☆ 4.8 Review

The high open-circuit voltage of perovskite solar cells: a review

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Phenethylamine-Based Interfacial Dipole Engineering for High Voc Triple-Cation Perovskite Solar Cells

Gyu Min Kim et al.

Summary: Surface modification of 3D hybrid perovskites using 2D perovskites like PEAX enhances the power conversion efficiency and stability of perovskite solar cells. The alignment of PEAX as dipoles between perovskite and HTL results in an energy level shift, leading to improved device performance.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

A Key 2D Intermediate Phase for Stable High-Efficiency CsPbI2Br Perovskite Solar Cells

Shaomin Yang et al.

Summary: In this study, a low-dimensional intermediate-assisted growth (LDIAG) method was developed to deposit high-quality and stable CsPbI2Br film in ambient atmosphere by introducing imidazole halide (IMX) to control nucleation and growth kinetics. The solar cell efficiency was improved to 17.26% using this method, showcasing potential for high-performance inorganic perovskite solar cells formed under ambient conditions.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Efficient and Stable Large Bandgap MAPbBr3 Perovskite Solar Cell Attaining an Open Circuit Voltage of 1.65 V

Hongwei Zhu et al.

Summary: In this study, we demonstrate the preparation of high-quality MAPbBr(3) perovskite films through methylamine vapor treatment and neopentylammonium chloride passivation. The methylamine treatment effectively smooths the perovskite surface, while the neopentylammonium chloride passivation eliminates surface defects and improves the stability of the perovskite solar cell. Our results show unprecedented performance and stability in mesoporous single junction PSCs.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Tin-Lead Perovskite Solar Cells Fabricated on Hole Selective Monolayers

Gaurav Kapil et al.

Summary: According to research, the power conversion efficiency of tin-lead perovskite solar cells can be improved by using specific hole transport layers. By using substances such as 2PACz and MPA, comparable performance to traditional PEDOT:PSS can be achieved. Experimental results showed that coabsorption of 2PACz and MPA on the transparent conducting oxide layer can further enhance the performance of tin-lead perovskite solar cells.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Stable α-FAPbI3 in Inverted Perovskite Solar Cells with Efficiency Exceeding 22% via a Self-Passivation Strategy

Diwei Zhang et al.

Summary: The deposition of FAPbI(3) films assisted by methylamine chloride shows promising photovoltaic performance in inverted-structured solar cells. The addition of excess PbI2 effectively reduces charge trap densities and prolongs carrier lifetimes. By optimization, a remarkable power conversion efficiency of 22.13% has been achieved, with excellent long-term stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Excess PbI2 evolution for triple-cation based perovskite solar cells with 21.9% efficiency

Zhu Ma et al.

Summary: CsFAMA mixed perovskites show increased power conversion efficiency over time, with PbI2 playing a role in defect passivation in the perovskite film. The study explores the relationship between enhanced device performance, excess PbI2, and PbI2 evolution in triple cation perovskite films.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Tin perovskite solar cells with >1,300 h of operational stability in N2 through a synergistic chemical engineering approach

Jesus Sanchez-Diaz et al.

Summary: A chemical engineering approach using Dipropylammonium iodide and sodium borohydride as additives is reported to effectively prevent the premature degradation of Sn-HPs. The method allows for obtaining high efficiency and enhanced stability, with 96% of the initial PCE maintained after 1300 hours in N-2.

JOULE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Bandgap Organic Bulk-Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells

Shengfan Wu et al.

Summary: Lead halide perovskite and organic solar cells are seen as promising candidates for clean energy applications, but improvements are needed in the near-infrared photon loss and photovoltage deficit. By integrating low-bandgap organic bulk-heterojunction layers into inverted PSCs, high-performance hybrid solar cells can be constructed. These hybrid solar cells demonstrate excellent power conversion efficiency, extended photoresponse, and superior long-term stability compared to single-component PSCs and OSCs. With the highest efficiency reported for flexible solar cells to date, flexible HSCs can be integrated as a power source for wearable sensors, demonstrating real-time temperature monitoring capabilities.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Over 23% power conversion efficiency of planar perovskite solar cells via bulk heterojunction design

Shuzhang Yang et al.

Summary: This study introduces a new multifunctional double perovskite material Cs2PtI6 as a grain boundary modifier of organic-inorganic hybrid perovskite films, leading to improved performance of solar cells with a power conversion efficiency of 23.56%. Additionally, the unencapsulated devices show less than 10% degradation after storage at ambient humidity for 2000 hours.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Multidisciplinary Sciences

Anomalous collapses of Nares Strait ice arches leads to enhanced export of Arctic sea ice

G. W. K. Moore et al.

Summary: Ice arches at the northern and southern ends of Nares Strait, a key passage in the Arctic, are forming for shorter durations, leading to increased ice transport and accelerating the export of multi-year ice.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

High-effective SnO2-based perovskite solar cells by multifunctional molecular additive engineering

Chunyan Wang et al.

Summary: The study utilized SnO2 as the electron transport layer and incorporated FTPS molecule as an additive, resulting in the fabrication of a high-effective planar perovskite solar cell with improved electron transport and reduced defects and non-radiative recombination, achieving high efficiency and stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Surface Engineering of Ambient-Air-Processed Cesium Lead Triiodide Layers for Efficient Solar Cells

So Me Yoon et al.

Summary: Cesium lead triiodide (CsPbI3) has a desirable band gap and high thermal stability, but its power conversion efficiency (PCE) is lower than that of organic cation-based halide perovskites with identical band gaps. The PCE of CsPbI3 solar cells is mainly governed by the surface morphology and defect passivation of its thin films.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dual Additive for Simultaneous Improvement of Photovoltaic Performance and Stability of Perovskite Solar Cell

In Seok Yang et al.

Summary: Additive engineering is an efficient approach for improving photovoltaic performance and phase stability of formamidinium-based perovskite, with a dual additive strategy of mixing MACl and CsCl proving successful in enhancing open-circuit voltage Voc, reducing trap density, and increasing resistance against charge recombination. The best power conversion efficiency achieved with the dual additive is 23.22%, outperforming single additive strategies using MACl or CsCl.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Rubidium Fluoride Modified SnO2 for Planar n-i-p Perovskite Solar Cells

Jing Zhuang et al.

Summary: Regulating the electron transport layer (ETL) using the cost-effective modification material rubidium fluoride (RbF) can enhance the electron mobility of SnO2 and suppress hysteresis in perovskite solar cells (PSCs). Double-sided passivated PSCs with RbF on the SnO2 surface and p-methoxyphenethylammonium iodide on the perovskite surface achieved an outstanding PCE result with a small V-oc deficit.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Chlorophyll Derivative-Sensitized TiO2 Electron Transport Layer for Record Efficiency of Cs2AgBiBr6 Double Perovskite Solar Cells

Baoning Wang et al.

Summary: In this study, a carboxy-chlorophyll derivative (C-Chl) was introduced as a sensitizer to enhance the performance of Cs2AgBiBr6-based perovskite solar cells. The optimized device achieved a significantly improved power conversion efficiency (PCE) exceeding 3% for the first time, with enhanced short-circuit current density and improved stability. The introduction of C-Chl was found to reduce defects, accelerate electron extraction, and suppress charge recombination at the interface, leading to the enhanced overall performance of the solar cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Selective Defect Passivation and Topographical Control of 4-Dimethylaminopyridine at Grain Boundary for Efficient and Stable Planar Perovskite Solar Cells

Seulki Song et al.

Summary: The introduction of DMAP in perovskite solar cells has been shown to improve device efficiency and stability by modifying grain boundaries and enhancing adhesion strength between materials.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Reversible Pb2+/Pb0 and I-/I3- Redox Chemistry Drives the Light-Induced Phase Segregation in All-Inorganic Mixed Halide Perovskites

Lyubov A. Frolova et al.

Summary: Research shows that tunability of optoelectronic properties of lead halide perovskites can be achieved through halide mixing, but mixed halide perovskites are unstable under illumination due to halide phase segregation. Recent studies have found that iodoplumbate is selectively expelled from mixed halide perovskite grains, forming a separate I-rich phase, and proposed a mechanism based on reversible redox chemistry to explain this phenomenon.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Implementing Dopant-Free Hole-Transporting Layers and Metal-Incorporated CsPbI2Br for Stable All-Inorganic Perovskite Solar Cells

Sawanta S. Mali et al.

Summary: A new method utilizing hot-air-assisted perovskite deposition and dopant-free hole-transporting materials has been used to improve the efficiency and stability of CsPbI2Br perovskite solar cells. Metal cation doping and dopant-free hole transporting layers have led to record-high power conversion efficiencies and excellent long-term stability.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Energy & Fuels

p-Type Dopants As Dual Function Interfacial Layer for Efficient and Stable Tin Perovskite Solar Cells

Yuhui Chen et al.

Summary: The research successfully modified the heterointerface between the perovskite active layer and the hole transport layer (HTL) by depositing a p-type dopant, tetrafluoro-tetracyanoquinodimethane (F4TCNQ), on the commonly used poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) HTL. The interfacial layer introduced a passivated contact and suppressed trap density at the HTL/perovskite interface through halogen bonding, leading to an improved efficiency and stability of the inverted tin perovskite solar cells (TPSC).

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Physical

Vertical 2D/3D Heterojunction of Tin Perovskites for Highly Efficient HTM-Free Perovskite Solar Cell

Jin-Tai Lin et al.

Summary: This study presents a novel p-n junction configuration in the light-absorbing layer of tin perovskite solar cells, leading to a significant performance enhancement for HTM-free Sn PSCs, achieving high power conversion efficiency and excellent long-term stability.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Drastic Change of Surface Morphology of Cesium-Formamidinium Perovskite Solar Cells by Antisolvent Processing

Youhei Numata et al.

Summary: The study demonstrates the superior performance of di-iso-propyl ether as an antisolvent for MA-free formamidinium-Cs perovskites, proposing better efficiency and longer shelf life compared to conventional chlorobenzene treatment. Additionally, the introduction of DIE treatment in the FAPbI(3)(CsPbBr3)-based PSCs resulted in enhanced fill factor and overall performance.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

One-Source Strategy Boosting Dopant-Free Hole Transporting Layers for Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells

Xinqi Li et al.

Summary: A one-source strategy using the same polymer donor material is proposed to simultaneously dope CsPbI2Br perovskite films and fabricate the hole transport layer, leading to improved film quality and enhanced device performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

In-Situ Hot Oxygen Cleansing and Passivation for All-Inorganic Perovskite Solar Cells Deposited in Ambient to Breakthrough 19% Efficiency

Kang Wang et al.

Summary: The all-inorganic perovskite CsPbI3 has excellent thermal and chemical stability but suffers from large energy losses due to point defects. A hot oxygen cleansing with superior passivation (HOCP) was demonstrated to reduce E-loss, improve PCE, and enhance long-term stability. This approach could pave the way for reducing nonradiative charge recombination losses in high-performance inorganic perovskite photoelectronics.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Making Room for Growing Oriented FASnI3 with Large Grains via Cold Precursor Solution

Danyu Cui et al.

Summary: The use of cold precursor solution to control the crystallization process of tin perovskite solar cells results in highly oriented films with larger grains, leading to an increase in open-circuit voltage and overall power conversion efficiency.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient (>20 %) and Stable All-Inorganic Cesium Lead Triiodide Solar Cell Enabled by Thiocyanate Molten Salts

Bingcheng Yu et al.

Summary: By developing a UAT molten salt modification strategy, high-quality CsPbI3 films have been successfully deposited with significantly improved crystal quality, leading to a cell efficiency of over 20% and excellent stability over 1000 hours. These results demonstrate a promising development route for CsPbI3-related photoelectric devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Optics

Room-temperature multiple ligands-tailored SnO2 quantum dots endow in situ dual-interface binding for upscaling efficient perovskite photovoltaics with high VOC

Zhiwei Ren et al.

Summary: Introduction of novel tin oxide quantum dots as electron transporting layers in planar perovskite solar cells has led to improved interface control and prolonged charge carrier lifetime, resulting in significantly enhanced power conversion efficiency.

LIGHT-SCIENCE & APPLICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Defect Tolerance of Mixed B-Site Organic-Inorganic Halide Perovskites

Jian Xu et al.

Summary: This study reveals that B-site alloying in organic-inorganic halide perovskites results in defect behaviors distinct from pure OIHPs, with a defect-tolerant region identified in mixed Pb-Sn perovskites. Experimental observations show longer carrier lifetimes in 50% Sn mixed perovskite films, suggesting potential for improved photovoltaic performance through strategic alloying strategies.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

23.7% Efficient inverted perovskite solar cells by dual interfacial modification

Matteo Degani et al.

Summary: This study presents a dual interfacial modification approach by incorporating large organic cations at both the bottom and top interfaces of the perovskite active layer, leading to simultaneous improvement in both open-circuit voltage and fill factor of the devices, reaching a champion device efficiency of 23.7%. This dual interfacial modification is fully compatible with bulk modification of the perovskite active layer by ionic liquids, resulting in efficient and stable inverted architecture devices.

SCIENCE ADVANCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Single- or double A-site cations in A3Bi2I9 bismuth perovskites: What is the suitable choice?

Feray Unlu et al.

Summary: This study demonstrates for the first time that double-cation based bismuth perovskite materials can reduce the bandgap and improve device efficiency, especially when partially replacing MA(+), resulting in up to a 1.5% increase in device power conversion efficiency (PCE). This opens up possibilities for compositional engineering for enhanced device performance.

JOURNAL OF MATERIALS RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Effect of binary additives in mixed 2D/3D Sn-based perovskite solar cells

Sanjay Sandhu et al.

Summary: The optimal blend of 8 mol% PEAI and 1 mol% EDAI(2) produces a pinhole-free, compact perovskite film with enhanced crystallinity, preferred orientation, low background charge carrier density, reduced trap states, and suppressed recombination losses. This combination improves interlayer coupling for better charge transfer at interfaces, leading to a record power conversion efficiency of 8.47% and enhanced stability of up to 5 days in ambient conditions without additional encapsulation.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

An efficient and hydrophobic molecular doping in perovskite solar cells

Junsheng Luo et al.

Summary: A novel dopant of fluorinated iron(III) porphine was reported as a potential alternative to the current state-of-the-art bi-dopants Li-TFSI/t-BP in perovskite solar cells. The optimized PSCs showed improved power conversion efficiency and long-term stability, offering a promising solution to the longevity challenge in perovskite photovoltaics.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Mesoscopic TiO2/Nb2O5 Electron Transfer Layer for Efficient and Stable Perovskite Solar Cells

Rohit D. Chavan et al.

Summary: Surface modification of mesoporous TiO2 layer with ultrathin Nb2O5 layer deposited by ALD technique improves the performance and stability of perovskite solar cells by enhancing optoelectronic properties, morphology of perovskite films, charge transfer, and reducing interfacial recombination. This results in increased power conversion efficiency, open-circuit voltage, negligible hysteresis, and enhanced shelf life thermal and UV stabilities of the device.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

High-Efficiency (>14%) and Air-Stable Carbon-Based, All-Inorganic CsPbI2Br Perovskite Solar Cells through a Top-Seeded Growth Strategy

Weidong Zhu et al.

Summary: The use of top-seeded solution growth technique in preparing CsPbI2Br films enhances their quality and stability, resulting in improved efficiency and stability of carbon-based, all-inorganic perovskite solar cells.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Energy & Fuels

Stabilization of formamidinium lead triiodide α-phase with isopropylammonium chloride for perovskite solar cells

Byung-wook Park et al.

Summary: The study shows that using isopropylammonium to stabilize the perovskite structure greatly improves the long-term stability of solar cells, leading to enhanced efficiency performance.

NATURE ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Lead-free tin perovskite solar cells

Tianhao Wu et al.

Summary: Efficient and stable development of lead-free perovskite solar cells (PSCs) using tin as a promising candidate for high-performance, eco-friendly photovoltaic technology has been reviewed. Approaches toward efficiency improvement and challenges in reaching higher PCE and scalable production for tin PSCs have been discussed in this paper with the goal of accelerating their commercialization.

JOULE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Formamidine Acetate Induces Regulation of Crystallization and Stabilization in Sn-Based Perovskite Solar Cells

Ruoyao Xu et al.

Summary: By introducing FAAc, we successfully developed a strategy for the formation of high-quality films in Sn-based PSCs, achieving improved device performance and maintaining 82% of the initial efficiency in a light aging test.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Band Matching Strategy for All-Inorganic Cs2AgBiBr6 Double Perovskite Solar Cells with High Photovoltage

Bo Xiao et al.

Summary: The study demonstrates that lead-free double perovskite is a promising alternative to address the stability and toxicity issues of lead-based organic-inorganic hybrid perovskite solar cells. High-quality double perovskite films were prepared using a new method, and a low-cost and eco-friendly Cu2O film was successfully prepared for the first time through vacuum vapor deposition.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Stiffening the Pb-X Framework through a π-Conjugated Small-Molecule Cross-Linker for High-Performance Inorganic CsPbI2Br Perovskite Solar Cells

Hui Li et al.

Summary: The use of 4-GBACl small molecules effectively stabilizes CsPbI2Br perovskites, inhibits ion migration and charge trapping/recombination centers, and enhances the efficiency of solar cells.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant-Free Polymer HTM-Based CsPbI2Br Solar Cells with Efficiency Over 17% in Sunlight and 34% in Indoor Light

Zhanglin Guo et al.

Summary: A new polymer, PDTDT, has been developed as a dopant-free hole-transporting material for CsPbI2Br solar cells, which shows high efficiency and stability, making it a potential alternative to popular doped Spiro-OMeTAD and P3HT HTM.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Uniform Stepped Interfacial Energy Level Structure Boosts Efficiency and Stability of CsPbI2Br Solar Cells

Yu-Xin Luo et al.

Summary: This study demonstrates the improvement of CsPbI2Br perovskite solar cells by inserting multicarbazolyl-substituted benzonitrile at the interface between CsPbI2Br and the hole-transporting layer. This modification effectively reduces energy loss, boosts hole extraction, and enhances device performance, resulting in a high power conversion efficiency of 17.34%. The tert-butyl groups in the compound also improve the moisture-resistance of CsPbI2Br PSCs, making the unencapsulated device maintain over 75% of its initial efficiency after 700 hours of storage in air.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant Engineering for Spiro-OMeTAD Hole-Transporting Materials towards Efficient Perovskite Solar Cells

Ji-Youn Seo et al.

Summary: This study analyzed the effect of different metal cations on doping spiro-OMeTAD in hybrid perovskite solar cells, revealing the superior performance of Zn(TFSI)(2) salts compared to others. This provides new design principles for dopant engineering in HTMs for hybrid perovskite photovoltaics.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Heterogeneous 2D/3D Tin-Halides Perovskite Solar Cells with Certified Conversion Efficiency Breaking 14%

Bin-Bin Yu et al.

Summary: By modulating the microstructure of 2D/3D heterogeneous tin-perovskite absorber films through substituting FAI with FPEABr, the oxidation of Sn2+ to Sn4+ and defect density were effectively suppressed, leading to a remarkable increase in conversion efficiency from 9.38% to 14.81%.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Antisolvent Engineering to Optimize Grain Crystallinity and Hole-Blocking Capability of Perovskite Films for High-Performance Photovoltaics

Yulan Huang et al.

Summary: By incorporating the n-type semiconductor TPBi into the antisolvent, this study successfully regulated the grain growth and charge transport of perovskite films, leading to a significant improvement in the performance of inverted perovskite solar cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fluoride Chemistry in Tin Halide Perovskites

Jorge Pascual et al.

Summary: Fluoride plays a key role in preventing the formation of Sn-IV in perovskite solar cells by selectively forming SnF4 complexes. Additionally, fluoride directly influences the colloidal chemistry of precursor dispersions, thereby affecting perovskite crystallization.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Can Vacuum Deposition Apply to Bismuth-Doped γ-CsPbI3 Perovskite? Revealing the Role of Bi3+ in the Formation of Black Phase

Chenggang Yang et al.

Summary: This study aims to achieve low-temperature black phase transition using heterovalent doped CsPb1-xBixI3 and further explores the feasibility of doping Bi3+ through vacuum deposition. However, the coevaporated films are mainly composed of another hexagonal perovskite phase and fail to reduce the black phase transition temperature.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

One-Step Synthesis of SnI2•(DMSO)x Adducts for High-Performance Tin Perovskite Solar Cells

Xianyuan Jiang et al.

Summary: This study improved the electron diffusion length and structural homogeneity of tin halide perovskite materials using a synthetic route, resulting in solar cells with a power conversion efficiency of 14.6%.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Energy & Fuels

Magnesium acetate additive enables efficient and stable carbon electrode based CsPbI2Br perovskite solar cells

Kunming Zhang et al.

Summary: A small amount of magnesium acetate was introduced into the CsPbI2Br precursor solution, leading to improved crystallinity and defect passivation, resulting in an increased power conversion efficiency of HTM-free devices from 10.84% to 13.08%.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Ionic Liquid Stabilizing High-Efficiency Tin Halide Perovskite Solar Cells

Guixiang Li et al.

Summary: The use of n-butylammonium acetate (BAAc) to modulate tin coordination in the crystallization process results in more compact and preferentially oriented perovskite films. Perovskite solar cells processed with BAAc show higher power conversion efficiency and improved stability, paving the way for controlled tin-based perovskite crystallization in lead-free photovoltaics.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The Bottlenecks of Cs2AgBiBr6 Solar Cells: How Contacts and Slow Transients Limit the Performance

Maximilian T. Sirtl et al.

Summary: Performance of Cs2AgBiBr6-based solar cells is limited by ionic conductivity and poor energy level alignment, resulting in fluctuations of photovoltaic parameters and radiative losses, which can be overcome by optimizing the solar cell structure.

ADVANCED OPTICAL MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Secondary crystallization strategy for highly efficient inorganic CsPbI2Br perovskite solar cells with efficiency approaching 17%

Jing Ma et al.

Summary: The utilization of secondary crystallization strategy has improved the performance and stability of CsPbI2Br perovskite solar cells in a facile n-i-p structure, achieving a high open-circuit voltage and power conversion efficiency.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Composition engineering of operationally stable CsPbI2Br perovskite solar cells with a record efficiency over 17%

Teoman Ozturk et al.

Summary: The study presents a method of tuning CsPbI2Br crystallization by incorporating FeCl2 into the perovskite precursor. The introduction of FeCl2 stabilizes the crystal phase, improves efficiency and stability of the photovoltaic devices.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Humidity-Assisted Chlorination with Solid Protection Strategy for Efficient Air-Fabricated Inverted CsPbI3 Perovskite Solar Cells

Sheng Fu et al.

Summary: Humidity-assisted chlorination with solid protection via Si-Cl incorporation is effective for reducing moisture erosion during deposition of CsPbI3 perovskite solar cells in air. The solid protection from Si-OH helps improve the crystallization and phase stability of CsPbI3, resulting in high efficiency and moisture tolerance.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Energy & Fuels

A unified description of non-radiative voltage losses in organic solar cells

Xian-Kai Chen et al.

Summary: Researchers provide a general description of non-radiative voltage losses and find that the latest organic solar cells based on non-fullerene acceptors can reduce this loss. The study shows that photoluminescence yield is a critical factor in determining the lower limit of non-radiative voltage losses.

NATURE ENERGY (2021)

Add to Collection

Article Energy & Fuels

Surface Management for Carbon-Based CsPbI2Br Perovskite Solar Cell with 14% Power Conversion Efficiency

Fengyang Yu et al.

Summary: In this study, the use of BMIMBF4 successfully addressed the energy-level mismatch issue between CsPbI2Br and carbon electrodes, resulting in improved power conversion efficiency of C-PSCs and enhanced stability.

SOLAR RRL (2021)

Add to Collection

Article Energy & Fuels

Concerted Ion Migration and Diffusion-Induced Degradation in Lead-Free Ag3BiI6 Rudorffite Solar Cells under Ambient Conditions

Ashish Kulkarni et al.

Summary: This study investigates the ion migration behavior of silver bismuth iodide (SBI) materials and its impact on material/device stability. It is found that antisolvent-processed Ag3BiI6 thin films exhibit fast ion migration, requiring protection by thickening the hole transport layer (HTL). The understanding of this new mechanism highlights the importance of SBI material composition and fundamental mechanisms for better solar cell design and utilization of ion migration behavior in optoelectronics.

SOLAR RRL (2021)

Add to Collection

Article Energy & Fuels

Multifunctional Molecule Engineered SnO2 for Perovskite Solar Cells with High Efficiency and Reduced Lead Leakage

Jiali Zhang et al.

Summary: By mixing amino trimethylene phosphonic acid and KOH, the performance of the electron transport layer in perovskite solar cells has been significantly improved, leading to a higher power conversion efficiency. The modified cells also show better efficiency and stability in perovskite/silicon heterojunction tandem solar cells.

SOLAR RRL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Formation of CsPbI3 γ-Phase at 80°C by Europium-Assisted Snowplow Effect

Alessandra Alberti et al.

Summary: This study reveals a dual beneficial role of Eu in the formation of the γ-phase of CsPbI3 perovskite, as well as presents a method for stabilizing PSK-CsPbI3 layers based on a self-generated thin frame of exceeding material.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Sensitivity of mixed cation/halide perovskites to evaporation kinetics of DMSO at an early stage

Gyu Min Kim et al.

Summary: The evaporation kinetics of lead-based organic-inorganic hybrid perovskite precursors strongly depend on the compositions and ratios of cations and halides, with only certain compositions exhibiting a strong dependence on EKP. By briefly examining the compositions of wet films, it is possible to determine their sensitivity to EKP and reduce the standard deviation of performance to achieve high power conversion efficiencies for lead-based OIHPs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

All-inorganic halide perovskites as candidates for efficient solar cells

Xie Zhang et al.

Summary: Hybrid perovskites exhibit higher efficiencies than all-inorganic counterparts in photovoltaic applications, but organic cations can introduce more nonradiative recombination centers that affect performance. All-inorganic halide perovskites have better stability of the perovskite phase and hold promise for high-efficiency optoelectronic applications. These critical insights may prevent all-inorganic halide perovskites from being disregarded as potentially strong candidates for solar cell materials.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Nanoscale interfacial engineering enables highly stable and efficient perovskite photovoltaics

Anurag Krishna et al.

Summary: A molecular-level interface engineering strategy using a multifunctional ligand 2,5-thiophenedicarboxylic acid is presented to enhance the long-term operational and thermal stability of perovskite solar cells (PSCs). The solar cells achieved high operational stability and stabilized power conversion efficiency over 23% after prolonged testing, with insights into the modulation of grain boundaries, local density of states, surface bandgap, and interfacial recombination. Chemical analysis revealed that molecular passivation suppresses interfacial ion diffusion and inhibits irreversible degradation of perovskite, suggesting potential for expedited development of stable PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

A review on the stability of inorganic metal halide perovskites: challenges and opportunities for stable solar cells

Wanchun Xiang et al.

Summary: Inorganic perovskite based solar cells have garnered global attention for their high thermal stability and theoretical power conversion efficiencies. However, their poorer phase stability compared to hybrid counterparts requires further research. This review summarizes the progress in stability research on inorganic perovskites, focusing on degradation mechanisms towards temperature, moisture, and oxygen.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Passivation and process engineering approaches of halide perovskite films for high efficiency and stability perovskite solar cells

Abd. Rashid bin Mohd Yusoff et al.

Summary: The surface, interfaces, and grain boundaries of halide perovskite films play critical roles in achieving and maintaining high solar cell performance. Various defect engineering approaches are utilized to improve the efficiency and stability of perovskite solar cells, with a focus on passivating materials and process engineering techniques.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Zinc ion functional doping for all-inorganic planar CsPbIBr2 perovskite solar cells with efficiency over 10.5%

Yongjin Long et al.

Summary: Doping CsPbIBr2 perovskite with ZnBr2 can improve the crystallinity and morphology, optimize energy level alignment, and enhance the photovoltaic performance and long-term stability of the PSC, leading to a higher power conversion efficiency.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Physical

Artemisinin-passivated mixed-cation perovskite films for durable flexible perovskite solar cells with over 21% efficiency

Longkai Yang et al.

Summary: The use of artemisinin as a passivation material in flexible perovskite solar cells has significantly improved their performance by enhancing V-OC and FF, reducing nonradiative recombination, and achieving a high PCE of 21.10%. The interaction between artemisinin molecules and uncoordinated Pb2+ ions has been shown to suppress the formation of deep-level trap defects and Pb clusters, leading to excellent stability under various aging conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Lead-Free Perovskite-Inspired Absorbers for Indoor Photovoltaics

Yueheng Peng et al.

Summary: With the exponential growth of the market value and number of IoT devices, the demand for indoor photovoltaics to power autonomous devices is expected to increase. Lead-free perovskite-inspired materials have shown great potential for indoor light harvesting.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Reducing Detrimental Defects for High-Performance Metal Halide Perovskite Solar Cells

Luis K. Ono et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Energy Level Tuning for Efficient and Thermostable CsPbI2Br Perovskite Solar Cells

En-Chi Shen et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

π-Conjugated small molecules enable efficient perovskite growth and charge-extraction for high-performance photovoltaic devices

Hui Liu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Chemistry, Physical

Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells

Feng Gao et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Perovskite Solar Cells: Can We Go Organic-Free, Lead-Free, and Dopant-Free?

Tsutomu Miyasaka et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

From Pb to Bi: A Promising Family of Pb-Free Optoelectronic Materials and Devices

Cuncun Wu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Role of surface recombination in perovskite solar cells at the interface of HTL/CH3NH3PbI3

Damian Glowienka et al.

NANO ENERGY (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Solvent Engineering of a Dopant-Free Spiro-OMeTAD Hole-Transport Layer for Centimeter-Scale Perovskite Solar Cells with High Efficiency and Thermal Stability

Min Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Excellent Moisture Stability and Efficiency of Inverted All-Inorganic CsPbIBr2 Perovskite Solar Cells through Molecule Interface Engineering

Shuzhang Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled n-Doping in Air-Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%

Yu Han et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Gradient Energy Alignment Engineering for Planar Perovskite Solar Cells with Efficiency Over 23%

Pengyang Wang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Suppressing Vacancy Defects and Grain Boundaries via Ostwald Ripening for High-Performance and Stable Perovskite Solar Cells

Yuqian Yang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant-Free Organic Hole-Transporting Material for Efficient and Stable Inverted All-Inorganic and Hybrid Perovskite Solar Cells

Kui Jiang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

U1 snRNP regulates cancer cell migration and invasion in vitro

Jung-Min Oh et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

MACl-Assisted Ge Doping of Pb-Hybrid Perovskite: A Universal Route to Stabilize High Performance Perovskite Solar Cells

Gyu Min Kim et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Visualizing and Suppressing Nonradiative Losses in High Open-Circuit Voltage n-i-p-Type CsPbI3 Perovskite Solar Cells

Wei Meng et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Scalable fabrication and coating methods for perovskite solar cells and solar modules

Nam-Gyu Park et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Low-Temperature Synthesized Nb-Doped TiO2 Electron Transport Layer Enabling High-Efficiency Perovskite Solar Cells by Band Alignment Tuning

Yoshitaka Sanehira et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Device Performance with Passivation of the TiO2 Surface Using a Carboxylic Acid Fullerene Monolayer for a SnPb Perovskite Solar Cell with a Normal Planar Structure

Kengo Hamada et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Improving the Open-Circuit Voltage of Sn-Based Perovskite Solar Cells by Band Alignment at the Electron Transport Layer/Perovskite Layer Interface

Tomoyasu Yokoyama et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Component Interaction for Air-Processed Efficient and Stable All-Inorganic Perovskite Photovoltaic

Xiaojuan Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Alkaline-earth bis(trifluoromethanesulfonimide) additives for efficient and stable perovskite solar cells

Ngoc Duy Pham et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

2D-3D Cs2PbI2Cl2-CsPbI2.5Br0.5 Mixed-Dimensional Films for All-Inorganic Perovskite Solar Cells with Enhanced Efficiency and Stability

Zhenzhen Li et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Review Chemistry, Physical

Inorganic Halide Perovskite Solar Cells: Progress and Challenges

Jingjing Tian et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

High-Efficiency CsPbI2Br Perovskite Solar Cells with Dopant-Free Poly(3-hexylthiophene) Hole Transporting Layers

Li Ming-Hua et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A facile surface passivation method for efficient inorganic CsPbI2Br perovskite solar cells with efficiencies over 15%

Chen Shan-Ci et al.

SCIENCE CHINA-MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Lead(II) Propionate Additive and a Dopant-Free Polymer Hole Transport Material for CsPbI2Br Perovskite Solar Cells

Senol Oz et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Tin Halide Perovskite Films Made of Highly Oriented 2D Crystals Enable More Efficient and Stable Lead-free Perovskite Solar Cells

Meng Li et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient and Stable All-Inorganic Niobium-Incorporated CsPbI2Br-Based Perovskite Solar Cells

Jyoti Patil et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Additive-free, Cost-Effective Hole-Transporting Materials for Perovskite Solar Cells Based on Vinyl Triarylamines

Hidetaka Nishimura et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Physics, Applied

Toward high efficiency tin perovskite solar cells: A perspective

Hansheng Li et al.

APPLIED PHYSICS LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Lead-free tin-halide perovskite solar cells with 13% efficiency

Kohei Nishimura et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

High-Performance Lead-Free Solar Cells Based on Tin-Halide Perovskite Thin Films Functionalized by a Divalent Organic

Min Chen et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Large Conduction Band Energy Offset Is Critical for High Fill Factors in Inorganic Perovskite Solar Cells

Qiong Wang et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Modulation of Defects and Interfaces through Alkylammonium Interlayer for Efficient Inverted Perovskite Solar Cells

Shengfan Wu et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

Unfolding the Influence of Metal Doping on Properties of CsPbI3Perovskite

Sandeep Kajal et al.

SMALL METHODS (2020)

Add to Collection

Article Energy & Fuels

A-Site Rubidium Cation-Incorporated CsPbI2Br All-Inorganic Perovskite Solar Cells Exceeding 17% Efficiency

Jyoti V. Patil et al.

SOLAR RRL (2020)

Add to Collection

Article Energy & Fuels

A New Strategy for Increasing the Efficiency of Inverted Perovskite Solar Cells to More than 21%: High-Humidity Induced Self-Passivation of Perovskite Films

Fan Zhang et al.

SOLAR RRL (2020)

Add to Collection

Article Energy & Fuels

Efficient and Stable Tin Perovskite Solar Cells Enabled by Graded Heterostructure of Light-Absorbing Layer

Tianhao Wu et al.

SOLAR RRL (2020)

Add to Collection

Article Energy & Fuels

Photoactive Zn-Chlorophyll Hole Transporter-Sensitized Lead-Free Cs2AgBiBr6 Perovskite Solar Cells

Baoning Wang et al.

SOLAR RRL (2020)

Add to Collection

Article Energy & Fuels

Surface Passivation of All-Inorganic CsPbI2Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

Shan-Ci Chen et al.

SOLAR RRL (2020)

Add to Collection

Article Chemistry, Physical

Mn Doping of CsPbI3 Film Towards High-Efficiency Solar Cell

Zhun Yao et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Printable CsPbI3Perovskite Solar Cells with PCE of 19% via an Additive Strategy

Xiaoming Chang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Negative Capacitance and Inverted Hysteresis: Matching Features in Perovskite Solar Cells

Agustin O. Alvarez et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI2Br Perovskite Solar Cells

Pang Wang et al.

ADVANCED SCIENCE (2020)

Add to Collection

Editorial Material Chemistry, Physical

Photovoltaics Reaching for the Shockley-Queisser Limit

Bruno Ehrler et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Sn Perovskite Solar Cells via 2D/3D Bilayer Formation through a Sequential Vapor Process

Won-Gyu Choi et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing γ-CsPbI3 Perovskite via Phenylethylammonium for Efficient Solar Cells with Open-Circuit Voltage over 1.3 V

Qiufeng Ye et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

Optimal intermediate adducts regulate low-temperature CsPbI2Br crystallization for efficient inverted all-inorganic perovskite solar cells

Jinpei Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

2D Cs2PbI2Cl2 Nanosheets for Holistic Passivation of Inorganic CsPbI2Br Perovskite Solar Cells for Improved Efficiency and Stability

Shaomin Yang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Defect passivation strategies in perovskites for an enhanced photovoltaic performance

Lin Fu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Gradient band structure: high performance perovskite solar cells using poly(bisphenol A anhydride-co-1,3-phenylenediamine)

Hiroyuki Kanda et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

A critical review on bismuth and antimony halide based perovskites and their derivatives for photovoltaic applications: recent advances and challenges

Zhixin Jin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Templated growth of FASnI3 crystals for efficient tin perovskite solar cells

Xiao Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

An intermeshing electron transporting layer for efficient and stable CsPbI2Br perovskite solar cells with open circuit voltage over 1.3 V

Shuo Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Band-bending induced passivation: high performance and stable perovskite solar cells using a perhydropoly(silazane) precursor

Hiroyuki Kanda et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Dopant-free polymeric hole transport materials for efficient CsPbI2Br perovskite cells with a fill factor exceeding 84%

Pang Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluating the role of phenethylamine iodide as a novel anti-solvent for enhancing performance of inverted planar perovskite solar cells

Christos Zervos et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Revealing the origin of voltage loss in mixed-halide perovskite solar cells

Suhas Mahesh et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Causes and Solutions of Recombination in Perovskite Solar Cells

Jiangzhao Chen et al.

ADVANCED MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Composition Stoichiometry of Cs2AgBiBr6 Films for Highly Efficient Lead-Free Perovskite Solar Cells

Femi Igbari et al.

NANO LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Localized Traps Limited Recombination in Lead Bromide Perovskites

Jianhui Fu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Rapid Aqueous Spray Fabrication of Robust NiOx: A Simple and Scalable Platform for Efficient Perovskite Solar Cells

William J. Scheideler et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ionic Effect Enhances Light Emission and the Photovoltage of Methylammonium Lead Bromide Perovskite Solar Cells by Reduced Surface Recombination

Clara Aranda et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Niobium Incorporation into CsPbI2Br for Stable and Efficient All-Inorganic Perovskite Solar Cells

Zhanglin Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Defect and Contact Passivation for Perovskite Solar Cells

Erkan Aydin et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ethylenediammonium-Based Hollow Pb/Sn Perovskites with Ideal Band Gap Yield Solar Cells with Higher Efficiency and Stability

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Overcoming Zinc Oxide Interface Instability with a Methylammonium-Free Perovskite for High-Performance Solar Cells

Kelly Schutt et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Metal Cations in Efficient Perovskite Solar Cells: Progress and Perspective

Kai Wang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

On the Relation between the Open-Circuit Voltage and Quasi-Fermi Level Splitting in Efficient Perovskite Solar Cells

Pietro Caprioglio et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Interface engineering of low temperature processed all-inorganic CsPbI2Br perovskite solar cells toward PCE exceeding 14%

Long Zhou et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Strategies To Improve Performance and Stability for Tin-Based Perovskite Solar Cells

Eric Wei-Guang Diau et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

High-Efficiency and Stable Perovskite Solar Cells Prepared Using Chlorobenzene/Acetonitrile Antisolvent

Huayang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Relationship between Lattice Strain and Efficiency for Sn-Perovskite Solar Cells

Kohei Nishimura et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

SnO2-C60 Pyrrolidine Tris-Acid (CPTA) as the Electron Transport Layer for Highly Efficient and Stable Planar Sn-Based Perovskite Solar Cells

Zijiang Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Suppression of Charge Carrier Recombination in Lead-Free Tin Halide Perovskite via Lewis Base Post-treatment

Muhammad Akmal Kamarudin et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Thermodynamically stabilized β-CsPbI3-based perovskite solar cells with efficiencies >18%

Yong Wang et al.

SCIENCE (2019)

Add to Collection

Review Chemistry, Physical

Scalable Fabrication of Metal Halide Perovskite Solar Cells and Modules

Longbin Qiu et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Energy & Fuels

Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(II) oxidation in precursor ink

Renxing Lin et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Cesium Lead Inorganic Solar Cell with Efficiency beyond 18% via Reduced Charge Recombination

Qiufeng Ye et al.

ADVANCED MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Nonradiative Recombination in Perovskite Solar Cells: The Role of Interfaces

Christian M. Wolff et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant-Free Squaraine-Based Polymeric Hole-Transporting Materials with Comprehensive Passivation Effects for Efficient All-Inorganic Perovskite Solar Cells

Qi Xiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The Role of Dimethylammonium Iodide in CsPbI3 Perovskite Fabrication: Additive or Dopant?

Yong Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Hole-Boosted Cu(Cr,M)O2 Nanocrystals for All-Inorganic CsPbBr3 Perovskite Solar Cells

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

Inverted All-Inorganic CsPbI2Br Perovskite Solar Cells with Promoted Efficiency and Stability by Nickel Incorporation

Lijun Chen et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Investigation of Oxygen Passivation for High-Performance All-Inorganic Perovskite Solar Cells

Shun-Chang Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Core-Shell ZnO@SnO2 Nanoparticles for Efficient Inorganic Perovskite Solar Cells

Zhenxing Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Europium and Acetate Co-doping Strategy for Developing Stable and Efficient CsPbI2Br Perovskite Solar Cells

Shaomin Yang et al.

SMALL (2019)

Add to Collection

Article Multidisciplinary Sciences

Enhancing electron diffusion length in narrow-bandgap perovskites for efficient monolithic perovskite tandem solar cells

Zhibin Yang et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Robust Tin-Based Perovskite Solar Cells with Hybrid Organic Cations to Attain Efficiency Approaching 10%

Efat Jokar et al.

ADVANCED MATERIALS (2019)

Add to Collection

Editorial Material Chemistry, Physical

Industrial Insights into Perovskite Photovoltaics

Chris Case et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Energy & Fuels

Lead-free formamidinium bismuth perovskites (FA)(3)Bi2I9 with low bandgap for potential photovoltaic application

Chunfeng Lan et al.

SOLAR ENERGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Double-slit photoelectron interference in strong-field ionization of the neon dimer

Maksim Kunitski et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Structurally Reconstructed CsPbI2Br Perovskite for Highly Stable and Square-Centimeter All-Inorganic Perovskite Solar Cells

Chong Liu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Silver Bismuth Sulfoiodide Solar Cells: Tuning Optoelectronic Properties by Sulfide Modification for Enhanced Photovoltaic Performance

Narendra Pai et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Open-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells

Zhifa Liu et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Hole Transportation for Inverted Tin-Based Perovskite Solar Cells with High Performance and Stability

Cong Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

2D-3D heterostructure enables scalable coating of efficient low-bandgap Sn-Pb mixed perovskite solar cells

Linxiang Zeng et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Delocalized molecule surface electronic modification for enhanced performance and high environmental stability of CsPbI2Br perovskite solar cells

Zhen Wang et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Off-Stoichiometric Methylammonium Iodide Passivated Large -Grain Perovskite Film in Ambient Air for Efficient Inverted Solar Cells

Kejun Liao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Imperfections and their passivation in halide perovskite solar cells

Bo Chen et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Doping strategies for small molecule organic hole-transport materials: impacts on perovskite solar cell performance and stability

Tracy H. Schloemer et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells

Amran Al-Ashouri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

A thermally stable, barium-stabilized α-CsPbI3 perovskite for optoelectronic devices

Sandeep Kajal et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Dual-source evaporation of silver bismuth iodide films for planar junction solar cells

Maryam Khazaee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

In situ formation of a 2D/3D heterostructure for efficient and stable CsPbI2Br solar cells

Meiqian Tai et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Achievable high Voc of carbon based all-inorganic CsPbIBr2 perovskite solar cells through interface engineering

Zhanglin Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Structured crystallization for efficient all-inorganic perovskite solar cells with high phase stability

Zhen Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Energy & Fuels

Efficient Inverted Planar Perovskite Solar Cells Using Ultraviolet/Ozone-Treated NiOx as the Hole Transport Layer

Tun Wang et al.

SOLAR RRL (2019)

Add to Collection

Article Chemistry, Physical

Precise Control of Crystal Growth for Highly Efficient CsPbI2Br Perovskite Solar Cells

Weijie Chen et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Europium-Doped CsPbI2Br for Stable and Highly Efficient Inorganic Perovskite Solar Cells

Wanchun Xiang et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Photovoltage Approaching 0.9 V for Planar Heterojunction Silver Bismuth Iodide Solar Cells with Li-TFSI Additive

Qiaohui Zhang et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Performance enhancement of AgBi2I7 solar cells by modulating a solvent-mediated adduct and tuning remnant BiI3 in one-step crystallization

Ashish Kulkarni et al.

CHEMICAL COMMUNICATIONS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Bi doping on physical properties of lead halide perovskites: a comparative first-principles study between CsPbI3 and CsPbBr3

Y. Kang et al.

MATERIALS TODAY ADVANCES (2019)

Add to Collection

Article Energy & Fuels

Fabrication of Sulfur-Incorporated Bismuth-Based Perovskite Solar Cells via a Vapor-Assisted Solution Process

Jihong Li et al.

SOLAR RRL (2019)

Add to Collection

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The multiple effects of polyaniline additive to improve the efficiency and stability of perovskite solar cells

Haiying Zheng et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells

Martin Stolterfoht et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Bifunctional Dye Molecule in All-Inorganic CsPbIBr2 Perovskite Solar Cells with Efficiency Exceeding 10%

Shuzhang Yang et al.

SOLAR RRL (2019)

Add to Collection

Article Chemistry, Physical

Temporal and spatial pinhole constraints in small-molecule hole transport layers for stable and efficient perovskite photovoltaics

Xiuxiu Niu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant-Free Tetrakis-Triphenylamine Hole Transporting Material for Efficient Tin-Based Perovskite Solar Cells

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Achieving High Open-Circuit Voltages up to 1.57 V in Hole-Transport-Material-Free MAPbBr3 Solar Cells with Carbon Electrodes

Yongqi Liang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Lead-Free Hybrid Perovskite Absorbers for Viable Application: Can We Eat the Cake and Have It too?

Lusheng Liang et al.

ADVANCED SCIENCE (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Limitations of Cs3Bi2I9 as Lead-Free Photovoltaic Absorber Materials

Biplab Ghosh et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Application of Cesium on the Restriction of Precursor Crystallization for Highly Reproducible Perovskite Solar Cells Exceeding 20% Efficiency

Gen Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCI3 via Hydrochloric Acid Vapor Annealing. Post-Treatment

Weiran Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Elucidating the Origins of Subgap Tail States and Open-Circuit Voltage in Methylammonium Lead Triiodide Perovskite Solar Cells

Tian Du et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfate-Assisted Interfacial Engineering for High Yield and Efficiency of Triple Cation Perovskite Solar Cells with Alkali-Doped TiO2 Electron-Transporting Layers

Trilok Singh et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Efficient 2D/3D Hybrid Perovskite Solar Cells via Low-Pressure Vapor-Assisted Solution Process

Ming-Hsien Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Interface Engineering for All-Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%

Lei Yan et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering

Chenxin Ran et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Article Chemistry, Physical

A Versatile Thin-Film Deposition Method for Multidimensional Semiconducting Bismuth Halides

Maryam Khazaee et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

High-Quality Cs2AgBiBr6 Double Perovskite Film for Lead-Free Inverted Planar Heterojunction Solar Cells with 2.2% Efficiency

Weiyin Gao et al.

CHEMPHYSCHEM (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells

Efat Jokar et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells

Wolfgang Tress et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

The Role of Surface Defects in Photoluminescence and Decay Dynamics of High-Quality Perovskite MAPbI(3) Single Crystals

Jie Ding et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Fundamental Efficiency Limit of Lead Iodide Perovskite Solar Cells

Luis M. Pazos-Outon et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Origin of Light-Induced Photophysical Effects in Organic Metal Halide Perovskites in the Presence of Oxygen

Miguel Anaya et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

First-principles study of electronic and optical properties of lead-free double perovskites Cs2NaBX6 (B = Sb, Bi; X = Cl, Br, I)

Shuai Zhao et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

All-Inorganic CsPbI2Br Perovskite Solar Cells with High Efficiency Exceeding 13%

Chong Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering.

Dae-Yong Son et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

The synergistic effect of non-stoichiometry and Sb-doping on air-stable alpha-CsPbI3 for efficient carbon-based perovskite solar cells

Sisi Xiang et al.

NANOSCALE (2018)

Add to Collection

Review Chemistry, Multidisciplinary

SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells

Qi Jiang et al.

SMALL (2018)

Add to Collection

Article Energy & Fuels

Lead-free, air-stable ultrathin Cs3Bi2I9 perovskite nanosheets for solar cells

Fan Bai et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Add to Collection

Article Multidisciplinary Sciences

Structural absorption by barbule microstructures of super black bird of paradise feathers

Dakota E. McCoy et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Enhancing Optical, Electronic, Crystalline, and Morphological Properties of Cesium Lead Halide by Mn Substitution for High-Stability All-Inorganic Perovskite Solar Cells with Carbon Electrodes

Jia Liang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

3D-2D-0D Interface Profiling for Record Efficiency All-Inorganic CsPbBrI2 Perovskite Solar Cells with Superior Stability

Jingru Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Low-temperature processed non-TiO2 electron selective layers for perovskite solar cells

Zhanglin Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Fundamental Carrier Lifetime Exceeding 1 mu s in Cs2AgBiBr6 Double Perovskite

Robert L. Z. Hoye et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

High Efficiency Low-Temperature Processed Perovskite Solar Cells Integrated with Alkali Metal Doped ZnO Electron Transport Layers

Randi Azmi et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Bilateral Interface Engineering toward Efficient 2D-3D Bulk Heterojunction Tin Halide Lead-Free Perovskite Solar Cells

Chenxin Ran et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Above 600 mV Open-Circuit Voltage BiI3 Solar Cells

Devendra Tiwari et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Highly Efficient Perovskite Solar Modules by Scalable Fabrication and Interconnection Optimization

Mengjin Yang et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Editorial Material Chemistry, Physical

Can B-Site Doping or Alloying Improve Thermal- and Phase-Stability of All-Inorganic CsPbX3 (X = CI, Br, I) Perovskites?

Abhishek Swarnkar et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Energy & Fuels

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

Nam Joong Jeon et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Stabilization of alpha-CsPbI3 in Ambient Room Temperature Conditions by Incorporating Eu into CsPbI3

Ajay Kumar Jena et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics

Yong Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Lanthanide Ions Doped CsPbBr3 Halides for HTM-Free 10.14%-Efficiency Inorganic Perovskite Solar Cell with an Ultrahigh Open-Circuit Voltage of 1.594 V

Jialong Duan et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Defect tolerant perovskite solar cells from blade coated non-toxic solvents

Zhuoneng Bi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Energy & Fuels

High irradiance performance of metal halide perovskites for concentrator photovoltaics

Zhiping Wang et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Electrical Conductivity 2D MXene Serves as Additive of Perovskite for Efficient Solar Cells

Zhanglin Guo et al.

SMALL (2018)

Add to Collection

Article Energy & Fuels

Solution-processed Sr-doped NiOx as hole transport layer for efficient and stable perovskite solar cells

Jiankai Zhang et al.

SOLAR ENERGY (2018)

Add to Collection

Article Energy & Fuels

Large guanidinium cation enhance photovoltage for perovskite solar cells via solution-processed secondary growth technique

Shuo Wang et al.

SOLAR ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Superior Performance of Silver Bismuth Iodide Photovoltaics Fabricated via Dynamic Hot-Casting Method under Ambient Conditions

Biplab Ghosh et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Research Update: Recombination and open-circuit voltage in lead-halide perovskites

Thomas Kirchartz et al.

APL MATERIALS (2018)

Add to Collection

Article Energy & Fuels

Lattice Modulation of Alkali Metal Cations Doped Cs1-xRxPbBr3 Halides for Inorganic Perovskite Solar Cells

Yanan Li et al.

SOLAR RRL (2018)

Add to Collection

Article Chemistry, Physical

Efficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations

Yong Wang et al.

JOULE (2018)

Add to Collection

Article Energy & Fuels

Improving Performance of Lead-Free Formamidinium Tin Triiodide Perovskite Solar Cells by Tin Source Purification

Feidan Gu et al.

SOLAR RRL (2018)

Add to Collection

Article Chemistry, Physical

2D-Quasi-2D-3D Hierarchy Structure for Tin Perovskite Solar Cells with Enhanced Efficiency and Stability

Fei Wang et al.

JOULE (2018)

Add to Collection

Article Energy & Fuels

High-Quality Sequential-Vapor-Deposited Cs2AgBiBr6 Thin Films for Lead-Free Perovskite Solar Cells

Ming Wang et al.

SOLAR RRL (2018)

Add to Collection

Article Energy & Fuels

Wide-Bandgap Perovskite Solar Cells With Large Open-Circuit Voltage of 1653mV Through Interfacial Engineering

Xiaowen Hu et al.

SOLAR RRL (2018)

Add to Collection

Article Chemistry, Physical

Band-Aligned Polymeric Hole Transport Materials for Extremely Low Energy Loss alpha-CsPbI3 Perovskite Nanocrystal Solar Cells

Jianyu Yuan et al.

JOULE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Approaching the fill factor Shockley-Queisser limit in stable, dopant-free triple cation perovskite solar cells

Martin Stolterfoht et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Tunable hysteresis effect for perovskite solar cells

Yaoguang Rong et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Effect of lead-free (CH3NH3)3Bi2I9 perovskite addition on spectrum absorption and enhanced photovoltaic performance of bismuth triiodide solar cells

Chunfeng Lan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Transient Optoelectronic Analysis of the Impact of Material Energetics and Recombination Kinetics on the Open-Circuit Voltage of Hybrid Perovskite Solar Cells

Scot Wheeler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

High Defect Tolerance in Lead Halide Perovskite CsPbBr3

Jun Kang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Charge Carrier Trapping at Surface Defects of Perovskite Solar Cell Absorbers: A First-Principles Study

Hiroki Uratani et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Oriented Low-Dimensional Tin Halide Perovskites with Enhanced Stability and Photovoltaic Performance

Yuqin Liao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Design of Lead-Free Inorganic Halide Perovskites for Solar Cells via Cation-Transmutation

Xin-Gang Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability

Jia Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Multidisciplinary Sciences

Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells

Woon Seok Yang et al.

SCIENCE (2017)

Add to Collection

Article Energy & Fuels

Controlled Ostwald ripening mediated grain growth for smooth perovskite morphology and enhanced device performance

Md Arafat Mahmud et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Add to Collection

Article Multidisciplinary Sciences

Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells

Nicholas Aristidou et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Highly stable, phase pure Cs2AgBiBr6 double perovskite thin films for optoelectronic applications

Enrico Greul et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Guanidinium thiocyanate selective Ostwald ripening induced large grain for high performance perovskite solar cells

Ngoc Duy Pham et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Mixed-Organic-Cation Tin Iodide for Lead-Free Perovskite Solar Cells with an Efficiency of 8.12%

Ziran Zhao et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Correlation between Electronic Defect States Distribution and Device Performance of Perovskite Solar Cells

Giovanni Landi et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Thin Films and Solar Cells Based on Semiconducting Two-Dimensional Ruddlesden-Popper (CH3(CH2)3NH3)2(CH3NH3)n-1SnnI3n+1 i Perovskites

Duyen H. Cao et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Recombination in Perovskite Solar Cells: Significance of Grain Boundaries, Interface Traps, and Defect Ions

Tejas S. Sherkar et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Strontium-Doped Low-Temperature-Processed CsPbI2Br Perovskite Solar Cells

Cho Fai Jonathan Lau et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Severe Morphological Deformation of Spiro-OMeTAD in (CH3NH3)Pbl3 Solar Cells at High Temperature

Ajay Kumar Jena et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Bismuth Incorporation Stabilized α-CsPbI3 for Fully Inorganic Perovskite Solar Cells

Yanqiang Hu et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Nonradiative Losses in Metal Halide Perovskites

Samuel D. Stranks

ACS ENERGY LETTERS (2017)

Add to Collection

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Understanding the physical properties of hybrid perovskites for photovoltaic applications

Jinsong Huang et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Article Multidisciplinary Sciences

Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI3

Weijun Ke et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Multidisciplinary Sciences

Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness

Michiru Nishita et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Multidisciplinary Sciences

Optical determination of Shockley-Read-Hall and interface recombination currents in hybrid perovskites

Valerio Sarritzu et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Photovoltaic Rudorffites: Lead-Free Silver Bismuth Halides Alternative to Hybrid Lead Halide Perovskites

Ivan Turkevych et al.

CHEMSUSCHEM (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Solvent-Coordinated Tin Halide Complexes as Purified Precursors for Tin-Based Perovskites

Masashi Ozaki et al.

ACS OMEGA (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Efficient Perovskite-Perovskite Tandem Solar Cells Reaching 80% of the Theoretical Limit in Photovoltage

Adharsh Rajagopal et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Band-Tail Recombination in Hybrid Lead Iodide Perovskite

Adam D. Wright et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Reduced Interface-Mediated Recombination for High Open-Circuit Voltages in CH3NH3PbI3 Solar Cells

Christian M. Wolff et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Facile Method to Reduce Surface Defects and Trap Densities in Perovskite Photovoltaics

Guifang Han et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Controlled Crystal Grain Growth in Mixed Cation-Halide Perovskite by Evaporated Solvent Vapor Recycling Method for High Efficiency Solar Cells

Youhei Numata et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Searching for Defect-Tolerant Photovoltaic Materials: Combined Theoretical and Experimental Screening

Riley E. Brandt et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Atomistic Origins of Surface Defects in CH3NH3PbBr3 Perovskite and Their Electronic Structures

Yunxia Liu et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Multidisciplinary

On the Origin of Hysteresis in Perovskite Solar Cells

Yiliang Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

The Additive Coordination Effect on Hybrids Perovskite Crystallization and High-Performance Solar Cell

Liang Li et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Pure Cubic-Phase Hybrid Iodobismuthates AgBi2I7 for Thin-Film Photovoltaics

Younghoon Kim et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Interface engineering via an insulating polymer for highly efficient and environmentally stable perovskite solar cells

Xiaoru Wen et al.

CHEMICAL COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

Facile Synthesis and Characterization of Sulfur Doped Low Bandgap Bismuth Based Perovskites by Soluble Precursor Route

Murugan Vigneshwaran et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Cs2AgBiX6 (X = Br, CI): New Visible Light Absorbing, Lead-Free Halide Perovskite Semiconductors

Eric T. McClure et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Coarsening of one-step deposited organolead triiodide perovskite films via Ostwald ripening for high efficiency planar-heterojunction solar cells

Weidong Zhu et al.

DALTON TRANSACTIONS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Carrier trapping and recombination: the role of defect physics in enhancing the open circuit voltage of metal halide perovskite solar cells

Tomas Leijtens et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Origin of J-V Hysteresis in Perovskite Solar Cells

Bo Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

TiO2-ZnS Cascade Electron Transport Layer for Efficient Formamidinium Tin Iodide Perovskite Solar Cells

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Carrier Diffusion Lengths of over 500 nm in Lead-Free Perovskite CH3NH3SnI3 Films

Lin Ma et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells

T. Jesper Jacobsson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of growth temperature on bulk and surface defects in hybrid lead halide perovskite films

Weina Peng et al.

NANOSCALE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A perovskite cell with a record-high-Voc of 1.61 V based on solvent annealed CH3NH3PbBr3/ICBA active layer

Chun-Guey Wu et al.

NANOSCALE (2016)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

Add to Collection

Article Chemistry, Physical

Stability of solution-processed MAPbI3 and FAPbI3 layers

Emanuele Smecca et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection

Article Energy & Fuels

Hysteresis in organic-inorganic hybrid perovskite solar cells

Naveen Kumar Elumalai et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Add to Collection

Article Energy & Fuels

Zero-dimensional (CH3NH3)3Bi2I9 perovskite for optoelectronic applications

Senol Oz et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Add to Collection

Article Chemistry, Physical

Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?

Fangzhou Liu et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Review Chemistry, Physical

Recent progress in electron transport layers for efficient perovskite solar cells

Guang Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Energy & Fuels

Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

Dongqin Bi et al.

NATURE ENERGY (2016)

Add to Collection

Article Energy & Fuels

Defects in perovskite-halides and their effects in solar cells

James M. Ball et al.

NATURE ENERGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Ultrahigh sensitivity of methylammonium lead tribromide perovskite single crystals to environmental gases

Hong-Hua Fang et al.

SCIENCE ADVANCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application

Byung-Wook Park et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers

Nicholas Aristidou et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Chemistry, Physical

Crystal and Electronic Structures of Complex Bismuth Iodides A3Bi2I9 (A = K, Rb, Cs) Related to Perovskite: Aiding the Rational Design of Photovoltaics

Anna J. Lehner et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Investigation of Bismuth Triiodide (Bil3) for Photovoltaic Applications

Riley E. Brandt et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Physical

Mechanistic insights into perovskite photoluminescence enhancement: light curing with oxygen can boost yield thousandfold

Yuxi Tian et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Add to Collection

Article Multidisciplinary Sciences

Impact of microstructure on local carrier lifetime in perovskite solar cells

Dane W. deQuilettes et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics

Eric T. Hoke et al.

CHEMICAL SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite

Bert Conings et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Hydrochloric acid accelerated formation of planar CH3NH3PbI3 perovskite with high humidity tolerance

Ge Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Inorganic caesium lead iodide perovskite solar cells

Giles E. Eperon et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Doped hole transport layer for efficiency enhancement in planar heterojunction organolead trihalide perovskite solar cells

Qi Wang et al.

NANO ENERGY (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Perovskite Solar Cell with an Efficient TiO2 Compact Film

Weijun Ke et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance

Wan-Jian Yin et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Physics, Applied

Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber

Wan-Jian Yin et al.

APPLIED PHYSICS LETTERS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Lead-free organic-inorganic tin halide perovskites for photovoltaic applications

Nakita K. Noel et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Photoinduced Giant Dielectric Constant in Lead Halide Perovskite Solar Cells

Emilio J. Juarez-Perez et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Optics

Lead-free solid-state organic-inorganic halide perovskite solar cells

Feng Hao et al.

NATURE PHOTONICS (2014)

Add to Collection

Article Multidisciplinary Sciences

Interface engineering of highly efficient perovskite solar cells

Huanping Zhou et al.

SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

High performance perovskite solar cells by hybrid chemical vapor deposition

Matthew R. Leyden et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Morphology-photovoltaic property correlation in perovskite solar cells: One-step versus two-step deposition of CH3NH3PbI3

Jeong-Hyeok Im et al.

APL MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer

Yanming Sun et al.

ADVANCED MATERIALS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Indene-C60 Bisadduct: A New Acceptor for High-Performance Polymer Solar Cells

Youjun He et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.