☆ 4.7 Article

Constructing a multidimensional porous structure of K/Co co-substituted Na3V2(PO4)3/C attached on the lamellar Ti3C2Tx MXene substrate for superior sodium storage property

DALTON TRANSACTIONS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

An Advanced High-Entropy Fluorophosphate Cathode for Sodium-Ion Batteries with Increased Working Voltage and Energy Density

Zhen-Yi Gu et al.

Summary: This study investigates the issue of voltage plateau regulation for cathode materials with fixed active center in sodium-ion batteries. A high-entropy substitution strategy is utilized to alter the crystal structure of the cathode materials, resulting in enhanced electronic conductivity and reduced diffusion barrier for Na+. The carbon-free high-entropy Na3V1.9(Ca,Mg,Al,Cr,Mn)(0.1)(PO4)(2)F-3 cathode exhibits higher mean voltage and advantageous energy density. The introduction of high entropy enables higher working voltage of the cathode, and coupling with a hard carbon anode achieves high specific energy density.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Effect of K/Zr co-doping on the elevated electrochemical performance of Na3V2(PO4)3/C cathode material for sodium ion batteries

Jiahao Li et al.

Summary: By co-doping K(+) and Zr(4+), the NVP structure was successfully optimized, increasing the Na(+) migration channels and intrinsic electrical conductivity, thereby significantly improving the electrochemical performance.

IONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Microbe-Assisted Assembly of Ti3C2Tx MXene on Fungi-Derived Nanoribbon Heterostructures for Ultrastable Sodium and Potassium Ion Storage

Junming Cao et al.

Summary: This study designed a MXene@N-doped carbonaceous nanofiber structure through an in situ bioadsorption strategy, significantly improving the performance of sodium- and potassium-ion batteries. The microorganism-derived 2D MXene-1D N-doped carbonaceous nanofiber structure with fully opened pores and transport channels enhances ion conduction and transport, showing potential for addressing challenges in 2D energy storage materials.

ACS NANO (2021)

Add to Collection

Article Electrochemistry

Simultaneous zirconium substitution and polypyrrole interconnection of Na3V2(PO4)3/C nanoparticles for superior sodium storage performance

Jun Cheng et al.

Summary: The simultaneous strategy of Zr4+ doping and polypyrrole (ppy) decorating synergistically improves the electronic and ionic conductivities of Na3V2(PO4)(3) (NVP), leading to enhanced capacity and cycling performance in both half-cell and full-cell tests. The kinetic characteristics of the optimized material are explored through galvanostatic intermittent titration technique, revealing a minimum Na+ diffusion coefficient and intense interactions at 3.4 V.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Materials Science, Ceramics

Boosting the rate capability and working lifespan of K/Co co-doped Na3V2(PO4)3/C for sodium ion batteries

Zeyi Tian et al.

Summary: The K/Co co-doped NVP composite cathode shows optimized sodium storage property, with improved structural stability and ionic diffusivity, leading to outstanding electrochemical performance in sodium ion batteries.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Strongly Coupled 2D Transition Metal Chalcogenide-MXene-Carbonaceous Nanoribbon Heterostructures with Ultrafast Ion Transport for Boosting Sodium/Potassium Ions Storage

Junming Cao et al.

Summary: The study presents a novel ternary heterostructure designed for fast sodium-ion (SIB) and potassium-ion (PIB) batteries, which prevents restacking of 2D materials, increases intrinsic conductivity, and provides ultrafast interfacial ion transport pathways. The interfacial ion transport in this MXene-based heterostructure is significantly higher than that of pristine MXenes, leading to improved Na+ and K+ storage capabilities and excellent long-term cycling stability.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Engineering, Environmental

Simultaneous modified Na2.9V1.9Zr0.1(PO4)3/C@rGO as a superior high rate and ultralong lifespan cathode for symmetric sodium ion batteries

Yanjun Chen et al.

Summary: The dual strategy of optimizing the crystal structure and conductive characteristics of NVP by substituting Zr4+ and creating vacancies, along with the coated carbon layer and rGO, results in outstanding performance in sodium ion batteries. The Zr0.1-NVP/C@rGO demonstrates excellent rate capability and long cyclic stability, offering a potential strategy for other high-quality materials in SIBs.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Electrochemistry

Boosting the rate capability and cycle life of Zr-substituted Na3V2(PO4)3/C enwrapped on carbon nanotubes for symmetric Na-ion batteries

Jun Cheng et al.

Summary: The dual modification of NVP using Zr substitution and CNTs enwrapping improved its conductivity and stability, resulting in excellent electrochemical performance. The modified Zr0.1-NVP/C@CNTs exhibited superior cycling stability and high capacity retention.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Air/water/temperature-stable cathode for all-climate sodium-ion batteries

Zhen-Yi Gu et al.

Summary: This study reports a stable cathode material with high specific capacity, excellent rate capability, long-term cycle life, and all-climate performance, which shows no obvious capacity attenuation in various storage conditions. The cathode is composed of Na3V2(PO4)(2)O2F0.99Cl0.01 microcubes, and in/ex situ characterization and electrode kinetics studies are used to reveal the possible reasons for its stability and electrochemical activity. This work may provide a pathway for the development of all-climate and storage-stable SIB cathode materials.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Effects of low doping on the improvement of cathode materials Na3+xV2-xMx(PO4)3 (M = Co2+, Cu2+; x=0.01-0.05) for SIBs

Ruoyu Chen et al.

Summary: Metal ion doping was used to enhance the electrochemical performance of Na (NVP) cathode material for sodium-ion batteries. The study demonstrated that doping with Co or Cu did not alter the NVP structure, and the presence of an amorphous carbon coating improved the electronic conductivity of the composites. Among the samples, Na/C composite showed the highest electrochemical ability with a stable reversible capacity even at high cycling rates.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Electrochemistry

A low-defect and Na-enriched Prussian blue lattice with ultralong cycle life for sodium-ion battery cathode

Changxiu Yan et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

High Capacity and High-Rate NASICON-Na3.75V1.25Mn0.75(PO4)3 Cathode for Na-Ion Batteries via Modulating Electronic and Crystal Structures

Subham Ghosh et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Increasing Energy Density with Capacity Preservation by Aluminum Substitution in Sodium Vanadium Phosphate

Ana Criado et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Insights into the elevated electrochemical performance and kinetic characteristics of magnesium-substituted Na3V2-xMgx(PO4)3/C with superior rate capability and long lifespan

Yanjun Chen et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

K+ and Mg2+ co-doped bipolar Na3V2(PO4)3: An ultrafast electrode for symmetric sodium ion full cell

Amalendu Das et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Analytical

Bio-synthesized P2-Na0.57CoO2 nanoparticles as cathode for aqueous sodium ion battery

Assumpta Chinwe Nwanya et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

An iron-doped NASICON type sodium ion battery cathode for enhanced sodium storage performance and its full cell applications

Jae Yeol Park et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Carbon quantum dot modified Na3V2(PO4)2F3 as a high-performance cathode material for sodium-ion batteries

Shengyuan Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Polyanion-type cathode materials for sodium-ion batteries

Ting Jin et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

A Stable Layered Oxide Cathode Material for High-Performance Sodium-Ion Battery

Yao Xiao et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Organic Cross-Linker Enabling a 3D Porous Skeleton-Supported Na3V2(PO4)3/Carbon Composite for High Power Sodium-lon Battery Cathode

Enhui Wang et al.

SMALL METHODS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Nanocomposite Materials for the Sodium-Ion Battery: A Review

Yaru Liang et al.

SMALL (2018)

Add to Collection

Article Electrochemistry

Improvement in electrochemical performance of Na3V2(PO4)(3)/C cathode material for sodium-ion batteries by K-Ca co-doping

Qing Zhu et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Different Effects of Al Substitution for Mn or Fe on the Structure and Electrochemical Properties of Na0.67Mn0.5Fe0.5O2 as a Sodium Ion Battery Cathode Material

Huibo Wang et al.

INORGANIC CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Preventing structural degradation from Na3V2(PO4)(3) to V-2(PO4)(3): F-doped Na3V2(PO4)(3)/C cathode composite with stable lifetime for sodium ion batteries

Yanjun Chen et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Review Green & Sustainable Science & Technology

The lithium-ion battery: State of the art and future perspectives

Ghassan Zubi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Review Chemistry, Physical

Sodium-Ion Battery Materials and Electrochemical Properties Reviewed

Kudakwashe Chayambuka et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 Cathode Material with Suppressed P2-O2 Phase Transition toward High-Performance Sodium-Ion Battery

Qiong Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Review Electrochemistry

Recent Advances in Sodium-Ion Battery Materials

Yongjin Fang et al.

ELECTROCHEMICAL ENERGY REVIEWS (2018)

Add to Collection

Article Chemistry, Physical

High Anode Performance of in Situ Formed Cu2Sb Nanoparticles Integrated on Cu Foil via Replacement Reaction for Sodium-Ion Batteries

Liubin Wang et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Porous spherical Na3V2 (PO4)3/C composites synthesized via a spray drying-assisted process with high-rate performance as cathode materials for sodium-ion batteries

Wei Zheng et al.

SOLID STATE IONICS (2017)

Add to Collection

Article Chemistry, Physical

Robust three-dimensional graphene skeleton encapsulated Na3V2O2(PO4)2F nanoparticles as a high-rate and long-life cathode of sodium-ion batteries

Yameng Yin et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Outlook on Lithium Ion Battery Technology

Arumugam Manthiram

ACS CENTRAL SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Prussian Blue@C Composite as an Ultrahigh-Rate and Long-Life Sodium-Ion Battery Cathode

Yinzhu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Chemistry, Inorganic & Nuclear

P2-Type Na0.67Ni0.23Mg0.1Mn0.67O2 as a High-Performance Cathode for a Sodium-Ion Battery

Huidan Hou et al.

INORGANIC CHEMISTRY (2016)

Add to Collection

Article Chemistry, Physical

Controllable construction of 3D-skeleton-carbon coated Na3V2(PO4)3 for high-performance sodium ion battery cathode

Qing Zhang et al.

NANO ENERGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Assembling carbon quantum dots to a layered carbon for high-density supercapacitor electrodes

Guanxiong Chen et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A Superior Na3V2(PO4)3-Based Nanocornposite Enhanced by Both N-Doped Coating Carbon and Graphene as the Cathode for Sodium-Ion Batteries

Jin-Zhi Guo et al.

CHEMISTRY-A EUROPEAN JOURNAL (2015)

Add to Collection

Article Electrochemistry

P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 Cathode Material with High-capacity for Sodium-ion Battery

Dingding Yuan et al.

ELECTROCHIMICA ACTA (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium ion battery applications of molybdenum disulfide (MoS2) nanocomposites

Tyler Stephenson et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

β-NaMnO2: A High-Performance Cathode for Sodium-Ion Batteries

Juliette Billaud et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

A study into the extracted ion number for NASICON structured Na3V2(PO4)3 in sodium-ion batteries

Weixin Song et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Chemistry, Physical

Structural enhancement of Na3V2(PO4)(3)/C composite cathode materials by pillar ion doping for high power and long cycle life sodium-ion batteries

Sung-Jin Lim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Chemistry, Physical

Transition metal oxides for high performance sodium ion battery anodes

Yinzhu Jiang et al.

NANO ENERGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Sodium-Ion Batteries

Michael D. Slater et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Add to Collection

Review Chemistry, Physical

A review on the key issues for lithium-ion battery management in electric vehicles

Languang Lu et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Thermodynamics

Lithium ion battery production

Antti Vayrynen et al.

JOURNAL OF CHEMICAL THERMODYNAMICS (2012)

Add to Collection

Article Engineering, Manufacturing

Dynamic lithium-ion battery model for system simulation

LJ Gao et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.