4.8 Article

Morphology control of eco-friendly chitosan-derived carbon aerogels for efficient microwave absorption at thin thickness and thermal stealth

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

High-Density Anisotropy Magnetism Enhanced Microwave Absorption Performance in Ti3C2Tx MXene@Ni Microspheres

Caiyue Wen et al.

Summary: This study successfully assembled double-shell MXene@Ni microspheres using a spheroidization strategy to improve microwave absorption performance. The structure offers massive accessible active surfaces and the introduction of Ni nanospikes provides additional magnetic loss capacity.

ACS NANO (2022)

Article Chemistry, Multidisciplinary

A Flexible, Mechanically Strong, and Anti-Corrosion Electromagnetic Wave Absorption Composite Film with Periodic Electroconductive Patterns

Zehao Zhao et al.

Summary: The study introduces a series of polyimide (PI) reinforced composite films with periodic copper-based electroconductive units, showing tunable electrical properties and excellent power loss, multiple scattering, and polarization loss in an alternating electromagnetic field. The obtained films exhibit significant potential as high-performance electromagnetic wave response materials under harsh conditions, with excellent EM shielding performance and specific absorbency value.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

Optimal particle distribution induced interfacial polarization in bouquet-like hierarchical composites for electromagnetic wave absorption

Zehao Zhao et al.

Summary: The study designed a model dielectric material with a carbon-based supported structure and demonstrated that under optimal conditions, nanoparticles supported on carbon substrate can lead to optimal forms of interfacial polarization, enhancing dielectric loss and improving electromagnetic wave absorption properties.

CARBON (2022)

Review Chemistry, Multidisciplinary

3D porous biomass-derived carbon materials: biomass sources, controllable transformation and microwave absorption application

Tian Li et al.

Summary: Efforts have been made to develop high-performance microwave absorption materials to prevent acute electromagnetic pollution and develop efficient stealth materials. Biomass-derived porous materials have attracted attention for their extensive sources, cheap cost, low density, and reusability. Understanding how to obtain optimal absorption capacity and the relationship between structure and properties are important for the development of biomass-based MA materials.

GREEN CHEMISTRY (2022)

Article Chemistry, Physical

The point defect and electronic structure of K doped LaCo0.9Fe0.1O3 perovskite with enhanced microwave absorbing ability

Fan Wang et al.

Summary: ABO(3) perovskites have great research prospect in the field of electromagnetic wave absorption. By systematically regulating the crystal structure and electromagnetic properties through doping, the material shows enhanced microwave absorption capability, with potential applications in practical scenarios like Computer Simulation Technology (CST) simulations.

NANO RESEARCH (2022)

Article Nanoscience & Nanotechnology

Multifunctional Integrated Transparent Film for Efficient Electromagnetic Protection

Gehuan Wang et al.

Summary: This study proposes a reduced graphene oxide (rGO) decorated silver nanowire (Ag NW) film, which combines optical transparency, efficient EMI shielding, durability, and stability. The film demonstrates superior EMI shielding effectiveness and maintains stability after bending and exposure. Additionally, it exhibits fast thermal response and heating stability, making it suitable for wearable devices.

NANO-MICRO LETTERS (2022)

Article Chemistry, Physical

Research progress on nanostructure design and composition regulation of carbon spheres for the microwave absorption

Xinting Chen et al.

Summary: This review discusses the characteristics and principles of microwave absorbing materials, with a focus on the research progress in nanostructure design and composition regulation of carbon spheres. The clever nanostructure design and synergistic effect among different components enable carbon spheres and their composites to exhibit superior microwave absorption performance.

CARBON (2022)

Article Engineering, Manufacturing

Anisotropic electromagnetic wave absorption performance of Polyimide/multi-walled carbon nanotubes composite aerogels with aligned slit-like channels structure

Long Ni et al.

Summary: Polyimide/carboxyl functionalized multi-walled carbon nanotubes composite aerogels with aligned slit-like channels structure were successfully synthesized, showing anisotropic electrical conductivity, electromagnetic wave absorption, and compression properties. One composite aerogel exhibited minimal reflection loss at 12.8 GHz and wide effective absorption bandwidth, demonstrating great potential for aerospace applications.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Review Chemistry, Physical

Nanocellulose-based functional materials for advanced energy and sensor applications

Lumin Chen et al.

Summary: This article comprehensively discusses the recent progress of nanocellulose for emerging energy storage/harvesting and sensor applications. It highlights the preparation methodologies of nanocellulose combined with conductive materials, and focuses on the application of nanocellulose-based advanced materials in areas such as supercapacitors, lithium-ion batteries, solar cells, and sensors. The future research directions of nanocellulose-based functional materials in energy-related devices are also presented.

NANO RESEARCH (2022)

Article Chemistry, Physical

Magnetic-dielectric synergy and interfacial engineering to design yolk-shell structured CoNi@void@C and CoNi@void@C@MoS2 nanocomposites with tunable and strong wideband microwave absorption

Chen Li et al.

Summary: In this paper, yolk-shell structured magnetic multicomponent nanocomposites (MCNCs) were produced and their outstanding electromagnetic wave absorption performances (EMWAPs) were demonstrated. The as-prepared materials exhibited excellent absorption capabilities, broad absorption bandwidth, and thin matching thicknesses due to the unique structures and the synergistic effect between dielectric and magnetic loss. Furthermore, the materials maintained their specific structure even after thermal and hydrothermal processes, and MCNCs with different MoS2 contents could be synthesized by controlling the hydrothermal temperature.

NANO RESEARCH (2022)

Article Chemistry, Applied

Facile fabrication of multifunctional cotton fabric by AgNC@boronate polymer/crosslinked chitosan

Long Xia et al.

Summary: In this study, multifunctional cotton fabrics with electromagnetic wave absorption, mechanical enhancement, flame-retardancy, and antibacterial properties were successfully prepared by coating nanoparticles on the surface of cotton fabrics. These new cotton fabrics have great potential for various applications.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Physical

Construction of hollow core-shelled nitrogen-doped carbon-coated yttrium aluminum garnet composites toward efficient microwave absorption

Hui Luo et al.

Summary: Multi-interfacial hollow core-shelled yttrium aluminum garnet@nitrogen-doped carbon composites exhibit excellent microwave absorption properties and can be used for electromagnetic pollution protection.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Review Nanoscience & Nanotechnology

A Novel Strategy in Electromagnetic Wave Absorbing and Shielding Materials Design: Multi-Responsive Field Effect

Yue Zhao et al.

Summary: The use of electromagnetic (EM) devices has become widespread in various fields, but it also brings about issues such as signal pollution and radiation. To tackle these problems, researchers have been working on developing electromagnetic wave absorbing and shielding (EMAS) materials. However, most of the reported materials only possess the EMAS property. In practical applications, materials with excellent tunable absorption bands are needed. This review focuses on different external field-responsive materials and provides a detailed summary of various action mechanisms, materials synthesis methods, and macrostructures. The future trends in developing novel external field-responsive materials are also discussed.

SMALL SCIENCE (2022)

Review Chemistry, Physical

Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: Recent progress, challenges and prospects

Nannan Wu et al.

Summary: The rapid development of electronic devices has raised concerns about electromagnetic radiation issues, and the most effective way to address electromagnetic pollution is to fabricate electromagnetic interference shielding materials and microwave absorption materials with lightweight and strong attenuation abilities. Carbon nanocomposites have attracted attention in the field of electromagnetic interference shielding due to their low density, natural abundance, easy preparation, excellent conductivity, and flexibility. Recent advancements in carbon materials as ESMs/MAMs have shown that 3D carbon materials and novel composites have the potential to enhance electromagnetic interference shielding efficiency.

CARBON (2021)

Article Engineering, Environmental

Design of cellular structure of graphene aerogels for electromagnetic wave absorption

Xiaogu Huang et al.

Summary: The controlled manipulation of pore structure in reduced graphene oxide aerogels through freeze-thaw assembly has led to the development of ultralight and highly porous aerogels with outstanding microwave absorption performance. This work demonstrates the promising application of pore structure engineering in producing lightweight and multifunctional graphene aerogel-based microwave absorbers for complex environmental conditions.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Multidisciplinary

Constructing flower-like core@shell MoSe2-based nanocomposites as a novel and high-efficient microwave absorber

Jingjing Zhang et al.

Summary: A high-efficiency flowerlike FeSe2@MoSe2 core@shell nanocomposite was synthesized through a simple in situ hydrothermal reaction, demonstrating optimal reflection loss values and effective frequency bandwidth for electromagnetic wave attenuation. The nanocomposite showed extraordinary absorption capabilities and broad absorption bandwidth with very thin matching thicknesses, making it a desirable candidate for high-performance microwave absorption materials.

COMPOSITES PART B-ENGINEERING (2021)

Article Materials Science, Multidisciplinary

Extremely strong and tough chitosan films mediated by unique hydrated chitosan crystal structures

Qing Zhang et al.

Summary: A new route was reported for the fabrication of high-strength and high-toughness chitosan films mediated by a hydrated chitosan crystal structure, with specific solvent and neutralization bath. Stretching orientation contributes to the improvement of mechanical properties of chitosan films.

MATERIALS TODAY (2021)

Article Chemistry, Physical

Carbon fibers embedded with FeIII-MOF-5-derived composites for enhanced microwave absorption

Jiabin Chen et al.

Summary: FMCFs composites show excellent electromagnetic wave absorption capability and have the potential for wide applications in the field of electromagnetic wave absorbing coatings. The control mechanism of the excellent electromagnetic wave absorption comes from magnetic loss, dipole polarization loss, and interface polarization. Simulation technology combined with material design is meaningful for researching the absorption mechanism and rational design of EM wave absorbing coatings.

CARBON (2021)

Article Nanoscience & Nanotechnology

Environmentally Friendly and Multifunctional Shaddock Peel-Based Carbon Aerogel for Thermal-Insulation and Microwave Absorption

Weihua Gu et al.

Summary: The eco-friendly shaddock peel-derived carbon aerogels were prepared via freeze-drying method, combining multiple functions such as thermal insulation, compression resistance, and microwave absorption. With minimum reflection loss in X band and wide effective absorption bandwidth, the carbon aerogels can achieve high radar cross-sectional reduction values. The novel computer simulation technology used in this study paves the way for preparing multi-functional microwave absorbers derived from biomass raw materials.

NANO-MICRO LETTERS (2021)

Article Chemistry, Physical

A versatile N-doped honeycomb-like carbonaceous aerogels loaded with bimetallic sulfide and oxide for superior electromagnetic wave absorption and supercapacitor applications

Guilin Song et al.

Summary: A versatile honeycomb-like N-doped carbon/bimetallic sulfide and oxide composites aerogel with excellent electromagnetic wave absorption and electrochemical performances was designed in this study, showing great potential for environmental remediating materials in the future.

CARBON (2021)

Article Chemistry, Physical

Synthesis of ultralight three-dimensional nitrogen-doped reduced graphene oxide/multi-walled carbon nanotubes/zinc ferrite composite aerogel for highly efficient electromagnetic wave absorption

Ningning Li et al.

Summary: The study synthesized a nitrogen-doped reduced graphene oxide/multi-walled carbon nanotubes/zinc ferrite (NRGO/MWCNTs/ZnFe2O4) composite aerogel with a unique three-dimensional porous netlike structure, exhibiting strong electromagnetic wave absorption performance. The composite aerogel showed significantly enhanced EMW absorption capacity at ultra-thin matching thickness and proposed possible absorption mechanisms.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Lightweight, Fire-Retardant, and Anti-Compressed Honeycombed-Like Carbon Aerogels for Thermal Management and High-Efficiency Electromagnetic Absorbing Properties

Jia Xu et al.

Summary: In this study, honeycombed-like carbon aerogels with embedded Co@C nanoparticles were successfully fabricated by directionally freeze-casting and carbonization method, showing excellent electromagnetic wave absorption properties, low density, fire-retardant properties, and high thermal management capabilities.

SMALL (2021)

Article Nanoscience & Nanotechnology

Flexible and Waterproof 2D/1D/0D Construction of MXene-Based Nanocomposites for Electromagnetic Wave Absorption, EMI Shielding, and Photothermal Conversion

Zhen Xiang et al.

Summary: An electrostatic assembly approach was used to fabricate Ti3C2Tx/CNTs/Co nanocomposites, showcasing outstanding electromagnetic wave absorption, EMI shielding, and photothermal conversion performance, making them highly promising for the next-generation intelligent electromagnetic attenuation system.

NANO-MICRO LETTERS (2021)

Article Chemistry, Multidisciplinary

Combining acid-based deep eutectic solvents and microwave irradiation for improved chestnut shell waste valorization

Jose Gonzalez-Rivera et al.

Summary: A microwave/deep eutectic solvent-assisted extraction process was developed for obtaining value-added compounds from chestnut shell waste, with ChCl-oxalic acid identified as a sensitive and efficient system for polyphenol extraction. The extraction efficiency was evaluated under different conditions, revealing the ability of the oxalic acid-based DES to simultaneously remove lignin during polyphenol extraction. Overall, the process allows for fast, cheap, and tunable processing of food waste to yield a high amount of valuable bioactive compounds.

GREEN CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Cellulose nanofiber derived carbon aerogel with 3D multiscale pore architecture for high-performance supercapacitors

Lumin Chen et al.

Summary: Carbon materials with hierarchical porous structure have the potential to be excellent electrode materials for supercapacitors. By engineering the pyrolysis chemistry of carbon nanofibers, 3D interconnected hierarchical porous carbon aerogels were developed, showing high capacitance, rate capability, and cycling stability for high-performance energy storage applications.

NANOSCALE (2021)

Article Chemistry, Physical

Enhanced electromagnetic wave absorption of magnetic Co nanoparticles/CNTs/EG porous composites with waterproof, flame-retardant and thermal management functions

Zhen Xiang et al.

Summary: The study demonstrated the high-performance electromagnetic absorption characteristics of magnetic cobalt nanoparticles suspended in carbon nanotubes/expanded graphite porous composites. The well-designed multi-component structure endowed the composites with enhanced absorption performance, achieving high reflection loss, ultrathin thickness, wide absorption bandwidth, and low filler loading.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

Poly(vinylidene fluoride) Modified Commercial Paper as a Separator with Enhanced Thermal Stability and Electrolyte Affinity for Lithium-ion Battery

Ze Zhang et al.

Summary: The novel reinforced composite separator, consisting of modified commercial paper with PVDF, exhibits excellent electrolyte wettability, high ionic conductivity, thermal stability, mechanical strength, and outstanding interfacial compatibility with Li metal anode. This composite separator significantly improves the cycle durability and rate performance of Li-ion batteries, indicating great potential for high-safety and electrochemical performance batteries.

ENERGY & ENVIRONMENTAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Lightweight and Flexible Cotton Aerogel Composites for Electromagnetic Absorption and Shielding Applications

Yan Cheng et al.

ADVANCED ELECTRONIC MATERIALS (2020)

Article Chemistry, Multidisciplinary

Novel agaric-derived olive-like yolk-shell structured MnO@C composites for superior lithium storage

Lingfeng Zhu et al.

CHEMICAL COMMUNICATIONS (2020)

Article Materials Science, Multidisciplinary

Catechol-Attached Polypeptide with Functional Groups as Electrochemical Sensing Platform for Synthetic Cannabinoids

Ceren Durmus et al.

ACS APPLIED POLYMER MATERIALS (2020)

Article Engineering, Environmental

Biomass-derived carbon and polypyrrole addition on SiC whiskers for enhancement of electromagnetic wave absorption

Shun Dong et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Nanoscience & Nanotechnology

Biomass-Derived Porous Carbon-Based Nanostructures for Microwave Absorption

Huanqin Zhao et al.

NANO-MICRO LETTERS (2019)

Review Materials Science, Composites

Stealth technology: Methods and composite materials-A review

Husnain Ahmad et al.

POLYMER COMPOSITES (2019)

Article Chemistry, Multidisciplinary

Ultrabroad Band Microwave Absorption of Carbonized Waxberry with Hierarchical Structure

Xianxian Sun et al.

SMALL (2019)

Article Thermodynamics

Infrared emissivity characterization of carbon nanotubes dispersed poly (ethylene terephthalate) fibers

M. C. Larciprete et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Article Materials Science, Multidisciplinary

A glass-ceramic coating with self-healing capability and high infrared emissivity for carbon/carbon composites

Qiang Zhen et al.

CORROSION SCIENCE (2018)

Article Chemistry, Physical

The similar Cole-Cole semicircles and microwave absorption of Hexagonal Co/C composites

Wenjia Xing et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Engineering, Environmental

Chitin and Chitosan: Structure, Properties and Applications in Biomedical Engineering

S. Islam et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)

Review Chemistry, Physical

Dielectric polarization in electromagnetic wave absorption: Review and perspective

Bin Quan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Materials Science, Multidisciplinary

First-principle calculations and experimental investigation on the infrared emissivity property of Mg-doped ZnO

Tengchao Guo et al.

MATERIALS RESEARCH BULLETIN (2017)

Article Nanoscience & Nanotechnology

Carbon Hollow Microspheres with a Designable Mesoporous Shell for High-Performance Electromagnetic Wave Absorption

Hailong Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Chitosan as a rainfastness adjuvant for agrochemicals

Brett L. Symonds et al.

RSC ADVANCES (2016)

Article Biochemistry & Molecular Biology

Chitosan pyrolysis and adsorption properties of chitosan and its carbonizate

Halina Kaczmarek et al.

CARBOHYDRATE RESEARCH (2010)

Article Chemistry, Physical

Physicochemical characterization of chitosan nanoparticles:: electrokinetic and stability behavior

T López-León et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2005)

Article Food Science & Technology

Edible antimicrobial films based on chitosan matrix

V Coma et al.

JOURNAL OF FOOD SCIENCE (2002)