☆ 4.6 Article

Seismic Fragility Analysis of Mega-Frame with Vibration Control Substructure Based on Dual Surrogate Model and Active Learning

BUILDINGS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Aseismic Optimization of Mega-sub Controlled Structures Based on Gaussian Process Surrogate Model

Yanjie Xiao et al.

Summary: This paper proposes an efficient optimization design procedure for seismic resistance in the complex seismic characteristics of mega-sub controlled structures (MSCS). By establishing an optimization problem model based on time history analysis and using Gaussian process regression surrogate models, expected improvement, and constrained expected improvement criteria, the structural optimization design is achieved. Through validation with two examples, it is demonstrated that the method is efficient and effective in optimizing structures under earthquake loads.

KSCE JOURNAL OF CIVIL ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Framework for the mainshock-aftershock fragility analysis of containment structures incorporating the effect of mainshock-damaged states

Xu Bao et al.

Summary: This paper proposes a framework for the fragility evaluation of containment structures under mainshock-aftershock excitations, which can effectively incorporate the impact of mainshock-damaged states. The study establishes a joint seismic demand model using copula technique and utilizes bi-dimensional limit-state functions to measure structure performance. Fragility curves are developed using the Monte Carlo method, allowing for direct consideration of mainshock-damaged levels in failure probability computation.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Response control analysis of a new mega-subcontrolled structural system (MSCSS) under seismic excitation

Muhammad Moman Shahzad et al.

Summary: A novel mega-subcontrolled structural system (MSCSS) is proposed in this research to enhance the seismic response of high-rise buildings. The new configuration with an inverted V-bracing and a mid-story isolation system demonstrates significant improvement in structural acceleration response and stable characteristics under various seismic waves.

STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS (2022)

Add to Collection

Article Construction & Building Technology

Fragility analysis and collapse margin capacity assessment of mega-sub controlled structure system under the excitation of mainshock-aftershock sequence

Xinwei Wang et al.

Summary: This study investigates the vulnerability and fragility curve of the mega-sub controlled structure system (MSCSS) during the mainshock-aftershock sequence using the incremental dynamic analysis approach. The study also explores the effect of aftershock intensity on the structural fragility curve and the possibility of exceeding each limit state. Findings show that adding lead rubber bearings (LRB) to the additional column improves the seismic resistance of MSCSS.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Mathematics, Applied

Reliability-Based Design Optimization of Structures Considering Uncertainties of Earthquakes Based on Efficient Gaussian Process Regression Metamodeling

Yanjie Xiao et al.

Summary: An efficient reliability-based design optimization (RBDO) method, based on adaptive Gaussian process regression (GPR) metamodeling, is proposed in this study to reduce the computational burden and effectively consider the uncertainties of ground motions and structural parameters. The method uses a GPR model to approximate the engineering demand parameter (EDP) and an active learning strategy to update the design of experiments (DoE) of this metamodel. The reliability of design variables is calculated using Monte Carlo simulation (MCS), and an optimal solution is obtained using an efficient global optimization (EGO) algorithm. The developed method is validated and compared with existing methods by applying it to the optimization problems of a steel frame and a reinforced concrete frame. The results demonstrate that the method can provide accurate reliability information for seismic design and can handle the problems of minimizing costs under the probabilistic constraint and improving seismic reliability under limited costs.

AXIOMS (2022)

Add to Collection

Article Engineering, Civil

Robust design of offshore jacket platform structure under random wave in dual response surface framework

Gaurav Datta et al.

Summary: This paper introduces a new RDO approach based on CDF, which avoids direct MCS and reduces computational time, while using adaptive moving least-squares method to construct response surfaces. The method demonstrates more accurate and robust solutions for offshore jacket platform design optimization under random wave force.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

A dual response surface-based efficient fragility analysis approach of offshore structures under random wave load

Swagato Majumder et al.

Summary: This study introduces an efficient fragility analysis method based on cumulative distribution function matching, reducing computational time significantly while suitable for analyzing uncertainty parameters of offshore structures. The accuracy is maintained by utilizing the moving least-squares method, leading to more precise solutions compared to traditional methods, as demonstrated by examples to showcase its efficiency.

APPLIED MATHEMATICAL MODELLING (2021)

Add to Collection

Article Engineering, Industrial

A variable and mode sensitivity analysis method for structural system using a novel active learning Kriging model

Qing Guo et al.

Summary: The new method combines active learning Kriging model with system importance sampling density function to effectively deal with small probability events and multiple most probable point problems, and estimate system failure probability and sensitivity indices without calling additional performance functions.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Acoustics

Seismic Fragility Analysis of Structures Based on Adaptive Gaussian Process Regression Metamodel

Yanjie Xiao et al.

Summary: This study proposes a metamodeling method using GPR and AL for seismic fragility analysis, which can improve analysis efficiency and ensure the accuracy of fragility curves by improving the metamodel through adaptive sampling.

SHOCK AND VIBRATION (2021)

Add to Collection

Article Engineering, Civil

A metamodeling-based robust optimisation approach for structures subjected to random underground blast excitation

Gaurav Datta et al.

Summary: The study proposes a computationally efficient robust optimization (RO) approach for blast-excited structures, addressing important uncertainty-related design issues. The results show that the method has high computational efficiency and good adaptability to high uncertainty levels associated with extreme blast loads.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Hybrid multi-objective robust design optimization of a truck cab considering fatigue life

Na Qiu et al.

Summary: Optimizing fatigue performance while considering uncertainties of design variables is crucial in real-life applications. This paper introduces a hybrid multi-objective robust design optimization methodology, utilizing the Taguchi robust parametric design technique, comparison of dual surrogate models, and multi-objective particle swarm optimization algorithm to achieve improved fatigue life and reduced mass in truck cab design. The results show that the optimized design is less sensitive to uncertainty and different optimum designs can be obtained based on normalization techniques and MCDM methods from the same Pareto front.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Substructure design optimization and nonlinear responses control analysis of the mega-sub controlled structural system (MSCSS) under earthquake action

Mustapha Abdulhadi et al.

Summary: The study investigated the control performance of the newly proposed mega sub-controlled structure system under earthquake excitation and provided analytical guidelines for selecting control parameters for the structure.

EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION (2021)

Add to Collection

Article Construction & Building Technology

Seismic performance assessment of steel frame structures equipped with buckling-restrained slotted steel plate shear walls

Shuangshuang Jin et al.

Summary: This paper investigates the seismic performance of steel frame-SPSW system subjected to near-fault ground motions. Nonlinear time-history analysis and incremental dynamic analysis were used to evaluate the seismic behavior and collapse probabilities of the structures, providing significant insights into the effectiveness of SPSW models.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Engineering, Civil

Seismic behavior of MSCSS based on story drift and failure path

Buqiao Fan et al.

Summary: Through combining the structural failure path, a new comprehensive indicator is proposed to more accurately describe the behavior of structures under seismic loads, assisting in seismic design and optimization.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Seismic analysis of the tuned-inerter-damper enhanced mega-sub structure system

Qigang Liang et al.

Summary: This study investigates the seismic control of the MSSS using tuned inerter damper (TID) and compares it with other control strategies. The effectiveness of the TID is verified through analysis of a multistorey MSSS, showing its performance is better than viscous damper (VD) and tuned mass damper (TMD) within the recommended working scope.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

Add to Collection

Article Geochemistry & Geophysics

Design, Optimization and Nonlinear Response Control Analysis of the Mega Sub-Controlled Structural System (MSCSS) Under Earthquake Action

Mustapha Abdulhadi et al.

JOURNAL OF EARTHQUAKE AND TSUNAMI (2020)

Add to Collection

Article Engineering, Geological

An improved response surface method for fragility analysis of base-isolated structures considering the correlation of seismic demands on structural components

Yan Xiao et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2020)

Add to Collection

Article Geochemistry & Geophysics

Evaluation of Seismic Fragility Analysis of the Mega Sub-Controlled Structural System (MSCSS)

Mustapha Abdulhadi et al.

JOURNAL OF EARTHQUAKE AND TSUNAMI (2020)

Add to Collection

Article Construction & Building Technology

Shaking table model test of a mega-frame with a vibration control substructure

Qing Jiang et al.

STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Efficient reliability-based robust design optimization of structures under extreme wind in dual response surface framework

Gaurav Datta et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)

Add to Collection

Article Engineering, Civil

Gaussian process regression for seismic fragility assessment of building portfolios

Roberto Gentile et al.

STRUCTURAL SAFETY (2020)

Add to Collection

Article Engineering, Civil

Seismic Vulnerability Analysis of RC Bridges Based on Kriging Model

Yuye Zhang et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Improved resonance reliability and global sensitivity analysis of multi-span pipes conveying fluid based on active learning Kriging model

Qing Guo et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Multi-objective robust design optimization of fatigue life for a welded box girder

Yaozhong Wu et al.

ENGINEERING OPTIMIZATION (2018)

Add to Collection

Article Engineering, Civil

Model Updating in Complex Bridge Structures using Kriging Model Ensemble with Genetic Algorithm

Shiqiang Qin et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2018)

Add to Collection

Article Physics, Multidisciplinary

Global Optimization Employing Gaussian Process-Based Bayesian Surrogates

Roland Preuss et al.

ENTROPY (2018)

Add to Collection

Article Engineering, Civil

Wind-induced vibration control of super-tall buildings using a new combined structural system

Houshyar Eimani Kalehsar et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2018)

Add to Collection

Article Engineering, Multidisciplinary

Assessment of Structure-Specific Fargility Curves for Soft Storey Buldings Implementing IDA and SPO Approaches

F. Mohamed Nazri et al.

INTERNATIONAL JOURNAL OF ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

Reliability-based optimal design of nonlinear viscous dampers for the seismic protection of structural systems

Domenico Altieri et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

Effect of the damper property variability on the seismic reliability of linear systems equipped with viscous dampers

Andrea Dall'Asta et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Effects of structural uncertainties on seismic performance of steel moment resisting frames

Behrouz Asgarian et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2016)

Add to Collection

Article Engineering, Mechanical

Uncertainty quantification and seismic fragility of base-isolated liquid storage tanks using response surface models

Sandip Kumar Saha et al.

PROBABILISTIC ENGINEERING MECHANICS (2016)

Add to Collection

Article Engineering, Industrial

Multiobjective robust design optimization of fatigue life for a truck cab

Jianguang Fang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Add to Collection

Article Nuclear Science & Technology

The numerical computation of seismic fragility of base-isolated Nuclear Power Plants buildings

Federico Perotti et al.

NUCLEAR ENGINEERING AND DESIGN (2013)

Add to Collection

Article Engineering, Civil

Vibration control parameters investigation of the Mega-Sub Controlled Structure System (MSCSS)

Toi Limazie et al.

EARTHQUAKES AND STRUCTURES (2013)

Add to Collection

Article Construction & Building Technology

Probabilistic Push-Over Analysis of Structural and Soil-Structure Systems

M. Barbato et al.

JOURNAL OF STRUCTURAL ENGINEERING (2010)

Add to Collection

Article Engineering, Civil

A New Proposed Passive Mega-Sub Controlled Structure and Response Control

Xun'an Zhang et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2009)

Add to Collection

Article Engineering, Civil

Study on semi-active control of mega-sub controlled structure by MR damper subject to random wind loads

Qin Xiangjun et al.

EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION (2008)

Add to Collection

Article Engineering, Civil

Variability in inelastic displacement demands: Uncertainty in system parameters versus randomness in ground records

S. S. F. Mehanny et al.

ENGINEERING STRUCTURES (2008)

Add to Collection

Article Engineering, Civil

Sensitivity of building loss estimates to major uncertain variables

KA Porter et al.

EARTHQUAKE SPECTRA (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.