☆ 4.6 Article

Fast Shielding Optimization of an Inductive Power Transfer System for Electric Vehicles

IEEE ACCESS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Shielding Optimization of IPT System Based on Genetic Algorithm for Efficiency Promotion in EV Wireless Charging Applications

Haisen Zhao et al.

Summary: This study investigates the efficiency and loss changes of an inductive power transfer (IPT) system when equipped with a shielding structure. By analyzing the equivalent circuit model and establishing a 3-D model, the study proposes a practical method for optimizing the parameters of the aluminum shielding structure and presents a new efficiency calculation method to simplify the optimization process. The effectiveness of the proposed method is verified through experimental validation.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2022)

Add to Collection

Article Computer Science, Information Systems

Self and Mutual Inductance Behavioral Modeling of Square-Shaped IPT Coils With Air Gap and Ferrite Core Plates

Alberto Delgado et al.

Summary: This paper proposes a new method for designing and optimizing coils for Inductive Power Transfer (IPT) systems. By using empirical equations, the self-inductance and mutual inductance values can be obtained more quickly. The accuracy of this method is validated by comparing with experimental results.

IEEE ACCESS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Cost-Efficiency Optimization of Ground Assemblies for Dynamic Wireless Charging of Electric Vehicles

Reza Tavakoli et al.

Summary: This article proposes a cost-efficiency optimization algorithm for the design of a DWPT transmitter pad. The algorithm maximizes pad efficiency and minimizes cost to achieve constant power transfer on a selected road. Various analyses are conducted to evaluate the impact of different aspects of DWPT, and a specific design case is provided.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2022)

Add to Collection

Article Automation & Control Systems

Mutual Inductance Behavioral Modeling for Wireless Power Transfer System Coils

Giulia Di Capua et al.

Summary: This article derives low-complexity behavioral analytical models of mutual inductance between coupling coils of wireless power transfer systems, which are obtained through numerical analysis. The models ensure an optimal tradeoff between accuracy and complexity using a multiobjective genetic programming algorithm. These models enable accurate and fast evaluation of mutual inductance over a wide range of misalignment conditions, facilitating easier system analysis and optimization.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Analysis of Dynamic Wireless Power Transfer Systems Based on Behavioral Modeling of Mutual Inductance

Giulia Di Capua et al.

Summary: This paper presents a system-level approach for analyzing the performance of a dynamic Wireless Power Transfer System for electric vehicles, utilizing an analytical behavioral model which is validated against experimental data. The approach avoids the extensive use of computationally expensive 3D finite element simulations, providing a fast and accurate analysis of performance sensitivity. The system-level analysis assesses the sensitivity of power and efficiency of the WPTS to vehicle misalignment from the nominal trajectory during the dynamic charging process.

SUSTAINABILITY (2021)

Add to Collection

Review Engineering, Electrical & Electronic

Design, Challenges, and Trends of Inductive Power Transfer Couplers for Electric Vehicles: A Review

Sampath Jayalath et al.

Summary: The article discusses the importance and design requirements of magnetic couplers in inductive power transfer systems, introduces the challenges and trends in coil design methods and structural optimization, and proposes optimization methods and multi-objective optimization schemes for the coil design process.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Multiobjective Optimization of Inductive Power Transfer Double-D Pads for Electric Vehicles

Zhichao Luo et al.

Summary: This article proposes a multiobjective optimization method for improving the design of primary double-D pad in inductive power transfer systems. Optimization is performed through parametric sweep and genetic algorithms to balance coupling coefficient and minimize stray leakage magnetic fields. Design guidelines are extracted from optimization results, and the effectiveness of the optimized structures is validated through experimental setups.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Energy & Fuels

Optimal Coupler Topology for Dynamic Wireless Power Transfer for Electric Vehicle

Karim Kadem et al.

Summary: The increasing number of electric vehicles is attributed to the decrease in oil resources and the rise in greenhouse gas emissions. However, consumer acceptance is hindered by energy storage and charging limitations. The development of dynamic or in-motion charging solutions is crucial to resolving battery-related issues, with researchers and manufacturers striving for efficient charging systems.

ENERGIES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Comparison of Coupling Coils for Static Inductive Power-Transfer Systems Taking into Account Sources of Uncertainty

Yao Pei et al.

Summary: By comparing different coupling coils in terms of mutual inductance and sources of uncertainty, it was found that circular coupling coils are recommended for SIPT systems.

SUSTAINABILITY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Design and Performance Analysis of Misalignment Tolerant Charging Coils for Wireless Electric Vehicle Charging Systems

Eiman ElGhanam et al.

Summary: This study presents a systematic approach using Finite Element Method to design double-D charging coils, exploring the impact of different coil parameters on the coupling performance of the inductive link. Experimental validation shows that utilizing an additional quadrature coil on the secondary side can enhance the misalignment tolerance of the design.

WORLD ELECTRIC VEHICLE JOURNAL (2021)

Add to Collection

Article Physics, Multidisciplinary

Uncertainty quantification in the design of wireless power transfer systems

Yao Pei et al.

OPEN PHYSICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Comparison of Magnetic Couplers for IPT-Based EV Charging Using Multi-Objective Optimization

Soumya Bandyopadhyay et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2019)

Add to Collection

Article Automation & Control Systems

A New Coil Structure and Its Optimization Design With Constant Output Voltage and Constant Output Current for Electric Vehicle Dynamic Wireless Charging

Yong Li et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Loss Minimization Design of Ferrite Core in a DD-Coil-Based High-Power Wireless Charging System for Electrical Vehicle Application

Mostak Mohammad et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Conductive Layer Modeling by Improved Second-Order Artificial Material Single-Layer Method

S. Cruciani et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Coil Design Optimization of Power Pad in IPT System for Electric Vehicle Applications

Ahmed A. S. Mohamed et al.

IEEE TRANSACTIONS ON MAGNETICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Systematic Design of Coils in Series-Series Inductive Power Transfer for Power Transferability and Efficiency

Ming Lu et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Multi-Objective Optimization of Circular Magnetic Couplers for Wireless Power Transfer Applications

Tuba Yilmaz et al.

IEEE TRANSACTIONS ON MAGNETICS (2017)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

Multi-Objective Optimisation of a 1-kW Wireless IPT Systems for Charging of Electric vehicles

Soumya Bandyopadhyay et al.

2016 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE AND EXPO (ITEC) (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling and η-α-Pareto Optimization of Inductive Power Transfer Coils for Electric Vehicles

Roman Bosshard et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2015)

Add to Collection

Article Pharmacology & Pharmacy

An evaluation of R2 as an inadequate measure for nonlinear models in pharmacological and biochemical research: a Monte Carlo approach

Andrej-Nikolai Spiess et al.

BMC Pharmacology & Toxicology (2010)

Add to Collection

Article Automation & Control Systems

Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge

Jesus Sallan et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2009)

Add to Collection

Article Statistics & Probability

Least angle regression

B Efron et al.

ANNALS OF STATISTICS (2004)

Add to Collection

Article Computer Science, Artificial Intelligence

Handling multiple objectives with particle swarm optimization

CAC Coello et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2004)

Add to Collection

Review Engineering, Industrial

Latin hypercube sampling and the propagation of uncertainty in analyses of complex systems

JC Helton et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.