Related references
Note: Only part of the references are listed.Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste
Dengji Xu et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)
Characterization of Friction Stir-Welded Polylactic Acid/Aluminum Composite Primed through Fused Filament Fabrication
Ranvijay Kumar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)
Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications
R. A. Ilyas et al.
POLYMERS (2022)
Natural Fiber-Reinforced Polycaprolactone Green and Hybrid Biocomposites for Various Advanced Applications
R. A. Ilyas et al.
POLYMERS (2022)
3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
M. N. M. Azlin et al.
POLYMERS (2022)
Influence of Nano-CuO on Synthesis and Mechanical Behavior of Spent Alumina Catalyst and Grinding Sludge Reinforced Aluminum Based Composite
Shashi Prakash Dwivedi et al.
INTERNATIONAL JOURNAL OF METALCASTING (2022)
Implementation of Taguchi and Genetic Algorithm Techniques for Prediction of Optimal Part Dimensions for Polymeric Biocomposites in Fused Deposition Modeling
Raman Kumar et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2022)
Recovery of Cr from chrome-containing leather waste and its utilization as reinforcement along with waste spent alumina catalyst and grinding sludge in AA 5052-based metal matrix composites
Shashi P. Dwivedi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)
Natural-Fiber-Reinforced Chitosan, Chitosan Blends and Their Nanocomposites for Various Advanced Applications
Rushdan Ahmad Ilyas et al.
POLYMERS (2022)
Recent developments in RAM based MWCNT composite materials: a short review
I. V. S. Yeswanth et al.
FUNCTIONAL COMPOSITES AND STRUCTURES (2022)
Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al-Cu-Mg-T351) alloy cast nanocomposites fabricated by optimized mechanical milling and powder metallurgy techniques
Shubham Sharma et al.
NANOTECHNOLOGY REVIEWS (2022)
Development of Marble Dust/Waste PET Based Polymer Composite Material for Environmental Sustainability: Fabrication and Characterizations
Anas Islam et al.
MATERIALS PERFORMANCE AND CHARACTERIZATION (2021)
Multi-objective Optimization of Kerf-taper and Surface-roughness Quality Characteristics for Cutting-operation On Coir and Carbon Fibre Reinforced Epoxy Hybrid Polymeric Composites During CO2-Pulsed Laser-cutting Using RSM
Yadvinder Singh et al.
Lasers in Manufacturing and Materials Processing (2021)
Influence of SAC and eggshell addition in the physical, mechanical and thermal behaviour of Cr reinforced aluminium based composite
Shashi Prakash Dwivedi et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2021)
Recycling of Chrome-Tanned Leather and Its Utilization as Polymeric Materials and in Polymer-Based Composites: A Review
Mariafederica Parisi et al.
POLYMERS (2021)
Effect of Friction Stir Process Parameters on Mechanical Properties of Chrome Containing Leather Waste Reinforced Aluminium Based Composite
Shashi Prakash Dwivedi et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
Investigation on the mechanical, tribological, morphological and machinability behavior of stir-casted Al/SiC/Mo reinforced MMCs
Jatinder Kumar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Use of Industrial Wastes as Sustainable Nutrient Sources for Bacterial Cellulose (BC) Production: Mechanism, Advances, and Future Perspectives
Abudukeremu Kadier et al.
POLYMERS (2021)
Comparative Analysis of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Based Thermosetting Polymer Composites for Human Prosthetic Applications Using Taguchi Design
Jeetendra Mohan Khare et al.
POLYMERS (2021)
Critical Review of Natural Fiber Reinforced Hybrid Composites: Processing, Properties, Applications and Cost
M. J. Suriani et al.
POLYMERS (2021)
Assessment of Dimensional Stability, Biodegradability, and Fracture Energy of Bio-Composites Reinforced with Novel Pine Cone
Kanishka Jha et al.
POLYMERS (2021)
Synthesis and characterisation of chromium, eggshell and grinding sludge-reinforced aluminium metal matrix composite: an experimental approach
Shashi Prakash Dwivedi et al.
GREEN MATERIALS (2021)
Computational and experimental investigation on mechanical behavior of zirconia toughened alumina and nickel powder reinforced EN31 based composite materialRechnerische und experimentelle Untersuchungen zum mechanischen Verhalten von 100Cr6 basiertem Verbundwerkstoff verstarkt durch Zirkonoxid duktilisiertes Aluminiumoxid und Nickelpulver
A. Saxena et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2021)
Investigation on mechanical, tribological and microstructural properties of Al-Mg-Si-T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications
Shubham Sharma et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Study of CCLW, Alumina and the Mixture of Alumina- and CCLW-Reinforced Aluminum-Based Composite Material with and Without Mechanical Alloying
Shashi Prakash Dwivedi et al.
Journal of The Institution of Engineers (India): Series D (2021)
Multifunctional polyurethane sponge coatings with excellent flame retardant, antibacterial, compressible, and recyclable properties
Chengwei Liu et al.
COMPOSITES PART B-ENGINEERING (2021)
Optimization of FFF Process Parameters by Naked Mole-Rat Algorithms with Enhanced Exploration and Exploitation Capabilities
Jasgurpreet Singh Chohan et al.
POLYMERS (2021)
Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications
Shubham Sharma et al.
POLYMERS (2021)
Polymer Composites Filled with Metal Derivatives: A Review of Flame Retardants
R. A. Ilyas et al.
POLYMERS (2021)
Critical Review of Biodegradable and Bioactive Polymer Composites for Bone Tissue Engineering and Drug Delivery Applications
Shubham Sharma et al.
POLYMERS (2021)
Effect of ball-milling process parameters on mechanical properties of Al/Al2O3/collagen powder composite using statistical approach
Shashi Prakash Dwivedi et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications
Pankaj Singh Chandel et al.
FUNCTIONAL COMPOSITES AND STRUCTURES (2021)
Circular economy in biocomposite development: State-of-the-art, challenges and emerging trends
Vigneshwaran Shanmugam et al.
COMPOSITES PART C: OPEN ACCESS (2021)
A waterborne polyurethane-based leather finishing agent with excellent room temperature self-healing properties and wear-resistance
Chao Liu et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)
Experimental study on thermal and morphological analyses of green composite sandwich made of flax and agglomerated cork
S. Prabhakaran et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Utilization of rapid prototyping technology for the fabrication of an orthopedic shoe inserts for foot pain reprieve using thermo-softening viscoelastic polymers: A novel experimental approach
Shubham Sharma et al.
MEASUREMENT & CONTROL (2020)
Empirical Investigations during WEDM of Ni-27Cu-3.15Al-2Fe-1.5Mn Based Superalloy for High Temperature Corrosion Resistance Applications
Vivek Aggarwal et al.
MATERIALS (2020)
Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm
Jasgurpreet Singh Chohan et al.
POLYMERS (2020)
Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts
Jasgurpreet Singh Chohan et al.
MATERIALS (2020)
An experimental study of wire breakage frequency on different electrodes during WEDM of Inconel-722
Vivek Aggarwal et al.
5TH INTERNATIONAL CONFERENCE ON MATERIALS AND MANUFACTURING ENGINEERING-2020 (ICMME-2020) (2020)
Comparative study on the mechanical, tribological, morphological and structural properties of vortex casting processed, Al-SiC-Cr hybrid metal matrix composites for high strength wear-resistant applications: Fabrication and characterizations
Jatinder Kumar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Fabrication and characterization of coir/carbon-fiber reinforced epoxy based hybrid composite for helmet shells and sports-good applications: influence of fiber surface modifications on the mechanical, thermal and morphological properties
Yadvinder Singh et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Novel PEEK/nHA composites fabricated by hot-pressing of 3D braided PEEK matrix
J. Ma et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)
Empirical Modeling of Machining Parameters during WEDM of Inconel 690 using Response Surface Methodology
Vivek Aggarwal et al.
THIRD INTERNATIONAL CONFERENCE ON INVENTIVE MATERIAL SCIENCE APPLICATIONS (ICIMA 2020) (2020)
Research progress for plastic waste management and manufacture of value-added products
Duo Pan et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)
Evaluation of surface roughness in the turning of mild steel under different cutting conditions using backpropagation neural network
Mohamed Rafik Noor Mohamed Qureshi et al.
PROCEEDINGS OF THE ESTONIAN ACADEMY OF SCIENCES (2020)
Alkali treated coir/pineapple leaf fibres reinforced PLA hybrid composites: Evaluation of mechanical, morphological, thermal and physical properties
R. Siakeng et al.
EXPRESS POLYMER LETTERS (2020)
A review on the extraction of pineapple, sisal and abaca fibers and their use as reinforcement in polymer matrix
S. Radoor et al.
EXPRESS POLYMER LETTERS (2020)
Process Optimization for Compression Molding of Carbon Fiber-Reinforced Thermosetting Polymer
Jiuming Xie et al.
MATERIALS (2019)
Synthesis and characterization of post-sulfonated poly(arylene ether sulfone) membranes for potential applications in water desalination
Shreya Roy Choudhury et al.
POLYMER (2019)
Fabrication and optimization of hybrid AA-6082-T6 alloy/8%Al2O3(Alumina)/2%Grp metal matrix composites using novel Box-Behnken methodology processed by wire-sinking electric discharge machining
Shubham Sharma et al.
MATERIALS RESEARCH EXPRESS (2019)
Investigation of alumina nanofiller impact on the structural and dielectric properties of PEO/PMMA blend matrix-based polymer nanocomposites
R. J. Sengwa et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Combined effect of micro- and nano-fillers on mechanical, thermal, and morphological behavior of glass-carbon PA66/PTFE hybrid nano-composites
B. M. Rudresh et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Experimental investigation of mechanical and machining parameters of hybrid nanoclay glass fiber-reinforced polyester composites
P. Prabhu et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Characterization and structural performance of hybrid fiber-reinforced composite deck panels
R. Gopinath et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Dynamic mechanical properties of natural fiber composites-a review
R. B. Ashok et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Mechanical properties and water absorption behavior of injection-molded wood fiber/carbon fiber high-density polyethylene hybrid composites
Gangjian Guo et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites: a review
Tushar Kanti Das et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Photo-polymerized trifunctional acrylate resin/magnesium hydroxide fluids/cotton fabric composites with enhancing mechanical and moisture barrier properties
Yi Qin et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Tailoring strength and modulus by 3D printing different continuous fibers and filled structures into composites
Hui Mei et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Enhanced mechanical and tribological performance of PA66 nanocomposites containing 2D layered α-zirconium phosphate nanoplatelets with different sizes
Haoyang Sun et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Utilization of waste leather for the fabrication of composites and to study its mechanical and thermal properties
Ravindra D. Kale et al.
SN APPLIED SCIENCES (2019)
Optimization of mechanical properties of silk fiber-reinforced polypropylene composite using Box-Behnken experimental design
Rajkumar Govindaraju et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
Optimization of Mechanical Properties for Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites Using Response Surface Methodology
Jasbir Singh Kunnan Singh et al.
POLYMERS (2018)
Processing and characterization of waste leather based polycaprolactone biocomposites
Seena Joseph et al.
POLYMER COMPOSITES (2017)
Sustainable packaging materials from tannery trimming solid waste: A new paradigm in wealth from waste approaches
Dineshkumar Masilamani et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Gelatin capsule waste: new source of protein to develop a biodegradable film
Camila de Campo et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2017)
Development of a flexible composite from leather industry waste and evaluation of their physico-chemical properties
Pallav Saikia et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2017)
The status and developments of leather solid waste treatment: A mini-review
Huiyan Jiang et al.
WASTE MANAGEMENT & RESEARCH (2016)
Injection Molded Noil Hemp Fiber Composites: Interfacial Shear Strength, Fiber Strength, and Aspect Ratio
Amir Etaati et al.
POLYMER COMPOSITES (2016)
Application of Design of Experiment (DoE) for Parameters Optimization in Compression Moulding for Flax Reinforced Biocomposites
M. I. Mat Kandar et al.
5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP) (2016)
Eco-friendly waste management strategies for greener environment towards sustainable development in leather industry: a comprehensive review
J. Kanagaraj et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Synthesis and characterization of polybenzimidazoles derived from tetraaminodiphenylsulfone for high temperature gas separation membranes
Hailun Borjigin et al.
POLYMER (2015)
Recycling of finished leather wastes: a novel approach
Rethinam Senthil et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2015)
Natural rubber/leather waste composite foam: A new eco-friendly material and recycling approach
Nelissa Goncalves Garcia et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Effects of modifications of bamboo cellulose fibers on the improved mechanical properties of cellulose reinforced poly(lactic acid) composites
Tingju Lu et al.
COMPOSITES PART B-ENGINEERING (2014)
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. M. Kabir et al.
COMPOSITES PART B-ENGINEERING (2012)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Recovery and Utilization of Chromium-Tanned Proteinous Wastes of Leather Making: A Review
V. John Sundar et al.
CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2011)
Simple models and optimization of compression resin transfer molding process
Adil Mamoune et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Preparation and Characterization of Poly (Vinyl Butyral)-Leather Fiber Composites
J. D. Ambrosio et al.
POLYMER COMPOSITES (2011)
Improvement of compression set property of ethylene vinyl acetate copolymer/ethylene-1-butene copolymer/organoclay nanocomposite foams
Keun-Wan Park et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Preparation and properties of metallocene ethylene copolymer crosslinked by vinyltrimethoxysilane
K Sirisinha et al.
POLYMER INTERNATIONAL (2005)
Thermal and mechanical properties of silane-grafted water crosslinked polyethylene
HC Kuan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Vulcanization characteristics and mechanical properties of natural rubber-scrap rubber compositions filled with leather particles
K Ravichandran et al.
POLYMER INTERNATIONAL (2005)
Comparison in processability and mechanical and thermal properties of ethylene-octene copolymer crosslinked by different techniques
K Sirisinha et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Production of leather-like composites using short leather fibers.: II.: Mechanical characterization
TJ Madera-Santana et al.
POLYMER COMPOSITES (2002)
Waste leather particles as a filler for poly(vinyl chloride) plastisols
AG Andreopoulos et al.
JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY (2000)