Related references
Note: Only part of the references are listed.A niobium-substituted sodium superionic conductor with conductivity higher than 5.5 mS cm-1 prepared by solution-assisted solid-state reaction method
Yujian Liu et al.
JOURNAL OF POWER SOURCES (2022)
Next-Generation Cobalt-Free Cathodes - A Prospective Solution to the Battery Industry's Cobalt Problem
Nitin Muralidharan et al.
ADVANCED ENERGY MATERIALS (2022)
A stable quasi-solid electrolyte improves the safe operation of highly efficient lithium-metal pouch cells in harsh environments
Zhi Chang et al.
NATURE COMMUNICATIONS (2022)
Multifunctional Protection Layers via a Self-Driven Chemical Reaction To Stabilize Lithium Metal Anodes
Boyu Li et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Gallium-substituted Nasicon Na3Zr2Si2PO12 solid electrolytes
Congcai Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
A Review of Degradation Mechanisms and Recent Achievements for Ni-Rich Cathode-Based Li-Ion Batteries
Ming Jiang et al.
ADVANCED ENERGY MATERIALS (2021)
Current and future lithium-ion battery manufacturing
Yangtao Liu et al.
ISCIENCE (2021)
A Perspective on the Sustainability of Cathode Materials used in Lithium-Ion Batteries
Beth E. Murdock et al.
ADVANCED ENERGY MATERIALS (2021)
Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces
Rusong Chen et al.
CHEMICAL REVIEWS (2020)
High-nickel layered oxide cathodes for lithium-based automotive batteries
Wangda Li et al.
NATURE ENERGY (2020)
High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes
Yong-Gun Lee et al.
NATURE ENERGY (2020)
Influence of electronically conductive additives on the cycling performance of argyrodite-based all-solid-state batteries
Florian Strauss et al.
RSC ADVANCES (2020)
Cation-disordered rocksalt transition metal oxides and oxyfluorides for high energy lithium-ion cathodes
R. J. Clement et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
A Bottom-Up Approach to Lithium-Ion Battery Cost Modeling with a Focus on Cathode Active Materials
Marc Wentker et al.
ENERGIES (2019)
Viscoelastic and Nonflammable Interface Design-Enabled Dendrite-Free and Safe Solid Lithium Metal Batteries
Qiang Ma et al.
ADVANCED ENERGY MATERIALS (2019)
Commercialization of Lithium Battery Technologies for Electric Vehicles
Xiaoqiao Zeng et al.
ADVANCED ENERGY MATERIALS (2019)
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Yuanli Ding et al.
ELECTROCHEMICAL ENERGY REVIEWS (2019)
Prospects of production technologies and manufacturing costs of oxide-based all-solid-state lithium batteries
Joscha Schnell et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Prospect and Reality of Ni-Rich Cathode for Commercialization
Junhyeok Kim et al.
ADVANCED ENERGY MATERIALS (2018)
Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries
Paul Albertus et al.
NATURE ENERGY (2018)
Artificial Soft-Rigid Protective Layer for Dendrite-Free Lithium Metal Anode
Rui Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
All-solid-state lithium-ion and lithium metal batteries - paving the way to large-scale production
Joscha Schnell et al.
JOURNAL OF POWER SOURCES (2018)
Designing principle for Ni-rich cathode materials with high energy density for practical applications
Yu Xia et al.
NANO ENERGY (2018)
Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping
Qi Liu et al.
NATURE ENERGY (2018)
Performance and cost of materials for lithium-based rechargeable automotive batteries
Richard Schmuch et al.
NATURE ENERGY (2018)
Stabilization of a High-Capacity and High-Power Nickel-Based Cathode for Li-Ion Batteries
Xiaoqiao Zeng et al.
CHEM (2018)
Study on the Characteristics of a High Capacity Nickel Manganese Cobalt Oxide (NMC) Lithium-Ion Battery-An Experimental Investigation
Ruifeng Zhang et al.
ENERGIES (2018)
Surface Structural and Chemical Evolution of Layered LiNi0.8Co0.15Al0.050O2 (NCA) under High Voltage and Elevated Temperature Conditions
Pinaki Mukherjee et al.
CHEMISTRY OF MATERIALS (2018)
ICAC 2018: The First International Conference Focused on NCM & NCA Cathode Materials for Lithium Ion Batteries
Won-Jin Kwak et al.
ACS ENERGY LETTERS (2018)
Lithium-Ion Battery Electrochemical-Thermal Model Using Various Materials as Cathode Material: A Simulation Study
Gang Zheng et al.
CHEMISTRYSELECT (2018)
The Development and Future of Lithium Ion Batteries
George E. Blomgren
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives
Seung-Taek Myung et al.
ACS ENERGY LETTERS (2017)
Thick-films of garnet-type lithium ion conductor prepared by the Aerosol Deposition Method: The role of morphology and annealing treatment on the ionic conductivity
Dominik Hanft et al.
JOURNAL OF POWER SOURCES (2017)
Review-Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kian Kerman et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Core-shell and concentration-gradient cathodes prepared via co-precipitation reaction for advanced lithium-ion batteries
Peiyu Hou et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
An Outlook on Lithium Ion Battery Technology
Arumugam Manthiram
ACS CENTRAL SCIENCE (2017)
The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries
Wenbo Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
A lithium-oxygen battery based on lithium superoxide
Jun Lu et al.
NATURE (2016)
Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating
Zheng Liang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
A solid future for battery development
Juergen Janek et al.
NATURE ENERGY (2016)
Future generations of cathode materials: an automotive industry perspective
Dave Andre et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
A Fundamental Stability Study for Amorphous LiLaTiO3 Solid Electrolyte
Zhangfeng Zheng et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Driving change in the battery industry
Christian Martin
NATURE NANOTECHNOLOGY (2014)
Low-Potential Sodium Insertion in a NASICON-Type Structure through the Ti(III)/Ti(II) Redox Couple
P. Senguttuvan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Failure Mechanism of Graphite/LiNi0.5Mn1.5O4 Cells at High Voltage and Elevated Temperature
Dongsheng Lu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Single-Crystalline LiMn2O4 Nanotubes Synthesized Via Template-Engaged Reaction as Cathodes for High-Power Lithium Ion Batteries
Yuan-Li Ding et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Issue and challenges facing rechargeable thin film lithium batteries
Arun Patil et al.
MATERIALS RESEARCH BULLETIN (2008)
Dependence of AlPO4 coating thickness on overcharge behaviour of LiCoO2 cathode material at 1 and 2 C rates
J Cho
JOURNAL OF POWER SOURCES (2004)
Share Paper
