4.5 Article

Development of an Innovative Procedure for Lithium Plating Limitation and Characterization of 18650 Cycle Aged Cells for DCFC Automotive Applications

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Operando detection of Li plating during fast charging of Li-ion batteries using incremental capacity analysis

Yuxin Chen et al.

Summary: In this study, incremental capacity analysis was applied to investigate lithium plating during charging process. The results showed the correlation between lithium plating and specific IC peak, and demonstrated the applicability of IC analysis in studying lithium plating in novel cell architectures.

JOURNAL OF POWER SOURCES (2022)

Review Energy & Fuels

Detecting undesired lithium plating on anodes for lithium-ion batteries-A review on the in-situ methods

Yu Tian et al.

Summary: This study reviews recent progress in developing methods for in-situ detecting lithium plating, categorizing these methods into electrochemical and physical methods and discussing trends for future development of novel technologies.

APPLIED ENERGY (2021)

Article Chemistry, Physical

How Fast Can a Li-Ion Battery Be Charged? Determination of Limiting Fast Charging Conditions

Marco T. F. Rodrigues et al.

Summary: This study proposes a method to estimate the maximum average rate at which lithium deposition can be mitigated by measuring and correcting the ohmic drop to approximate the local potential at the anode surface, which can inform the development of advanced charging protocols.

ACS APPLIED ENERGY MATERIALS (2021)

Review Green & Sustainable Science & Technology

An advance review of solid-state battery: Challenges, progress and prospects

Cong Li et al.

Summary: This review highlights the importance of solid electrolytes in lithium-ion batteries, discusses the challenges in optimizing the performance of solid electrolytes, and provides an outlook on future research directions.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2021)

Article Energy & Fuels

Progress in solid-state high voltage lithium-ion battery electrolytes

Anwar Ahniyaz et al.

Summary: Developing high specific energy lithium-ion batteries is crucial for efficient electric vehicles to meet customer expectations on electric range. Increasing operating voltage and utilizing solid-state electrolytes are important strategies, while addressing safety concerns like dendrite growth is a major challenge.

ADVANCES IN APPLIED ENERGY (2021)

Article Electrochemistry

Identification of Degradation Mechanisms by Post-Mortem Analysis for High Power and High Energy Commercial Li-Ion Cells after Electric Vehicle Aging

Pierre Kuntz et al.

Summary: Driven by the rise of the electric automotive industry, the Li-ion battery market is expanding rapidly, but serious performance degradation occurs during aging, with different aging mechanisms favored under different operational conditions leading to performance decay.

BATTERIES-BASEL (2021)

Article Electrochemistry

Detection of Lithium Plating in Li-Ion Cell Anodes Using Realistic Automotive Fast-Charge Profiles

Matteo Dotoli et al.

Summary: The widespread adoption of electric vehicles is hindered by range anxiety, but an optimized fast-charge profile can improve both charging time and battery life. Lithium plating is identified as a major factor affecting battery capacity fade.

BATTERIES-BASEL (2021)

Article Materials Science, Multidisciplinary

Intermetallic interphases in lithium metal and lithium ion batteries

Ke Sun et al.

Summary: A robust electrode-electrolyte interface is crucial for battery systems, especially in the development of new battery technologies. The introduction of artificial Li-alloying intermetallic interphases has significantly improved the stability and performance of lithium metal batteries and solid-state batteries.

INFOMAT (2021)

Article Electrochemistry

Early Detection of Failing Automotive Batteries Using Gas Sensors

Christiane Essl et al.

Summary: The study investigated gases produced during battery failure, before and during thermal runaway, and tested different gas sensors as early detectors of battery incidents. Several commercially available gas sensors were tested in four battery failure cases, showing that gas sensors can detect battery failures depending on the specific case. The chosen gas sensor was able to detect hydrogen from unwanted electrolysis, electrolyte vapor, and gases released from state-of-the-art LIBs, contributing significantly to improving battery safety.

BATTERIES-BASEL (2021)

Article Electrochemistry

Incremental Capacity Analysis as a State of Health Estimation Method for Lithium-Ion Battery Modules with Series-Connected Cells

Amelie Krupp et al.

Summary: This study investigates the health state of lithium iron phosphate batteries and the challenge of applying incremental capacity analysis in practice. The research confirms the feasibility of evaluating battery series connections using ICA, and presents a method for identifying non-uniform aging states.

BATTERIES-BASEL (2021)

Review Chemistry, Multidisciplinary

Lithium-Oxygen Batteries and Related Systems: Potential, Status, and Future

Won-Jin Kwak et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Physical

Cobalt-Free High-Capacity Ni-Rich Layered Li[Ni0.9Mn0.1]O2 Cathode

Assylzat Aishova et al.

ADVANCED ENERGY MATERIALS (2020)

Article Energy & Fuels

A Study on the Influence of Lithium Plating on Battery Degradation

Upender Rao Koleti et al.

ENERGIES (2020)

Review Chemistry, Physical

Recent progress in developing Li2S cathodes for Li-S batteries

Shiqi Li et al.

ENERGY STORAGE MATERIALS (2020)

Article Green & Sustainable Science & Technology

Lithium-ion battery aging mechanisms and diagnosis method for automotive applications: Recent advances and perspectives

Rui Xiong et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Chemistry, Physical

How Comparable Are Sodium-Ion Batteries to Lithium-Ion Counterparts?

K. M. Abraham

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

Lithium-ion batteries - Current state of the art and anticipated developments

Michel Armand et al.

JOURNAL OF POWER SOURCES (2020)

Article Engineering, Chemical

Effects of charging rates on LiNi0.6Mn0.2Co0.2O2 (NMC622)/graphite Li-ion cells

Xianyang Wu et al.

Journal of Energy Chemistry (2020)

Review Electrochemistry

Degradation Mechanisms and Mitigation Strategies of Nickel-Rich NMC-Based Lithium-Ion Batteries

Tianyu Li et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Review Electrochemistry

Review-Lithium Plating Detection Methods in Li-Ion Batteries

Umamaheswari Janakiraman et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Fast charging of an electric vehicle lithium-ion battery at the limit of the lithium deposition process

Johannes Sieg et al.

JOURNAL OF POWER SOURCES (2019)

Article Electrochemistry

Modeling Overcharge at Graphite Electrodes: Plating and Dissolution of Lithium

Daniel R. Baker et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Review Electrochemistry

Automotive Li-Ion Batteries: Current Status and Future Perspectives

Yuanli Ding et al.

ELECTROCHEMICAL ENERGY REVIEWS (2019)

Article Electrochemistry

Capacity Fading Mechanisms of NCM-811 Cathodes in Lithium-Ion Batteries Studied by X-ray Diffraction and Other Diagnostics

Franziska Friedrich et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Review Materials Science, Multidisciplinary

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

Jianlin Li et al.

Article Chemistry, Physical

Electronic Structure and Comparative Properties of LiNixMnyCozO2 Cathode Materials

Hong Sun et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Chemistry, Physical

Degradation diagnostics for lithium ion cells

Christoph R. Birkl et al.

JOURNAL OF POWER SOURCES (2017)

Article Electrochemistry

Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Review Green & Sustainable Science & Technology

Can Li-Ion batteries be the panacea for automotive applications?

A. Opitz et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Chemistry, Physical

Ultrasonically treated liquid interfaces for progress in cleaning and separation processes

Darya Radziuk et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Article Energy & Fuels

Nonlinear aging of cylindrical lithium-ion cells linked to heterogeneous compression

Tobias C. Bach et al.

JOURNAL OF ENERGY STORAGE (2016)

Article Electrochemistry

Aging Analysis of Graphite/LiNi1/3Mn1/3Co1/3O2 Cells Using XRD, PGAA, and AC Impedance

Irmgard Buchberger et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Review Chemistry, Multidisciplinary

Aging Mechanisms of Electrode Materials in Lithium-Ion Batteries for Electric Vehicles

Cheng Lin et al.

JOURNAL OF CHEMISTRY (2015)

Article Energy & Fuels

Nonlinear aging characteristics of lithium-ion cells under different operational conditions

Simon F. Schuster et al.

JOURNAL OF ENERGY STORAGE (2015)

Article Chemistry, Physical

Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries

Sung-Kyun Jung et al.

ADVANCED ENERGY MATERIALS (2014)

Review Chemistry, Physical

A review on lithium-ion battery ageing mechanisms and estimations for automotive applications

Anthony Barre et al.

JOURNAL OF POWER SOURCES (2013)

Review Chemistry, Physical

Lithium Ion Battery Anode Aging Mechanisms

Victor Agubra et al.

MATERIALS (2013)

Article Electrochemistry

A mathematical model of stress generation and fracture in lithium manganese oxide

J Christensen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)