4.8 Article

Different interfacial reactivity of lithium metal chloride electrolytes with high voltage cathodes determines solid-state battery performance

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Origin of high electrochemical stability of multi-metal chloride solid electrolytes for high energy all-solid-state lithium-ion batteries

Guofeng Xu et al.

Summary: This study introduces a multi-metal chloride solid-state electrolyte with excellent electrochemical stability and high ionic conductivity, which, combined with high-performance cathodes and high-voltage electrolytes, demonstrates superior electrochemical performance for all-solid-state batteries.

NANO ENERGY (2022)

Article Energy & Fuels

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Laidong Zhou et al.

Summary: A series of new lithium mixed-metal chlorospinels are reported as solid electrolytes for all-solid-state lithium batteries, which exhibit high ionic conductivity and low electronic conductivity, showing potential for high-performance all-solid-state lithium batteries.

NATURE ENERGY (2022)

Article Chemistry, Multidisciplinary

Advanced Nanoparticle Coatings for Stabilizing Layered Ni-Rich Oxide Cathodes in Solid-State Batteries

Yuan Ma et al.

Summary: By using preformed nanoparticles synthesized via solvothermal method, a uniform surface layer with unique structure can be formed on layered Ni-rich oxide cathode active material, which contributes to enhanced performance of solid-state batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Engineering, Environmental

Li+ conduction in aliovalent-substituted monoclinic Li2ZrCl6 for all-solid-state batteries: Li2+xZr1-xMxCl6 (M = In, Sc)

Hiram Kwak et al.

Summary: Aliovalent-substituted Li2ZrCl6 with In3+ (or Sc3+) shows drastically increased Li+ conductivity, attributed to anisotropic lattice volume expansion and redistribution of Li in the lattice, leading to more favorable Li+ migration pathways in the (002) plane.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Insights into the Lithium Sub-structure of Superionic Conductors Li3YCl6 and Li3YBr6

Roman Schlem et al.

Summary: The study investigates the lithium sub-structure of Li3YCl6 and Li3YBr6 using neutron diffraction and compares the influence of different synthetic approaches on yttrium disorder and the surrounding lithium sub-structure. This work provides insights into the strong differences in ionic transport depending on the synthesis procedure of Li3MX6 materials.

CHEMISTRY OF MATERIALS (2021)

Article Engineering, Environmental

Heat treatment protocol for modulating ionic conductivity via structural evolution of Li3-xYb1-xMxCl6 (M = Hf4+, Zr4+) new halide superionic conductors for all-solid-state batteries

Juhyoun Park et al.

Summary: In this study, the dynamic structural evolution and Li+ ionic conductivity of Li3YbCl6 under different heat treatment temperatures and aliovalent substitutions were investigated. It was found that aliovalent substitutions significantly improved Li+ ionic conductivity by optimizing the concentration of Li+ charge carriers and vacancies, leading to enhanced performance in all-solid-state batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Multidisciplinary Sciences

Anomalous collapses of Nares Strait ice arches leads to enhanced export of Arctic sea ice

G. W. K. Moore et al.

Summary: Ice arches at the northern and southern ends of Nares Strait, a key passage in the Arctic, are forming for shorter durations, leading to increased ice transport and accelerating the export of multi-year ice.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

New Cost-Effective Halide Solid Electrolytes for All-Solid-State Batteries: Mechanochemically Prepared Fe3+-Substituted Li2ZrCl6

Hiram Kwak et al.

Summary: The new halide superionic conductors Li2ZrCl6 and Fe3+-substituted Li2ZrCl6 exhibit high Li+ conductivity, offering new possibilities for the development of all-solid-state batteries.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Linking Solid Electrolyte Degradation to Charge Carrier Transport in the Thiophosphate-Based Composite Cathode toward Solid-State Lithium-Sulfur Batteries

Saneyuki Ohno et al.

Summary: This study investigates the enhancement of solid-state lithium-sulfur batteries, demonstrating improved capacity retention with high areal capacity after 100 cycles at room temperature. The research findings are applicable to any solid-state composite with electrically insulating active materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Materials Science, Multidisciplinary

A review on the stability and surface modification of layered transition-metal oxide cathodes

Ju-Myung Kim et al.

Summary: The increasing demand for high energy density batteries and stable electrochemical performance has drawn attention to the promising candidates of layered transition metal oxides, facing challenges in stability. Various surface modification strategies have been pursued to enhance the stability of these cathode materials.

MATERIALS TODAY (2021)

Article Chemistry, Physical

In Search of the Best Solid Electrolyte-Layered Oxide Pairing for Assembling Practical All-Solid-State Batteries

Tuncay Koc et al.

Summary: The study focused on the compatibility between solid electrolytes and cathode active materials in all-solid-state batteries, finding that Li6PS5Cl prepared by dry routes performed the best. However, electrolytes prepared by solution chemistry showed mixed results in terms of battery performance improvement. The research also revealed strong dependence on carbon additives and chemical/electrochemical incompatibility between Li3InCl6 and Li6PS5Cl/beta-Li3PS4.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Single- or Poly-Crystalline Ni-Rich Layered Cathode, Sulfide or Halide Solid Electrolyte: Which Will be the Winners for All-Solid-State Batteries?

Yoonjae Han et al.

Summary: The use of single-crystalline NCA and oxidation-tolerable Li3YCl6 in all-solid-state batteries shows promising results in terms of discharge capacity, initial Coulombic efficiency, cycling performance, and rate capability. The overlooked contribution of side reactions to the degradation of polycrystalline NCA is revealed for the first time in this study through rigorous characterization and analysis.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

First-Principles Prediction of the Electrochemical Stability and Reaction Mechanisms of Solid-State Electrolytes

Tammo K. Schwietert et al.

Summary: The electrochemical stability of solid electrolytes is influenced not only by the intrinsic stability of the material structure, but also by the redoxactivity of the solid electrolyte. By using a computational approach, it is possible to better predict voltage ranges and material structural stabilities, guiding solid-state batteries towards improved interfaces and material design.

JACS AU (2021)

Article Materials Science, Multidisciplinary

Lithium Ytterbium-Based Halide Solid Electrolytes for High Voltage All-Solid-State Batteries

Se Young Kim et al.

Summary: A new metastable phase Li3YbCl6 and mixed-metal halide solid electrolytes Li3-xYb1-xZrxCl6 were discovered for high-voltage cathodes with good stability and high ionic conductivity. The high electrochemical oxidation stability of the mixed-metal halide solid electrolyte enables cycling with uncoated >4 V-class cathodes in all-solid-state cells.

ACS MATERIALS LETTERS (2021)

Article Chemistry, Physical

High-Voltage Superionic Halide Solid Electrolytes for All-Solid-State Li-Ion Batteries

Kern-Ho Park et al.

ACS ENERGY LETTERS (2020)

Article Energy & Fuels

Benchmarking the performance of all-solid-state lithium batteries

Simon Randau et al.

NATURE ENERGY (2020)

Article Nanoscience & Nanotechnology

Theoretical Design of Lithium Chloride Superionic Conductors for All-Solid-State High-Voltage Lithium-Ion Batteries

Dongsu Park et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries

Thorben Krauskopf et al.

CHEMICAL REVIEWS (2020)

Editorial Material Chemistry, Physical

Promising All-Solid-State Batteries for Future Electric Vehicles

Yang-Kook Sun

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

Enhanced ion conduction by enforcing structural disorder in Li-deficient argyrodites Li6-xPS5-xCl1-x

Xuyong Peng et al.

ENERGY STORAGE MATERIALS (2020)

Article Electrochemistry

Influence of NCM Particle Cracking on Kinetics of Lithium-Ion Batteries with Liquid or Solid Electrolyte

Raffael Ruess et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

A new halospinel superionic conductor for high-voltage all solid state lithium batteries

Laidong Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Multidisciplinary

Lithium Chlorides and Bromides as Promising Solid-State Chemistries for Fast Ion Conductors with Good Electrochemical Stability

Shuo Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Physical

An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries

Hongyang Li et al.

CHEMISTRY OF MATERIALS (2019)

Article Chemistry, Physical

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

Georg F. Dewald et al.

CHEMISTRY OF MATERIALS (2019)

Article Chemistry, Multidisciplinary

New Family of Argyrodite Thioantimonate Lithium Superionic Conductors

Laidong Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

Air-stable Li3InCl6 electrolyte with high voltage compatibility for all-solid-state batteries

Xiaona Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

Assessment of all-solid-state lithium-ion batteries

P. Braun et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Gas Evolution in All-Solid-State Battery Cells

Timo Bartsch et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Physical

Li3BO3-Li2CO3: Rationally Designed Buffering Phase for Sulfide All Solid-State Li-Ion Batteries

Sung Hoo Jung et al.

CHEMISTRY OF MATERIALS (2018)

Article Chemistry, Multidisciplinary

Inducing High Ionic Conductivity in the Lithium Superionic Argyrodites Li6+x P(1-x)Ge(x)S(5)l for All -Solid-State Batteries

Marvin A. Kraft et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Review Electrochemistry

Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density

Tobias Placke et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2017)

Article Electrochemistry

Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Impact of Film Stoichiometry on the Ionization Energy and Electronic Structure of CH3NH3PbI3 Perovskites

Jennifer Emara et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Physical

Interface Stability in Solid-State Batteries

William D. Richards et al.

CHEMISTRY OF MATERIALS (2016)

Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

Article Materials Science, Multidisciplinary

Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis

Shyue Ping Ong et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

Article Nanoscience & Nanotechnology

Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

Anubhav Jain et al.

APL MATERIALS (2013)

Article Chemistry, Physical

A lithium superionic conductor

Noriaki Kamaya et al.

NATURE MATERIALS (2011)

Article Chemistry, Physical

Interpretation of the Gerischer impedance in solid state ionics

BA Boukamp et al.

SOLID STATE IONICS (2003)