Related references
Note: Only part of the references are listed.Use natural deep eutectic solvents as efficient green reagents to extract procyanidins and anthocyanins from cranberry pomace and predictive modeling by RSM and artificial neural networking
Mohammed Alrugaibah et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2021)
Impact of acetone-butanol-ethanol (ABE) and gasoline blends on the energy balance of a high-speed spark-ignition engine
Qijun Tang et al.
APPLIED THERMAL ENGINEERING (2021)
Comparison and analysis of the effects of spark timing and lambda on a high-speed spark ignition engine fuelled with n-butanol/gasoline blends
Qijun Tang et al.
FUEL (2021)
Characterization and effect of the use of safflower methyl ester and diesel blends in the compression ignition engine
Balaji Venkatesan et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2021)
Biodiesel and green diesel generation: an overview
Palani Vignesh et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2021)
Analysis of performance parameters of an ethanol fueled spark ignition engine operating with hydrogen enrichment
Sami M. M. E. Ayad et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Impact of changing compression ratio on engine characteristics of an SI engine fueled with equi-volume blend of methanol and gasoline
B. S. Nuthan Prasad et al.
ENERGY (2020)
Influence of alternative fuels on combustion and characteristics of particulate matter morphology in a compression ignition diesel engine
Mohammed A. Fayad et al.
RENEWABLE ENERGY (2020)
Combustion and emission characteristics of isoamyl alcohol-gasoline blends in spark ignition engine
Samet Uslu et al.
FUEL (2020)
Preferences for autonomous and alternative fuel-powered heavy-duty trucks in Germany
Benedikt Anderhofstadt et al.
TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2020)
Performance and Exhaust Emission Prediction of a SI Engine Fueled with I-amyl Alcohol-Gasoline Blends: An ANN Coupled RSM Based Optimization
Samet Uslu et al.
FUEL (2020)
Parametric study of aluminium-rare earth based composites with improved hydrophobicity using response surface method
Vipin Kumar Sharma et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A hybrid ANN-Fuzzy approach for optimization of engine operating parameters of a CI engine fueled with diesel-palm biodiesel-ethanol blend
Suman Dey et al.
ENERGY (2020)
Performance and emission prediction of a compression ignition engine fueled with biodiesel-diesel blends: A combined application of ANN and RSM based optimization
Mustafa Aydin et al.
FUEL (2020)
Study on the combustion characteristics of acetone/n-heptane blend and RON50 reference fuels in an HCCI engine at different compression ratios
Alper Calam
FUEL (2020)
Gasoline engine fueled with bioethanol-bio-acetone-gasoline blends: Performance and emissions exploration
Ashraf Elfasakhany
FUEL (2020)
Experimental study of the performance and emissions characteristics of fusel oil/gasoline blends in spark ignited engine using response surface methodology
Suleyman Simsek et al.
FUEL (2020)
Combustion characteristics, performance and emissions of an acetone/n-heptane fuelled homogenous charge compression ignition (HCCI) engine
Bilal Aydogan
FUEL (2020)
Utilization of primary alcohols in dual-fuel injection mode in a gasoline direct injection engine
Ankur Kalwar et al.
FUEL (2020)
Investigation of the effects of biodiesel/2-ethylhexyl nitrate (EHN) fuel blends on diesel engine performance and emissions by response surface methodology (RSM)
Suleyman Simsek et al.
FUEL (2020)
The effect of alcohol-gasoline fuel blends on the engines' performances and emissions
Wanli Liu et al.
FUEL (2020)
Investigation on 1-heptanol as an oxygenated additive with diesel fuel for compression-ignition engine applications: An approach in terms of energy, exergy, exergoeconomic, enviroeconomic, and sustainability analyses
Battal Dogan et al.
FUEL (2020)
Decanol proportional effect prediction model as additive in palm biodiesel using ANN and RSM technique for diesel engine
A. Naresh Kumar et al.
ENERGY (2020)
Comparative study of different injection modes on combustion and particle emission of acetone-butanol-ethanol (ABE) and gasoline in a dual-injection SI engine
Zezhou Guo et al.
FUEL (2020)
Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: a comparative study
Mohammad Azad Alam et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Experimental performance investigation of Partially Stabilized Zirconia coated low heat rejection diesel engine with waste plastic oil as a fuel
P. Saravanan et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)
Effect of higher and lower order alcohol blending with gasoline on performance, emission and combustion characteristics of SI engine
V. Edwin Geo et al.
FUEL (2019)
Investigation of the effects of diesel-fusel oil fuel blends on combustion, engine performance and exhaust emissions in a single cylinder compression ignition engine
Emre Yilmaz
FUEL (2019)
Study of the energetic needs for the on-board production of Oxy-Hydrogen as fuel additive in internal combustion engines
Pierpaolo Polverino et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Towards a fuller assessment of benefits to children's health of reducing air pollution and mitigating climate change due to fossil fuel combustion
F. Perera et al.
ENVIRONMENTAL RESEARCH (2019)
Catalytic co-gasification of coconut shells and oil palm fronds blends in the presence of cement, dolomite, and limestone: Parametric optimization via Box Behnken Design
Muddasser Inayat et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
Performance-exhaust emission prediction of diesosenol fueled diesel engine: An ANN coupled MORSM based optimization
Subrata Bhowmik et al.
ENERGY (2018)
A comparative analysis of the engine performance, exhaust emissions and combustion behaviors of a compression ignition engine fuelled with biodiesel/diesel/1-butanol (C4 alcohol) and biodiesel/diesel/n-pentanol (C5 alcohol) fuel blends
Murat Kadir Yesilyurt et al.
ENERGY (2018)
Application of response surface methodology in optimization of performance and exhaust emissions of secondary butyl alcohol-gasoline blends in SI engine
I. M. Yusri et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Response surface methodology (RSM) based multi-objective optimization of fusel oil-gasoline blends at different water content in SI engine
Omar I. Awad et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Puffing and Micro-Explosion Behavior in Combustion of Butanol/Jet A-1 and Acetone-Butanol-Ethanol (A-B-E)/Jet A-1 Fuel Droplets
D. Chaitanya Kumar Rao et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2017)
Investigation of the effects of iso-butanol additives on spark ignition engine fuelled with methanol-gasoline blends
Hazim Sharudin et al.
APPLIED THERMAL ENGINEERING (2017)
Investigation of ANN and SVM based on limited samples for performance and emissions prediction of a CRDI-assisted marine diesel engine
Xiaoxiao Niu et al.
APPLIED THERMAL ENGINEERING (2017)
Two-term power models for estimating kinematic viscosities of different biodiesel-diesel fuel blends
Mert Gulum et al.
FUEL PROCESSING TECHNOLOGY (2016)
Performance and exhaust emissions prediction of a CRDI assisted single cylinder diesel engine coupled with EGR using artificial neural network
Sumit Roy et al.
APPLIED ENERGY (2014)
Investigating the effect of combustion properties on the accumulated heat release of DI engines at rated EGR levels using the ANN approach
Hamid Taghavifar et al.
FUEL (2014)
Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network
B. Ghobadian et al.
RENEWABLE ENERGY (2009)
Artificial neural network estimation of global solar radiation using air temperature and relative humidity
Shafiqur Rehman et al.
ENERGY POLICY (2008)
Response surface methodology (RSM) as a tool for optimization in analytical chemistry
Marcos Almeida Bezerra et al.
TALANTA (2008)
Share Paper
