☆ 4.7 Article

Enhanced degradation of 4-Cholophenol by activation of peroxymonosulfate with Fe-MOF@Mn2O3: Performance and mechanism

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Mesoporous carbon framework supported Cu-Fe oxides as efficient peroxymonosulfate catalyst for sustained water remediation

Gen Wang et al.

Summary: A mesoporous carbon framework supported Cu-Fe oxides catalyst was synthesized via green synthesis for the degradation of organic pollutant BPA. The catalyst showed excellent efficiency in PMS activation, enabling fast and sustained removal of BPA in water at neutral pH. This study demonstrates a reliable method for the rational design of hybrid catalysts for efficient wastewater remediation.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Ultrafine-Mn2O3@N-doped porous carbon hybrids derived from Mn-MOFs: Dual-reaction centre catalyst with singlet oxygen-dominant oxidation process

Zhiqun Xie et al.

Summary: The ultrafine Mn2O3@N-doped porous carbon hybrids [Mn2O3@NC] derived from Mn-MOFs demonstrated high mineralization of BPA by utilizing dual-reaction centers for radical recombination and electron transfer, facilitating effective degradation of organic pollutants.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Facilitating Redox Cycles of Copper Species by Pollutants in Peroxymonosulfate Activation

Xueyue Mi et al.

Summary: The redox behavior of metal active sites plays a significant role in the rate of peroxymonosulfate activation catalyzed by metals. Previous studies have focused on developing catalysts that enhance interfacial electron transfer. This study proposes a new strategy for facilitating the valence cycles of Cu+/Cu2+ by utilizing pollutants. The 2.5Cu/CeO2/PMS system demonstrates efficient removal of pollutants over a wide pH range and exhibits excellent sustainability and selectivity for the removal of organic pollutants.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Co3O4-MnO2 nanoparticles moored on biochar as a catalyst for activation of peroxymonosulfate to efficiently degrade sulfonamide antibiotics

Zhuo-Rui Jiang et al.

Summary: Co3O4-MnO2/BC, as an activated of PMS, shows efficient performance and superior stability in decomposing soluble sulfonamide antibiotics.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Novel porous Mn-Fe nanocubes toward peroxymonosulfate activation via non-radical/radical pathways for emerging contaminants degradation

Li Li et al.

Summary: Novel porous Mn-Fe nanocubes with abundant oxygen vacancies were synthesized through annealing at H-2 atmosphere for the first time. They exhibited excellent performance for the degradation of bisphenol A and the possible degradation pathways were proposed.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Defect modulation of MOF-derived ZnFe2O4/CNTs microcages for persulfate activation: Enhanced nonradical catalytic oxidation

Huachun Lan et al.

Summary: There has been increasing interest in combining porous metal organic frameworks (MOFs) with conductive carbonaceous materials to enhance catalytic activity. In this study, a simple strategy was developed to synthesize a highly efficient and recyclable heterogeneous catalyst through the pyrolysis of MOFs as sacrificial templates. The introduction of defective sites in the carbon nanotubes (CNTs) precursor significantly improved the charge transfer capability of the composite microcages and the coordination environment of Fe centers. With the assistance of persulfate oxidants, the modulated defects in ZnFe2O4/CNTs-Ar exhibited a 17.5-fold higher reaction rate for Bisphenol A degradation compared to blank ZnFe(2)O(4) microcages. Experimental characterizations indicated that the defective CNTs facilitated the electron transfer from BPA molecules to persulfate, triggering the direct decomposition of pollutants through a non-radical oxidation pathway. This research provides a new strategy for developing high-performance MOFs-derived catalysts for wastewater treatment.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Removal of high-concentration 4-Chlorophenol (4-CP) in wastewater using carbon-based heterogeneous catalytic oxidation: Performance and mechanism

Yanqiong Wang et al.

Summary: The heterogeneous Fenton system initiated by carbon based iron material (HACO-P) was successfully applied to degrade high concentration 4-CP wastewater, achieving more efficient and economical treatment. The proposed degradation and dechlorination pathways of 4-CP, as well as the toxicity assessment on zebrafish, provide important references for further research.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Curcumin-loaded Fe-MOF/PDMS porous scaffold: Fabrication, characterization, and biocompatibility assessment

Soghra Nikpour et al.

Summary: This study reports the preparation and structural investigation of a curcumin-loaded Fe(II) metal-organic framework/polydimethylsiloxane sponge. Various techniques were used to analyze the fabricated materials, confirming the successful incorporation of curcumin and Fe-MOF into the PDMS matrix. The experimental results suggest that the sponge scaffold has great potential in tissue engineering.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Add to Collection

Article Engineering, Environmental

WS2-cocatalyzed peroxymonosulfate activation via an enhanced Fe(III)/Fe(II) cycle toward efficient organic pollutant degradation

Yundan Chen et al.

Summary: This study reports a transition metal sulfide-enhanced PMS activation method, which achieves efficient degradation of BPA by improving the Fe(III)/Fe(II) cycle through the co-catalytic effect of metal sulfides. Among the considered metal sulfide co-catalyzed PMS systems, the WS2/Fe(II)/PMS system showed the best degradation efficiency for BPA. WS2 exhibited excellent reusability and can be extended to degrade other refractory organic pollutants and treat actual leachate.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

ZIF-derived CoFe2O4/Fe2O3 combined with g-C3N4 as high-efficient photocatalysts for enhanced degradation of levofloxacin in the presence of peroxymonosulfate

Pengyao Guo et al.

Summary: In this study, a novel ZIF-derived CoFe2O4/Fe2O3@g-C3N4 composite was prepared, and its excellent photocatalytic performance for levofloxacin degradation was demonstrated.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Engineering, Environmental

Activation of peroxymonosulfate by MnO2 with oxygen vacancies: Degradation of organic compounds by electron transfer nonradical mechanism

Yuhui Deng et al.

Summary: Recent studies have shown that the introduction of oxygen vacancies in MnO2 materials can greatly enhance the adsorption capacity of the material for PMS, leading to the formation of more favorable reactive complexes in the electron transfer mechanism. Additionally, the V-o-MnO2/PMS system has significantly improved the degradation efficiency of pollutants, highlighting the important role of oxygen vacancies in the electron transfer mechanism and providing a new method for practical application in wastewater treatment.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

Modulated construction of Fe-based MOF via formic acid modulator for enhanced degradation of sulfamethoxazole:Design, degradation pathways, and mechanism

Jian Sun et al.

Summary: Metal-organic frameworks (MOFs) have been studied for their excellent environmental catalytic capabilities. In this study, a modulation approach using formic acid as a modulator was successfully used to synthesize Fe-based MOFs. The modulated FeMOFs-2 sample showed high specific surface area and catalytic activity, effectively degrading SMX with almost 95% removal efficiency. The addition of formic acid induced the formation of more coordinatively unsaturated metal sites in the catalyst, resulting in structural defects and increased catalytic performance.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Environmental Sciences

Targeted degradation of dimethyl phthalate by activating persulfate using molecularly imprinted Fe-MOF-74

Su Ding et al.

Summary: The adsorptive and catalytic properties of Fe-based metalorganic framework (Fe-MOF-74) have been improved by molecular imprinting technique for enhanced selective adsorption of DMP. The material showed dominating chemisorption and a 1.5-fold increase in catalytic rate after modification. The synergy of adsorption and catalysis resulted in effective degradation of DMP with three proposed degradation pathways.

CHEMOSPHERE (2021)

Add to Collection

Article Chemistry, Physical

High performance of the A-Mn2O3 nanocatalyst for persulfate activation: Degradation process of organic contaminants via singlet oxygen

Aimal Khan et al.

Summary: The study demonstrated that AMn(2)O(3) nanocatalyst showed the highest efficiency in activating persulfate for degradation of organic contaminants, mainly producing singlet oxygen (O-1(2)) as the primary reactive oxygen species. Inner-sphere interactions were proposed as the mechanism for the decomposition of persulfate and subsequent generation of ROS.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Catalytic degradation and mineralization mechanism of 4-chlorophenol oxidized by phosphomolybdic acid/H2O2

Min Lei et al.

Summary: A catalytic system using PMA and H2O2 was developed for degrading 4-CP, resulting in complete conversion of 4-CP into other AOX and CO2/H2O, with PMA promoting free radical formation and showing exceptional efficiency in 4-CP degradation.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Accelerating Fe(III)/Fe(II) cycle via Fe(II) substitution for enhancing Fenton-like performance of Fe-MOFs

Taoyu Yang et al.

Summary: The Fenton-like performance of Fe-MOFs was improved by manipulating the structure of iron-oxo nodes with Fe(II) substitution, resulting in a material with stronger active sites and higher density of Fe(III) coordinatively unsaturated iron centers. This enhancement facilitated the rapid activation of H2O2 and efficient degradation of pollutants.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Engineering, Environmental

Activation of persulfate by molecularly imprinted Fe-MOF-74@SiO2 for the targeted degradation of dimethyl phthalate: Effects of operating parameters and chlorine

Su Ding et al.

Summary: This work investigated the targeted degradation of DMP using a novel functioned metal-organic framework catalyst for PS activation. The Fe-MOF-74@SiO2@MIP catalyst showed excellent capability, high selectivity, and efficient performance in DMP degradation. Findings also included the presence of SO4•- radicals during the catalysis, the inhibitory effect of increased catalyst loading on DMP elimination, and the promotion of DMP degradation by coexisting chloride ions at a specific concentration.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Environmental Sciences

Removal of chlorophenols in the aquatic environment by activation of peroxymonosulfate with nMnOx@Biochar hybrid composites: Performance and mechanism

Tong Liu et al.

Summary: Functional nMnOx@RBC composites were synthesized via a simple co-precipitation method, showing efficient activity in removing chlorophenols. The nanomaterials exhibited superior catalytic and adsorption properties, with singlet oxygen playing a dominant role in the degradation of 4-chloro-3-methyl phenol within the nMnOx@RBC system. This research aims to provide new insights into carbon-metal nanomaterials for the elimination of emerging pollutants.

CHEMOSPHERE (2021)

Add to Collection

Article Engineering, Environmental

Revisiting the Graphitized Nanodiamond-Mediated Activation of Peroxymonosulfate: Singlet Oxygenation versus Electron Transfer

Penghui Shao et al.

Summary: Experimental and theoretical studies show that the activity of nanodiamonds is influenced by the degree of graphitization, with intensified surface graphitization altering the degradation mechanism. A self-constructed time-resolved phosphorescence detection system was used for the first time to provide direct evidence of singlet oxygen production in the PMS-based system.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Activating peroxydisulfate with Co3O4/NiCo2O4 double-shelled nanocages to selectively degrade bisphenol A - A nonradical oxidation process

Meimei Wang et al.

Summary: In this study, a Co3O4/NiCo2O4 double-shelled nanocage was fabricated and used as a catalyst for the degradation of BPA by activating PDS, showing superior performance. The double shelled hollow structure helped increase the concentration of reactants and promote the decomposition of BPA. The research indicated that MOF-derived nanomaterials with a hollow structure have promising application prospects in oxidation technology.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Engineering, Environmental

Solid-state synthesis of cobalt ferrite fitted with gamma-Fe2O3-containing nanocage for peroxymonosulfate activation and cobalt leaching control

Xiaojie Qiu et al.

Summary: A solid-state synthesis procedure for the facile fabrication of N-doped cobalt ferrite was developed, along with a surface ferric coagulation-thermal treatment process to minimize cobalt leaching. The gamma-Fe2O3-containing nanocage with cation vacancies effectively inhibited cobalt leaching during the degradation process. The N-CoFeO@Fex exhibited superior performance for bisphenol A degradation, with both radical and non-radical pathways involved.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

New insights into stoichiometric efficiency and synergistic mechanism of persulfate activation by zero-valent bimetal (Iron/Copper) for organic pollutant degradation

Liping Fang et al.

Summary: Extensive studies have been conducted on the catalytic efficiency of zero-valent iron-based bimetals with persulfate, but little is known about the stoichiometric efficiency, underlying mechanisms, and reaction centers of these catalysts. This study investigated nanoscale zero-valent Fe/Cu catalysts in decomposing 2,4-dichlorophenol, revealing that Cu is likely the predominant reaction center over Fe. The findings shed light on the stoichiometric efficiency and reaction centers of Fe/Cu catalysts in activating PS for pollutant removal.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Fe-based Fenton-like catalysts for water treatment: Catalytic mechanisms and applications

Jianlong Wang et al.

Summary: Fenton reaction utilizes hydroxyl radicals generated by ferrous iron and hydrogen peroxide for degradation of emerging contaminants in water, while Fenton-like reaction uses solid catalysts instead of dissolved Fe2+ to overcome drawbacks. This review systematically summarizes various Fe-based Fenton-like catalysts, discusses their catalytic mechanisms and applications for degradation of emerging contaminants, and highlights their potential for removing toxic organic pollutants from water and wastewater.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Physical

Morphology-controlled synthesis of metal-organic frameworks derived lattice plane-altered iron oxide for efficient trifunctional electrocatalysts

Yangdi Niu et al.

Summary: The competitive coordination strategy allows for the control of the morphology and structure of MOFs derivatives, paving an innovative and feasible pathway for tailored catalytic centers towards electrochemical energy storage and conversion.

NANO ENERGY (2021)

Add to Collection

Article Engineering, Environmental

Enhanced degradation of tetrabromobisphenol A by magnetic Fe3O4@ZIF-67 composites as a heterogeneous Fenton-like catalyst

Mantang Chen et al.

Summary: Fe3O4@ZIF-67 composites were used as heterogeneous catalysts to activate peroxymonosulfate (PMS) for the degradation of TBBPA. The synergistic catalytic effect between Fe3O4 and ZIF-67 in Fe3O4@ZIF-67 enhanced the degradation of TBBPA and showed good recyclability by magnetic separation.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Bimetal-organic frameworks with coordinatively unsaturated metal sites for highly efficient Fenton-like catalysis

He Liang et al.

Summary: Recently, a new Fenton-like catalyst, CUMSs/MIL-101(Fe, Cu), with mixed valence of Fe(II)/Fe(III) and Cu(I)/Cu(II) as coordinatively unsaturated metal sites has been successfully synthesized and demonstrated enhanced degradation performance for ciprofloxacin compared to single iron catalyst in the neutral pH range. This work provides a new strategy for designing highly efficient, stable, and eco-friendly Fenton-like catalysts for superior environmental remediation efficiency across a wide pH range.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Environmental Sciences

Nano-porous bimetallic CuCo-MOF-74 with coordinatively unsaturated metal sites for peroxymonosulfate activation to eliminate organic pollutants: Performance and mechanism

Huanxuan Li et al.

Summary: In this study, CuCo-MOF-74 was synthesized and shown to exhibit high activity for methylene blue (MB) removal at low dosage, with the effects of various factors and catalytic mechanisms evaluated.

CHEMOSPHERE (2021)

Add to Collection

Article Engineering, Environmental

Persulfate Oxidation of Sulfamethoxazole by Magnetic Iron-Char Composites via Nonradical Pathways: Fe(IV) Versus Surface-Mediated Electron Transfer

Jun Liang et al.

Summary: This study developed two efficient magnetic iron-char composites and investigated the efficacy of nonradical pathways for PS activation in degrading SMX. The BCFe-400/PS system showed high stability and efficiency in continuous degradation of SMX, while the BCFe-700/PS system displayed recovered reactivity after thermal treatment. Both systems exhibited high performances for SMX removal in various water matrices, highlighting the great merits of nonradical activation methods.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Greatly enhanced oxidative activity of 8-MnO2 to degrade organic pollutants driven by dominantly exposed {?111} facets

Zhiqiang Wang et al.

Summary: The research showed that the crystal facet {? 111} of 8-MnO2 significantly enhanced the oxidative degradation activity towards organic pollutants, such as phenol, in water. This was attributed to the high density of Mn3+ ions on the {? 111} facet, which promoted direct oxidative capacity and generation of superoxide radical (O2??). The study also revealed a synergistic effect between non-radical and radical reactions, leading to greatly increased oxidative activity of 8-MnO2-{? 111}.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Peroxymonosulfate activation by α-MnO2/MnFe2O4 for norfloxacin degradation: Efficiency and mechanism

Lv Si Xu et al.

Summary: In this study, a Fe-Mn bimetallic catalyst was developed for the degradation of Norfloxacin, exploring optimal operational conditions. Characterization tests were conducted to study the morphology, crystal structure, and metal-binding properties of the catalyst, shedding light on the catalytic mechanism and ion circulation. The results provide insights for improving the efficiency of Norfloxacin degradation.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

Add to Collection

Article Engineering, Chemical

Yolk-shell Fe3O4@MOF-5 nanocomposites as a heterogeneous Fenton-like catalyst for organic dye removal

Ruixia Yang et al.

Summary: The yolk-shell Fe3O4@MOF-5 nanocomposites exhibited excellent catalytic performance, high specific surface area, superparamagnetic behavior, and remarkable stability in pollutant solutions.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Degradation of aqueous organic pollutants using an Fe2O3/WO3 composite photocatalyst as a magnetically separable peroxymonosulfate activator

Nguyen Thi Thao Nguyen et al.

Summary: This study developed a cost-effective method for separating and recovering nanomaterials for water treatment using magnetically separable iron oxide/tungsten oxide composites. The Fe2O3/WO3 composite with a specific ratio was found to be optimal for PMS activation, efficiently degrading various organic pollutants under visible light irradiation. Additionally, complete degradation of 4-chlorophenol was achieved for up to five cycles when the Fe2O3/WO3 composite was reused after recovery using a magnet.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

High-efficiency degradation of bisphenol A by heterogeneous Mn-Fe layered double oxides through peroxymonosulfate activation: Performance and synergetic mechanism

Li Li et al.

Summary: The Mn-Fe bimetal catalyst showed excellent activation properties in degrading BPA and COD efficiently, along with outstanding reusability and stability. The synergistic effect and electron transfer between Mn and Fe, as well as the importance of surface hydroxyl groups for promoting electron transfer, were confirmed through experiments and analyses. The presence of Mn and Fe active sites and hydroxyl groups on the Mn-Fe LDO surface efficiently promoted electron transfer, accelerating the redox cycles and generating main radicals for the degradation process.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Insights into the multiple mechanisms of chlorophenols oxidation via activating peroxymonosulfate by 3D N-doped porous carbon

Jihong Xu et al.

Summary: This study focuses on the transformation of graphite carbon nitride into a high nitrogen-doped three-dimensional carbon material for efficient removal of 2,4-dichlorophenol via peroxymonosulfate activation. The synthesized N-CM exhibited high removal efficiency under neutral conditions. Mechanism investigation revealed the important roles of graphitic nitrogen, electron-rich ketonic groups, and defects in PMS activation by nitrogen-doped carbon materials. Analysis of byproducts showed the predominant formation of small-molecule acids, H2O, and CO2.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Environmental Sciences

Facilitated Activation of Peroxymonosulfate by Loading ZIF-8 on Fe3O4-MnO2 for Deep Mineralization of Bisphenol A

Limei Dong et al.

Summary: The hierarchically structured Fe3O4-MnO2-ZIF-8 composite was successfully synthesized and applied for the first time to activate peroxymonosulfate (PMS) for the degradation of bisphenol A (BPA) and other organic pollutants. The composite showed highly efficient catalytic activity and convenient recyclability for BPA degradation, as well as excellent removal capability for various organic pollutants. The mechanism of PMS activation, intermediates in BPA degradation, and possible degradation pathway were investigated, demonstrating the high efficiency of Fe3O4-MnO2-ZIF-8 as a catalytic material for pollutant removal in water.

ACS ES&T WATER (2021)

Add to Collection

Article Chemistry, Physical

Core-shell magnetic Fe3O4@Zn/Co-ZIFs to activate peroxymonosulfate for highly efficient degradation of carbamazepine

Zelin Wu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Complete dechlorination and mineralization of para-chlorophenol (4-CP) in a hydrogen-based membrane biofilm reactor (MBfR)

Min Long et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Chemistry, Physical

One-step synthesis of Mn-doped MIL-53(Fe) for synergistically enhanced generation of sulfate radicals towards tetracycline degradation

Jun Yu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Article Engineering, Environmental

Oxidation of bisphenol A by persulfate via Fe3O4-α-MnO2 nanoflower-like catalyst: Mechanism and efficiency

Zhengyu Dong et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Environmental

Insights on the pH-dependent roles of peroxymonosulfate and chlorine ions in phenol oxidative transformation

Chen-Xuan Li et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Electrochemistry

The electrocatalytic oxidation of urea on nickel-graphene and nickel-graphene oxide composite electrodes

Ewelina Urbanczyk et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Environmental Sciences

Interactions between chlorophenols and peroxymonosulfate: pH dependency and reaction pathways

Chen-Xuan Li et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Review Environmental Sciences

An overview of chlorophenols as contaminants and their removal from wastewater by adsorption: A review

Zaharaddeen N. Garba et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)

Add to Collection

Article Engineering, Environmental

Self-assembly of 3D MnO2/N-doped graphene hybrid aerogel for catalytic degradation of water pollutants: Structure-dependent activity

Qi Dong et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Review Engineering, Environmental

Persulfate-based advanced oxidation processes (AOPs) for organic-contaminated soil remediation: A review

Zhou Zhou et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Acoustics

Ultrasound-assisted heterogeneous Fenton-like process for bisphenol A removal at neutral pH using hierarchically structured manganese dioxide/biochar nanocomposites as catalysts

Kyung-Won Jung et al.

ULTRASONICS SONOCHEMISTRY (2019)

Add to Collection

Article Engineering, Environmental

Effect of MnO2 Phase Structure on the Oxidative Reactivity toward Bisphenol A Degradation

Jianzhi Huang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Applied

Catalytic wastewater treatment: Oxidation and reduction processes. Recent studies on chlorophenols

Claude Descorme

CATALYSIS TODAY (2017)

Add to Collection

Article Chemistry, Applied

Peroxymonosulfate activation by Mn3O4/metal-organic framework for degradation of refractory aqueous organic pollutant rhodamine B

Longxing Hu et al.

CHINESE JOURNAL OF CATALYSIS (2017)

Add to Collection

Article Engineering, Environmental

Decoration of one-dimensional MnO2 with Co3O4 nanoparticles: A heterogeneous interface for remarkably promoting catalytic oxidation activity

Wenxiang Tang et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Article Engineering, Environmental

Efficient activation of peroxymonosulfate by magnetic Mn-MGO for degradation of bisphenol A

Jiangkun Du et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

In situ fabrication of Mn3O4 decorated graphene oxide as a synergistic catalyst for degradation of methylene blue

Yuqian Li et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Add to Collection

Article Engineering, Environmental

Activation of peroxymonosulfate with magnetic Fe3O4-MnO2 core-shell nanocomposites for 4-chlorophenol degradation

Jie Liu et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Chemistry, Physical

Shape-controlled activation of peroxymonosulfate by single crystal α-Mn2O3 for catalytic phenol degradation in aqueous solution

Edy Saputra et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2014)

Add to Collection

Article Biochemical Research Methods

A simple solvothermal process for fabrication of a metal-organic framework with an iron oxide enclosure for the determination of organophosphorus pesticides in biological samples

Suling Zhang et al.

JOURNAL OF CHROMATOGRAPHY A (2014)

Add to Collection

Article Chemistry, Physical

Manganese oxides at different oxidation states for heterogeneous activation of peroxymonosulfate for phenol degradation in aqueous solutions

Edy Saputra et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Photochemical Water Oxidation by Crystalline Polymorphs of Manganese Oxides: Structural Requirements for Catalysis

David M. Robinson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Engineering, Environmental

Effects of chloride ion on degradation of Acid Orange 7 by sulfate radical-based advanced oxidation process: Implications for formation of chlorinated aromatic compounds

Ruixia Yuan et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Selective Binding of O2 over N2 in a Redox-Active Metal-Organic Framework with Open Iron(II) Coordination Sites

Eric D. Bloch et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection

Article Environmental Sciences

A rapid spectrophotometric determination of persulfate anion in ISCO

Chenju Liang et al.

CHEMOSPHERE (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.