Journal
CHEMICAL ENGINEERING RESEARCH & DESIGN
Volume 187, Issue -, Pages 332-346Publisher
ELSEVIER
DOI: 10.1016/j.cherd.2022.09.0200263-8762
Keywords
Micellar-enhanced ultrafiltration; Response surface methodology; Optimization; Sarkosyl; Lead salts
Categories
Ask authors/readers for more resources
In this study, the micellar-enhanced ultrafiltration (MEUF) process was used to remove Pb2+ ions from aqueous solutions using sodium dodecyl sulfate (SDS) and sodium lauroyl sarcosinate (Sarkosyl) as anionic surfactants. The efficiency of Sarkosyl in lead ion removal was compared to SDS. The effect of electrolyte concentration and lead salt anions on the MEUF process was investigated. The results showed that increasing NaCl concentration significantly reduced the permeate flux, while lead ion concentration had minimal impact. The highest removals of Pb2+ ions were observed at specific concentrations of Pb(NO3)2 and NaCl for both surfactants.
In the present study, the micellar-enhanced ultrafiltration (MEUF) process was employed for the removal of Pb2+ ions from aqueous solutions using sodium dodecyl sulfate (SDS) and sodium lauroyl sarcosinate (Sarkosyl) as the anionic surfactants. The performance of Sarkosyl was compared to SDS, a frequently used surfactant in the MEUF processes, to evaluate their efficiency in the removal of lead ions. Sodium chloride (NaCl) was used as the electrolyte and the role of lead salt anions, lead nitrate (Pb(NO3)2) and lead chloride (PbCl2), was also investigated for the first time in the MEUF process. The MEUF process was modeled using response surface methodology (RSM), and experiments were designed and carried out based on the central composite design (CCD). Two categorical variables of anionic surfactants and lead salts, and two numerical variables of Pb2+ and electrolyte concentrations were considered as the studied factors in this design. The process was assessed in terms of its ability to simultaneously maximize Pb2+ rejection and permeate flux. The results showed that increasing the concentration of NaCl significantly reduces the permeate flux, while lead ions concentration has a negligible impact on the permeate flux. The response surface plots also indicated that the effect of the anionic surfactant type on the permeate flux is insignificant. In the studied range of lead concentrations, the highest removals of Pb2+ ions were observed at the concentration of 21 mg/L of Pb(NO3)2 and 0.05 M of NaCl, equal to 79.27% and 94.74% for Sarkosyl and SDS anionic surfactants, respectively. (c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available