☆ 4.6 Article

Undrained Stability of Unsupported Rectangular Excavations: Anisotropy and Non-Homogeneity in 3D

BUILDINGS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Vertical Uplift Capacity of Circular Anchors in Clay by Considering Anisotropy and Non-Homogeneity

Dang Khoa Nguyen et al.

Summary: The paper presents new numerical analyses on the vertical uplift capacity of circular anchors in anisotropic and non-homogenous clay. The analyses are based on lower and upper bound finite element limit analysis under an axisymmetric condition, using the AUS failure criterion and linear increase of undrained shear strength with depth. The effects of changing ratios between undrained shear strengths and anisotropic parameters on uplift factor and failure pattern are verified and investigated for improving engineering calculations in such conditions.

TRANSPORTATION INFRASTRUCTURE GEOTECHNOLOGY (2022)

Add to Collection

Article Engineering, Civil

Stability of active trapdoors in axisymmetry

Suraparb Keawsawasvong et al.

Summary: Trapdoor stability has been extensively studied in the field of tunneling engineering. The near-perfect circular shape of most sinkholes on the ground surface can be explained by numerical study and finite element limit analysis. This study focuses on the failure mechanisms of sinkholes in non-homogeneous clay with a linear increase of strength with depth, and presents a design equation for predicting stability solutions based on novel three-dimensional solutions using axisymmetry.

UNDERGROUND SPACE (2022)

Add to Collection

Article Engineering, Civil

Design equation for stability of a circular tunnel in anisotropic and heterogeneous clay

Suraparb Keawsawasvong et al.

Summary: The safety assessment of tunnel stability is crucial for tunnel construction. This study investigates the effects of undrained strength anisotropy and strength nonhomogeneity on the stability of unlined circular tunnels in clays. An approximate stability equation is proposed as a fast and accurate tool for predicting the undrained stability of this problem.

UNDERGROUND SPACE (2022)

Add to Collection

Article Construction & Building Technology

Three-dimensional stability analysis of active and passive trapdoors

Jim Shiau et al.

Summary: This study investigates the three-dimensional stability of circular and square trapdoors, considering collapse and blowout scenarios. Through comparison with other published results, key conclusions regarding critical stability numbers and factor of safety have been drawn.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

Add to Collection

Article Construction & Building Technology

Undrained stability of plane strain active trapdoors in anisotropic and non-homogeneous clays

Suraparb Keawsawasvong et al.

Summary: This paper presents new lower bound solutions for the active failure of trapdoors in clays with anisotropic strengths, utilizing second-order cone programming and finite element limit analysis. The undrained stability of the problem under plane strain conditions is investigated, and nonlinear regression analysis is employed to propose new design equations for estimating trapdoor stability. The effects of trapdoor roughness, cover-depth ratios, strength gradient ratios, and anisotropic strength ratios on trapdoor stability factors and failure mechanisms are also examined and discussed.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Damage zones induced by in situ stress unloading during excavation of diversion tunnels for the Jinping II hydropower project

Y. Fan et al.

Summary: This study analyzed the influence of stress unloading paths on the excavation damage zone (EDZ) in deep tunnel excavation using acoustic data analysis and numerical simulation. The results showed that transient unloading amplifies stress effects in surrounding rock masses, resulting in greater depths of the EDZ in blasting excavation tunnels compared to TBM excavation tunnels.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Engineering, Civil

Pipeline burst-related ground stability in blowout condition

Jim Shiau et al.

Summary: Sinkhole incidents have increased rapidly in recent decades due to water main breaks. This study focuses on the blowout stability of soils above damaged water main pipelines, presenting rigorous solutions using finite element limit analysis techniques.

TRANSPORTATION GEOTECHNICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Scale effects on the ultimate bearing capacity of rectangular footings placed on slopes

Shangchuan Yang et al.

Summary: The study investigates the scale effects of rectangular footings near slopes, finding that ignoring scale effects may lead to overly conservative design for bearing capacity. It also concludes that footing shape influences the observed failure mechanism, and a larger internal friction angle can amplify the observed bearing capacity scale effects.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Engineering, Civil

Finite element limit analysis of bearing capacity of footing on back-to-back reinforced soil retaining walls

Peng Xu et al.

Summary: This paper presents a numerical modeling study on the upper-bound bearing capacity of footing on back-to-back MSE walls using the FELA method. The influence of wall height on bearing capacity decreases with wall height, and using a full-length top reinforcement layer to connect the back-to-back walls is the most effective method to improve bearing capacity.

TRANSPORTATION GEOTECHNICS (2021)

Add to Collection

Article Engineering, Civil

Stability of Unsupported Conical Slopes in Hoek-Brown Rock Masses

Wittawat Yodsomjai et al.

Summary: This paper presents new plasticity stability solutions of unsupported conical rock slopes following the generalized Hoek-Brown failure criterion. A finite element limit analysis framework is used to investigate the stability of the slopes, considering four dimensionless parameters. Numerical solutions and design charts for the stability factor of the conical slopes are proposed, along with a discussion on the failure mechanism influenced by the parameters.

TRANSPORTATION INFRASTRUCTURE GEOTECHNOLOGY (2021)

Add to Collection

Article Engineering, Geological

End Bearing Capacity Factor for Annular Foundations Embedded in Clay Considering the Effect of the Adhesion Factor

Suraparb Keawsawasvong et al.

Summary: This paper presents new limit analysis solutions for the end bearing capacity of annular foundations in clay with linearly increasing shear strength. The end bearing capacity factor can be obtained based on dimensionless parameters including the ratio between internal and external radii, embedded depth ratio, and adhesion factor, through lower and upper bound finite element limit analysis. The collapse mechanisms of annular foundations in clay are examined to understand the effects of radius ratio, depth ratio, and adhesion factor.

INTERNATIONAL JOURNAL OF GEOSYNTHETICS AND GROUND ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Undrained Stability of Unsupported Conical Slopes in Anisotropic Clays Based on Anisotropic Undrained Shear Failure Criterion

Wittawat Yodsomjai et al.

Summary: This paper presents novel stability solutions for unsupported conical slopes in anisotropic clays using lower bound and upper bound finite element limit analyses under axisymmetric conditions. The anisotropic undrained shear (AUS) model is employed as a failure criterion, with parameters directly obtained from triaxial compression, triaxial extension, and direct simple shear tests. The stability solutions are based on the geometry and strengths of conical slopes in anisotropic clays, presented in dimensionless design charts, with consideration of anisotropy in the failure mechanisms.

TRANSPORTATION INFRASTRUCTURE GEOTECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Comparative investigation on deformation monitoring and numerical simulation of the deepest excavation in Beijing

Shuaidong Wang et al.

Summary: The study investigates the mechanical mechanism of retaining and protection structures in superdeep excavations, focusing on deformation control. By analyzing the stress and deformation characteristics of the retaining system during excavation, the research provides insights on controlling lateral displacement and maximizing rigidity to optimize the design and construction of superdeep excavations.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Engineering, Civil

Pullout Capacity Factor for Cylindrical Suction Caissons in Anisotropic Clays Based on Anisotropic Undrained Shear Failure Criterion

Suraparb Keawsawasvong et al.

Summary: This paper presents new plastic solutions for calculating the pullout capacity factor of cylindrical suction caissons in anisotropic clays. The effects of three dimensionless parameters on the pullout capacity are discussed, providing guidance for geotechnical engineers designing suction caissons considering the anisotropy effects of undrained shear strengths of clays.

TRANSPORTATION INFRASTRUCTURE GEOTECHNOLOGY (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Undrained stability of unsupported rectangular excavations in non-homogeneous clays

Boonchai Ukritchon et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Plasticity solution for the limit vertical pressure of a single rigid pile with a pile cap in soft soil

Hang Zhou et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Determination of critical tunnel heading pressures using stability factors

Jim Shiau et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Geological

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays

Boonchai Ukritchon et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2020)

Add to Collection

Article Engineering, Environmental

Design equation for stability of shallow unlined circular tunnels in Hoek-Brown rock masses

Suraparb Keawsawasvong et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)

Add to Collection

Article Engineering, Geological

Three-Dimensional Analysis of Circular Tunnel Headings Using Broms and Bennermark's Original Stability Number

Jim Shiau et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Stability Numbers for Unsupported Conical Excavations in Multi-Layered Cohesive Soils

Kwangwoo Lee et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Engineering, Civil

Undrained stability of unsupported conical slopes in two-layered clays

Wittawat Yodsomjai et al.

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2020)

Add to Collection

Article Engineering, Geological

Three-Dimensional Heading Stability of Twin Circular Tunnels

Jim Shiau et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Undrained Stability of Unlined Square Tunnels in Clays with Linearly Increasing Anisotropic Shear Strength

Boonchai Ukritchon et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Use of a non-associated flow rule for determining the stability of a vertical circular excavation

Debarghya Chakraborty

ACTA GEOTECHNICA (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Three-dimensional lower bound finite element limit analysis of an anisotropic undrained strength criterion using second-order cone programming

Boonchai Ukritchon et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Ocean

Design equations of uplift capacity of circular piles in sands

Boonchai Ukritchon et al.

APPLIED OCEAN RESEARCH (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Lower bound solutions for undrained face stability of plane strain tunnel headings in anisotropic and non-homogeneous clays

Boonchai Ukritchon et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Geological

AUS: Anisotropic undrained shear strength model for clays

Kristian Krabbenhoft et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Undrained basal stability of braced circular excavations in non-homogeneous clays with linear increase of strength with depth

Suraparb Keawsawasvong et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Civil

Three-dimensional stability analysis of the collapse pressure on flexible pavements over rectangular trapdoors

Boonchai Ukritchon et al.

TRANSPORTATION GEOTECHNICS (2019)

Add to Collection

Article Engineering, Geological

A new design equation for drained stability of conical slopes in cohesive-frictional soils

Boonchai Ukritchon et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Stability of unsupported conical excavations in non-homogeneous clays

Suraparb Keawsawasvong et al.

COMPUTERS AND GEOTECHNICS (2017)

Add to Collection

Article Engineering, Geological

Finite element analysis of undrained stability of cantilever flood walls

Suraparb Keawsawasvong et al.

INTERNATIONAL JOURNAL OF GEOTECHNICAL ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Generalised Tresca criterion for undrained total stress analysis

K. Krabbenhoft et al.

GEOTECHNIQUE LETTERS (2015)

Add to Collection

Article Engineering, Geological

Stability of Unsupported Vertical Circular Excavations

Jyant Kumar et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2014)

Add to Collection

Article Engineering, Geological

Geotechnical stability analysis

S. W. Sloan

GEOTECHNIQUE (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Stability numbers for an unsupported vertical circular excavation in c-φ soil

Jyant Kumar et al.

COMPUTERS AND GEOTECHNICS (2012)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Stability of an unsupported vertical circular excavation in clays under undrained condition

Vishwas N. Khatri et al.

COMPUTERS AND GEOTECHNICS (2010)

Add to Collection

Article Engineering, Multidisciplinary

Mesh adaptive computation of upper and lower bounds in limit analysis

H. Ciria et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.