4.6 Article

Application of Low-Cost Sensors for Accurate Ambient Temperature Monitoring

Related references

Note: Only part of the references are listed.
Article Chemistry, Analytical

High-Precision Low-Cost Gimballing Platform for Long-Range Railway Obstacle Detection

Elio Hajj Assaf et al.

Summary: The increasing demand for rail transportation requires more advanced vehicle safety systems. Current research shows that only a few sensor modalities are capable of accurately detecting objects over 1000 meters away. This paper presents a high-precision pointing mechanism for a railway obstacle detection system, which can target a sensor at the required distance.

SENSORS (2022)

Article Construction & Building Technology

A data-driven approach for regional bridge condition assessment using inspection reports

Ye Xia et al.

Summary: This study proposes a comprehensive data-driven framework for network-level bridge condition assessment. By analyzing periodic bridge inspection reports in China, the future condition of bridges can be predicted, and maintenance strategies can be optimized to meet economic and performance constraints.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

Article Chemistry, Analytical

A Novel Wireless Low-Cost Inclinometer Made from Combining the Measurements of Multiple MEMS Gyroscopes and Accelerometers

Seyedmilad Komarizadehasl et al.

Summary: This paper presents a novel low-cost inclinometer, LARA, which incorporates five gyroscopes and five accelerometers to measure inclination. LARA utilizes IoT technology for wireless data streaming and achieves high accuracy. Experimental results show that LARA is suitable for structural damage detection on bridges.

SENSORS (2022)

Article Construction & Building Technology

A Novel Data Acquisition System for Obtaining Thermal Parameters of Building Envelopes

Behnam Mobaraki et al.

Summary: A novel hyper-efficient Arduino transmittance-meter was introduced to overcome limitations in appraising the thermal performance of building envelopes. The experimental results showed a high level of cost reduction and a low range of difference compared with a commercial device, validating the applicability of the proposed thermal monitoring system.

BUILDINGS (2022)

Article Chemistry, Analytical

Green Smart Campus Monitoring and Detection Using LoRa

Kuo-Hsiung Tseng et al.

Summary: The study integrated civil engineering and electrical engineering to establish a universal and modularized long-term sensing system for researching the impact of green buildings on temperature. Results indicated that solar panels on the roof effectively reduce temperature increase from direct sunlight, while plant greening and permeable pavement also affect temperature reduction efficiency.

SENSORS (2021)

Article Chemistry, Analytical

Long-Term Monitoring of a Tunnel in a Landslide Prone Area by Brillouin-Based Distributed Optical Fiber Sensors

Aldo Minardo et al.

Summary: This paper presents the results of monitoring tunnel deformations using a distributed optical fiber strain sensor based on stimulated Brillouin scattering. The study found that the deformation profiles of the tunnel are characterized by strain peaks at structural joints, and there is an increase in the time rate of fiber deformation during periods of accelerated landslide movements in the surrounding area.

SENSORS (2021)

Article Chemistry, Multidisciplinary

Structural Health Monitoring of 2D Plane Structures

Behnam Mobaraki et al.

Summary: This paper presents the application of the observability technique for structural system identification of 2D models, proposing new changes in variables to linearize the system and providing a detailed mathematical analysis to illustrate the procedure. The method's applicability is validated through numerically determining mechanical properties of a state-of-the-art plate.

APPLIED SCIENCES-BASEL (2021)

Article Construction & Building Technology

Hygrothermal investigation of lightweight steel-framed wall assemblies in hot-humid climates: Measurement and simulation validation

Qiaosheng Zhan et al.

Summary: In hot-humid climates, lightweight steel-framed (LSF) constructions face durability challenges. A study on LSF wall assemblies found that ventilated rainscreen performed better than face-sealed cladding, and external insulation improved hygrothermal response. Overall, ventilated rainscreen and external insulation showed the best performance in hot-humid climates. Simulation models are useful for evaluating long-term performance, with conservative settings for uncertain cases.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Green & Sustainable Science & Technology

New Image Recognition Technique for Intuitive Understanding in Class of the Dynamic Response of High-Rise Buildings

Rocio Porras Soriano et al.

Summary: This study introduces a new educational tool for intuitively introducing students to the dynamic response of structures using an educational shaking table. The tool is based on image recognition techniques and only requires a camera, black background, and computer. The study also evaluates the effects of camera location and image quality, and analyzes the dynamic response of small-scale buildings with different typologies.

SUSTAINABILITY (2021)

Article Chemistry, Analytical

Design and Development of a Low Cost, Non-Contact Infrared Thermometer with Range Compensation

Nicholas Wei-Jie Goh et al.

Summary: This article describes the assembly of a digital infrared thermometer using Arduino, MLX90614 IR thermometer, and HC-SR04 ultrasonic sensors for distance correction to improve measurement accuracy.

SENSORS (2021)

Article Chemistry, Analytical

Development of a Low-Cost System for the Accurate Measurement of Structural Vibrations

Seyedmilad Komarizadehasl et al.

Summary: Engineers currently use accelerometers for structural verification, but the high cost limits their use. A Cost Hyper-Efficient Arduino Product (CHEAP) has been developed, which accurately measures structural accelerations at a significantly lower price and with better accuracy, especially at low frequencies and low acceleration amplitudes. Tests showed that CHEAP outperformed other systems in terms of price and accuracy, with better observable resolution in Fast Fourier Transformation assessments.

SENSORS (2021)

Article Environmental Sciences

Artificial Intelligence Based Structural Assessment for Regional Short- and Medium-Span Concrete Beam Bridges with Inspection Information

Ye Xia et al.

Summary: This paper proposes an artificial intelligence-based methodology for condition assessment of regional bridges, which includes data integration, condition assessment, and maintenance optimization. The regional bridge condition deterioration model is established by neural networks, and the impact of the maintenance scheme on the future condition of bridges is quantified.

REMOTE SENSING (2021)

Review Construction & Building Technology

Application of Low-Cost Sensors for Building Monitoring: A Systematic Literature Review

Behnam Mobaraki et al.

Summary: This article presents a systematic review of the state of the art in low-cost sensors technology in building monitoring, illustrating their potential uses and addressing key parameters and communication protocols in building monitoring. The article emphasizes on the deficiencies in current studies and proposes parameters for future research in building monitoring.

BUILDINGS (2021)

Article Green & Sustainable Science & Technology

Aerial Tramway Sustainable Monitoring with an Outdoor Low-Cost Efficient Wireless Intelligent Sensor

Rafael Cardona Huerta et al.

Summary: Researchers have developed a low-cost intelligent sensor system for monitoring the Sandia Peak Tramway operations, achieving a sustainable and cost-efficient maintenance solution.

SUSTAINABILITY (2021)

Article Construction & Building Technology

Heterogeneous multirobot cleaning system: State and parameter estimation

Takuma Nemoto et al.

AUTOMATION IN CONSTRUCTION (2020)

Article Construction & Building Technology

Wireless sensor network for estimating building performance

Mario Frei et al.

AUTOMATION IN CONSTRUCTION (2020)

Article Construction & Building Technology

Low cost system for measuring the evolution of mechanical properties in cement mortars as a function of mixing water

E. Yedra Alvarez et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Automated data analysis for static structural health monitoring of masonry heritage structures

Nirvan Makoond et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

Review Engineering, Civil

LIFE CYCLE SUSTAINABILITY ASSESSMENT FOR MULTI-CRITERIA DECISION MAKING IN BRIDGE DESIGN: A REVIEW

Ignacio Javier Navarro et al.

JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2020)

Article Construction & Building Technology

Long-term performance monitoring and assessment of concrete beam bridges using neutral axis indicator

Ye Xia et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

Article Construction & Building Technology

Wireless electric appliance control for smart buildings using indoor location tracking and BIM-based virtual environments

Khandakar M. Rashid et al.

AUTOMATION IN CONSTRUCTION (2019)

Article Construction & Building Technology

Road roughness measurement using a cost-effective sensor-based monitoring system

Mohammad Arbabpour Bidgoli et al.

AUTOMATION IN CONSTRUCTION (2019)

Review Environmental Sciences

Review of the Performance of Low-Cost Sensors for Air Quality Monitoring

Federico Karagulian et al.

ATMOSPHERE (2019)

Article Agriculture, Multidisciplinary

AgriPrediction: A proactive internet of things model to anticipate problems and improve production in agricultural crops

Uelison Jean L. dos Santos et al.

COMPUTERS AND ELECTRONICS IN AGRICULTURE (2019)

Article Engineering, Electrical & Electronic

Open-source Automatic Weather Station and Electronic Ablation Station for measuring the impacts of climate change on glaciers

Guilherme Tomaschewski Netto et al.

HARDWAREX (2019)

Article Environmental Sciences

Bluetooth gas sensing module combined with smartphones for air quality monitoring

Jose Ignacio Suarez et al.

CHEMOSPHERE (2018)

Article Construction & Building Technology

A framework for integrating BIM and IoT through open standards

Bhargav Dave et al.

AUTOMATION IN CONSTRUCTION (2018)

Article Engineering, Electrical & Electronic

Evaluation of Low-Cost Sensors for Ambient PM2.5 Monitoring

Marek Badura et al.

JOURNAL OF SENSORS (2018)

Article Meteorology & Atmospheric Sciences

Field calibration of electrochemical NO2 sensors in a citizen science context

Bas Mijling et al.

ATMOSPHERIC MEASUREMENT TECHNIQUES (2018)

Proceedings Paper Energy & Fuels

An indoor environment monitoring system using low-cost sensor network

Olileke Bamodu et al.

POWER AND ENERGY SYSTEMS ENGINEERING, (CPESE 2017) (2017)

Article Construction & Building Technology

Inertial measurement unit based indoor localization for construction applications

Magdy Ibrahim et al.

AUTOMATION IN CONSTRUCTION (2016)

Article Thermodynamics

Effect of the soil type on the dynamic response of a tunnel under surface detonation

B. Mobaraki et al.

COMBUSTION EXPLOSION AND SHOCK WAVES (2016)

Article Construction & Building Technology

Investigating the probability of behavioural responses to cold thermal discomfort

S. Gauthier

ENERGY AND BUILDINGS (2016)

Article Chemistry, Analytical

Development of a Low-Cost Arduino-Based Sonde for Coastal Applications

Grant Lockridge et al.

SENSORS (2016)

Article Engineering, Chemical

Laboratory Evaluation and Calibration of Three Low- Cost Particle Sensors for Particulate Matter Measurement

Yang Wang et al.

AEROSOL SCIENCE AND TECHNOLOGY (2015)

Article Chemistry, Analytical

Field calibration of a cluster of low-cost available sensors for air quality monitoring. Part A: Ozone and nitrogen dioxide

Laurent Spinelle et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Construction & Building Technology

Numerical study of the depth and cross-sectional shape of tunnel under surface explosion

Behnam Mobaraki et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2015)

Article Construction & Building Technology

BIM-based framework for managing performance of subway stations

Mohamed Marzouk et al.

AUTOMATION IN CONSTRUCTION (2014)

Article Thermodynamics

Experimental study of frost formation on a fin-and-tube heat exchanger by natural convection

Mohammad Amini et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2014)

Article Meteorology & Atmospheric Sciences

The next generation of low-cost personal air quality sensors for quantitative exposure monitoring

R. Piedrahita et al.

ATMOSPHERIC MEASUREMENT TECHNIQUES (2014)

Article Environmental Sciences

The use of electrochemical sensors for monitoring urban air quality in low-cost, high-density networks

M. I. Mead et al.

ATMOSPHERIC ENVIRONMENT (2013)