☆ 4.8 Review

Recent progress in use of MXene in perovskite solar cells: for interfacial modification, work-function tuning and additive engineering

NANOSCALE (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Constructing Monolithic Perovskite/Organic Tandem Solar Cell with Efficiency of 22.0% via Reduced Open-Circuit Voltage Loss and Broadened Absorption Spectra

Shucheng Qin et al.

Summary: The photovoltaic performance of perovskite/organic tandem solar cells has been improved by reducing nonradiative charge recombination and broadening the absorption spectra range. The overall efficiency of the monolithic TSC reaches 22.0%, showing promise for future commercialization.

ADVANCED MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

2D-MXene as an additive to improve the power conversion efficiency of monolithic perovskite solar cells

Satish Bykkam et al.

Summary: The study investigated the effect of adding 2D-MXene to perovskite solar cells, with the best device showing a 13.62% power conversion efficiency compared to 11.35% without 2D-MXene. This research utilized XRD, Raman spectroscopy, and FE-SEM to analyze the impact of 2D-MXene at different volume percentages.

MATERIALS LETTERS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

2D MXene: A Potential Candidate for Photovoltaic Cells? A Critical Review

Muhammad Ahsan Saeed et al.

Summary: The 2D MXenes are versatile materials for photovoltaic systems, with excellent properties such as metallic conductivity, optical transmittance, solution processability, work-function tunability, and hydrophilicity. This comprehensive review focuses on the synthesis methods and properties of MXenes and their use in PV systems. The effectiveness of Ti3C2Tx, a well-known MXene, as an additive and interfacial material in different types of PV cells, as well as its influence on the stability and performance of PV cells, are systematically examined. This study provides a comprehensive understanding of MXenes and sets the direction for future development in 2D material design and processing for PVs.

ADVANCED SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Amino-Functionalized Niobium-Carbide MXene Serving as Electron Transport Layer and Perovskite Additive for the Preparation of High-Performance and Stable Methylammonium-Free Perovskite Solar Cells

Jiankai Zhang et al.

Summary: In this work, 2D Nb2CTx MXene nanosheets were prepared and used as electron transport layer (ETL) materials in perovskite solar cells. By altering the surface groups of the MXene nanosheets, the work function was matched with the conduction band minimum of the perovskite layer, resulting in improved performance of the solar cells. Additionally, the incorporation of treated MXene nanosheets into the perovskite precursor helped in the formation of high-quality and oriented growth perovskite films, leading to higher power conversion efficiency (PCE). The flexible and large-area devices with MXene ETLs and additives achieved the highest PCE. Furthermore, the unencapsulated devices demonstrated good stability after long-term storage.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Chlorine-terminated MXene quantum dots for improving crystallinity and moisture stability in high-performance perovskite solar cells

Xiao (Xiao) Liu et al.

Summary: In this study, Cl-terminated Ti3C2 quantum dots were used as additives to improve the crystallinity and film orientation of perovskite films in n-i-p planar perovskite solar cells. The strong interaction between the Cl terminations of Ti3C2Clx QDs and Pb2+ ions resulted in a high-quality perovskite film with high crystallinity and fewer trap-states. Additionally, the Ti3C2Clx QDs improved charge extraction and band alignment between the electron transport layer and the perovskite layer, leading to enhanced device efficiency. Moreover, the Cl-terminated Ti3C2Clx QDs improved the humidity stability of the perovskite, enabling the unencapsulated device to maintain over 84% of its initial performance after aging.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

Development of MXene/WO3 embedded PEDOT:PSS hole transport layers for highly efficient perovskite solar cells and X-ray detectors

Sajjad Hussain et al.

Summary: In this study, a simple solution process was used to decorate WO3 nanoparticles on 2D conductive Ti3C2TX MXene sheets, forming MXene/WO3 hybrid structure, which was applied for the first time as the hole transport layer (HTL) in perovskite solar cells and X-ray detectors. The results showed that the perovskite solar cell with MXene/WO3/PEDOT: PSS HTL achieved a high power conversion efficiency, while the X-ray photodetector with MXene/WO3 blended HTL device exhibited superior sensitivity. The research findings revealed that the MXene/WO3 heterostructure effectively tuned the HTL/perovskite interface, facilitating charge extraction and shortest charge carrier lifetime.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Preparation and performance of perovskite solar cells with two dimensional MXene as active layer additive

Yingxue Li et al.

Summary: In this study, two-dimensional titanium carbide (Ti3C2Tx) and vanadium carbide (V2CTx) MXene were incorporated into PbI2 precursor solution to fabricate perovskite film. The effects of the MXene additives on the morphology, crystallinity, light absorption property, stability, and photovoltaic performance of the perovskite film and devices were investigated. The results showed that the addition of Ti3C2Tx and V2CTx improved the morphology, grain size, and hydrophobicity of the perovskite film, leading to improved photovoltaic performance and stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Spray deposition of vinyl tris(2-methoxyethoxy) silane-doped Ti3C2Tx MXene hole transporting layer for planar perovskite solar cells

Jian-Bo Du et al.

Summary: In this study, the interface distribution of Ti3C2Tx films was effectively modulated by incorporating a silane coupling agent, leading to improved hole transfer path and power conversion efficiency. The superior film formation quality of Ti3C2Tx further enhanced hole extraction and reduced transfer resistance at the HTL/perovskite interface, resulting in an increase in PCE.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Broadband plasmonic absorption enhancement of perovskite solar cells with embedded Au@SiO2@graphene core-shell nanoparticles

Hamideh Talebi et al.

Summary: In this paper, a proposal to incorporate Au@SiO2@Graphene nanoparticles as nano-photonic inclusions in perovskite solar cells is investigated. The results show that this improvement can significantly enhance the absorption rate and power conversion efficiency of the solar cells.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Synergic use of two-dimensional materials to tailor interfaces in large area perovskite modules

S. Pescetelli et al.

Summary: In the field of halide perovskite solar cells, interface engineering has been used to improve solar cell performance. In this study, the use of multi two-dimensional materials as intra and inter layers in mesoscopic PSCs has led to a significant boost in efficiency. The 2D materials-based structure has also been successfully extended to large area devices.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Polarity regulation for stable 2D-perovskite-encapsulated high-efficiency 3D-perovskite solar cells

Hang Su et al.

Summary: By designing specific molecular structures for passivators and optimizing the interactions between passivators and [PbI6](4-) octahedron, the efficiency and stability of perovskite solar cells have been significantly improved. By adjusting the molecular polarity of the passivator, a general passivation model has been established, enabling the solar cells to exhibit good reproducibility and long-term stability.

NANO ENERGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

A synergistic effect of the ion beam sputtered NiO x hole transport layer and MXene doping on inverted perovskite solar cells

Muhammad Faraz Ud Din et al.

Summary: The synergistic effect of high-quality NiO(x) hole transport layers and MXene-doped MAPI perovskite layers is investigated for improving the PCE of PSCs. The NiO(x) layers exhibited good performance and the MXene doping increased the size of MAPI grains, resulting in a significant enhancement in PCE.

NANOTECHNOLOGY (2022)

Add to Collection

Article Energy & Fuels

Additive MXene and dominant recombination channel in perovskite solar cells

Saeid Asgharizadeh et al.

Summary: Two-dimensional MXenes have promising applications in perovskite solar cells, as they can improve the photovoltaic efficiency by tuning the work function. The addition of MXene to the absorber layer reduces bulk recombination, while adding MXene to the ETL and ETL/absorber interface reduces interface recombination. Higher nid values are desirable in MXene cells and correlate with better cell performance.

SOLAR ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Surface engineering with oxidized Ti3C2Tx MXene enables efficient and stable p-i-n-structured CsPbI3 perovskite solar cells

Jin Hyuck Heo et al.

Summary: Surface engineering of the CsPbI3 layer with oxidized Ti3C2Tx MXene nanoplates via spray coatings resulted in highly efficient and stable p-i-n-structured CsPbI3 perovskite solar cells. The addition of OMXene provided a physical barrier against moisture and improved charge separation at the perovskite-electron transporting layer interface, leading to the demonstration of efficient CsPbI3/OMXene-based p-i-n devices with good stability.

JOULE (2022)

Add to Collection

Article Engineering, Environmental

Performance improvement of dye-sensitized double perovskite solar cells by adding Ti3C2Tx MXene

Lin Yang et al.

Summary: This study enhances the photovoltaic performance and long-term stability of Cs2AgBiBr6 perovskite solar cells by sensitizing the TiO2 electron transport layer with D149 indoline dye and introducing Ti3C2Tx MXene nanosheets.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Functionalized-MXene-nanosheet-doped tin oxide enhances the electrical properties in perovskite solar cells

Li Yin et al.

Summary: By using functionalized MXene nanosheets as dopants in the SnO2 ETL, this study achieved better band alignment, improved carrier transfer efficiency, significantly enhanced the performance and stability of photovoltaic devices.

CELL REPORTS PHYSICAL SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Tuning the reactivity of PbI2 film via monolayer Ti3C2Tx MXene for two-step-processed CH3NH3PbI3 solar cells

Yu Zhao et al.

Summary: In this study, 2D monolayer Ti3C2Tx MXene nanosheets were introduced into the PbI2 layer to enhance reactivity and convert it to perovskite efficiently. The Ti3C2Tx additive also improved the energy-level alignment of the perovskite and passivated defects effectively, leading to a champion power conversion efficiency of 19.27%.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Ceramics

2-D Mxene flakes as potential replacement for both TCO and Pt layers for Dye-Sensitized Solar cell

Muhammad Shakeel Ahmad et al.

Summary: This study investigated the use of MXene as a replacement for TCO and Pt in DSSC, achieving higher conversion efficiency than the standard CE at the optimal thickness. The MXene-based CE demonstrated high conductivity, abundant catalytic sites, and superior catalytic activity towards the electrolyte.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Chemistry, Physical

Metal Halide Perovskite/2D Material Heterostructures: Syntheses and Applications

Zhipeng Zhang et al.

Summary: The combination of metal halide perovskites and 2D materials has shown significant progress in the field of photovoltaics, but challenges remain in improving performance and stability. Different fabrication techniques provide diversity for their assembly, while also offering opportunities for rational design.

SMALL METHODS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Layered MXene Nanosheets Doping TiO2 for Efficient and Stable Double Perovskite Solar Cells

Zhenxing Li et al.

Summary: The study introduced a simple strategy of doping single-layered MXene nanosheets into titania as a multifunctional electron transport layer for Cs2AgBiBr6 double perovskite solar cells, significantly improving device performance and stability.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Review Environmental Sciences

Environmental impacts of solar energy systems: A review

Malek Kamal Hussien Rabaia et al.

Summary: The annual increases in global energy consumption and environmental concerns are driving the massive transmission of sustainable and renewable energy. Solar energy systems have been the focus of attention, but even renewable energies can have adverse environmental impacts. This paper discusses the environmental impacts of various solar energy systems and emphasizes the need for attention and precautionary measures.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A theoretical investigation of the effect of the hole and electron transport materials on the performance of a lead-free perovskite solar cell based on CH3NH3SnI3

Nicholas Rono et al.

Summary: This study theoretically investigated the impact of various HTL and ETL materials on lead-free perovskite solar cells based on methylammonium tin iodide. Through simulations, optimal combinations of HTL and ETL materials were identified to significantly enhance the power conversion efficiency of the solar cells.

JOURNAL OF COMPUTATIONAL ELECTRONICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient Two-Dimensional Perovskite Solar Cells Realized by Incorporation of Ti3C2Tx MXene as Nano-Dopants

Xin Jin et al.

Summary: 2D Ti3C2T MXene nanosheets with high electrical conductivity and mobility were used as a nanosized additive to enhance the performance of 2D perovskite films, resulting in improved crystallinity, orientation, and charge transfer speed, leading to increased efficiency of solar cells.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

MXenes for Solar Cells

Lujie Yin et al.

Summary: The application of two-dimensional MXene materials in photovoltaics has attracted attention for their unique properties, and this review focuses on the development and applications of Ti3C2Tx MXene in solar cells. Existing problems are discussed and suggestions for further exploration are provided to advance the research in this area.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on optoelectronic device applications of 2D transition metal carbides and nitrides

Xiwei Zhang et al.

Summary: MXenes, as a new branch of two-dimensional materials, are recognized for their distinguished and controllable optical and electronic properties, showcasing potential in optoelectronic device applications. This review outlines the unique properties of MXenes and recent advancements in utilizing them in optoelectronic devices, highlighting both challenges and opportunities for future research and development.

MATERIALS & DESIGN (2021)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

MXenes: Two-Dimensional Building Blocks for Future Materials and Devices

Yury Gogotsi et al.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

2D MXenes: Tunable Mechanical and Tribological Properties

Brian C. Wyatt et al.

Summary: MXenes, as two-dimensional materials, have wide applications in energy, electronics, sensors, etc., with their mechanical properties, flexibility, and strong adhesion playing key roles. Despite the critical nature of MXenes' performance, further exploration is needed in understanding their mechanical and tribological behavior.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hybridization of SnO2 and an In-Situ-Oxidized Ti3C2Tx MXene Electron Transport Bilayer for High-Performance Planar Perovskite Solar Cells

Lin Yang et al.

Summary: This study demonstrated that the introduction of O-Ti3C2Tx/SnO2 heterojunction can enhance the efficiency and stability of perovskite solar cells.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Nb2C MXenes modified SnO2 as high quality electron transfer layer for efficient and stability perovskite solar cells

Yingchun Niu et al.

Summary: This study for the first time introduces Nb2C MXenes as an external additive for SnO2 electron transfer layer, resulting in an improvement of performance and stability of perovskite solar cells. The champion power conversion efficiency achieved highlights the potential of modified electron transfer layers in enhancing the efficiency and durability of perovskite-based photoelectric conversion devices.

NANO ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

23.7% Efficient inverted perovskite solar cells by dual interfacial modification

Matteo Degani et al.

Summary: This study presents a dual interfacial modification approach by incorporating large organic cations at both the bottom and top interfaces of the perovskite active layer, leading to simultaneous improvement in both open-circuit voltage and fill factor of the devices, reaching a champion device efficiency of 23.7%. This dual interfacial modification is fully compatible with bulk modification of the perovskite active layer by ionic liquids, resulting in efficient and stable inverted architecture devices.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

MXene-Based Tailoring of Carrier Dynamics, Defect Passivation, and Interfacial Band Alignment for Efficient Planar p-i-n Perovskite Solar Cells

Venkata S. N. Chava et al.

Summary: This study utilizes titanium carbide MXene to improve the electronic properties of the electron transport layer (ETL) and ETL/perovskite interface in inverted perovskite solar cells, resulting in enhanced power conversion efficiency. MXene doping improves electrical conductivity and interface band alignment, leading to a higher PCE in the devices. Through various analyses, it is shown that the introduction of MXene in perovskite solar cells offers multiple benefits, including improved carrier transport, passivation, and trap state reduction, ultimately reinforcing the potential of MXene as a versatile material for high-performance electronic and optoelectronic devices.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Transition metal carbides (MXenes) for efficient NiO-based inverted perovskite solar cells

D. Saranin et al.

Summary: This work demonstrates the beneficial role of MXene doping in NiO-based inverted perovskite solar cells, improving charge extraction and collection efficiency to achieve superior performance. The ability to finely tune MXene work function during chemical synthesis and modify optoelectronic properties of PSC layers as dopant opens up countless possibilities for engineering inverted PSC structures.

NANO ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Plasma Oxidized Ti3C2Tx MXene as Electron Transport Layer for Efficient Perovskite Solar Cells

Jiming Wang et al.

Summary: Researchers utilized Ti3C2Tx MXene as the electron transport layer and conducted surface modification through oxygen plasma treatment. The treatment broke some Ti-C bonds, generating abundant Ti-O bonds and altering the surface properties of MXene, resulting in reduced trap states and improved electron transport. Contact angle and topography measurements were used to investigate the surface tension of MXene and the morphology of corresponding perovskite.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Physics, Applied

Modulate the work function of Nb2CTx MXene as the hole transport layer for perovskite solar cells

Jiankai Zhang et al.

Summary: This study modulated the work function of Nb2CTx HTL through oxygen plasma treatment, leading to increased hole transfer efficiency and reduced charge recombination in inverted PVSCs.

APPLIED PHYSICS LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Controlling the Defect Density of Perovskite Films by MXene/SnO2 Hybrid Electron Transport Layers for Efficient and Stable Photovoltaics

Huanhuan Zheng et al.

Summary: This study utilized a hybrid film of SnO2 nanoparticles and Ti3C2Tx MXene nanoflakes as the electron transport layer in PSCs, which effectively controlled the quality of the top perovskite layers by adjusting the Ti3C2Tx/SnO2 ratios, leading to reduced defect density and improved efficiency and stability of the devices.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Performance analysis of several electron/hole transport layers in thin film MAPbI3-based perovskite solar cells: A simulation study

Hamed Abnavi et al.

Summary: Various materials were investigated as potential hole/electron transfer layers in MAPbI3-based perovskite solar cells through numerical simulation, with CuAlTe2 HTL and ZnS ETL identified as the most suitable materials with the highest power conversion efficiencies under optimal conditions.

OPTICAL MATERIALS (2021)

Add to Collection

Editorial Material Materials Science, Ceramics

A decade of discovery: A review of MXenes, the family of 2D transition metal carbides and nitrides

Yury Gogotsi

AMERICAN CERAMIC SOCIETY BULLETIN (2021)

Add to Collection

Article Chemistry, Multidisciplinary

1D-2D Synergistic MXene-Nanotubes Hybrids for Efficient Perovskite Solar Cells

Abdulaziz S. R. Bati et al.

Summary: Incorporating 2D MXenes into the electron transporting layer of perovskite solar cells has been shown to deliver high-efficiency photovoltaic devices. By employing metallic single-walled carbon nanotubes to prepare composites, a power conversion efficiency of over 21% is achieved, demonstrating a new avenue for realizing high-performance PSCs.

SMALL (2021)

Add to Collection

Article Energy & Fuels

Methylammonium lead bromide based planar perovskite solar cells using various electron transport layers

R. Jeyakumar et al.

Summary: The study investigates the impact of MAPbBr3 thickness, energy band structure, and electrode work functions on the performance of solar cells. It was found that CdSe and PCBM are not suitable as ETLs, but PCBM as an ETL has less series resistance.

SOLAR ENERGY (2021)

Add to Collection

Article Energy & Fuels

In situ synthesis of Ti3C2Tx MXene/CoS nanocomposite as high performance counter electrode materials for quantum dot-sensitized solar cells

Xiaobo Chen et al.

Summary: Using MXene/CoS as a high electrocatalytic counter electrode in QDSSCs significantly enhances cell performance, mainly due to the synergistic effects of the unique layered morphology of conductive MXene nanosheets and cocatalysis with CoS nanoparticles, providing abundant catalytic active sites.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tailored Lattice Tape to Confine Tensile Interface for 11.08%-Efficiency All-Inorganic CsPbBr3 Perovskite Solar Cell with an Ultrahigh Voltage of 1.702 V

Qingwei Zhou et al.

Summary: The authors successfully reduced the superficial lattice tensile strain by incorporating Ti3C2Clx MXene into CsPbBr3 film, leading to improved efficiency of CsPbBr3 all-inorganic PSCs. They achieved a record high efficiency for this type of PSC and demonstrated stable performance under different environmental conditions.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Cesium-doped Ti3C2Tx MXene for efficient and thermally stable perovskite solar cells

Abdulaziz S. R. Bati et al.

Summary: Ti3C2Tx MXenes doped with cesium were prepared and introduced into lead iodide precursor solution for perovskite solar cells, leading to improved crystallization, larger crystal grains, reduced charge recombination, and high photovoltaic efficiency of up to 21.57% with excellent thermal stability. The incorporation of cesium-doped Ti3C2Tx paves the way for enhancing the performance and stability of perovskite solar cells by introducing dopants indirectly.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Air-stable MXene/GaAs heterojunction solar cells with a high initial efficiency of 9.69%

Zhijie Zhang et al.

Summary: A novel MXene/GaAs heterojunction solar cell with high efficiency and excellent stability was achieved via a one-step method. The high work function of transparent MXene and enhanced interfacial interaction with GaAs contribute to the formation of a high-quality Schottky diode, resulting in a record initial power conversion efficiency of 9.69%. With the deposition of a ZnS/MgF2 composite coating, the MXene/GaAs solar cell exhibited an average power conversion efficiency of 12.5% over 30 days in air, showing great promise for sustainable development.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Multidisciplinary Sciences

The world of two-dimensional carbides and nitrides (MXenes)

Armin Vahid Mohammadi et al.

Summary: MXenes, a family of two-dimensional materials, have diverse properties and wide-ranging applications in areas such as optics, catalysis, sensing, and medicine. Future research directions will focus on deepening the fundamental understanding of MXenes properties and exploring their potential for hybridization with other 2D materials.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Modulation of perovskite crystallization processes towards highly efficient and stable perovskite solar cells with MXene quantum dot-modified SnO2

Yingguo Yang et al.

Summary: The study explores the modulation of perovskite crystallization kinetics by nanocrystalline SnO2 layers, showing that MQDs-SnO2 layer can rapidly induce perovskite nucleation and improve the crystal quality and phase stability. With superior charge extraction properties, the corresponding PSCs achieved up to 23.3% steady-state power conversion efficiency and outstanding stability against humidity and light soaking.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Performance improvement of MXene-based perovskite solar cells upon property transition from metallic to semiconductive by oxidation of Ti3C2Tx in air

Lin Yang et al.

Summary: By oxidizing Ti3C2Tx, its properties can be adjusted for use as an electron transport layer in low-temperature processed perovskite solar cells (PSCs), resulting in improved energy conversion efficiency. Heavy oxidation of Ti3C2Tx reduces macroscopic defects in the film and transitions it from a metallic material to a semiconductor, leading to enhanced electron mobility and reduced electron-hole recombination for higher power conversion efficiency (PCE).

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Economics

PRIORITIZATION OF RENEWABLE SOLAR ENERGY TO PREVENT ENERGY INSECURITY: AN INTEGRATED ROLE

Robina Iram et al.

Summary: This study examines the site selection process and economic viability of solar energy projects in Pakistan, proposing multiple potential sites and highlighting the cost-effectiveness of solar energy systems compared to conventional energy sources. The findings could serve as a useful reference for other South Asian countries electrifying remote and rural areas through solar energy systems.

SINGAPORE ECONOMIC REVIEW (2021)

Add to Collection

Article Chemistry, Physical

MXenes: promising donor and acceptor materials for high-efficiency heterostructure solar cells

Yinggan Zhang et al.

Summary: The study comprehensively evaluates 64 two-dimensional MXenes through density functional theory calculations and identifies Zr2CO2 (Hf2CO2) and Ti2CO2 as promising donor and acceptor materials for solar cells. The heterostructures show a moderate band gap, high absorbance coefficient, and efficient electron-hole separation, leading to competitive photocurrents and high power conversion efficiencies, paving the way for the potential application of MXenes as photovoltaic materials.

SUSTAINABLE ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Physical

Emerging 2D Layered Materials for Perovskite Solar Cells

Abdulaziz S. R. Bati et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

2D Perovskite Sr2Nb3O10 for High-Performance UV Photodetectors

Siyuan Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Energy & Fuels

Hydrogen from solar energy, a clean energy carrier from a sustainable source of energy

Seyed Ehsan Hosseini et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Nonlinear Work Function Tuning of Lead-Halide Perovskites by MXenes with Mixed Terminations

Alessia Di Vito et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Perovskite solar cells: The new epoch in photovoltaics

S. A. Olaleru et al.

SOLAR ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

i-MXenes for Energy Storage and Catalysis

Bilal Ahmed et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

2D MXenes for Electromagnetic Shielding: A Review

Aamir Iqbal et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A 2D Titanium Carbide MXene Flexible Electrode for High-Efficiency Light-Emitting Diodes

Soyeong Ahn et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Rational Design of Porous N-Ti3C2 MXene@CNT Microspheres for High Cycling Stability in Li-S Battery

Jianli Wang et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Low-Temperature Growing Anatase TiO2/SnO2 Multi-dimensional Heterojunctions at MXene Conductive Network for High-Efficient Perovskite Solar Cells

Linsheng Huang et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Sandwich-Like Fe&TiO2@C Nanocomposites Derived from MXene/Fe-MOFs Hybrids for Electromagnetic Absorption

Baiwen Deng et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Review Chemistry, Applied

There is plenty of space in the MXene layers: The confinement and fillings

Ming Lu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Growth of MAPbBr3 Nanocrystals on Few-Layer MXene Nanosheets with Efficient Energy Transfer

Zhipeng Zhang et al.

SMALL (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Potential of MXenes in Water Desalination: Current Status and Perspectives

Ihsanullah Ihsanullah

NANO-MICRO LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Partial Atomic Tin Nanocomplex Pillared Few-Layered Ti3C2Tx MXenes for Superior Lithium-Ion Storage

Shunlong Zhang et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Enhancing Capacitance Performance of Ti3C2Tx MXene as Electrode Materials of Supercapacitor: From Controlled Preparation to Composite Structure Construction

Xiaobei Zang et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

TiO2 Nanoparticles In Situ Formed on Ti3C2 Nanosheets by a One-Step Ethanol-Thermal Method for Enhanced Reversible Lithium-Ion Storage

Lin Jia et al.

CHEMISTRYSELECT (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Scalable Ti3C2Tx MXene Interlayered Forward Osmosis Membranes for Enhanced Water Purification and Organic Solvent Recovery

Xing Wu et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Dual Interfacial Modification Engineering with 2D MXene Quantum Dots and Copper Sulphide Nanocrystals Enabled High-Performance Perovskite Solar Cells

Xu Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Alternating-Current MXene Polymer Light-Emitting Diodes

Seokyeong Lee et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Implementing Hybrid Energy Harvesting in 3D Spherical Evaporator for Solar Steam Generation and Synergic Water Purification

Yi Lu et al.

SOLAR RRL (2020)

Add to Collection

Article Chemistry, Physical

3D macroscopic graphene oxide/MXene architectures for multifunctional water purification

Xin Ming et al.

CARBON (2020)

Add to Collection

Article Multidisciplinary Sciences

Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes

Vladislav Kamysbayev et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Charge behavior modulation by titanium-carbide quantum dots and nanosheets for efficient perovskite solar cells

J. Ge et al.

MATERIALS TODAY ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MXene-Modulated Electrode/SnO2 Interface Boosting Charge Transport in Perovskite Solar Cells

Yunfan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Efficiency progress of inverted perovskite solar cells

Xuesong Lin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A review: crystal growth for high-performance all-inorganic perovskite solar cells

Weijie Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Bio-inspired transparent MXene electrodes for flexible UV photodetectors

Jiaxin Chen et al.

MATERIALS HORIZONS (2020)

Add to Collection

Article Chemistry, Physical

Interfacial engineering of a ZnO electron transporting layer using self-assembled monolayers for high performance and stable perovskite solar cells

Jinyoung Han et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Mo1.33C MXene-Assisted PEDOT:PSS Hole Transport Layer for High-Performance Bulk-Heterojunction Polymer Solar Cells

Yanfeng Liu et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Element Replacement Approach by Reaction with Lewis Acidic Molten Salts to Synthesize Nanolaminated MAX Phases and MXenes

Mian Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Exfoliation of Titanium Aluminum Carbide (211 MAX Phase) to Form Nanofibers and Two-Dimensional Nanosheets and Their Application in Aqueous-Phase Cadmium Sequestration

Asif Shahzad et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A MXene-Based Wearable Biosensor System for High-Performance In Vitro Perspiration Analysis

Yongjiu Lei et al.

SMALL (2019)

Add to Collection

Article Chemistry, Physical

MXene-Contacted Silicon Solar Cells with 11.5% Efficiency

Hui-Chun Fu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrathin Ti3C2Tx (MXene) Nanosheet-Wrapped NiSe2 Octahedral Crystal for Enhanced Supercapacitor Performance and Synergetic Electrocatalytic Water Splitting

Hanmei Jiang et al.

NANO-MICRO LETTERS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Conducting MXene-Silver Nanowire Transparent Electrodes for Flexible Organic Solar Cells

Honghao Tang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Surface-Modified Metallic Ti3C2Tx MXene as Electron Transport Layer for Planar Heterojunction Perovskite Solar Cells

Lin Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Climate and air-quality benefits of a realistic phase-out of fossil fuels

Drew Shindell et al.

NATURE (2019)

Add to Collection

Article Chemistry, Physical

Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells

A. Agresti et al.

NATURE MATERIALS (2019)

Add to Collection

Review Nanoscience & Nanotechnology

2D MXenes as Co-catalysts in Photocatalysis: Synthetic Methods

Yuliang Sun et al.

NANO-MICRO LETTERS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrathin and Flexible CNTs/MXene/Cellulose Nanofibrils Composite Paper for Electromagnetic Interference Shielding

Wentao Cao et al.

NANO-MICRO LETTERS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Electrostatic Self-assembly of 0D-2D SnO2 Quantum Dots/Ti3C2Tx MXene Hybrids as Anode for Lithium-Ion Batteries

Huan Liu et al.

NANO-MICRO LETTERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrochromic full-color MXene quantum dots through hydrogen bonding toward ultrahigh-efficiency white light-emitting diodes

Quan Xu et al.

APPLIED MATERIALS TODAY (2019)

Add to Collection

Review Chemistry, Analytical

Recent advances in MXene-based electrochemical sensors and biosensors

Pramod K. Kalambate et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Assembling 2D MXenes into Highly Stable Pseudocapacitive Electrodes with High Power and Energy Densities

Armin VahidMohammadi et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Alternative electrodes for HTMs and noble-metal-free perovskite solar cells: 2D MXenes electrodes

Junmei Cao et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

MXenes with tunable work functions and their application as electron- and hole-transport materials in non-fullerene organic solar cells

Zhimeng Yu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Applications of 2D MXenes in energy conversion and storage systems

Jinbo Pang et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection

Article Chemistry, Physical

Accelerating hole extraction by inserting 2D Ti3C2-MXene interlayer to all inorganic perovskite solar cells with long-term stability

Taotao Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Microstructure and surface control of MXene films for water purification

Xiuqiang Xie et al.

NATURE SUSTAINABILITY (2019)

Add to Collection

Article Chemistry, Physical

SnO2-Ti3C2 MXene electron transport layers for perovskite solar cells

Lin Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Metallic Ti3C2TX MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio

Seon Joon Kim et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Fluorine-Free Synthesis of High-Purity Ti3C2Tx (T=OH, O) via Alkali Treatment

Tengfei Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Forecasting the impact of renewable energies in competition with non-renewable sources

Claudia Furlan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Solar energy: Potential and future prospects

Ehsanul Kabir et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Article Chemistry, Physical

Surface Engineering of TiO2 ETL for Highly Efficient and Hysteresis-Less Planar Perovskite Solar Cell (21.4%) with Enhanced Open-Circuit Voltage and Stability

Mohammad Mahdi Tavakoli et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

The Marriage of the FeN4 Moiety and MXene Boosts Oxygen Reduction Catalysis: Fe 3d Electron Delocalization Matters

Zilan Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High open-circuit voltage in perovskite solar cells: The role of hole transport layer

David Ompong et al.

ORGANIC ELECTRONICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Electrically Conductive Three-Dimensional Ti3C2TX MXene/Reduced Graphene Oxide Hybrid Aerogels with Excellent Electromagnetic Interference Shielding Performances

Sai Zhao et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Electrical Conductivity 2D MXene Serves as Additive of Perovskite for Efficient Solar Cells

Zhanglin Guo et al.

SMALL (2018)

Add to Collection

Proceedings Paper Energy & Fuels

Fossil fuel energy consumption in European countries

Florinda Martins et al.

5TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT RESEARCH (ICEER 2018) (2018)

Add to Collection

Article Chemistry, Physical

Antisolvent-Derived Intermediate Phases for Low-Temperature Flexible Perovskite Solar Cells

Xin Zhang et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Review Engineering, Electrical & Electronic

Defects engineering for high-performance perovskite solar cells

Feng Wang et al.

NPJ FLEXIBLE ELECTRONICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Stretchable Ti3C2Tx MXene/Carbon Nanotube Composite Based Strain Sensor with Ultrahigh Sensitivity and Tunable Sensing Range

Yichen Cai et al.

ACS NANO (2018)

Add to Collection

Article Economics

Quantifying the co-impacts of energy sector decarbonisation on outdoor air pollution in the United Kingdom

Melissa C. Lott et al.

ENERGY POLICY (2017)

Add to Collection

Article Chemistry, Physical

Two-Dimensional Titanium Carbide (MXene) as Surface-Enhanced Raman Scattering Substrate

Asia Sarycheva et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Electrochemical etching of Ti2AlC to Ti2CTx (MXene) in low-concentration hydrochloric acid solution

W. Sun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Electronic properties and applications of MXenes: a theoretical review

Mohammad Khazaei et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2TX MXene)

Mohamed Alhabeb et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Antibacterial Activity of Ti3C2Tx MXene

Kashif Rasool et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Conductive Optical Quality Solution-Processed Films of 2D Titanium Carbide

Andrew D. Dillon et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and Characterization of 2D Molybdenum Carbide (MXene)

Joseph Halim et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)

Joseph Halim et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Intriguing Optoelectronic Properties of Metal Halide Perovskites

Joseph S. Manser et al.

CHEMICAL REVIEWS (2016)

Add to Collection

Review Physics, Applied

A discussion on the origin and solutions of hysteresis in perovskite hybrid solar cells

Dae Ho Song et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient phosphate sequestration for water purification by unique sandwich-like MXene/magnetic iron oxide nanocomposites

Qingrui Zhang et al.

NANOSCALE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of two-dimensional titanium nitride Ti4N3 (MXene)

Patrick Urbankowski et al.

NANOSCALE (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Solar energy for future world: - A review

Nadarajah Kannan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Large-scale delamination of multi-layers transition metal carbides and carbonitrides MXenes

Michael Naguib et al.

DALTON TRANSACTIONS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2

Zhengyang Li et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Large-area high-quality 2D ultrathin Mo2C superconducting crystals

Chuan Xu et al.

NATURE MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Vibrational properties of Ti3C2 and Ti3C2T2 (T = O, F, OH) monosheets by first-principles calculations: a comparative study

Tao Hu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Thickness of the hole transport layer in perovskite solar cells: performance versus reproducibility

Guan-Woo Kim et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Physical

Improving the TiO2 electron transport layer in perovskite solar cells using acetylacetonate-based additives

Hsin-Hua Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2

Zhengyang Li et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance

Meng-Qiang Zhao et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

One-step synthesis of nanocrystalline transition metal oxides on thin sheets of disordered graphitic carbon by oxidation of MXenes

Michael Naguib et al.

CHEMICAL COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Role of Surface Structure on Li-Ion Energy Storage Capacity of Two-Dimensional Transition-Metal Carbides

Yu Xie et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Multidisciplinary Sciences

Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance

Michael Ghidiu et al.

NATURE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Novel Electronic and Magnetic Properties of Two-Dimensional Transition Metal Carbides and Nitrides

Mohammad Khazaei et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Transition Metal Carbides

Michael Naguib et al.

ACS NANO (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Are MXenes Promising Anode Materials for Li Ion Batteries? Computational Studies on Electronic Properties and Li Storage Capability of Ti3C2 and Ti3C2X2 (X = F, OH) Monolayer

Qing Tang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

First principles study of two-dimensional early transition metal carbides

Murat Kurtoglu et al.

MRS COMMUNICATIONS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Add to Collection

Review Green & Sustainable Science & Technology

A review of solar thermal technologies

Mirunalini Thirugnanasambandam et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.