Related references
Note: Only part of the references are listed.Enhancing Moisture and Electrochemical Stability of the Li5.5PS4.5Cl1.5 Electrolyte by Oxygen Doping
Linfeng Peng et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
Hydrolysis of Argyrodite Sulfide-Based Separator Sheets for Industrial All-Solid-State Battery Production
Celestine Singer et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
Characterization of solid-electrolyte/active-material composite particles with different surface morphologies for all-solid-state batteries
Eiji Hayakawa et al.
ADVANCED POWDER TECHNOLOGY (2022)
Systematic evaluation of materials and recipe for scalable processing of sulfide-based solid-state batteries
Mattis Batzer et al.
MATERIALS TODAY COMMUNICATIONS (2022)
Scaling up high-energy-density sulfidic solid-state batteries: A lab-to-pilot perspective
Darren H. S. Tan et al.
JOULE (2022)
Lithium/Sulfide All-Solid-State Batteries using Sulfide Electrolytes
Jinghua Wu et al.
ADVANCED MATERIALS (2021)
Interfacial challenges for all-solid-state batteries based on sulfide solid electrolytes
Shuo Wang et al.
JOURNAL OF MATERIOMICS (2021)
Sustainable Solvent-Free Production and Resulting Performance of Polymer Electrolyte-Based All-Solid-State Battery Electrodes
Laura Helmers et al.
ENERGY TECHNOLOGY (2021)
The Working Principle of a Li2CO3/LiNbO3 Coating on NCM for Thiophosphate-Based All-Solid-State Batteries
Felix Walther et al.
CHEMISTRY OF MATERIALS (2021)
Challenges in Ecofriendly Battery Recycling and Closed Material Cycles: A Perspective on Future Lithium Battery Generations
Stefan Doose et al.
METALS (2021)
Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure
Fabian Duffner et al.
NATURE ENERGY (2021)
Chemical stability of Li4PS4I solid electrolyte against hydrolysis
Marcela Calpa et al.
APPLIED MATERIALS TODAY (2021)
Single- or Poly-Crystalline Ni-Rich Layered Cathode, Sulfide or Halide Solid Electrolyte: Which Will be the Winners for All-Solid-State Batteries?
Yoonjae Han et al.
ADVANCED ENERGY MATERIALS (2021)
Issues and Advances in Scaling up Sulfide-Based All-Solid-State Batteries
Jieun Lee et al.
ACCOUNTS OF CHEMICAL RESEARCH (2021)
Sheet-type all-solid-state batteries with sulfidic electrolytes: Analysis of kinetic limitations based on a cathode morphology study
Moritz Kroll et al.
JOURNAL OF POWER SOURCES (2021)
Increased Moisture Uptake of NCM622 Cathodes after Calendering due to Particle Breakage
Fabienne Huttner et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
Energy Storage Materials for Solid-State Batteries: Design by Mechanochemistry
Roman Schlem et al.
ADVANCED ENERGY MATERIALS (2021)
Continuous Processing of Cathode Slurry by Extrusion for Lithium-Ion Batteries
Matthias Haarmann et al.
ENERGY TECHNOLOGY (2021)
Toward Practical Solid-State Lithium-Sulfur Batteries: Challenges and Perspectives
Saneyuki Ohno et al.
ACCOUNTS OF MATERIALS RESEARCH (2021)
Design-of-experiments-guided optimization of slurry-cast cathodes for solid-state batteries
Jun Hao Teo et al.
CELL REPORTS PHYSICAL SCIENCE (2021)
Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries
Fabienne Huttner et al.
BATTERIES & SUPERCAPS (2021)
Electrolyte/Electrode Interfaces in All-Solid-State Lithium Batteries: A Review
Yuepeng Pang et al.
ELECTROCHEMICAL ENERGY REVIEWS (2021)
Solid-State Li-Metal Batteries: Challenges and Horizons of Oxide and Sulfide Solid Electrolytes and Their Interfaces
Kun Joong Kim et al.
ADVANCED ENERGY MATERIALS (2021)
Heated Calendering of Cathodes for Lithium-Ion Batteries with Varied Carbon Black and Binder Contents
Chris Meyer et al.
ENERGY TECHNOLOGY (2020)
Stack Pressure Considerations for Room-Temperature All-Solid-State Lithium Metal Batteries
Jean-Marie Doux et al.
ADVANCED ENERGY MATERIALS (2020)
Modeling Effective Ionic Conductivity and Binder Influence in Composite Cathodes for All-Solid-State Batteries
Anja Bielefeld et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Preparation of ambient air-stable electrolyte Li4SnS4 by aqueous ion-exchange process
Reiko Matsuda et al.
SOLID STATE IONICS (2020)
High Active Material Loading in All-Solid-State Battery Electrode via Particle Size Optimization
Tan Shi et al.
ADVANCED ENERGY MATERIALS (2020)
How Certain Are the Reported Ionic Conductivities of Thiophosphate-Based Solid Electrolytes? An Interlaboratory Study
Saneyuki Ohno et al.
ACS ENERGY LETTERS (2020)
Novel dry deposition of LiNbO3 or Li2ZrO3 on LiNi0.6Co0.2Mn0.2O2 for high performance all-solid-state lithium batteries
Young-Jin Kim et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Benchmarking the performance of all-solid-state lithium batteries
Simon Randau et al.
NATURE ENERGY (2020)
High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes
Yong-Gun Lee et al.
NATURE ENERGY (2020)
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Thorben Krauskopf et al.
CHEMICAL REVIEWS (2020)
Influence of Carbon Additives on the Decomposition Pathways in Cathodes of Lithium Thiophosphate-Based All-Solid-State Batteries
Felix Walther et al.
CHEMISTRY OF MATERIALS (2020)
Silicon-Doped Argyrodite Solid Electrolyte Li6PS5I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries
Jun Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Enabling High-Energy Solid-State Batteries with Stable Anode Interphase by the Use of Columnar Silicon Anodes
Sahin Cangaz et al.
ADVANCED ENERGY MATERIALS (2020)
Stress distribution in the composite electrodes of sulfide all-solid-state lithium-ion batteries
Akinari Ohashi et al.
JOURNAL OF POWER SOURCES (2020)
Review-Knowledge-Based Process Design for High Quality Production of NCM811 Cathodes
Carina Amata Heck et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Problems and their origins of Ni-rich layered oxide cathode materials
Sheng S. Zhang
ENERGY STORAGE MATERIALS (2020)
Rational Design of Quasi-Zero-Strain NCM Cathode Materials for Minimizing Volume Change Effects in All-Solid-State Batteries
Florian Strauss et al.
ACS MATERIALS LETTERS (2020)
Pressure effects on sulfide electrolytes for all solid-state batteries
Jean-Marie Doux et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Pressure-Driven Interface Evolution in Solid-State Lithium Metal Batteries
Xin Zhang et al.
CELL REPORTS PHYSICAL SCIENCE (2020)
Advances and Prospects of Sulfide All-Solid-State Lithium Batteries via One-to-One Comparison with Conventional Liquid Lithium Ion Batteries
Hyomyung Lee et al.
ADVANCED MATERIALS (2019)
Preparation and characterization of lithium ion conductive Li3SbS4 glass and glass-ceramic electrolytes
Takuya Kimura et al.
SOLID STATE IONICS (2019)
On the Functionality of Coatings for Cathode Active Materials in Thiophosphate-Based All-Solid-State Batteries
Sean P. Culver et al.
ADVANCED ENERGY MATERIALS (2019)
Solid-State Lithium Batteries: Bipolar Design, Fabrication, and Electrochemistry
Kyu-Nam Jung et al.
CHEMELECTROCHEM (2019)
Powder aerosol deposition method - novel applications in the field of sensing and energy technology
Michaela Schubert et al.
FUNCTIONAL MATERIALS LETTERS (2019)
Microstructural Modeling of Composite Cathodes for All-Solid-State Batteries
Anja Bielefeld et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2019)
Solvent-Engineered Design of Argyrodite Li6PS5X (X = Cl, Br, I) Solid Electrolytes with High Ionic Conductivity
Laidong Zhou et al.
ACS ENERGY LETTERS (2019)
Tailoring Li6PS5Br ionic conductivity and understanding of its role in cathode mixtures for high performance all-solid-state Li-S batteries
Chuang Yu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Development of an all-solid-state lithium battery by slurry-coating procedures using a sulfidic electrolyte
Tugce Ates et al.
ENERGY STORAGE MATERIALS (2019)
Electrochemical Properties of Composite Cathode Using Bimodal Sized Electrolyte for All-Solid-State Batteries
Chanhwi Park et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Characterizing the Li-Solid-Electrolyte Interface Dynamics as a Function of Stack Pressure and Current Density
Michael J. Wang et al.
JOULE (2019)
A review on strategies addressing interface incompatibilities in inorganic all-solid-state lithium batteries
Ashim Gurung et al.
SUSTAINABLE ENERGY & FUELS (2019)
Recent achievements on sulfide-type solid electrolytes: crystal structures and electrochemical performance
Ze Ma et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Degradation Mechanisms at the Li10GeP2S12/LiCoO2 Cathode Interface in an All-Solid-State Lithium-Ion Battery
Wenbo Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Promises, Challenges, and Recent Progress of Inorganic Solid-State Electrolytes for All-Solid-State Lithium Batteries
Zhonghui Gao et al.
ADVANCED MATERIALS (2018)
Capacity Fading of Ni-Rich Li[NixCoyMn1-x-y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?
Hoon-Hee Ryu et al.
CHEMISTRY OF MATERIALS (2018)
Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries
Raimund Koerver et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Importance of mixing protocol for enhanced performance of composite cathodes in all-solid-state batteries using sulfide solid electrolyte
Sungwoo Noh et al.
JOURNAL OF ELECTROCERAMICS (2018)
All-solid-state lithium-ion and lithium metal batteries - paving the way to large-scale production
Joscha Schnell et al.
JOURNAL OF POWER SOURCES (2018)
Toward practical all-solid-state lithium-ion batteries with high energy density and safety: Comparative study for electrodes fabricated by dry- and slurry-mixing processes
Young Jin Nam et al.
JOURNAL OF POWER SOURCES (2018)
Impact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
Florian Strauss et al.
ACS ENERGY LETTERS (2018)
Current status and challenges for automotive battery production technologies
Arno Kwade et al.
NATURE ENERGY (2018)
Facile Synthesis toward the Optimal Structure-Conductivity Characteristics of the Argyrodite Li6PS5Cl Solid-State Electrolyte
Chuang Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Gas Evolution in All-Solid-State Battery Cells
Timo Bartsch et al.
ACS ENERGY LETTERS (2018)
A review of structural properties and synthesis methods of solid electrolyte materials in the Li2S - P2S5 binary system
Omer Ulas Kudu et al.
JOURNAL OF POWER SOURCES (2018)
Favorable composite electrodes for all-solid-state batteries
Atsushi Sakuda
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2018)
Slurry-Based Processing of Solid Electrolytes: A Comparative Binder Study
Nathalie Riphaus et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Critical electrode properties and drying conditions causing component segregation in graphitic anodes for lithium-ion batteries
Bastian G. Westphal et al.
JOURNAL OF ENERGY STORAGE (2018)
Effect of the binder content on the electrochemical performance of composite cathode using Li6PS5Cl precursor solution in an all-solid-state lithium battery
Nataly Carolina Rosero-Navarro et al.
IONICS (2017)
Characterization of the calendering process for compaction of electrodes for lithium-ion batteries
Chris Meyer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Selection of Binder and Solvent for Solution-Processed All-Solid-State Battery
Kyulin Lee et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
All-Solid-State Battery Electrode Sheets Prepared by a Slurry Coating Process
Atsushi Sakuda et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Mercury intrusion for ion- and conversion-based battery electrodes - Structure and diffusion coefficient determination
Linus Froboese et al.
MATERIALS CHARACTERIZATION (2017)
Reviving the lithium metal anode for high-energy batteries
Dingchang Lin et al.
NATURE NANOTECHNOLOGY (2017)
Redox-active cathode interphases in solid-state batteries
Raimund Koerver et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries
Wenbo Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Influence of high intensive dry mixing and calendering on relative electrode resistivity determined via an advanced two point approach
Bastian Georg Westphal et al.
JOURNAL OF ENERGY STORAGE (2017)
High Capacity, Superior Cyclic Performances in All-Solid-State Lithium-Ion Batteries Based on 78Li2S-22P2S5 Glass-Ceramic Electrolytes Prepared via Simple Heat Treatment
Yibo Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Xin-Bing Cheng et al.
CHEMICAL REVIEWS (2017)
Capacity Fade in Solid-State Batteries: Interphase Formation and Chemomechanical Processes in Nickel-Rich Layered Oxide Cathodes and Lithium Thiophosphate Solid Electrolytes
Raimund Koerver et al.
CHEMISTRY OF MATERIALS (2017)
Interfacial Processes and Influence of Composite Cathode Microstructure Controlling the Performance of All-Solid-State Lithium Batteries
Wenbo Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Fabrication of composite positive electrode sheet with high active material content and effect of fabrication pressure for all-solid-state battery
Mari Yamamoto et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2017)
High Energy Batteries What you need for a Super-Battery?
Peter Bieker et al.
CHEMIE IN UNSERER ZEIT (2016)
Elastic Properties, Defect Thermodynamics, Electrochemical Window, Phase Stability, and Li+ Mobility of Li3PS4: Insights from First-Principles Calculations
Yanhan Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Life Cycle Assessment and resource analysis of all-solid-state batteries
Stefanie Troy et al.
APPLIED ENERGY (2016)
The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties
Henrike Bockholt et al.
JOURNAL OF POWER SOURCES (2016)
Unravelling Li-Ion Transport from Picoseconds to Seconds: Bulk versus Interfaces in an Argyrodite Li6PS5Cl-Li2S All-Solid-State Li-Ion Battery
Chuang Yu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes
Henrike Bockholt et al.
POWDER TECHNOLOGY (2016)
Interphase formation and degradation of charge transfer kinetics between a lithium metal anode and highly crystalline Li7P3S11 solid electrolyte
Sebastian Wenzel et al.
SOLID STATE IONICS (2016)
A solid future for battery development
Juergen Janek et al.
NATURE ENERGY (2016)
High-power all-solid-state batteries using sulfide superionic conductors
Yuki Kato et al.
NATURE ENERGY (2016)
Development of Sulfide Solid Electrolytes and Interface Formation Processes for Bulk-Type All-Solid-State Li and Na Batteries
Akitoshi Hayashi et al.
FRONTIERS IN ENERGY RESEARCH (2016)
Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations
Yizhou Zhu et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Effect of hybrid conductive additives on all-solid-state lithium batteries using Li2S-P2S5 glass-ceramics
Sungbo Hong et al.
CERAMICS INTERNATIONAL (2015)
Issues and Challenges for Bulk-Type All-Solid-State Rechargeable Lithium Batteries using Sulfide Solid Electrolytes
Yoon Seok Jung et al.
ISRAEL JOURNAL OF CHEMISTRY (2015)
Discontinuous and Continuous Processing of Low-Solvent Battery Slurries for Lithium Nickel Cobalt Manganese Oxide Electrodes
Henning Dreger et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Ceramic separators based on Li+-conducting inorganic electrolyte for high-performance lithium-ion batteries with enhanced safety
Yun-Chae Jung et al.
JOURNAL OF POWER SOURCES (2015)
Preparation of high lithium-ion conducting Li6PS5Cl solid electrolyte from ethanol solution for all-solid-state lithium batteries
So Yubuchi et al.
JOURNAL OF POWER SOURCES (2015)
Interphase formation on lithium solid electrolytes-An in situ approach to study interfacial reactions by photoelectron spectroscopy
Sebastian Wenzel et al.
SOLID STATE IONICS (2015)
Fast Lithium Ion Conduction in Li2SnS3: Synthesis, Physicochemical Characterization, and Electronic Structure
Jacilynn A. Brant et al.
CHEMISTRY OF MATERIALS (2015)
Solid Electrolyte: the Key for High-Voltage Lithium Batteries
Juchuan Li et al.
ADVANCED ENERGY MATERIALS (2015)
Comparative Study of TiS2/Li-In All-Solid-State Lithium Batteries Using Glass-Ceramic Li3PS4 and Li10GeP2S12 Solid Electrolytes
Bum Ryong Shin et al.
ELECTROCHIMICA ACTA (2014)
A synthesis of crystalline Li7P3S11 solid electrolyte from 1,2-dimethoxyethane solvent
Seitaro Ito et al.
JOURNAL OF POWER SOURCES (2014)
A rocking chair type all-solid-state lithium ion battery adopting Li2O-ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyte
Seitaro Ito et al.
JOURNAL OF POWER SOURCES (2014)
Influence of formulation method and related processes on structural, electrical and electrochemical properties of LMS/NCA-blend electrodes
W. Haselrieder et al.
PROGRESS IN SOLID STATE CHEMISTRY (2014)
Genotoxicity and carcinogenicity risk of carbon nanotubes
Shinya Toyokuni
ADVANCED DRUG DELIVERY REVIEWS (2013)
Li10SnP2S12: An Affordable Lithium Superionic Conductor
Philipp Bron et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Atsushi Sakuda et al.
SCIENTIFIC REPORTS (2013)
Improvement of chemical stability of Li3PS4 glass electrolytes by adding MxOy (M = Fe, Zn, and Bi) nanoparticles
Akitoshi Hayashi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Recent development of sulfide solid electrolytes and interfacial modification for all-solid-state rechargeable lithium batteries
Masahiro Tatsumisago et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2013)
Intensive Dry and Wet Mixing Influencing the Structural and Electrochemical Properties of Secondary Lithium-Ion Battery Cathodes
H. Bockholt et al.
LITHIUM-ION BATTERIES -AND- NON-AQUEOUS ELECTROLYTES FOR LITHIUM BATTERIES - PRIME 2012 (2013)
New Lithium Chalcogenidotetrelates, LiChT: Synthesis and Characterization of the Li+-Conducting Tetralithium ortho-Sulfidostannate Li4SnS4
Thomas Kaib et al.
CHEMISTRY OF MATERIALS (2012)
Performance Optimization of All-Solid-State Lithium Ion Batteries Using a Li2S-P2S5 Solid Electrolyte and LiCoO2 Cathode
Junghoon Kim et al.
ELECTRONIC MATERIALS LETTERS (2012)
Invited Paper: Recent Development of Bulk-Type Solid-State Rechargeable Lithium Batteries with Sulfide Glass-ceramic Electrolytes
Akitoshi Hayashi et al.
ELECTRONIC MATERIALS LETTERS (2012)
Variation in structure and Li+-ion migration in argyrodite-type Li6PS5X (X = Cl, Br, I) solid electrolytes
Prasada Rao Rayavarapu et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2012)
Mechanochemical synthesis of Li-argyrodite Li6PS5X (X = Cl, Br, I) as sulfur-based solid electrolytes for all solid state batteries application
Sylvain Boulineau et al.
SOLID STATE IONICS (2012)
Interfacial phenomena in solid-state lithium battery with sulfide solid electrolyte
Kazunori Takada et al.
SOLID STATE IONICS (2012)
How Electrolytes Influence Battery Safety
E. Peter Roth et al.
ELECTROCHEMICAL SOCIETY INTERFACE (2012)
Crystallization Process for Superionic Li7P3S11 Glass-Ceramic Electrolytes
Keiichi Minami et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
A lithium superionic conductor
Noriaki Kamaya et al.
NATURE MATERIALS (2011)
Structural change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere
Hiromasa Muramatsu et al.
SOLID STATE IONICS (2011)
Crystal structure and phase transitions of the lithium ionic conductor Li3PS4
Kenji Homma et al.
SOLID STATE IONICS (2011)
Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials
Y. -H. Chen et al.
JOURNAL OF POWER SOURCES (2010)
Crystal structure of a superionic conductor, Li7P3S11
Hisanori Yamane et al.
SOLID STATE IONICS (2007)
5 V class all-solid-state composite lithium battery with Li3PO4 coated LiNi0.5Mn1.5O4
Y Kobayashi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)