4.6 Review

4D printing of soft orthoses for tremor suppression

Related references

Note: Only part of the references are listed.
Review Chemistry, Applied

Improving 3D/4D printing characteristics of natural food gels by novel additives: A review

Yangyang Chen et al.

Summary: Additives in 3D/4D food printing can enhance the printing characteristics of natural food gels, including improving rheological, thermal, electrostatic, nutritional, and sensory properties. Three main types of additives – lipids, hydrocolloids, and carbohydrates – play a significant role in enhancing these printing characteristics.

FOOD HYDROCOLLOIDS (2022)

Article Automation & Control Systems

Wrist Assisting Soft Wearable Robot With Stretchable Coolant Vessel Integrated SMA Muscle

Jaeyeon Jeong et al.

Summary: This article proposes an artificial muscle based on shape memory alloy (SMA) with an active cooling system. It also introduces a soft wearable robot that uses multiple SMA muscles to assist wrist motion.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2022)

Article Acoustics

Analytical and experimental studies on particle damper used for tremor suppression

Zheng Lu et al.

Summary: This study investigates the effectiveness of particle dampers in reducing tremor amplitude in the human hand. By establishing a mechanical model and conducting numerical simulations and experimental studies, the accuracy of the steady-state solutions and the effectiveness of particle dampers in reducing tremor are validated. The results indicate that a properly designed particle damper is suitable for tremor suppression.

JOURNAL OF VIBRATION AND CONTROL (2021)

Article Acoustics

Active vibration control in human forearm model using paired piezoelectric sensor and actuator

Seyedeh Marzieh Hosseini et al.

Summary: This article presents an active vibration control system to suppress human forearm tremor. By modeling and analyzing the control system with various parameters, the effects on tremor suppression were studied. Results showed that increasing control gain and piezoelectric coefficient magnitude could decrease vibration amplitude.

JOURNAL OF VIBRATION AND CONTROL (2021)

Article Instruments & Instrumentation

Design of fiber-reinforced soft bending pneumatic artificial muscles for wearable tremor suppression devices

Jackson Wirekoh et al.

Summary: Soft robotics, particularly soft pneumatic artificial muscles, have been widely used in wearable technologies, but have not yet addressed hand tremors. A novel fiber-reinforced bending pneumatic artificial muscle has been developed, showing potential for actively suppressing hand tremors.

SMART MATERIALS AND STRUCTURES (2021)

Article Robotics

A Soft Exoskeleton for Tremor Suppression Equipped with Flexible Semiactive Actuator

Ahmad Zahedi et al.

Summary: This study introduces a novel soft exoskeleton system (SETS) for suppressing pathological tremor in patients with Parkinson's disease and essential tremor. The SETS system is equipped with a controllable flexible semiactive actuator, characterized by low mass, compact structure, comfortable wearability and real-time adjustability. Simulation studies and experimental tests demonstrate the significant mechanical efficiency of the SETS system in reducing wrist tremor.

SOFT ROBOTICS (2021)

Article Instruments & Instrumentation

Towards wearable tremor suppression using dielectric elastomer stack actuators

Christopher R. Kelley et al.

Summary: Active wearable tremor suppression devices use actuators to reduce tremor motion, providing non-invasive and robust treatment, but are limited by the bulkiness of current engineering actuators.

SMART MATERIALS AND STRUCTURES (2021)

Article Chemistry, Analytical

3D Printed Shape Memory Polymers Produced via Direct Pellet Extrusion

Trenton Cersoli et al.

Summary: This study investigates the 3D printing process of shape memory polymer-based polyurethane, demonstrating its capability to produce complex parts suitable for smart electronics and morphing structures. The assembled structures were found to recover their original conformation after thermal input, and QR codes were used as unclonable patterns for anti-counterfeiting purposes.

MICROMACHINES (2021)

Article Engineering, Mechanical

Monolithic binary stiffness building blocks for mechanical digital machines

P. R. Kuppens et al.

Summary: This paper introduces two essential building blocks with binary stiffness for mechanical digital machines. By using static balancing to create extreme stiffness states and a mechanical bistable switch for toggling stiffness states, the controllability of stiffness is improved.

EXTREME MECHANICS LETTERS (2021)

Article Engineering, Mechanical

A Soft 3D-Printed Robotic Hand Actuated by Coiled SMA

Eric Deng et al.

Summary: The paper introduces a soft 3D-printed robotic hand design and showcases its main features in terms of grasping capabilities within certain size and weight ranges. This robotic hand utilizes additive manufacturing technology and is equipped with custom-made shape memory alloy actuators, demonstrating its time domain response to different current inputs. The new design enables the robotic hand to be lightweight, low-cost, and have simplified manufacturing processes.

ACTUATORS (2021)

Article Computer Science, Interdisciplinary Applications

Design of a bio-inspired contact-aided compliant wrist

Pietro Bilancia et al.

Summary: This paper discusses the design of a bio-inspired compliant wrist that mimics the asymmetrical behavior of the human wrist when deflecting in different directions. Through specially designed contact pairs and driving mechanisms, the wrist's mobility is realized while withstanding unexpected external loads. Numerical models and physical prototype tests have confirmed the efficacy of the proposed design method.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Article Engineering, Mechanical

Design principles for a single-process 3d-printed accelerometer - theory and experiment

Matic Arh et al.

Summary: Fused-filament fabrication technology has been used for manufacturing various sensors, but faces challenges such as anisotropic behavior and size limitations. This paper focused on the design principles and experimental results of a single-axis accelerometer, providing a foundation for further optimization of the prototype sensor.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Electrical & Electronic

A rapid fabrication approach for the capacitive accelerometer based on 3D printing and a silver particle-free ink

Guandong Liu et al.

Summary: This paper introduces a rapid fabrication approach for capacitive accelerometers by combining 3D printing with a silver particle-free ink, resulting in a highly sensitive and low nonlinearity error device. The accelerometer produced is suitable for monitoring human movements in real-time and shows potential for wearable applications.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Review Chemistry, Physical

A Review of Conductive Carbon Materials for 3D Printing: Materials, Technologies, Properties, and Applications

Yanling Zheng et al.

Summary: Carbon material is widely used as a filler to give insulating polymer electrical and thermal conductivity; 3D printing technology simplifies the production process and enables large-scale personalized production.

MATERIALS (2021)

Article Engineering, Mechanical

Towards Essential Hand Tremor Suppression via Pneumatic Artificial Muscles

Vasileios Skaramagkas et al.

Summary: This study explores the use of Pneumatic Artificial Muscles (PAMs) to suppress Essential Tremor (ET), designing and constructing two iterations of glove setups to exert force on different parts of the hand in an attempt to alleviate ET symptoms. Experimental results show the potential of this method in alleviating ET symptoms, bringing hope to ET patients.

ACTUATORS (2021)

Review Automation & Control Systems

Finite Element Modeling of Soft Fluidic Actuators: Overview and Recent Developments

Matheus S. Xavier et al.

Summary: This review article discusses the finite element analysis of soft actuators, focusing on nonlinear elasticity concepts, material constants determination procedures, constitutive model parameters for silicone rubbers, and overviews of three software packages. The combination of modeling procedures, material properties, and design guidelines presented can serve as a starting point for soft robotic actuator design.

ADVANCED INTELLIGENT SYSTEMS (2021)

Article Robotics

Shape Memory Alloy (SMA) Actuator With Embedded Liquid Metal Curvature Sensor for Closed-Loop Control

Zhijian Ren et al.

Summary: This study presents a novel soft robot actuator embedded with a capacitive liquid metal sensor, allowing dynamic adjustment of the actuation frequency to prevent overheating and long-term degradation issues.

FRONTIERS IN ROBOTICS AND AI (2021)

Article Chemistry, Multidisciplinary

3D Printing of Interdigitated Dielectric Elastomer Actuators

Alex Chortos et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Medicine, General & Internal

Diagnosis and Treatment of Parkinson Disease A Review

Melissa J. Armstrong et al.

JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION (2020)

Article Engineering, Electrical & Electronic

A MEMS based Fabry-Perot accelerometer with high resolution

Minghui Zhao et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2020)

Review Engineering, Biomedical

Functional electrical stimulation therapy for restoration of motor function after spinal cord injury and stroke: a review

Cesar Marquez-Chin et al.

BIOMEDICAL ENGINEERING ONLINE (2020)

Review Materials Science, Multidisciplinary

Closed-loop 4D-printed soft robots

Ali Zolfagharian et al.

MATERIALS & DESIGN (2020)

Article Engineering, Biomedical

Design of a lightweight passive orthosis for tremor suppression

Nicolas Philip Fromme et al.

JOURNAL OF NEUROENGINEERING AND REHABILITATION (2020)

Article Engineering, Mechanical

A Novel Variable Stiffness Compliant Robotic Gripper Based on Layer Jamming

Yuan Gao et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2020)

Article Robotics

Lightweight Highly Tunable Jamming-Based Composites

Yashraj S. Narang et al.

SOFT ROBOTICS (2020)

Review Materials Science, Multidisciplinary

Liquid Metal Direct Write and 3D Printing: A Review

Taylor V. Neumann et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Article Chemistry, Analytical

Development of Soft sEMG Sensing Structures Using 3D-Printing Technologies†

Gerjan Wolterink et al.

SENSORS (2020)

Article Medicine, General & Internal

Local Vibrational Therapy for Essential Tremor Reduction: A Clinical Study

Silvijus Abramavicius et al.

MEDICINA-LITHUANIA (2020)

Proceedings Paper Automation & Control Systems

Dynamic Modeling for Dielectric Elastomer Actuators Based on LSTM Deep Neural Network

Huai Xiao et al.

2020 5TH INTERNATIONAL CONFERENCE ON ADVANCED ROBOTICS AND MECHATRONICS (ICARM 2020) (2020)

Proceedings Paper Engineering, Electrical & Electronic

Hysteresis Compensation of 3D Printed Sensors Using a Power Law Model for Various Input Signals

Martijn Schouten et al.

2020 IEEE SENSORS (2020)

Proceedings Paper Engineering, Electrical & Electronic

A Novel Soft Glove for Hand Tremor Suppression: Evaluation of Layer Jamming Actuator Placement

W. V. Awantha et al.

2020 3RD IEEE INTERNATIONAL CONFERENCE ON SOFT ROBOTICS (ROBOSOFT) (2020)

Article Engineering, Biomedical

Controlling a motorized orthosis to follow elbow volitional movement: tests with individuals with pathological tremor

Gil Herrnstadt et al.

JOURNAL OF NEUROENGINEERING AND REHABILITATION (2019)

Review Chemistry, Analytical

3D Printed Sensors for Biomedical Applications: A Review

Tao Han et al.

SENSORS (2019)

Article Engineering, Electrical & Electronic

Multimaterial 3D Printed Soft Actuators Powered by Shape Memory Alloy Wires

Saeed Akbari et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Article Engineering, Mechanical

Design of dielectric elastomer actuators for vibration control at high frequencies

Itsuro Kajiwara et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Article Engineering, Electrical & Electronic

A novel optical 3D force and displacement sensor - Towards instrumenting the PapillArray tactile sensor

Heba Khamis et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Review Medicine, General & Internal

Essential tremor: diagnosis and management

Vicki Shanker

BMJ-BRITISH MEDICAL JOURNAL (2019)

Article Materials Science, Composites

Versatile magnetorheological plastomer with 3D printability, switchable mechanics, shape memory, and self-healing capacity

Song Qi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Automation & Control Systems

Adaptive notch filter for pathological tremor suppression using permanent magnet linear motor

Amir Hosein Zamanian et al.

MECHATRONICS (2019)

Article Multidisciplinary Sciences

Flexible Temperature Sensor Integrated with Soft Pneumatic Microactuators for Functional Microfingers

Satoshi Konishi et al.

SCIENTIFIC REPORTS (2019)

Article Multidisciplinary Sciences

Mechanical vibration does not systematically reduce the tremor in essential tremor patients

Julio Salvador Lora-Millan et al.

SCIENTIFIC REPORTS (2019)

Article Clinical Neurology

Cost-Effectiveness of Magnetic Resonance-Guided Focused Ultrasound for Essential Tremor

Chunmei Li et al.

MOVEMENT DISORDERS (2019)

Proceedings Paper Computer Science, Artificial Intelligence

Design and Finite Element Analysis of Fiber-Reinforced Soft Pneumatic Actuator

Xianqi Xue et al.

INTELLIGENT ROBOTICS AND APPLICATIONS, ICIRA 2019, PT I (2019)

Article Computer Science, Interdisciplinary Applications

Vib-bracelet: a passive absorber for attenuating forearm tremor

Eran Buki et al.

MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2018)

Article Chemistry, Multidisciplinary

A Self-Powered Sensor Mimicking Slow- and Fast-Adapting Cutaneous Mechanoreceptors

Kyoung-Yong Chun et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Soft Somatosensitive Actuators via Embedded 3D Printing

Ryan L. Truby et al.

ADVANCED MATERIALS (2018)

Article Engineering, Biomedical

A method for characterizing essential tremor from the shoulder to the wrist

Daniel W. Geiger et al.

CLINICAL BIOMECHANICS (2018)

Article Polymer Science

Development of hybrid magnetorheological elastomers by 3D printing

A. K. Bastola et al.

POLYMER (2018)

Review Materials Science, Multidisciplinary

3D printing for soft robotics - a review

Jahan Zeb Gul et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)

Article Engineering, Mechanical

3D printed electrically-driven soft actuators

Ghazaleh Haghiashtiani et al.

EXTREME MECHANICS LETTERS (2018)

Article Robotics

Directly Printable Flexible Strain Sensors for Bending and Contact Feedback of Soft Actuators

Khaled Elgeneidy et al.

FRONTIERS IN ROBOTICS AND AI (2018)

Article Automation & Control Systems

Design and validation of a novel mechatronic transmission system for a wearable tremor suppression device

Yue Zhou et al.

ROBOTICS AND AUTONOMOUS SYSTEMS (2017)

Review Chemistry, Analytical

The Boom in 3D-Printed Sensor Technology

Yuanyuan Xu et al.

SENSORS (2017)

Article Chemistry, Multidisciplinary

A Low-Operating-Power and Flexible Active-Matrix Organic-Transistor Temperature-Sensor Array

Xiaochen Ren et al.

ADVANCED MATERIALS (2016)

Article Medicine, General & Internal

A Randomized Trial of Focused Ultrasound Thalamotomy for Essential Tremor

W. Jeffrey Elias et al.

NEW ENGLAND JOURNAL OF MEDICINE (2016)

Article Engineering, Electrical & Electronic

Mechanical behavior of strain sensors based on PEDOT:PSS and silver nanoparticles inks deposited on polymer substrate by inkjet printing

Michela Borghetti et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

Article Engineering, Electrical & Electronic

Flexible carbon nanotube nanocomposite sensor for multiple physiological parameter monitoring

Anindya Nag et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

Review Engineering, Electrical & Electronic

Evolution of 3D printed soft actuators

Ali Zolfagharian et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

Article Multidisciplinary Sciences

35 Hz shape memory alloy actuator with bending-twisting mode

Sung-Hyuk Song et al.

SCIENTIFIC REPORTS (2016)

Article Automation & Control Systems

Soft robotic glove for combined assistance and at-home rehabilitation

Panagiotis Polygerinos et al.

ROBOTICS AND AUTONOMOUS SYSTEMS (2015)

Article Engineering, Electrical & Electronic

Improved manufacturing process for printed cantilevers by using water removable sacrificial substrate

Almudena Rivadeneyra et al.

SENSORS AND ACTUATORS A-PHYSICAL (2015)

Article Chemistry, Multidisciplinary

3D Optical Printing of Piezoelectric Nanoparticle - Polymer Composite Materials

Kanguk Kim et al.

ACS NANO (2014)

Article Chemistry, Multidisciplinary

Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers

Joseph T. Muth et al.

ADVANCED MATERIALS (2014)

Article Neurosciences

EMG signal morphology and kinematic parameters in essential tremor and Parkinson's disease patients

V. Ruonala et al.

JOURNAL OF ELECTROMYOGRAPHY AND KINESIOLOGY (2014)

Article Clinical Neurology

The safety and efficacy of thalamic deep brain stimulation in essential tremor: 10 years and beyond

Jose Fidel Baizabal-Carvallo et al.

JOURNAL OF NEUROLOGY NEUROSURGERY AND PSYCHIATRY (2014)

Article Clinical Neurology

A Noninvasive Handheld Assistive Device to Accommodate Essential Tremor: A Pilot Study

Anupam Pathak et al.

MOVEMENT DISORDERS (2014)

Article Materials Science, Multidisciplinary

Inkjet printed micropump actuator based on piezoelectric polymers: Device performance and morphology studies

Oliver Pabst et al.

ORGANIC ELECTRONICS (2014)

Article Chemistry, Analytical

Ozone flexible sensors fabricated by photolithography and laser ablation processes based on ZnO nanoparticles

M. Acuautla et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

Article Engineering, Biomedical

Multifunctional Skin-Like Electronics for Quantitative, Clinical Monitoring of Cutaneous Wound Healing

Yoshiaki Hattori et al.

ADVANCED HEALTHCARE MATERIALS (2014)

Article Medicine, General & Internal

A Pilot Study of Focused Ultrasound Thalamotomy for Essential Tremor

W. Jeffrey Elias et al.

NEW ENGLAND JOURNAL OF MEDICINE (2013)

Article Chemistry, Analytical

An Ink-Jet Printed Eddy Current Position Sensor

Nikola Jerance et al.

SENSORS (2013)

Review Clinical Neurology

Distinguishing essential tremor from Parkinson's disease: bedside tests and laboratory evaluations

Mary Ann Thenganatt et al.

EXPERT REVIEW OF NEUROTHERAPEUTICS (2012)

Article Clinical Neurology

Reliability of a new scale for essential tremor

Rodger Elble et al.

MOVEMENT DISORDERS (2012)

Article Nanoscience & Nanotechnology

A stretchable carbon nanotube strain sensor for human-motion detection

Takeo Yamada et al.

NATURE NANOTECHNOLOGY (2011)

Review Clinical Neurology

Non-pharmacological and non-surgical interventions for tremor: A systematic review

Rory J. O'Connor et al.

PARKINSONISM & RELATED DISORDERS (2011)

Article Clinical Neurology

Diagnosis and Treatment of Common Forms of Tremor

Andreas Puschmann et al.

SEMINARS IN NEUROLOGY (2011)

Article Mathematics, Applied

A simple evolutionary topology optimization procedure for compliant mechanism design

Ruben Ansola et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2007)

Article Engineering, Biomedical

Design and validation of a rehabilitation robotic exoskeleton for tremor assessment and suppression

E. Rocon et al.

IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING (2007)

Review Medicine, General & Internal

Differential diagnosis of common tremor syndromes

R Bhidayasiri

POSTGRADUATE MEDICAL JOURNAL (2005)

Article Clinical Neurology

Effects of peripheral cooling on intention tremor in multiple sclerosis

P Feys et al.

JOURNAL OF NEUROLOGY NEUROSURGERY AND PSYCHIATRY (2005)

Article Computer Science, Interdisciplinary Applications

Tuned vibration absorber for suppression of rest tremor in Parkinson's disease

SM Hashemi et al.

MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2004)