cesium acetate and formamidinium methylammonium cesium as raw materials can improve the perovskite crystallization process, further enhancing the efficiency and quality of perovskite films.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells

Baibai Liu et al.

Summary: The modification of perovskite films with the multi-active-site Lewis base ligand MTDAA effectively reduces defect density, increases carrier lifetime, and almost completely releases interfacial residual stress. The PCE is boosted after MTDAA modification, and the devices maintain high stability after aging tests.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Grain size control for high-performance formamidinium-based perovskite solar cells via suppressing heterogenous nucleation

Xiaoxiao Xu et al.

Summary: Research focused on modulating the nucleation rate by introducing modifiers into precursor solutions to obtain high-quality perovskite films with large grain size and low-defect density, resulting in improved performance of FAPbI(3)-based PSCs. The modified PSCs achieved a high power-conversion efficiency of 20.15% and maintained about 92% of the initial efficiency in an air atmosphere.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Correlating Hysteresis and Stability with Organic Cation Composition in the Two-Step Solution-Processed Perovskite Solar Cells

Yunkang Cuo et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Energy & Fuels

A Review on Halide Perovskite Film Formation by Sequential Solution Processing for Solar Cell Applications

Jueming Bing et al.

Energy Technology (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Suppressing Defects-Induced Nonradiative Recombination for Efficient Perovskite Solar Cells through Green Antisolvent Engineering

Wenzhan Xu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Interface passivation treatment by halogenated low-dimensional perovskites for high-performance and stable perovskite photovoltaics

Guozhen Liu et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Zwitterionic-Surfactant-Assisted Room-Temperature Coating of Efficient Perovskite Solar Cells

Kuan Liu et al.

JOULE (2020)

Add to Collection

Article Energy & Fuels

Crystallization Control of Methylammonium-Free Perovskite in Two-Step Deposited Printable Triple-Mesoscopic Solar Cells

Jiankang Du et al.

SOLAR RRL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Electrochemical Deposition of CsPbBr3 Perovskite for Photovoltaic Devices with Robust Ambient Stability

Xin Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The Impact of a Dynamic Two-Step Solution Process on Film Formation of Cs0.15(MA0.7FA0.3)0.85PbI3 Perovskite and Solar Cell Performance

Jueming Bing et al.

SMALL (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stable and Efficient FASnI3-Based Perovskite Solar Cells by Introducing Hydrogen Bonding

Xiangyue Meng et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Incorporating CsF into the PbI2 Film for Stable Mixed Cation-Halide Perovskite Solar Cells

Xiaohui Yi et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Importance of Functional Groups in Cross-Linking Methoxysilane Additives for High-Efficiency and Stable Perovskite Solar Cells

Lin Xie et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Review Nanoscience & Nanotechnology

A Review of the Role of Solvents in Formation of High-Quality Solution-Processed Perovskite Films

Xiaobing Cao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Morphological and compositional progress in halide perovskite solar cells

Hui-Seon Kim et al.

CHEMICAL COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Efficient composition tuning via cation exchange and improved reproducibility of photovoltaic performance in FA(x)MA(1-x)PbI(3) planar heterojunction solar cells fabricated by a two-step dynamic spin-coating process

Kyungeun Jung et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

The intrinsic properties of FA(1-x)MAxPbI3 perovskite single crystals

Yuan Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Manipulating Crystallization of Organolead Mixed-Halide Thin Films in Antisolvent Baths for Wide-Bandgap Perovskite Solar Cells

Yuanyuan Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process

Chien-Hung Chiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.