☆ 4.8 Article

Bismuth nanoparticles embedded in a carbon skeleton as an anode for high power density potassium-ion batteries

CHEMICAL SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Surface-substituted Prussian blue analogue cathode for sustainable potassium-ion batteries

Junmin Ge et al.

Summary: Aqueous potassium-ion batteries have emerged as a more sustainable technology to complement lithium-ion counterparts. Ge et al. engineer the surface of a potassium manganese hexacyanoferrate cathode material, achieving unprecedented electrochemical performance in full K-ion cells.

NATURE SUSTAINABILITY (2022)

Add to Collection

Article Engineering, Environmental

Potassium storage in bismuth nanoparticles embedded in N-doped porous carbon facilitated by ether-based electrolyte

Xi Liu et al.

Summary: In this study, high-performance potassium ion batteries were achieved by immobilizing Bi nanoparticles on N-doped porous carbon and matching with DME-based electrolyte. The precise control of Bi content and the unique porous nanostructure, along with the formed uniform SEI film, contribute to the excellent cycling stability and swift kinetics of the material.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Cyclic-anion salt for high-voltage stable potassium-metal batteries

Yanyao Hu et al.

Summary: This study demonstrates the use of cyclic anion electrolytes based on hexafluoropropane-1,3-disulfonimide to mitigate 'dead K' formation and enhance high-voltage stability in potassium-metal batteries. The strategy is also applicable to lithium and sodium-metal battery technologies.

NATIONAL SCIENCE REVIEW (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Stabilizing BiOCl/Ti3C2Tx hybrids for potassium-ion batteries via solid electrolyte interphase reconstruction

Zhichao Liu et al.

Summary: This study proposes a two-dimensional van der Waals heterostructure with bismuth oxychloride nanosheets anchored on MXene nanosheets, which improves the performance of anode materials for potassium-ion batteries through reasonable material design and electrolyte optimization. The composite material shows high reversible specific capacity and cycling stability, providing important insights for the development of stable high-performance PIB anodes.

INORGANIC CHEMISTRY FRONTIERS (2022)

Add to Collection

Review Chemistry, Physical

Organic electrolyte design for practical potassium-ion batteries

Jianfeng Mao et al.

Summary: Potassium-ion batteries (PIBs) are considered a low-cost and complementary technology to lithium-ion batteries (LIBs) due to the abundance of potassium. Electrolyte plays a crucial role in the electrochemical performance of PIBs. Recent research on electrolyte engineering has shown promising results, but there are still limitations for practical applications. Further analysis and improvement are necessary.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A review of hard carbon anode: Rational design and advanced characterization in potassium ion batteries

Hang Lei et al.

Summary: K-ion batteries (KIBs) have gained significant attention for their low cost, high operating voltage, and similarity to Li-ion batteries. This review focuses on the electrochemical reaction mechanism of hard carbons (HCs) in KIBs and summarizes approaches to improve the electrochemical performance of HC-based materials. The review also highlights advanced in situ characterization methods for understanding the evolutionary process of potassiation-depotassiation, essential for optimizing the electrochemical performance of KIBs.

INFOMAT (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges and Strategies toward Cathode Materials for Rechargeable Potassium-Ion Batteries

Shude Liu et al.

Summary: With increasing demand for grid-scale energy storage, potassium-ion batteries (PIBs) have emerged as promising complements or alternatives to commercial lithium-ion batteries. However, the low energy density and unstable cycle life of cathode materials are current challenges that need to be addressed in the development of next-generation PIBs.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Electrolytes and Interphases in Potassium Ion Batteries

Mengfan Zhou et al.

Summary: Potassium ion batteries are considered a promising candidate for future energy storage devices due to their cost-effectiveness, high-voltage, and high-power operation. In addition to electrode materials, electrolytes also play a crucial role in determining cell performance. This Progress Report summarizes the research progress of electrolytes in PIBs and provides comprehensive guidance on the design of electrolyte systems for high performance PIBs.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Unveiling Intrinsic Potassium Storage Behaviors of Hierarchical Nano Bi@N-Doped Carbon Nanocages Framework via In Situ Characterizations

Zehang Sun et al.

Summary: The study developed an optimized Bi@N-CNCs electrode that showed great reversible capacities and long-term cyclic stability at high rates, providing new possibilities for anode materials in potassium ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Applied

CuP2 as high-capacity and long-cycle-life anode for potassium-ion batteries

Lin Li et al.

Summary: A chemically bonded CuP2/C composite with a KFSI-based electrolyte showed improved reversible capacity, rate performance, and cycling stability for potassium-ion batteries, paving the way for high-performance CuP2 anodes in the future.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Low-Strain Potassium-Rich Prussian Blue Analogue Cathode for High Power Potassium-Ion Batteries

Lin Li et al.

Summary: This study introduces a low-strain potassium-rich cathode material KNiHCF for potassium ion batteries, which exhibits superior discharge capacity and cycling stability due to its low-strain de-/intercalation mechanism, intrinsic semiconductor property, and low potassium diffusion energy barrier.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Review Chemistry, Physical

Prospects of Electrode Materials and Electrolytes for Practical Potassium-Based Batteries

Ling Fan et al.

Summary: This review focuses on high-performance electrode materials and electrolytes for potassium-ion batteries (PIBs), evaluating their potential and challenges for market penetration. Discussions include the current status of PIBs in terms of safety, energy density, power density, cyclability, and sustainability, as well as future research directions for electrode materials, electrolytes, and electrode-electrolyte interfaces in order to commercialize potassium-based full batteries in the near future.

SMALL METHODS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Alloyed BiSb Nanoparticles Confined in Tremella-Like Carbon Microspheres for Ultralong-Life Potassium Ion Batteries

Chuyun Huang et al.

Summary: A novel nanoconfined BiSb@TCS structure is designed in this study, effectively addressing the capacity fading and poor rate performance issues of bismuth-antimony alloy in potassium ion batteries, showing outstanding storage performance and great potential as a high-performance anode for potassium ion batteries.

SMALL (2021)

Add to Collection

Article Energy & Fuels

National growth dynamics of wind and solar power compared to the growth required for global climate targets

Aleh Cherp et al.

Summary: The growth dynamics of renewable energy adoption vary between different countries in early and mature stages. While climate mitigation scenarios envision considerable growth of wind and solar energy, scholars disagree on how this growth compares with historical trends.

NATURE ENERGY (2021)

Add to Collection

Article Electrochemistry

Integration of homogeneous and heterogeneous nucleation growth via 3D alloy framework for stable Na/K metal anode

Shufen Ye et al.

Summary: In this study, a 3D-Na3Bi/3D-K3Bi alloy host is designed to promote the homogeneous and heterogeneous nucleation growth of sodium/potassium metal anodes. This design effectively prevents dendrite growth and improves cycle performance by addressing volume expansion issues during cycling. The experimental results demonstrate promising cycling lifespans and sustainable cycle performance for sodium/potassium metal anodes.

ESCIENCE (2021)

Add to Collection

Article Electrochemistry

In situ growth of ultra-thin perovskitoid layer to stabilize and passivate MAPbI3 for efficient and stable photovoltaics

Yanfeng Miao et al.

Summary: The in situ-growth of a perovskitoid TEAPbI(3) layer on 3D MAPbI(3) surface inhibits the migration of MA+ ions, improving the thermal and moisture stability of perovskite films. This also reduces trap states and accelerates photo-carrier diffusion, leading to enhanced efficiency and stability of perovskite solar cells.

ESCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

State-of-the-art anodes of potassium-ion batteries: synthesis, chemistry, and applications

Peng Li et al.

Summary: The growing demand for green energy has driven the exploration of sustainable and eco-friendly energy storage systems, with potassium-ion batteries (KIBs) emerging as a promising alternative to lithium-ion batteries. Key focus lies in the need to explore superior anode materials and overcome critical issues and challenges in KIB technology.

CHEMICAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Developing better ester- and ether-based electrolytes for potassium-ion batteries

Lin Li et al.

Summary: Potassium-ion batteries (PIBs) have drawn attention for their high abundance of potassium resources and low cost, but their electrochemical performance needs improvement. Electrolyte optimization is one of the most effective strategies to enhance PIBs, by adjusting solvation energy, energy levels, and oxidation resistance.

CHEMICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bismuth-Antimony Alloy Nanoparticle@Porous Carbon Nanosheet Composite Anode for High-Performance Potassium-Ion Batteries

Peixun Xiong et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Synthesis of Hierarchical Hollow CoP@C Composites with Superior Performance for Sodium and Potassium Storage

Qiannan Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Construction of Hierarchical Nanotubes Assembled from Ultrathin V3S4@C Nanosheets towards Alkali-Ion Batteries with Ion-Dependent Electrochemical Mechanisms

Yang Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Formation of Hierarchical Bismuth Nanodots/Graphene Nanoarchitectures for Ultrahigh-Rate and Durable Potassium-Ion Storage

Yuanxin Zhao et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

K-Ion Storage Enhancement in Sb2O3/Reduced Graphene Oxide Using Ether-Based Electrolyte

Jinliang Li et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Electrolyte Engineering Enables High Stability and Capacity Alloying Anodes for Sodium and Potassium Ion Batteries

Lin Zhou et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Understanding High-Rate K+-Solvent Co-Intercalation in Natural Graphite for Potassium-Ion Batteries

Lin Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Engineering, Environmental

Heteroatom-doped carbon inlaid with Sb2X3 (X = S, Se) nanodots for high-performance potassium-ion batteries

Li Yang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

The Features and Progress of Electrolyte for Potassium Ion Batteries

Yiwei Liu et al.

SMALL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A High-Performance Magnesium Triflate-based Electrolyte for Rechargeable Magnesium Batteries

Dan-Thien Nguyen et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Bismuth nanorod networks confined in a robust carbon matrix as long-cycling and high-rate potassium-ion battery anodes

Tianpeng Jiao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

A self-template approach to synthesize multicore-shell Bi@N-doped carbon nanosheets with interior void space for high-rate and ultrastable potassium storage

Xiuling Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Metal chalcogenides for potassium storage

Jingwen Zhou et al.

INFOMAT (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Large-Scale Fabrication of Egg-Carton-Inspired Bi/C Composite toward High Volumetric Capacity and Long-Life Lithium Ion Batteries

Haocheng Yuan et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Birnessite Nanosheet Arrays with High K Content as a High-Capacity and Ultrastable Cathode for K-Ion Batteries

Baowei Lin et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Graphite Anode for a Potassium-Ion Battery with Unprecedented Performance

Ling Fan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Ordered Macroporous Metal-Organic Framework Single Crystal-Derived Nitrogen-Doped Hierarchical Porous Carbon for High-Performance Potassium-Ion Batteries

Xuefeng Zhou et al.

NANO LETTERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Mesoporous Carbon-Coated Bismuth Nanorods as Anode for Potassium-Ion Batteries

Shihan Qi et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Bismuth Nanoparticle@Carbon Composite Anodes for Ultralong Cycle Life and High-Rate Sodium-Ion Batteries

Peixun Xiong et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Safe, Low-Cost, Fast-Kinetics and Low-Strain Inorganic-Open-Framework Anode for Potassium-Ion Batteries

Ruding Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enabling Superior Electrochemical Properties for Highly Efficient Potassium Storage by Impregnating Ultrafine Sb Nanocrystals within Nanochannel-Containing Carbon Nanofibers

Xufang Ge et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Reconstructed Orthorhombic V2O5 Polyhedra for Fast Ion Diffusion in K-Ion Batteries

Yun-Hai Zhu et al.

CHEM (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Multicore-Shell Bi@N-doped Carbon Nanospheres for High Power Density and Long Cycle Life Sodium- and Potassium-Ion Anodes

Hai Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly reversible potassium-ion intercalation in tungsten disulfide

Ruding Zhang et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Revealing the Origin of Improved Reversible Capacity of Dual-Shell Bismuth Boxes Anode for Potassium-Ion Batteries

Fangxi Xie et al.

MATTER (2019)

Add to Collection

Article Chemistry, Physical

From nanomelting to nanobeads: nanostructured SbxBi1-x alloys anchored in three-dimensional carbon frameworks as a high-performance anode for potassium-ion batteries

Xiao-Dong He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Bismuth nanospheres embedded in three-dimensional (3D) porous graphene frameworks as high performance anodes for sodium- and potassium-ion batteries

Xiaolong Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Physical

Recent Progress and Perspective in Electrode Materials for K-Ion Batteries

Haegyeom Kim et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin Titanate Nanosheets/Graphene Films Derived from Confined Transformation for Excellent Na/K Ion Storage

Cheng Zeng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Porous Network of Bismuth Used as the Anode Material for High-Energy-Density Potassium-Ion Batteries

Kaixiang Lei et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Hollow Carbon Architecture for High-Performance K-Ion Battery Anode

De-Shan Bin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Concentrated electrolytes stabilize bismuth-potassium batteries

Ruding Zhang et al.

CHEMICAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Bismuth Microparticles as Advanced Anodes for Potassium-Ion Battery

Jiaqiang Huang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Boosting the Potassium Storage Performance of Alloy-Based Anode Materials via Electrolyte Salt Chemistry

Qing Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Editorial Material Energy & Fuels

The challenge of carbon dioxide removal for EU policy-making

Vivian Scott et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Inside the Alloy Mechanism of Sb and Bi Electrodes for K-Ion Batteries

Vincent Gabaudan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Multidisciplinary Sciences

Boosting potassium-ion batteries by few-layered composite anodes prepared via solution-triggered one-step shear exfoliation

Yajie Liu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

An Ultrafast and Highly Stable Potassium-Organic Battery

Ling Fan et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Understanding High-Energy-Density Sn4P3 Anodes for Potassium-Ion Batteries

Wenchao Zhang et al.

JOULE (2018)

Add to Collection

Article Electrochemistry

Theoretical Analysis of Interactions between Potassium Ions and Organic Electrolyte Solvents: A Comparison with Lithium, Sodium, and Magnesium Ions

Masaki Okoshi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High K-storage performance based on the synergy of dipotassium terephthalate and ether-based electrolytes

Kaixiang Lei et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

A potassium-rich iron hexacyanoferrate/dipotassium terephthalate@carbon nanotube composite used for K-ion full-cells with an optimized electrolyte

Jiaying Liao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

© Peeref 2019-2024. All rights reserved.