Related references
Note: Only part of the references are listed.Synthesis and characterization of water injection fracturing fluid for wetting and softening coal seam
Gang Zhou et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2022)
Electrospun nanofibers for personal protection in mines
Rulin Liu et al.
CHEMICAL ENGINEERING JOURNAL (2021)
CFD simulation of multi-phase and multi-component diffusion of air-dust-gas in a fully mechanized mining face
Shuzheng Song et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)
Comparison of the coal dust suppression performance of surfactants using static test and dynamic test
Zidong Zhao et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Improving coal powder wettability using electrolyte assisted surfactant solution
Ping Chang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)
Experimental synthesis and performance comparison analysis of high-efficiency wetting enhancers for coal seam water injection
Jian Sun et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Synthesis and Characterization of a Multifunctional Sustained-Release Organic-Inorganic Hybrid Microcapsule with Self-Healing and Flame-Retardancy Properties
Wenjing Jiang et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Experimental investigation on combined modification for micro physicochemical characteristics of coal by compound reagents and liquid nitrogen freeze-thaw cycle
Weibo Han et al.
FUEL (2021)
Microwetting dynamic behavior and mechanism for coal dust based on low field NMR method-A case study
Qingtao Zhang et al.
FUEL (2021)
Spray dedusting scheme under hybrid ventilation at a fully mechanized excavation face
Haiming Yu et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)
Experimental analysis of the pore structure and fractal characteristics of different metamorphic coal based on mercury intrusion-nitrogen adsorption porosimetry
Weibo Han et al.
POWDER TECHNOLOGY (2020)
Determination of the optimal axial-to-radial flow ratio of the wall-mounted swirling ventilation in fully mechanized excavation face
Yongjun Li et al.
POWDER TECHNOLOGY (2020)
Dust removal effect of negatively-pressured spraying collector for advancing support in fully mechanized coal mining face: Numerical simulation and engineering application
Gang Zhou et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)
Synthesis and Performance of a Novel High-Efficiency Coal Dust Suppressant Based on Self-Healing Gel
Jianfei Ding et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
CFD investigation on dust dispersion pollution of down/upwind coal cutting and relevant countermeasures for spraying dustfall in fully mechanized mining face
Guobao Zhang et al.
ADVANCED POWDER TECHNOLOGY (2020)
Synthesis and performance characteristics of a new ecofriendly crust-dust suppressant extracted from waste paper for surface mines
Shuailong Li et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Simultaneous evaluation of wind flow and dust emissions from conveyor belts using computational fluid dynamics (CFD) modelling and experimental measurements
Susana Torno et al.
POWDER TECHNOLOGY (2020)
Gas-solid two-phase flow in an underground mine with an optimized air-curtain system: A numerical study
Changgeng Gui et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Preparation and performance characteristics of an environmentally-friendly agglomerant to improve the dry dust removal effect for filter material
Rulin Liu et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Multiphase CFD modeling and laboratory testing of a Vortecone for mining and industrial dust scrubbing applications
Ashish Ranjan Kumar et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Experimental study on atomization characteristics and dust-reduction performance of four common types of pressure nozzles in underground coal mines
Han Han et al.
INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2020)
Molecular dynamics simulation and experimental characterization of anionic surfactant: Influence on wettability of low-rank coal
Zongqi Liu et al.
FUEL (2020)
An experimental research of dynamic characteristics for long wall shearer cutting unit gearbox in oblique cutting
Jue Wang et al.
INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2020)
Numerical simulation of the dimensional transformation of atomization in a supersonic aerodynamic atomization dust-removing nozzle based on transonic speed compressible flow
Tian Zhang et al.
INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2020)
Engine performance and combustion characteristics of a direct injection compression ignition engine fueled waste cooking oil synthetic diesel
Thanh Viet Nguyen et al.
INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2020)
Experimental characterization of multi-nozzle atomization interference for dust reduction between hydraulic supports at a fully mechanized coal mining face
Jiayuan Wang et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)
Effect of air flowrate on pollutant dispersion pattern of coal dust particles at fully mechanized mining face based on numerical simulation
Peng Cai et al.
FUEL (2019)
Development of Venturi negative-pressure secondary dedust device and application of local spray closure technique
Biao Sun et al.
ADVANCED POWDER TECHNOLOGY (2019)
Dust distribution and control in a coal roadway driven by an air curtain system: A numerical study
Fan Geng et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Continued Increase in Prevalence of Coal Workers' Pneumoconiosis in the United States, 1970-2017
David J. Blackley et al.
AMERICAN JOURNAL OF PUBLIC HEALTH (2018)
Effects of turbulent airflow from coal cutting on pollution characteristics of coal dust in fully-mechanized mining face: A case study
Biao Sun et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Development of a flooded-bed scrubber for removing coal dust at a longwall mining section
Sampurna Arya et al.
SAFETY SCIENCE (2018)
A Time Varying Ventilation and Dust Control Strategy Based on the Temporospatial Characteristics of Dust Dispersion
Hui Liu et al.
MINERALS (2017)
Studying Hygienic Status of Mechanized Long Wall Face from the Perspective of the Existing Dust Containing Silica in Tabas Coal Mine
Hossein Arasteh et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2017)
Influence of fracture-induced weakening on coal mine gateroad stability
Lishuai Jiang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)
Coal workers' pneumoconiosis: an Australian perspective
Graeme R. Zosky et al.
MEDICAL JOURNAL OF AUSTRALIA (2016)
DPM simulation in an underground entry: Comparison between particle and species models
Thiruvengadam Magesh et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2016)
Towards a more sustainable transport sector by numerically simulating fuel spray and pollutant formation in diesel engines
Zvonimir Petranovic et al.
JOURNAL OF CLEANER PRODUCTION (2015)
A coupled CFD-DEM analysis of granular flow impacting on a water reservoir
Tong Shan et al.
ACTA MECHANICA (2014)
CFD-DEM simulation of particle transport and deposition in pulmonary airway
Xiaole Chen et al.
POWDER TECHNOLOGY (2012)
Insertion Loss of Noise Barriers on an Aboveground, Full-Scale Model Longwall Coal Mining Shearer
Daniel D. Sweeney et al.
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2010)
Share Paper
