Related references
Note: Only part of the references are listed.Solving curing-protocol-dependent shape errors in PDMS replication
Emilie Delplanque et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2022)
Twin-Wire Networks for Zero Interconnect, High-Density 4-Wire Electrical Characterizations of Materials
Nerio Andres Montoya et al.
RESEARCH (2022)
Structural, Mechanical, and Dielectric Properties of Polydimethylsiloxane and Silicone Elastomer for the Fabrication of Clinical-Grade Kidney Phantom
Kamal Izdihar et al.
APPLIED SCIENCES-BASEL (2021)
Assessment of the Physical, Mechanical, and Tribological Properties of PDMS Thin Films Based on Different Curing Conditions
Gang-Min Kim et al.
MATERIALS (2021)
Stretchable multifunctional dielectric nanocomposites based on polydimethylsiloxane mixed with metal nanoparticles
Pengdong Feng et al.
MATERIALS RESEARCH EXPRESS (2020)
Double-Framed Thin Elastomer Devices
Valeria Criscuolo et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Tactile sensing and computing on a random network of conducting fluid channels
Alessandro Chiolerio et al.
FLEXIBLE AND PRINTED ELECTRONICS (2020)
Selecting an extraction solvent for a greener liquid phase microextraction (LPME) mode-based analytical method
John M. Kokosa
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2019)
Planarization and edge bead reduction of spin-coated polydimethylsiloxane
Tiffany Baetens et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
Inkjet printing of particle-free silver conductive ink with low sintering temperature on flexible substrates
Yaguo Cai et al.
CHEMICAL PHYSICS LETTERS (2019)
PDMS samples characterization with variations of synthesis parameters for tunable optics applications
Angel S. Cruz-Felix et al.
HELIYON (2019)
Corona Treatment for Nanotransfer Molding Adhesion
Michael E. Deagen et al.
ACS APPLIED POLYMER MATERIALS (2019)
Effect of substrate curvature on thickness distribution of polydimethylsiloxane thin film in spin coating process
Ying Yan et al.
CHINESE PHYSICS B (2018)
Microfabricated tuneable and transferable porous PDMS membranes for Organs-on-Chips
W. F. Quiros-Solano et al.
SCIENTIFIC REPORTS (2018)
Temperature effect on physical properties and surface morphology of printed silver ink during continuous laser scanning sintering
Ik-sang Lee et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Influence of particle arrangement on the permittivity of an elastomeric composite
Peiying J. Tsai et al.
AIP ADVANCES (2017)
Crack-induced Ag nanowire networks for transparent, stretchable, and highly sensitive strain sensors
Chan-Jae Lee et al.
SCIENTIFIC REPORTS (2017)
Needs and Enabling Technologies for Stretchable Electronics Commercialization
Edward Tan et al.
MRS ADVANCES (2017)
Artificial Skin Model simulating dry and moist in vivo human skin friction and deformation behaviour
M. Nachman et al.
TRIBOLOGY INTERNATIONAL (2016)
Substrate Transfer Technology for Stretchable Electronics
S. Joshi et al.
PROCEEDINGS OF THE 30TH ANNIVERSARY EUROSENSORS CONFERENCE - EUROSENSORS 2016 (2016)
Permeability thickness dependence of polydimethylsiloxane (PDMS) membranes
G. Firpo et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
Design, Fabrication, and Characterization of Archaeal Tetraether Free-Standing Planar Membranes in a PDMS- and PCB-Based Fluidic Platform
Xiang Ren et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
1 to 220 GHz Complex Permittivity Behavior of Flexible Polydimethylsiloxane Substrate
P. -Y. Cresson et al.
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS (2014)
Accounting for PDMS shrinkage when replicating structures
Morten Hannibal Madsen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2014)
Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering
I. D. Johnston et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2014)
Electrohydrodynamic Direct-Write Orderly Micro/Nanofibrous Structure on Flexible Insulating Substrate
Jiang-Yi Zheng et al.
JOURNAL OF NANOMATERIALS (2014)
SAM meets MEMS: reliable fabrication of stable Au-patterns embedded in PDMS using dry peel-off process
Ikjoo Byun et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2014)
Micro-heaters embedded in PDMS fabricated using dry peel-off process
Ikjoo Byun et al.
MICROELECTRONIC ENGINEERING (2014)
Methods to ease the release of thin polydimethylsiloxane films from difficult substrates
Sindhu Vudayagiri et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2014)
Triboelectric Nanogenerators as New Energy Technology for Self-Powered Systems and as Active Mechanical and Chemical Sensors
Zhong Lin Wang
ACS NANO (2013)
Multifunctional Epidermal Electronics Printed Directly Onto the Skin
Woon-Hong Yeo et al.
ADVANCED MATERIALS (2013)
Large-Scale, Ultrapliable, and Free-Standing Nanomembranes
Edward Kang et al.
ADVANCED MATERIALS (2013)
The experimental validation of a CFD model for a heating oven with natural air circulation
Jacek Smolka et al.
APPLIED THERMAL ENGINEERING (2013)
Crack-free and reliable lithographical patterning methods on PDMS substrate
Namsun Chou et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
Factors affecting the surface and release properties of thin polydimethylsiloxane films
Sindhu Vudayagiri et al.
POLYMER JOURNAL (2013)
Effect of temperature on electrical conductance of inkjet-printed silver nanoparticle ink during continuous wave laser sintering
Dae-Geon Lee et al.
THIN SOLID FILMS (2013)
Mechanistic Studies on Sintering of Silver Nanoparticles
Steven K. Volkman et al.
CHEMISTRY OF MATERIALS (2011)
Fabrication and Characterization of PDMS Thin Film
Shuping Wang et al.
ORGANIC PHOTONIC MATERIALS AND DEVICES XIII (2011)
Flexible, Stretchable and Implantable PDMS Encapsulated Cable for Implantable Medical Device
Sung Hwan Kim et al.
BIOMEDICAL ENGINEERING LETTERS (2011)
High Breakdown Field Dielectric Elastomer Actuators Using Encapsulated Polyaniline as High Dielectric Constant Filler
Martin Molberg et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Stretchable gold conductors embedded in PDMS and patterned by photolithography: fabrication and electromechanical characterization
T. Adrega et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
Replicable Multilayered Nanofibrous Patterns on a Flexible Film
Seong J. Cho et al.
LANGMUIR (2010)
Materials and Mechanics for Stretchable Electronics
John A. Rogers et al.
SCIENCE (2010)
Thin PDMS Films Using Long Spin Times or Tert-Butyl Alcohol as a Solvent
John H. Koschwanez et al.
PLOS ONE (2009)
Microscale technologies for tissue engineering and biology
A Khademhosseini et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2006)
High-conductivity elastomeric electronics
DS Gray et al.
ADVANCED MATERIALS (2004)
Engineering Microtools in Polymers to Study Cell Biology
Xingyu Jiang et al.
ENGINEERING IN LIFE SCIENCES (2003)
Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices
JN Lee et al.
ANALYTICAL CHEMISTRY (2003)
Microfluidic large-scale integration
T Thorsen et al.
SCIENCE (2002)
Microfabricated PLGA scaffolds: a comparative study for application to tissue engineering
G Vozzi et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Hemocompatibility, biocompatibility, inflammatory and in vivo studies of primary reference materials low-density polyethylene and polydimethylsiloxane:: A review
MC Bélanger et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2001)
Computational fluid dynamics modelling and validation of the temperature distribution in a forced convection oven
P Verboven et al.
JOURNAL OF FOOD ENGINEERING (2000)
Share Paper
