Related references
Note: Only part of the references are listed.Effects of solder thickness on interface behavior and nanoindentation characteristics in Cu/Sn/Cu microbumps
Zhiyuan Zhang et al.
WELDING IN THE WORLD (2022)
Effects of doping trace Ni element on interfacial behavior of Sn/Ni (polycrystal/single-crystal) joints
Jianing Wang et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2022)
Technology Trends in 2.5D/3D Packaging and Heterogeneous Integration
Masaya Kawano
2021 5TH IEEE ELECTRON DEVICES TECHNOLOGY & MANUFACTURING CONFERENCE (EDTM) (2021)
Influence of additives on electroplated copper films and shear strength of SAC305/Cu solder joints
Xudong Zhang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Suppressing interfacial voids in Cu/In/Cu microbump with Sn and Cu addition
Rui-Wen Song et al.
MATERIALS LETTERS (2020)
Tensile Properties and Thermal Stability of Unidirectionally <111>-Oriented Nanotwinned and <110>-Oriented Microtwinned Copper
Yu-Jin Li et al.
MATERIALS (2020)
Interfacial transfer and phase evolution between Cu and Sn solder doped with minor Cu, Ag and Ni: experimental and theoretical investigations
Mingyuan Yang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)
The Obstruction Effect of Ni Layer on the Interdiffusion of Cu Substrate and Sn Solder: A Theoretical Investigation
Zhuo Mao et al.
JOURNAL OF ELECTRONIC MATERIALS (2020)
Effects of accelerator in a copper plating bath on interfacial microstructure and mechanical properties of SAC305/Cu solder joints
Han Xu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)
Effect of crystal structure of nickel substrates on interfacial behaviors in Sn/Ni soldered joints
Ming Yuan Yang et al.
MATERIALS LETTERS (2020)
Effect of Copper Grain Size on the Interfacial Microstructure of a Sn/Cu Joint
Po-Fan Chan et al.
ACS APPLIED ELECTRONIC MATERIALS (2020)
The Ultrahigh-Rate Growth of Nanotwinned Copper Induced by Thiol Organic Additives
Chun-Cheng Lin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Impurity evaporation and void formation in Sn/Cu solder joints
Hsuan-Ling Hsu et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Effect of substrates on the formation of Kirkendall voids in Sn/Cu joints
Jieshi Chen et al.
WELDING IN THE WORLD (2019)
Suppression of Void Formation at Sn/Cu Joint Due to Twin Formation in Cu Electrodeposit
Shan-Ting Tsai et al.
JOM (2019)
Recent advances in nano-materials for packaging of electronic devices
Shuye Zhang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
A review: Formation of voids in solder joint during the transient liquid phase bonding process - Causes and solutions
Omid Mokhtari
MICROELECTRONICS RELIABILITY (2019)
Effect of Cu additions on mechanical properties of Ni3Sn4-based intermetallic compounds: First-principles calculations and nano-indentation measurements
Xiaoyang Bi et al.
VACUUM (2019)
The Zn accumulation behavior, phase evolution and void formation in Sn-xZn/Cu systems by considering trace Zn: a combined experimental and theoretical study
Jieshi Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Study of grain size effect of Cu metallization on interfacial microstructures of solder joints
Zeyang Zheng et al.
MICROELECTRONICS RELIABILITY (2019)
Novel polarity effect on intermetallic compound thickness changes during electromigration in Cu/Sn-3.0Ag-0.5Cu/Cu solder joints
Zhi Jin et al.
JOURNAL OF APPLIED PHYSICS (2019)
Molecular analysis of additives and impurities accumulated on copper electrodeposited layer by time-of-flight secondary ion mass spectrometry
Robert Mroczka et al.
APPLIED SURFACE SCIENCE (2019)
Recent progress on the development of Sn-Bi based low-temperature Pb-free solders
Fengjiang Wang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Influence of additives on electroplated copper films and their solder joints
Hsuan Lee et al.
MATERIALS CHARACTERIZATION (2019)
The effects of Ni addition on microstructure evolution and mechanical properties of solder joints undergoing solid-liquid electromigration
Hongyu Qiu et al.
MATERIALS LETTERS (2019)
The Role of Ultrafine Crystalline Behavior and Trace Impurities in Copper on Intermetallic Void Formation
Glenn Ross et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
Development of nanotwins in electroplated copper and its effect on shear strength of tin/copper joint
Hsuan Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Impurity-induced unusual microstructural evolution and mechanical property in Sn/Cu solder joints
Hsuan-Ling Hsu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Effect of film thickness and Ti interlayer on structure and properties of Nanotwinned Cu thin films
Fan-Yi Ouyang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Impurity Effects in Electroplated-Copper Solder Joints
Hsuan Lee et al.
METALS (2018)
Effect of electroplating parameters on electroplated Cu film and microvoid formation of solder joints
Yongqiang Wan et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Interface Growth and Void Formation in Sn/Cu and Sn0.7Cu/Cu Systems
Jieshi Chen et al.
APPLIED SCIENCES-BASEL (2018)
High-Speed Cu Electrodeposition and Reliability of Cu Pillar Bumps in High-Temperature Storage
P. T. Lee et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Effect of Cu electroplating parameters on microvoid formation and high-speed shear strength in Sn-3.0Ag-0.5Cu/Cu joints
Jae-Yong Park et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Impurity Incorporation in the Cu Electrodeposit and Its Effects on the Microstructural Evolution of the Sn/Cu Solder Joints
Hsuan Lee et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Depth-dependent self-annealing behavior of electroplated Cu
Chang-Chih Chen et al.
SURFACE & COATINGS TECHNOLOGY (2017)
High-speed Cu electrodeposition and its solderability
P. T. Lee et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Interfacial void segregation of Cl in Cu-Sn micro-connects
Glenn Ross et al.
ELECTRONIC MATERIALS LETTERS (2017)
Gigahertz scanning acoustic microscopy analysis of voids in Cu-Sn micro-connects
G. Ross et al.
APPLIED PHYSICS LETTERS (2017)
Effects of Brighteners in a Copper Plating Bath on Throwing Power and Thermal Reliability of Plated Through Holes
Tzu-Chi Chen et al.
ELECTROCHIMICA ACTA (2016)
Void formation and its impact on Cu-Sn intermetallic compound formation
Glenn Ross et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effects of Cu Electroplating Formulas on the Interfacial Microstructures of Sn/Cu Joints
Tai-Yi Yu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Investigation of interfacial behavior in miniaturized solder interconnects
J. Magnien et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructural Evolution of Cu/Solder/Cu Pillar-Type Structures with Different Diffusion Barriers
Hsi-Kuei Cheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
In-situ study on the self-annealing behavior of electroplated Cu through the cantilever method, XRD, and EBSD
Cheng-En Ho et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Influence of roughness on in-vivo properties of titanium implant surface and their electrochemical behavior
Shih Hsun Chen et al.
SURFACE & COATINGS TECHNOLOGY (2016)
The influence of Ni and Zn additions on microstructure and phase transformations in Sn-0.7Cu/Cu solder joints
Guang Zeng et al.
ACTA MATERIALIA (2015)
Optimal Ag addition for the elimination of voids in Ni/SnAg/Ni micro joints for 3D IC applications
J. J. Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Interfacial reactions between Cu and SnAgCu solder doped with minor Ni
Hsi-Kuei Cheng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Mechanism of volume shrinkage during reaction between Ni and Ag-doped Sn
C. C. Li et al.
MATERIALS LETTERS (2015)
Effect of Cu grain size on the voiding propensity at the interface of SnAgCu/Cu solder joints
Hailong Li et al.
MATERIALS LETTERS (2015)
Electron backscatter diffraction characterization of electrolytic Cu deposition in the blind-hole structure: Current density effect
C. E. Ho et al.
THIN SOLID FILMS (2015)
Formation mechanism of pinholes in electroplated Cu films and its mitigation
Chang-Chih Chen et al.
THIN SOLID FILMS (2015)
Combined Secondary Ion Mass Spectrometry Depth Profiling and Focused Ion Beam Analysis of Cu Films Electrodeposited under Oscillatory Conditions
Nguyen T. M. Hai et al.
CHEMELECTROCHEM (2015)
Fabrication of Cu-Ni mixed phase layer using DC electroplating and suppression of Kirkendall voids in Sn-Ag-Cu solder joints
Sang-Soo Chee et al.
ELECTRONIC MATERIALS LETTERS (2014)
Effect of Cu-Sn intermetallic compound reactions on the Kirkendall void growth characteristics in Cu/Sn/Cu microbumps
Jong-Myeong Park et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2014)
Effects of Electroplating Additives on the Interfacial Reactions between Sn and Cu Electroplated Layers
Je-Yi Wu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Effect of deposit thickness during electroplating on Kirkendall voiding at Sn/Cu joints
Chun Yu et al.
MATERIALS LETTERS (2014)
Solidification of Sn-0.7Cu-0.15Zn Solder: In Situ Observation
Guang Zeng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Fe addition to Sn-3.5Ag solder for the suppression of Kirkendall void formation
S. H. Kim et al.
SCRIPTA MATERIALIA (2013)
Inhibiting the Growth of Cu3Sn and Kirkendall Voids in the Cu/Sn-Ag-Cu System by Minor Pd Alloying
Cheng En Ho et al.
ELECTRONIC MATERIALS LETTERS (2012)
Influence of Poly(ethylene glycol) Degradation on Voiding Sporadically Occurring in Solder Joints with Electroplated Cu
F. Wafula et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
Development and Evaluation of Direct Deposition of Au/Pd(P) Bilayers over Cu Pads in Soldering Applications
C. E. Ho et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
Suppression of Cu3Sn and Kirkendall voids at Cu/Sn-3.5Ag solder joints by adding a small amount of Ge
Chun Yu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2012)
Effect of the deposition parameters on the voiding propensity of solder joints with Cu electroplated in a Hull cell
F. Wafula et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2011)
On the root cause of Kirkendall voiding in Cu3Sn
Liang Yin et al.
JOURNAL OF MATERIALS RESEARCH (2011)
Assessing the risk of Kirkendall voiding in Cu3Sn
Peter Borgesen et al.
MICROELECTRONICS RELIABILITY (2011)
Inhibiting the formation of microvoids in Cu3Sn by additions of Cu to solders
Y. W. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effects of Ag on the Kirkendall void formation of Sn-xAg/Cu solder joints
Sunghwan Kim et al.
JOURNAL OF APPLIED PHYSICS (2010)
Secondary IMC formation induced by Kirkendall voiding in Cu/Sn-3.5Ag solder joints
S. H. Kim et al.
JOURNAL OF MATERIALS RESEARCH (2010)
Effects of direct current and pulse-reverse copper plating incubation behavior of self-annealing
Min-Yuan Cheng et al.
THIN SOLID FILMS (2010)
Effects of sulfide-forming element additions on the Kirkendall void formation and drop impact reliability of Cu/Sn-3.5Ag solder joints
J. Y. Kim et al.
ACTA MATERIALIA (2009)
Effects of minor Fe, Co, and Ni additions on the reaction between SnAgCu solder and Cu
Y. W. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Kirkendall voids formation in the reaction between Ni-doped SnAg lead-free solders and different Cu substrates
Y. W. Wang et al.
MICROELECTRONICS RELIABILITY (2009)
Effects of residual S on Kirkendall void formation at Cu/Sn-3.5Ag solder joints
Jin Yu et al.
ACTA MATERIALIA (2008)
Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering
J. Y. Kim et al.
APPLIED PHYSICS LETTERS (2008)
Effects of minor additions of Zn on interfacial reactions of Sn-Ag-Cu and Sn-Cu solders with various Cu substrates during thermal aging
Moon Gi Cho et al.
JOURNAL OF ELECTRONIC MATERIALS (2007)
Incorporation of sulfur, chlorine, and carbon into electroplated Cu thin films
M. Stangl et al.
MICROELECTRONIC ENGINEERING (2007)
Interfacial reactions of Sn-Ag-Cu solders modified by minor Zn alloying addition
SK Kang et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Suppression of void coalescence in thermal aging of tin-silver-copper-X solder joints
IE Anderson et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Effect of plating current density and annealing on impurities in electroplated Cu film
CW Liu et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2005)
Atomic mechanisms of grain boundary diffusion: Low versus high temperatures
A Suzuki et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Interfacial reactions between lead-free solders and common base materials
T Laurila et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability
KJ Zeng et al.
JOURNAL OF APPLIED PHYSICS (2005)
The Kirkendall effect in multiphase diffusion
A Paul et al.
ACTA MATERIALIA (2004)
Controlling Ag3Sn plate formation, in near-ternary-eutectic Sn-Ag-Cu solder by minor Zn alloying
SK Kang et al.
JOM (2004)
Share Paper
