☆ 4.6 Article

Novel membranes with extremely high permeability fabricated by 3D printing and nickel coating for oil/water separation

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

A novel in-situ micro-aeration functional membrane with excellent decoloration efficiency and antifouling performance

Ying Liu et al.

Summary: In this study, a PVDF-Ni-Co membrane was fabricated using an in-situ reduction method, showing excellent conductivity, magnetism, and in-situ micro-aeration function. The membrane exhibited outstanding decoloration efficiency to RB, CR, and MB solutions, with a rejection rate of 98.33% to CR solution. Additionally, in-situ micro-aeration was confirmed to be critical in enhancing membrane antifouling performance.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Preparation of Ni@UiO-66 incorporated polyethersulfone (PES) membrane by magnetic field assisted strategy to improve permeability and photocatalytic self-cleaning ability

Jiahao Liu et al.

Summary: In this study, a PES-Ni@UiO-66 membrane was prepared by coating UiO-66 with magnetic Ni and incorporating it into the PES membrane matrix. The distribution of magnetic Ni@UiO-66 was controlled by an external magnetic field, and the hydrophilic Ni@UiO-66 was pulled onto the membrane surface, resulting in a membrane with higher hydrophilicity and superior water permeability. Moreover, the membrane exhibited excellent photocatalytic self-cleaning ability and antifouling performance due to the photocatalytic activity of the exposed Ni@UiO-66 on the membrane surface.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Facile preparation of recyclable magnetic Ni@filter paper composite materials for efficient photocatalytic degradation of methyl orange

Qianqian Zeng et al.

Summary: A low-cost catalyst was developed by loading magnetic Ni onto filter paper, addressing the difficulty in recycling of photocatalysts. The Ni@FP material showed strong magnetic ability and significant photocatalytic degradation efficiency, with good stability and recyclability, promising a wide range of applications in dyeing wastewater treatment.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

3D printing for membrane desalination: Challenges and future prospects

Allan Soo et al.

Summary: In recent years, there has been a growing interest in the application of 3D printing in water treatment and desalination. However, current limitations faced by 3D printing technologies in this field include resolution, build volume, production rates, appropriate materials, among others. Future directions should be based on current trends in membrane research and 3D printing technologies to overcome these barriers.

DESALINATION (2021)

Add to Collection

Article Engineering, Chemical

Facile synthesis of 2D TiO2@MXene composite membrane with enhanced separation and antifouling performance

Zhengyi Huang et al.

Summary: The study introduces a novel PES-TiO2@MXene composite membrane with superior separation performance and antifouling properties, especially under UV irradiation for self-cleaning. The composite membrane demonstrates excellent flux and rejection rate, along with significantly reducing attractive interactions with foulants. The facile fabrication method and efficient membrane performance indicate promising application prospects for the proposed PES-TiO2@MXene composite membrane.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Inkjet printing of dopamine followed by UV light irradiation to modify mussel-inspired PVDF membrane for efficient oil-water separation

Renjie Li et al.

Summary: The study proposed a method using inkjet printing and UV irradiation to modify mussel-inspired polyvinylidene fluoride membrane, demonstrating improved oil-water separation performance and stability under different pH values.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Flame-retardant ethylene vinyl acetate composite materials by combining additions of aluminum hydroxide and melamine cyanurate: Preparation and characteristic evaluations

Siyi Xu et al.

Summary: This study proposed a strategy to combine aluminum hydroxide and melamine cyanurate with ethylene vinyl acetate to prepare EVA composite materials with high flame resistance. The addition of melamine cyanurate improved the thermal stability and flame resistance of EVA, with the optimal EVA-60-40 composition displaying the best fire resistance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Modelling the critical roles of zeta potential and contact angle on colloidal fouling with a coupled XDLVO - collision attachment approach

Junxia Liu et al.

Summary: The model predicts that severe fouling occurs at low ζ(2) values, and increasing ζ(2) can significantly reduce the membrane fouling rate. The role of contact angle θ is critical, as fouling is dramatically reduced when θ is below (or above) a certain threshold value.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Active antifouling carbon cloth@Ni-Co LDH/Ag membrane for efficient oil/water separation

Atian Xie et al.

Summary: A new active antifouling carbon cloth@Ni-Co LDH/Ag (CC@LDH/Ag) membrane with excellent self-cleaning ability and high separation efficiency for different kinds of oil/water mixtures has been reported. The membrane is superhydrophilic/underwater superoleophobic, and exhibits high flux and environmental/mechanical durability. With good self-cleaning ability, the CC@LDH/Ag membrane shows promising application prospects in oily wastewater remediation.

APPLIED CLAY SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Solvent based Slurry Stereolithography 3D printed hydrophilic ceramic membrane for ultrafiltration application

Saikat Sinha Ray et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Engineering, Chemical

Membrane fouling by emulsified oil: A review

Emily Tummons et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

3D printed composite membranes with enhanced anti-fouling behaviour

Abouther Al-Shimmery et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

A conductive PVDF-Ni membrane with superior rejection, permeance and antifouling ability via electric assisted in-situ aeration for dye separation

Weiming Yu et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Trade-off in membrane distillation with monolithic omniphobic membranes

Wei Wang et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Environmental Sciences

Effects of surface morphology on alginate adhesion: Molecular insights into membrane fouling based on XDLVO and DFT analysis

Renjie Li et al.

CHEMOSPHERE (2019)

Add to Collection

Article Engineering, Chemical

Aerating static mixers prevent fouling

Sarah Armbruster et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Engineering, Chemical

3D printed feed spacers based on triply periodic minimal surfaces for flux enhancement and biofouling mitigation in RO and UF

Nurshaun Sreedhar et al.

DESALINATION (2018)

Add to Collection

Article Engineering, Chemical

3D-printed rotating spinnerets create membranes with a twist

Tobias Luelf et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Review Polymer Science

Polymeric materials with switchable superwettability for controllable oil/water separation: A comprehensive review

Jin-Jin Li et al.

PROGRESS IN POLYMER SCIENCE (2018)

Add to Collection

Article Engineering, Environmental

Removal of oil from oil-water emulsion by hybrid coagulation/sand filter as pre-treatment

Abdullah Almojjly et al.

JOURNAL OF WATER PROCESS ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Super-hydrophobic 3D printed polysulfone membranes with a switchable wettability by self-assembled candle soot for efficient gravity-driven oil/water separation

Shushan Yuan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications

Rouhollah D. Farahani et al.

ADVANCED MATERIALS (2016)

Add to Collection

Review Environmental Sciences

An overview of oil-water separation using gas flotation systems

Jayaprakash Saththasivam et al.

CHEMOSPHERE (2016)

Add to Collection

Article Engineering, Chemical

Alkaline-induced superhydrophilic/underwater superoleophobic polyacrylonitrile membranes with ultralow oil-adhesion for high-efficient oil/water separation

Feng Zhang et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

Add to Collection

Article Engineering, Environmental

Development and characterization of 3D-printed feed spacers for spiral wound membrane systems

Amber Siddiqui et al.

WATER RESEARCH (2016)

Add to Collection

Article Engineering, Environmental

Membrane fouling in a submerged membrane bioreactor: Impacts of floc size

Li-guo Shen et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Engineering, Environmental

A Fenton-like process for the enhanced activated sludge dewatering

Dong-Qin He et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Review Engineering, Chemical

Membrane technology enhancement in oil-water separation. A review

M. Padaki et al.

DESALINATION (2015)

Add to Collection

Article Engineering, Chemical

Print your membrane: Rapid prototyping of complex 3D-PDMS membranes via a sacrificial resist

Tim Femmer et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

A novel carbon nanotubes reinforced superhydrophobic and superoleophilic polyurethane sponge for selective oil-water separation through a chemical fabrication

Huaiyuan Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

An Intelligent Superwetting PVDF Membrane Showing Switchable Transport Performance for Oil/Water Separation

Mimi Tao et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Engineering, Chemical

Surface modification of ABS by photocatalytic treatment for electroless copper plating

Wenxia Zhao et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Engineering, Chemical

Interaction mechanisms and predictions on membrane fouling in an ultrafiltration system, using the XDLVO approach

Tao Lin et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Review Engineering, Chemical

A critical review of extracellular polymeric substances (EPSs) in membrane bioreactors: Characteristics, roles in membrane fouling and control strategies

Hongjun Lin et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrafast Separation of Emulsified Oil/Water Mixtures by Ultrathin Free-Standing Single-Walled Carbon Nanotube Network Films

Zhun Shi et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Nanowire-Haired Inorganic Membranes with Superhydrophilicity and Underwater Ultralow Adhesive Superoleophobicity for High-Efficiency Oil/Water Separation

Feng Zhang et al.

ADVANCED MATERIALS (2013)

Add to Collection

Review Engineering, Chemical

A review on membrane fabrication: Structure, properties and performance relationship

Boor Singh Lalia et al.

DESALINATION (2013)

Add to Collection

Article Engineering, Chemical

Effect of algal extracellular polymer substances on UF membrane fouling

Yu-Ting Chiou et al.

DESALINATION (2010)

Add to Collection

Article Materials Science, Multidisciplinary

An Environment-Friendly Surface Pretreatment of ABS Plastic for Electroless Plating Using Chemical Foaming Agents

Dong Ho Kang et al.

TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

A new palladium-free surface activation process for Ni electroless plating on ABS plastic

Xuejiao Tang et al.

MATERIALS LETTERS (2009)

Add to Collection

Article Materials Science, Coatings & Films

Surface modifications of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) copolymer by treatment with atmospheric plasma

Juana Abenojar et al.

SURFACE & COATINGS TECHNOLOGY (2009)

Add to Collection

Article Engineering, Chemical

Atmospheric pressure plasma treatment of glassy carbon for adhesion improvement

Y. Kusano et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.