☆ 4.8 Article

Understanding the electro-chemo-mechanics of Li plating in anode-free solid-state batteries with operando 3D microscopy

MATTER (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

The effect of aspect ratio on the mechanical behavior of Li metal in solid-state cells

Catherine G. Haslam et al.

Summary: The study investigates the compression creep behavior of Li metal in relation to electrode thickness and applied stress, revealing the influence of these factors on steady-state creep behavior. Friction at interfaces is suggested to control Li deformation at low aspect ratios.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Physical

An Investigation of Chemo-Mechanical Phenomena and Li Metal Penetration in All-Solid-State Lithium Metal Batteries Using In Situ Optical Curvature Measurements

Jung Hwi Cho et al.

Summary: Solid-electrolytes (SEs) provide a way to increase energy density in lithium metal batteries, but the penetration of lithium metal through garnet based LLZO solid electrolytes is identified as a critical failure process, related to difficult-to-probe chemo-mechanical processes. This study introduces in situ curvature measurements to investigate the chemo-mechanical phenomena during lithium plating. The results show that there is pressure build-up in the Li metal during plating until short circuits occur, highlighting the importance of minimizing surface defects and flaws in the manufacturing processes.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Linking void and interphase evolution to electrochemistry in solid-state batteries using operando X-ray tomography

John A. Lewis et al.

Summary: The study using operando synchrotron X-ray computed microtomography reveals the evolution of lithium/solid-state electrolyte interfaces during battery cycling, showing how void formation, interphase growth, and volumetric changes affect cell behavior. Loss of contact at the interface between lithium and the solid-state electrolyte is found to be the primary cause of cell failure, while redox-active interphase and global volume changes upon charge also play significant roles in determining cell performance. These findings provide insights into the impact of chemo-mechanical phenomena on cell behavior, aiding in the development of solid-state batteries.

NATURE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Evolving contact mechanics and microstructure formation dynamics of the lithium metal-Li7La3Zr2O12 interface

Wesley Chang et al.

Summary: The authors investigate the chemo-mechanical changes at the lithium metal/solid electrolyte interface via operando acoustic transmission and magnetic resonance imaging.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

The Effect of Mechanical State on the Equilibrium Potential of Alkali Metal/Ceramic Single-Ion Conductor Systems

Eric A. Carmona et al.

Summary: The study shows that the change in equilibrium potential at the metal/electrolyte interface when stress is applied to the metal electrode is linearly proportional to the molar volume of the metal electrode, and the mechanical stress in the electrolyte has a negligible effect on the equilibrium potential.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Transitioning solid-state batteries from lab to market: Linking electro-chemo-mechanics with practical considerations

Michael J. Wang et al.

Summary: SSBs have the potential to replace Li-ion batteries, but they still face challenges. Recent technological advancements are focusing on overcoming these challenges around the electrochemical, thermal, and mechanical properties.

JOULE (2021)

Add to Collection

Article Chemistry, Physical

Operando video microscopy of Li plating and re-intercalation on graphite anodes during fast charging

Yuxin Chen et al.

Summary: This study used plan-view operando video microscopy to investigate lithium plating on graphite anodes in high-energy-density batteries. The results show that lithium plating mainly occurs on graphite particles and is correlated with local minimum of graphite electrode potential. Galvanic corrosion currents are responsible for lithium re-intercalation and dead lithium formation.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Lithium stripping: anisotropic evolution and faceting of pits revealed by operando 3-D microscopy

Adrian J. Sanchez et al.

Summary: This study explores the dynamic evolution of Li metal surface morphology during stripping, revealing strong anisotropy and faceting in surface pits that correlate with surface microstructure. The results provide greater insight into the fundamental nature of Li stripping reactions and raise new questions about the role of microstructure in reversible cycling of Li metal.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Microstructure and Pressure-Driven Electrodeposition Stability in Solid-State Batteries

Ankit Verma et al.

Summary: The stability of interfacial deposition at the Li-metal-solid electrolyte interface in all solid-state batteries is influenced by the stress-transport-electrochemistry coupling and the polycrystalline/amorphous solid electrolyte architecture. The study identifies the optimal solid electrolyte microstructure with desirable ionic conductivity and elastic modulus for superior transport and strength. Experimental results show that external stack pressure has a negligible impact on reaction kinetics, with electrolyte transport overpotentials playing a key role in electrodeposition stability.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Operando analysis of the molten Li|LLZO interface: Understanding how the physical properties of Li affect the critical current density

Bryan Kinzer et al.

Summary: Solid-state electrolytes show potential for high-energy-density Li metal batteries, but the penetration of Li at high current densities remains a challenge. Research reveals a significant increase in critical current density for LLZO at the melting point of Li and highlights the critical role of mechanical properties in determining CCD.

MATTER (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of metallic lithium: from nano to bulk scales

Cole D. Fincher et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Chemistry, Physical

Plan-View Operando Video Microscopy of Li Metal Anodes: Identifying the Coupled Relationships among Nucleation, Morphology, and Reversibility

Adrian J. Sanchez et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Challenges in Lithium Metal Anodes for Solid-State Batteries

Kelsey B. Hatzell et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Energy & Fuels

High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes

Yong-Gun Lee et al.

NATURE ENERGY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries

Thorben Krauskopf et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Multidisciplinary Sciences

Enabling lithium-free manufacturing of pure lithium metal solid-state batteries through in situ plating

Michael J. Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Electrodeposition and Mechanical Stability at Lithium-Solid Electrolyte Interface during Plating in Solid-State Batteries

Qingsong Tu et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Li Penetration in Ceramic Solid Electrolytes: Operando Microscopy Analysis of Morphology, Propagation, and Reversibility

Eric Kazyak et al.

MATTER (2020)

Add to Collection

Article Electrochemistry

An Analysis of Solid-State Electrodeposition-Induced Metal Plastic Flow and Predictions of Stress States in Solid Ionic Conductor Defects

Luis Barroso-Luque et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells

Jitti Kasemchainan et al.

NATURE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Visualizing Chemomechanical Degradation of a Solid-State Battery Electrolyte

Jared Tippens et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Energy & Fuels

Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte

Rochelle Weber et al.

NATURE ENERGY (2019)

Add to Collection

Editorial Material Energy & Fuels

Anode-less

Ji-Guang Zhang

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Nucleation and Early Stage Growth of Li Electrodeposits

Prayag Biswal et al.

NANO LETTERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Elastic, plastic, and creep mechanical properties of lithium metal

Alvaro Masias et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Electrochemistry

Lithium Mechanics: Roles of Strain Rate and Temperature and Implications for Lithium Metal Batteries

William S. LePage et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Characterizing the Li-Solid-Electrolyte Interface Dynamics as a Function of Stack Pressure and Current Density

Michael J. Wang et al.

JOULE (2019)

Add to Collection

Article Electrochemistry

An Extended Formulation of Butler-Volmer Electrochemical Reaction Kinetics Including the Influence of Mechanics

Markus Ganser et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Review Chemistry, Physical

Mechanical behavior of Li-ion-conducting crystalline oxide-based solid electrolytes: a brief review

Jeff Wolfenstine et al.

IONICS (2018)

Add to Collection

Review Energy & Fuels

Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries

Paul Albertus et al.

NATURE ENERGY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

New horizons for inorganic solid state ion conductors

Zhizhen Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Nanoindentation of high-purity vapor deposited lithium films: A mechanistic rationalization of diffusion-mediated flow

Erik G. Herbert et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Chemistry, Physical

Demonstration of high current densities and extended cycling in the garnet Li7La3Zr2O12 solid electrolyte

Nathan J. Taylor et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Effect of Pore Connectivity on Li Dendrite Propagation within LLZO Electrolytes Observed with Synchrotron X-ray Tomography

Fengyu Shen et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Multidisciplinary Sciences

Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes

Chen Xu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Add to Collection

Article Chemistry, Physical

Compliant Yet Brittle Mechanical Behavior of Li2S-P2S5 Lithium-Ion-Conducting Solid Electrolyte

Frank P. McGrogan et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes

Lukas Porz et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Surface Chemistry Mechanism of Ultra-Low Interfacial Resistance in the Solid-State Electrolyte Li7La3Zr2O12

Asma Sharafi et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Elastic Properties of the Solid Electrolyte Li7La3Zr2O12 (LLZO)

Seungho Yu et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Anode-Free Rechargeable Lithium Metal Batteries

Jiangfeng Qian et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Energy & Fuels

Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth

Kai Yan et al.

NATURE ENERGY (2016)

Add to Collection

Article Electrochemistry

Modeling the Nucleation and Growth of Li at Metal Current Collector/LiPON Interfaces

Munekazu Motoyama et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Physical

Effects of current densities on the lithium plating morphology at a lithium phosphorus oxynitride glass electrolyte/copper thin film interface

Fumihiro Sagane et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Materials Science, Multidisciplinary

A preliminary investigation of fracture toughness of Li7La3Zr2O12 and its comparison to other solid Li-ion conductors

Jeff Wolfenstine et al.

MATERIALS LETTERS (2013)

Add to Collection

Article Electrochemistry

Lithium-free thin-film battery with in situ plated Li anode

BJ Neudecker et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.