4.6 Article

Unexpected low thermal expansion coefficients of pentadiamond

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Extraordinary negative thermal expansion of monolayer biphenylene

Qingfang Li et al.

Summary: The study successfully fabricated two-dimensional biphenylene with sp(2)-hybridized carbon atoms and found that the monolayer biphenylene exhibits negative and anisotropic in-plane thermal expansion, with the negative thermal expansion reaching up to 1000K. At 300K, the linear thermal expansion coefficient of biphenylene along the a-direction is three times that of graphene.

CARBON (2022)

Review Chemistry, Physical

Zentropy Theory for Positive and Negative Thermal Expansion

Zi-Kui Liu et al.

Summary: The study introduces a general theory based on multiscale entropy to explain why volume sometimes decreases with increasing temperature. It is found that a phase at high temperatures is a statistical representation of the ground-state stable and multiple nonground-state metastable configurations. The theory provides a new understanding of the behavior of phase volume changes with temperature.

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2022)

Article Materials Science, Multidisciplinary

Negative Thermal Expansion of Carbon Nanotube Bundles

Leysan Kh Galiakhmetova et al.

Summary: Aligned carbon nanotube bundles exhibit negative lateral thermal expansion under lateral loading and heating conditions. The coefficient of thermal expansion is practically constant up to 1500 K and does not depend on biaxial lateral compression. This anomalous behavior is explained by the elliptization of the CNT cross section and bending of the CNT walls by thermal fluctuations.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2022)

Review Chemistry, Multidisciplinary

Chemical Diversity for Tailoring Negative Thermal Expansion

Qiang Li et al.

Summary: Negative thermal expansion (NTE) has been a prominent topic in solid-state chemistry and functional materials, and the response of a lattice to temperature is closely related to its structural features and physical properties. In recent years, significant progress has been made in the study of NTE compounds, but the intelligent design of NTE structures and efficient control of lattice thermal expansion remain challenging. Nevertheless, the diverse chemical synthesis routes offer numerous strategies for achieving desirable NTE behaviors and related properties.

CHEMICAL REVIEWS (2022)

Article Thermodynamics

High thermal conductivity of carbon allotropes and its relationship with mechanical properties: A first-principles study

Yanan Xiao et al.

Summary: In this paper, the lattice thermal conductivity of various carbon allotropes with different crystal structures was systematically studied, and it was found that the lattice thermal conductivity is proportional to bulk modulus. These findings can be used to estimate the thermal conductivity of carbon allotropes and guide future thermoelectric device designs.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Article Physics, Applied

Negative thermal expansion of group III-Nitride monolayers

Sevil Sarikurt et al.

Summary: This study investigates the thermal expansion coefficients of group III-Nitride monolayers with temperature, revealing high negative values below room temperature and a convergence to zero for certain monolayers above room temperature. The highest contribution to negative thermal expansion comes from the ZA phonon mode. These findings are important for the design of nanoscale heat devices.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

Article Physics, Condensed Matter

Mechanical response of pentadiamond: A DFT and molecular dynamics study

Levi C. Felix et al.

Summary: In this study, the mechanical, electronic properties, and thermal stability of pentadiamond were investigated through simulations using DFT and fully atomistic reactive molecular dynamics (MD). The behavior of pentadiamond under compressive deformation showed strong fluctuations in atomic positions, leading to strain softening. As temperature increased, the Young's modulus values decreased, while the fracture strain was highly sensitive.

PHYSICA B-CONDENSED MATTER (2022)

Article Nanoscience & Nanotechnology

P222 1-C8: A novel carbon allotrope denser than diamond

Mingqing Liao et al.

Summary: We introduce a new superdense and superhard carbon allotrope, P222(1)-C8, with higher density and comparable hardness to diamond. The stability of P222(1)-C8 is confirmed through energy, phonon frequencies, and elastic constants calculations. It has a smaller bandgap compared to diamond. The matching between simulated X-ray diffraction and detonation experiments suggests a possible synthesis method.

SCRIPTA MATERIALIA (2022)

Article Computer Science, Interdisciplinary Applications

A high-efficient strain-stress method for calculating higher-order elastic constants from first-principles

Mingqing Liao et al.

Summary: In this paper, a general and efficient strain-stress method (SSM) is proposed for calculating higher-order elastic constants (HOECs) from first-principles. The SSM significantly reduces the required number of strain modes and improves the convergence against maximum strain. An algorithm and an open source code are provided to accelerate the development of calculation tools for HOECs.

COMPUTER PHYSICS COMMUNICATIONS (2022)

Article Physics, Multidisciplinary

P212121-C16: An ultrawide bandgap and ultrahard carbon allotrope with the bandgap larger than diamond

Mingqing Liao et al.

Summary: In this study, a new orthorhombic carbon allotrope with ultrawide bandgap and ultra-large hardness is identified as a potential next-generation semiconductor material. The stability and experimental feasibility of this material are confirmed through theoretical calculations and comparison with experimental data. This discovery has the potential to advance semiconductor technology.

FRONTIERS OF PHYSICS (2022)

Article Chemistry, Physical

Pressure enhanced negative thermal expansion in 2H CuScO2 from first-principles calculations

Dahu Chang et al.

Summary: The study investigates the negative thermal expansion behavior in 2H CuScO2 under pressure using density functional theory and quasi-harmonious approximation. The results show that the material undergoes thermal softening and a decrease in low energy modes and Gruneisen parameters under pressure. Additionally, the transverse vibration of Cu atoms becomes stronger. These factors contribute to the enhanced negative thermal expansion property in 2H CuScO2.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

Article Chemistry, Physical

A DFT investigation of the electronic, optical, and thermoelectric properties of pentadiamond

Raphael M. Tromer et al.

Summary: The newly proposed 3D carbon allotrope pentadiamond shows characteristics of a semiconductor with an indirect bandgap, low reflectivity, and good thermoelectric properties. Its electronic, optical, and thermoelectric properties were investigated using first-principles methods.

CHEMICAL PHYSICS LETTERS (2021)

Article Thermodynamics

DFTTK: Density Functional Theory ToolKit for high-throughput lattice dynamics calculations

Yi Wang et al.

Summary: This work presents a Python software package called DFTTK for high-throughput first-principles calculations of thermodynamic properties at finite temperatures. It integrates decades of experience in theoretical methods and computational software development, with task submissions supported on major operating systems and task executions on high-performance computing environments. The DFTTK package distribution includes examples of calculations for various thermodynamic properties of different chemical phases and compositions.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2021)

Article Materials Science, Ceramics

Pressure and temperature dependence of second-order elastic constants from third-order elastic constants in TMC (TM=Nb, Ti, V, Zr)

Mingqing Liao et al.

Summary: This paper presents an efficient method to predict the pressure and temperature dependence of elastic constants in ultrahigh temperature ceramics by introducing third-order elastic constants. The method is validated by comparing with experiments and previous calculations, and can be used to investigate the anisotropic properties of polycrystalline modulus. Additionally, the elastic constants can be fitted with pressure and temperature within the framework of CALPHAD for practical usage.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Temperature and defect effects on the mechanical properties of pentadiamond

Huasong Qin et al.

Summary: Pentadiamond exhibits good high-temperature stability but its fracture strength and strain are significantly affected by temperature. Atomic vacancies at C2 position have a stronger impact on mechanical properties than vacancies at other positions, with single vacancies at C2 position showing a greater effect than double vacancies at C2-C3 positions. Hydrogen functionalization also has a strong influence on the mechanical properties, causing a notable decrease in fracture strength and strain as H-coverage increases.

DIAMOND AND RELATED MATERIALS (2021)

Article Chemistry, Physical

Pentadiamond: A Highly Efficient Electron Transport Layer for Perovskite Solar Cells

Ping-Ping Sun et al.

Summary: Pentadiamond is discovered as a highly efficient electron transport material that can enhance interface carrier extraction, showing excellent photovoltaic performance. With semiconductor properties and outstanding electron transport capability, it has great potential for applications in PSCs.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Article Physics, Condensed Matter

Elastic and mechanical properties of cubic diamond and silicon using density functional theory and the random phase approximation

M. Barhoumi et al.

Summary: Elastic constants play a central role in regulating the thermo-mechanical and anisotropic response of materials. In this study, diamond and silicon's elastic constants were obtained using density functional theory and the random phase approximation, showing excellent agreement with experimental data. The mechanical properties of these materials were studied, and 3D and 2D plots were visualized for Young's modulus, Poisson's ratio, and others.

SOLID STATE COMMUNICATIONS (2021)

Article Computer Science, Interdisciplinary Applications

Elastic3rd: A tool for calculating third-order elastic constants from first-principles calculations

Mingqing Liao et al.

Summary: The paper introduces Elastic3rd, an open-source Python package that can calculate third-order and second-order elastic constants for crystals with any symmetry from first-principles calculations. The code has been validated through case studies of various materials like C, Si, and Mg.

COMPUTER PHYSICS COMMUNICATIONS (2021)

Article Materials Science, Multidisciplinary

Revisiting the third-order elastic constants of diamond: The higher-order effect

Mingqing Liao et al.

Summary: In this study, the higher-order effects on the third-order elastic constants (TOECs) of diamond were investigated using longitudinal stress-uniaxial strain (LSUS) approach based on density functional theory. The results showed that these higher-order effects are significant and cannot be neglected in shock wave experiments and similar calculations, leading to substantial errors. By considering higher-order elastic response up to fifth order, the convergence of TOECs against maximum strain was significantly improved, resolving discrepancies between various theoretical methods and experiments.

DIAMOND AND RELATED MATERIALS (2021)

Article Materials Science, Multidisciplinary

Temperature dependence of Young's modulus of single-crystal diamond determined by dynamic resonance

Xiulin Shen et al.

Summary: This study investigates the Young's modulus of (100) oriented single-crystal diamond from room temperature to 700 degrees C, using a dynamic resonance frequency method based on experimental and theoretical approaches. The results show that the Young's modulus of SCD follows the same model as temperature increases, providing a convenient and accurate method to measure the dependency of SCD Young's modulus on temperature.

DIAMOND AND RELATED MATERIALS (2021)

Article Physics, Applied

Low lattice thermal conductivity of pentadiamond

Yanyan Chen et al.

Summary: The study systematically investigates the lattice thermal conductivity and phonon transport properties of pentadiamond, a new three-dimensional carbon allotrope. It is found that the low thermal conductivity of pentadiamond primarily originates from its large phonon phase space, short phonon relaxation time, and low phonon group velocity.

JOURNAL OF APPLIED PHYSICS (2021)

Review Physics, Multidisciplinary

Negative thermal expansion: Mechanisms and materials

Erjun Liang et al.

Summary: The article reviews recent understandings on the underlying mechanisms of negative thermal expansion (NTE) and the development of NTE materials, highlighting NTE driven by phonons and the interplay between anisotropic elasticity and phonons. It also discusses issues affecting applications of NTE materials and strategies for discovering novel NTE materials with framework structures.

FRONTIERS OF PHYSICS (2021)

Article Materials Science, Multidisciplinary

First-principles investigation of electronic, optical, mechanical and heat transport properties of pentadiamond: A comparison with diamond

Bohayra Mortazavi et al.

Summary: This study investigates the properties of pentadiamond through first-principles calculations, comparing it directly to diamond in terms of electronic structure, optical characteristics, mechanical response, and lattice thermal conductivity. The results show that pentadiamond has different absorption, elasticity, and thermal conductivity compared to diamond, suggesting both unique advantages and disadvantages in mechanical strength and heat conduction.

CARBON TRENDS (2021)

Article Materials Science, Multidisciplinary

Extraordinary negative thermal expansion of two-dimensional nitrides: A comparative ab initio study of quasiharmonic approximation and molecular dynamics simulations

Ilker Demiroglu et al.

Summary: In this study, the thermal expansion behavior of 2D nitrides and graphene was investigated through ab initio molecular dynamics simulations and quasiharmonic approximation. The anharmonicity of phonon modes was found to contribute to the unusual negative thermal expansion behavior of nitrides, with direct ab initio MD simulations being a more detailed method than QHA for studying this behavior. Despite the computational method chosen, giant negative thermal expansion coefficients were observed for h-GaN and h-AlN in the temperature range of 100-600 K, which was attributed to out-of-plane oscillations related to rippling behavior in the monolayers.

PHYSICAL REVIEW B (2021)

Article Materials Science, Multidisciplinary

Modeling of alloying effect on elastic properties in BCC Nb-Ti-V-Zr solid solution: From unary to quaternary

Mingqing Liao et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

Article Physics, Multidisciplinary

Superconductivity in Compression-Shear Deformed Diamond

Chang Liu et al.

PHYSICAL REVIEW LETTERS (2020)

Article Physics, Multidisciplinary

Pentadiamond: A Hard Carbon Allotrope of a Pentagonal Network of sp2 and sp3 C Atoms

Yasumaru Fujii et al.

PHYSICAL REVIEW LETTERS (2020)

Article Materials Science, Multidisciplinary

First-principles calculation of higher-order elastic constants using exact deformation-gradient tensors

S. P. Lepkowski

PHYSICAL REVIEW B (2020)

Article Materials Science, Multidisciplinary

Thermal expansion coefficient of diamond in a wide temperature range

P. Jacobson et al.

DIAMOND AND RELATED MATERIALS (2019)

Editorial Material Physics, Applied

A Hunt for Ultrahard Materials

Vladimir L. Solozhenko et al.

JOURNAL OF APPLIED PHYSICS (2019)

Article Chemistry, Multidisciplinary

Homo Citans and Carbon Allotropes: For an Ethics of Citation

Roald Hoffmann et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Physics, Applied

Elastic constant C11 of 12C diamond between 10 and 613 K

A. Nagakubo et al.

APPLIED PHYSICS LETTERS (2016)

Article Chemistry, Multidisciplinary

Third-order elastic constants of diamond determined from experimental data

J. M. Winey et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2016)

Article Materials Science, Multidisciplinary

Rigid unit modes in sp-sp2 hybridized carbon systems: Origin of negative thermal expansion

Cheol-Woon Kim et al.

PHYSICAL REVIEW B (2015)

Article Nanoscience & Nanotechnology

First principles phonon calculations in materials science

Atsushi Togo et al.

SCRIPTA MATERIALIA (2015)

Article Computer Science, Interdisciplinary Applications

YPHON: A package for calculating phonons of polar materials

Yi Wang et al.

COMPUTER PHYSICS COMMUNICATIONS (2014)

Article Nanoscience & Nanotechnology

Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

Anubhav Jain et al.

APL MATERIALS (2013)

Article Materials Science, Multidisciplinary

Strength, hardness, and lattice vibrations of Z-carbon and W-carbon: First-principles calculations

Zhiping Li et al.

PHYSICAL REVIEW B (2012)

Article Chemistry, Physical

Modeling hardness of polycrystalline materials and bulk metallic glasses

Xing-Qiu Chen et al.

INTERMETALLICS (2011)

Article Materials Science, Multidisciplinary

Ultraprecise studies of the thermal expansion coefficient of diamond using backscattering x-ray diffraction

Stanislav Stoupin et al.

PHYSICAL REVIEW B (2011)

Article Physics, Multidisciplinary

Experimental Determination of Third-Order Elastic Constants of Diamond

J. M. Lang et al.

PHYSICAL REVIEW LETTERS (2011)

Article Physics, Applied

Diamond's elastic stiffnesses from 322 K to 10 K

Albert Migliori et al.

JOURNAL OF APPLIED PHYSICS (2008)

Article Physics, Multidisciplinary

Universal elastic anisotropy index

Shivakumar I. Ranganathan et al.

PHYSICAL REVIEW LETTERS (2008)

Article Multidisciplinary Sciences

Superconductivity in diamond

EA Ekimov et al.

NATURE (2004)

Article Physics, Multidisciplinary

Calculated equation of state of Al, Cu, Ta, Mo, and W to 1000 GPa

Y Wang et al.

PHYSICAL REVIEW LETTERS (2000)