☆ 4.2 Article

Construction of a novel polytetrafluoroethylene-based sealant paste: The effect of polyvinyl butyral (PVB) and nano-alumina on the sealing performance and construction formulations

RESULTS IN ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

African almond (Terminalia catappa L) leaves biochar prepared through pyrolysis using H3PO4 as chemical activator for sequestration of methylene blue dye

Jamiu Mosebolatan Jabar et al.

Summary: African almond leaves were used to prepare a sustainable and eco-friendly adsorbent for the removal of methylene blue dye from aqueous solution. The phosphoric acid activated African almond leaves biochar exhibited excellent adsorption efficiency. The study concluded that PALB has the potential to be a green adsorbent for the adsorption of MB dye from aqueous solution.

RESULTS IN ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Cockle (Anadara granosa) shells-based hydroxyapatite and its potential for defluoridation of drinking water

Stanslaus G. Mtavangu et al.

Summary: This study describes the synthesis and characterization of a hydroxyapatite-based adsorbent derived from biogenic cockle shells for defluoridation of drinking water. The synthesized HAp showed good adsorption capacity for fluoride removal and performed better than bone char. The study suggests that HAp derived from Anadara granosa shells could be a viable option for defluoridation of drinking water.

RESULTS IN ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Biodegradable, physical and microbial analysis of tamarind seed starch infused eco-friendly bioplastics by different percentage of Arjuna powder

MohammanAsaduzzaman Chowdhury et al.

Summary: The rapid increase in global plastic production poses a significant threat to our health and climate. In response to the environmental issues caused by non-disposable petroleum-based plastics, researchers have been engaged in bioplastic research to create eco-friendly plastics using natural ingredients. This study aimed to develop environmentally-friendly plastics using low-cost natural resources such as tamarind and Arjuna, with properties compatible with mechanical, thermal, and antimicrobial requirements. The synthesized bioplastics were subjected to various tests including biodegradability, mechanical strength, FTIR analysis, SEM analysis, XRD analysis, thermal analysis, and antimicrobial testing. The results showed that the samples were biodegradable, with a biodegradation rate of 73% in just 30 days. The synthesized bioplastics exhibited a tensile strength of 5.23 N/mm(2), and FTIR analysis confirmed the presence of functional groups. Only a 5% weight loss was observed at temperatures above room temperature in the thermal analysis. The antibacterial test demonstrated the efficiency of the plastic against viruses.

RESULTS IN ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Theoretical and surface/electrochemical investigations of walnut fruit green husk extract as effective inhibitor for mild-steel corrosion in 1M HCl electrolyte

A. R. Shahmoradi et al.

Summary: The study investigated the corrosion inhibition property of Juglone extracted from walnut green husk on mild steel samples exposed to an acid electrolyte. The results showed that the efficiency of the inhibitor increased with higher concentration and reached 95% with 800 ppm of green corrosion inhibitor after 8 hours of immersion. Additionally, the extracted GCI functioned as a mixed-type corrosion inhibitor, as revealed by Tafel extrapolated polarization results.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Physical

Modified hydroxyethyl cellulose as a highly efficient eco-friendly inhibitor for suppression of mild steel corrosion in a 15% HCl solution at elevated temperatures

Abdolreza Farhadian et al.

Summary: A new method using polyurethane chemistry to enhance the inhibition activity of natural polymer-based corrosion inhibitors was introduced, showing significantly improved efficiency in suppressing corrosion even at high temperatures. Experimental results, as well as theoretical computations and simulations, provided insights into the molecular-level interactions and protective mechanisms of the modified hydroxyethylcellulose, demonstrating its potential as an effective approach for corrosion protection in aggressive acidic environments.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Biomimetic nano-c-HAp hybrid layer engineering and determination of mechanisms of its integration with native hard dental tissue

Pavel Seredin et al.

Summary: This letter provides information on the engineering of a biomimetic layer between human dentin and dental material, as well as the use of multivariate statistical analysis of synchrotron spectral data to determine the molecular composition and integration mechanisms of the hybrid biomimetic layer and native hard dental tissue.

RESULTS IN ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Instrumental and thermal characterization of the sludge generated after bio-coagulation treatment (GSABT) of petroleum produced water (PW)

I. G. Ezemagu et al.

Summary: The study investigated the instrumental, thermal and settling characteristics of sludge generated after bio-coagulation treatment of petroleum produced water. Various analysis techniques were employed to examine the structure, composition and thermal stability of the sludge. The settling behavior and filterability of the sludge were also studied, demonstrating specific cake resistance and filter medium resistance. Additionally, the sludge was found to contain essential elements and could potentially be further beneficiated for economic purposes.

RESULTS IN ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

L-cysteine reduced/functionalized graphene oxide application as a smart/control release nanocarrier of sustainable cerium ions for epoxy coating anticorrosion properties improvement

Ali Asghar Javidparvar et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Polymer Science

Processing Analysis of Nanoparticle Filled PTFE: Restrictions and Limitations of High Temperature Production

Levente Ferenc Toth et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Ion-exchange process for the removal of Ni (II) and Co (II) from wastewater using modified clinoptilolite: Modeling by response surface methodology and artificial neural network

John Kabuba et al.

RESULTS IN ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Study of modifications on the chemical and mechanical compatibility between cement matrix and oil palm fibres

P-A Bonnet-Masimbert et al.

RESULTS IN ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An ultrafast self-healing polydimethylsiloxane elastomer with persistent sealing performance

Da-Peng Wang et al.

MATERIALS CHEMISTRY FRONTIERS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Development of kenaf shive bio-mop via surface deposit technique for water remediation from crude oil spill contamination

Z. M. Salisu et al.

RESULTS IN ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Sustainable and clean treatment of industrial wastewater with microbial fuel cell

Omprakash Sahu

RESULTS IN ENGINEERING (2019)

Add to Collection

Article Environmental Sciences

Validation of ATR FT-IR to identify polymers of plastic marine debris, including those ingested by marine organisms

Melissa R. Jung et al.

MARINE POLLUTION BULLETIN (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Rheological, mechanical and thermal properties of the PA/PVB blends and their nanocomposites: Structure-property relationships

Ali Reza Zanjanijam et al.

POLYMER TESTING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of polytetrafluoroethylene nanofibrous membranes for guided bone regeneration

Jin-Young Park et al.

RSC ADVANCES (2018)

Add to Collection

Article Engineering, Multidisciplinary

Preparation and characterization of polytetrafluoroethylene (PTFE)/Thermally Expanded Graphite (TEG) nanocomposites

M. Sahli et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Environmental Sciences

Influence factors analysis of a flexible gel sealing material for coal-bed methane drainage boreholes

Cheng Zhai et al.

ENVIRONMENTAL EARTH SCIENCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of zinc oxide/talc nanocomposite for enhanced lead adsorption from aqueous solutions

Hannatu Abubakar Sani et al.

RSC ADVANCES (2016)

Add to Collection

Article Engineering, Chemical

Synthesis of CaCO3 nanoparticles by controlled precipitation of saturated carbonate and calcium nitrate aqueous solutions

Romuald Babou-Kammoe et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2012)

Add to Collection

Article Polymer Science

Preparation and characterization of Polyvinylbutyral/Graphene Nanocomposite

Mortaza Hajian et al.

JOURNAL OF POLYMER RESEARCH (2012)

Add to Collection

Article Materials Science, Ceramics

Pyrolysis of polyvinyl butyral (PVB) binder in thermoelectric green tapes

LA Salam et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.