4.6 Article

N-doped engineering of a high-voltage LiNi0.5Mn1.5O4 cathode with superior cycling capability for wide temperature lithium-ion batteries

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Suppressed phase separation in spinel LiNi0.5Mn1.5O4 cathode via interstitial sites modulation

Yi Han et al.

Summary: The strategy of modulating interstitial sites has been confirmed to stabilize spinel LNMO, improving its structural stability and electrochemical performance. By partially occupying the interstitial 16c sites with Ni2+, the migration and dissolution of manganese ions is suppressed, leading to better lithium-ion transfer kinetics and superior capacity retention rates after cycling.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Harnessing the Volume Expansion of MoS3 Anode by Structure Engineering to Achieve High Performance Beyond Lithium-Based Rechargeable Batteries

Mingze Ma et al.

Summary: The 2D heterostructure of amorphous molybdenum sulfide on reduced graphene surface shows low strain and fast reaction kinetics for beyond-lithium-ions storage, leading to excellent cycling performance and electrochemical performance.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Understanding the Role of Alumina (Al2O3), Pentalithium Aluminate (Li5AlO4), and Pentasodium Aluminate (Na5AlO4) Coatings on the Li and Mn-Rich NCM Cathode Material 0.33Li2MnO3•0.67Li(Ni0.4Co0.2Mn0.4)O2 for Enhanced Electrochemical Performance

Sandipan Maiti et al.

Summary: The study discusses the active role of alumina, Li-aluminate, and Na-aluminate as surface protection coatings on Li and Mn-rich NCM cathode materials, showing notable improvements in electrochemical behavior. The coated cathodes demonstrate enhanced cycling and rate performances, with Na-aluminate showing exemplary behavior and significantly higher specific capacities compared to uncoated cathodes, as well as lower evolution of gases and transition metals dissolution.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Electrochemistry

Synthesis, Modification, and Lithium-Storage Properties of Spinel LiNi0.5Mn1.5O4

Junxin Chen et al.

Summary: The article summarizes the latest research progress of LiNi0.5Mn1.5O4 as a cathode material for lithium-ion batteries, discusses its structure, performance, and capacity fading mechanism, and puts forward future development prospects.

CHEMELECTROCHEM (2021)

Article Chemistry, Physical

Cobalt-free, high-nickel layered oxide cathodes for lithium-ion batteries: Progress, challenges, and perspectives

Youngjin Kim et al.

Summary: This article discusses the necessity and key factors for developing cobalt-free high-Ni layered oxides from the perspective of materials science and electrochemistry. Several aspects that need to be considered and the exploration of alternative dopants and substituents are proposed.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Interfacial passivation by room-temperature liquid metal enabling stable 5 V-class lithium-metal batteries in commercial carbonate-based electrolyte

Chuanliang Wei et al.

Summary: Passivating the surface of lithium metal anodes with a liquid metal improves their stability by forming a lithium-based alloy framework. This framework alleviates corrosion, uneven lithium deposition, and unstable interfaces, leading to superior electrochemical performance when paired with high-voltage cathodes. This passivation strategy also holds potential for highly reactive sodium and potassium metal anodes.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Improving electrochemical performance of lithium ion batteries using a binder-free carbon fiber-based LiNi0.5(1-x)Mn1.5(1-x/3)CrxO4 cathode with a conventional electrolyte

Yi-Hung Liu et al.

Summary: A binder-free LiNi0.5(1-x)Mn1.5(1-x/3)CrxO4 (Cr-doped LNMO)/carbon fiber (CF) cathode has been developed with high cycling stability and reversible capacity.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Li+ and Cl- co-doped LiNi0.5Mn1.5O4 cathode material with truncated octahedral shape and enhanced electrochemical performance for Li-ion batteries

Aijia Wei et al.

Summary: The Li+ and Cl-co-doped LNMO electrodes exhibit superior electrochemical performances compared to pure LNMO, thanks to the larger portion of {100} and {110} facets, lower charge-transfer resistance, electrode polarization, and higher Li+ diffusion coefficient.

SOLID STATE IONICS (2021)

Article Chemistry, Multidisciplinary

Lewis Acidity Organoboron-Modified Li-Rich Cathode Materials for High-Performance Lithium-Ion Batteries

Xiangkun Nie et al.

Summary: By modifying LLMO with Lewis acidity material, forming a surface B3+-doped spinel structure, and coating and (BO3)(3-)-doped LLMO, this study has significantly improved the performance of the material, showing excellent cycling and rate capabilities.

ADVANCED MATERIALS INTERFACES (2021)

Article Nanoscience & Nanotechnology

Stabilized Cathode Interphase for Enhancing Electrochemical Performance of LiNi0.5Mn1.5O4-Based Lithium-Ion Battery via cis-1,2,3,6-Tetrahydrophthalic Anhydride

Chunlei Tan et al.

Summary: This study used cis-1,2,3,6-Tetrahydrophthalic anhydride (CTA) as a functional additive in the carbonate baseline electrolyte (BE) to enhance the cyclic stability of LiNi0.5Mn1.5O4-based lithium-ion batteries (LNMO-based LIBs). CTA was oxidized to participate in the construction of a CEI film, introducing unsaturated aromatic group into the CEI film composition, thereby improving the antioxidative activity of the CEI film under the influence of field-effect. The stabilized CEI film significantly suppressed parasitic reactions of electrolytes, decreased the consumption of active-Li+, and protected the LNMO cathode structure, enhancing the cyclic compatibility of LNMO-based LIBs with carbonate electrolytes from 3.5 to 4.9 V.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Dense All-Electrochem-Active Electrodes for All-Solid-State Lithium Batteries

Meiying Li et al.

Summary: The energy density is crucial for lithium-ion batteries, but traditional electrode utilization is unsatisfactory. A dense all-electrochem-active electrode has been proposed to minimize the energy density gap, achieving a high compacted filling rate and energy density.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

5V-class sulfurized spinel cathode stable in sulfide all-solid-state batteries

Yue Wang et al.

Summary: This study introduces a new method of sulfurizing LNMO itself to improve the compatibility between the cathode and sulfide solid electrolyte, ultimately enhancing the performance of all-solid-state batteries with higher initial discharge capacity and better cycling stability.

NANO ENERGY (2021)

Article Chemistry, Physical

Polycrystalline and Single Crystalline NCM Cathode Materials-Quantifying Particle Cracking, Active Surface Area, and Lithium Diffusion

Enrico Trevisanello et al.

Summary: The NCM family of cathode active materials with high nickel content is becoming the preferred choice for high performance lithium-ion batteries. Study shows that cracking of polycrystalline particles of NCM is not only detrimental, but also helps achieve higher reversible capacities and rate capability. Optimization of CAM size and morphology is crucial for achieving good rate capability with high-nickel NCMs.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Modified bornite materials with high electrochemical performance for sodium and lithium storage

Feng Jiang et al.

Summary: Mineral-derived carbon-coated Cu5FeS4 anode material demonstrates outstanding performance in both sodium-ion and lithium-ion batteries, delivering high reversible capacity and superior long-term cycling performance. This work sheds light on potential energy storage applications for naturally abundant mineral-based materials.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Sputtered LiNi0.5Mn1.5O4 Thin Films for Lithium-Ion Microbatteries

Maxime Hallot et al.

Summary: This paper presents a detailed study on the influence of sputtering deposition parameters on the electrochemical properties of electrodes for lithium-ion microbatteries. The research aims to optimize the performance and investigate the relationship between structure and electrochemical properties.

ACS APPLIED ENERGY MATERIALS (2021)

Article Nanoscience & Nanotechnology

Surface Lattice Oxygen Activation by Nitrogen-Doped Manganese Dioxide as an Effective and Longevous Catalyst for Indoor HCHO Decomposition

Jinwei Chen et al.

Summary: The thermodynamic stability of oxygen vacancy in catalytic oxidation of formaldehyde can be improved by nitrogen doping, leading to enhanced catalytic activity and stability of MnO2/C catalyst for HCHO oxidation. The nitrogen-doped MnO2/C catalyst can completely remove around 1 ppm of HCHO within 3 hours and remains highly active even after 5 cycles at room temperature, showing great potential for application in the field of HCHO oxidation.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Reversible Switching of Battery Internal Resistance Using Iongate Separators

Matthew S. Gonzalez et al.

Summary: Battery separators play a critical role in determining the calendar life and safety of batteries. The iongate separator demonstrated in the study allows for reversible changes in ion transport, leading to improved battery performance and reduced capacity loss. Additionally, the iongate battery shows similar cycling performance to normal batteries but can be reversibly shut-off for improved safety.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Crystallographic-Site-Specific Structural Engineering Enables Extraordinary Electrochemical Performance of High-Voltage LiNi0.5Mn1.5O4 Spinel Cathodes for Lithium-Ion Batteries

Gemeng Liang et al.

Summary: By specifically engineering the crystallographic sites of the electrode material, the researchers successfully transformed the detrimental two-phase reaction into a preferential solid-solution reaction, significantly suppressing the loss of Mn and improving the stability of the material during cycling. The modified LNMO material exhibited impressive performance at high rates and demonstrated its potential application prospects.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Unraveling TM Migration Mechanisms in LiNi1/3Mn1/3Co1/3O2 by Modeling and Experimental Studies

Hui Wan et al.

Summary: Electrochemical cycling induces transition-metal ion migration and oxygen vacancy formation in layered transition-metal oxides, causing performance decay. This study used ab initio calculations and atomic level imaging to explore the migration mechanisms in LiNi1/3Mn1/3Co1/3O2, revealing favorable pathways for transition-metal migration and the critical role of nickel in stabilizing layered cathodes. Insights from this study may lead to tailored layered cathodes with high structural stability and superior performance.

NANO LETTERS (2021)

Article Chemistry, Physical

Accelerated Polysulfide Redox in Binder-Free Li2S Cathodes Promises High-Energy-Density Lithium-Sulfur Batteries

Qining Fan et al.

Summary: This study reveals the impact of binders on the deposition of Li2S1-2 on S based cathodes and the interaction between polyvinylidene difluoride and Li2S/polysulfides. Constructing a battery without binders can significantly improve electrode utilization.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Performance of 5V LiNi0.5Mn1.5-xZrxO4 Cathode Material for Lithium-Ion Batteries

Jiajia Gong et al.

Summary: Zr4+ doping improves the structure, morphology, and electrochemical properties of LiNi0.5Mn1.5O4 material. The optimal performance is observed in LiNi0.5Mn1.495Zr0.005O4 sample with appropriate Zr doping.

CHEMISTRYSELECT (2021)

Review Chemistry, Multidisciplinary

Advances in the Cathode Materials for Lithium Rechargeable Batteries

Wontae Lee et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

Understanding Rechargeable Battery Function Using In Operando Neutron Powder Diffraction

Gemeng Liang et al.

ADVANCED MATERIALS (2020)

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Article Chemistry, Multidisciplinary

A Long Cycle-Life High-Voltage Spinel Lithium-Ion Battery Electrode Achieved by Site-Selective Doping

Gemeng Liang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Physical

Molecular and atomic adsorptions of hydrogen, oxygen, and nitrogen on defective carbon nanotubes: A first-principles study

Haipeng Yu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Enhanced cycling stability of high-voltage lithium metal batteries with a trifunctional electrolyte additive

Huiyang Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Multidisciplinary

Investigation of two-dimensional hf-based MXenes as the anode materials for li/na-ion batteries: A DFT study

Zhifang Yang et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2019)

Article Nanoscience & Nanotechnology

One-Step Integrated Surface Modification To Build a Stable Interface on High-Voltage Cathode for Lithium-Ion Batteries

Rui Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Chemistry, Multidisciplinary

Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control

Jiaxin Zheng et al.

ACCOUNTS OF CHEMICAL RESEARCH (2019)

Article Chemistry, Physical

Boron additive passivated carbonate electrolytes for stable cycling of 5 V lithium- metal batteries

Hongyun Yue et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Nanoscience & Nanotechnology

Synthesis and Electrochemical Properties of LiNi0.5Mn1.5O4 for Li-Ion Batteries by the Metal-Organic Framework Method

Chengjie Yin et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Engineering, Environmental

Charge-modulated CO2 capture of C3N nanosheet: Insights from DFT calculations

Xiaofang Li et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Multidisciplinary

Lithium Nitrate Solvation Chemistry in Carbonate Electrolyte Sustains High-Voltage Lithium Metal Batteries

Chong Yan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Multidisciplinary

Sulfur-Nitrogen Codoped Graphite Slit-Pore for Enhancing Selective Carbon Dioxide Adsorption: Insights from Molecular Simulations

Xiaofang Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Review Chemistry, Multidisciplinary

Rational material design for ultrafast rechargeable lithium-ion batteries

Yuxin Tang et al.

CHEMICAL SOCIETY REVIEWS (2015)

Article Multidisciplinary Sciences

Visualizing nanoscale 3D compositional fluctuation of lithium in advanced lithium-ion battery cathodes

A. Devaraj et al.

NATURE COMMUNICATIONS (2015)

Article Multidisciplinary Sciences

High rate and stable cycling of lithium metal anode

Jiangfeng Qian et al.

NATURE COMMUNICATIONS (2015)

Article Nanoscience & Nanotechnology

An Organic Coprecipitation Route to Synthesize High Voltage LiNi0.5Mn1.5O4

Jijun Feng et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Chemistry, Physical

Octahedral and truncated high-voltage spinel cathodes: the role of morphology and surface planes in electrochemical properties

Katharine R. Chemelewski et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Article Chemistry, Physical

Calculations of Oxygen Stability in Lithium-Rich Layered Cathodes

Penghao Xiao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)