☆ 4.7 Article

Enhanced electrochemical and capacitive deionization performances of single-layer graphene oxide/nitrogen-doped porous carbon/activated carbon fiber composite electrodes

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Freestanding N-doped graphene membrane electrode with interconnected porous architecture for efficient capacitive deionization

Gujia Zhang et al.

Summary: The unique N-doped graphene freestanding porous membrane electrode prepared through assembly of core-shell composites with incomplete graphene oxide shells using compression molding method and heat-treatment under NH3 atmosphere shows excellent water desalination performance. The interconnected sphere shells and nitrogen doping contribute to the high CDI capacity and good desalination abilities of these graphene carbonaceous freestanding electrodes.

CARBON (2022)

Add to Collection

Article Engineering, Environmental

Adsorptive removal of indomethacin and diclofenac from water by polypyrrole doped-GO/COF-300 nanocomposites

Jing-Bo Feng et al.

Summary: An effective adsorbent of polypyrrole doped GO/COF-300 (GO/COF-300/PPy) nanocomposite was prepared, showing high adsorption capacity for removing indomethacin (IDM) and diclofenac (DCF) from aqueous solution with good reusability. The nanocomposite exhibited fast adsorption equilibrium, conformed to pseudo-second-order model and Langmuir isotherm model, and maintained high removal efficiency even under high concentration of humic acid in the environment. This study suggests the potential application of GO/COF-300/PPy nanocomposites in water environmental remediation.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

In situ carbon coating for enhanced chemical stability of copper nanowires

Xiaolan Tong et al.

Summary: This study presents a simple strategy to improve the chemical stability of copper nanowires by coating them with a carbon protective layer through hydrothermal carbonization method. By tailoring key factors, carbon-coated copper nanowires with excellent resistance against corrosion and oxidation were successfully prepared.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Activated carbon fiber-loaded single layer graphene oxide-based capacitive deionization electrode materials for water desalination applications

Lijuan Men et al.

Summary: In this study, a novel CDI electrode material, single layer graphene oxide loaded onto activated carbon fibers (SGO@ACF), was successfully prepared. The electrode exhibited high specific surface area, excellent electrochemical performance, good cyclability, and high salt adsorption capacity, making it a promising candidate for CDI desalination applications.

IONICS (2022)

Add to Collection

Article Engineering, Chemical

Electro-enhanced adsorption of lead ions from slightly-polluted water by capacitive deionization

Ranran Wang et al.

Summary: In this study, rGO/NCDs composites were successfully synthesized for optimizing the preparation process of CDI electrode, exhibiting excellent electrochemical properties and superhydrophilic property. The CDI tests showed that the electrosorption capacity of rGO/25%NCDs electrode was higher, indicating a good removal effect on Pb2+ pollutants.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Microporous carbon derived from hydroxyl functionalized organic network for efficient adsorption of flumequine: Adsorption mechanism and application potentials

Zhe Zhao et al.

Summary: A microporous carbon derived from a hydroxyl functionalized organic network was prepared and investigated for its adsorption of FLU, showing high adsorption capacity, regeneration capability, and wide application potentials. The study provides insights into the development of new synthesis strategies and the extensive application of pollutant removals by this carbon material in environmental science.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Chemical

Bio-composite nanoarchitectonics for graphene tofu as useful source material for capacitive deionization

Kun Liu et al.

Summary: This research successfully synthesized a low-cost, naturally sustainable, and high-performance electrode material NAPC/G, which has a high specific surface area, rich pore structure, and good conductivity. Benefit from the abundant ion adsorption sites and improved conductivity, the electrode material exhibits high specific capacitance and good cycle stability.

DESALINATION (2022)

Add to Collection

Article Chemistry, Physical

Enhanced electrochemical and capacitive deionization performance of metal organic framework/holey graphene composite electrodes

Jianwei Feng et al.

Summary: A novel metal organic framework (MOF)/holey graphene (HG) composite was designed and prepared for electrochemistry and capacitive deionization (CDI) applications. The composite electrodes exhibited high capacitance, low charge transfer resistance, and excellent cycling stability, making them promising electrode materials for CDI. The synergistic effect of combining MOF pseudocapacitance performance with the high conductivity of graphene contributed to the enhanced performance of MOF/HG composites.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Environmental Sciences

Fe(II) enhances simultaneous phosphorus removal and denitrification in heterotrophic denitrification by chemical precipitation and stimulating denitrifiers activity

Hang Ma et al.

Summary: This study demonstrates that the addition of Fe(II) significantly enhances the removal of TP and TN in denitrification processes, leading to improved denitrification through mechanisms such as increased denitrification enzyme activity, stimulation of denitrifier metabolism and growth, and elevation of denitrifying genes abundance.

ENVIRONMENTAL POLLUTION (2021)

Add to Collection

Article Agricultural Engineering

Adsorption/desorption characteristics and chromatographic purification of polyphenols from Vernonia patula (Dryand.) Merr. using macroporous adsorption resin

Mengyang Hou et al.

Summary: Vernonia patula has been traditionally used as a medicine in some parts of Asia and is considered a potential source of bioactive polyphenols. This research investigated the adsorption/desorption characteristics and chromatographic purification of total polyphenols from V. patula using macroporous adsorption resin. The results showed efficient purification and increased content of chlorogenic acid and caffeic acid in VPTP-enriched extracts.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Review Engineering, Environmental

Tuning oxygenated functional groups on biochar for water pollution control: A critical review

Lichun Dai et al.

Summary: Biochar has gained attention in water pollution control due to its tunable physico-chemical properties, especially the oxygenated functional groups (OFGs) which act as key active sites for pollutant removal through adsorption and redox reactions. Various strategies for tuning OFGs on biochar have been explored, such as in-situ and ex-situ oxidation, as well as grafting carboxyl groups via reactions like cycloaddition/acylation, leading to enhanced performance in pollutant removal.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Simultaneous adsorption of uranium(VI) and 2-chlorophenol by activated carbon fiber supported/modified titanate nanotubes (TNTs/ACF): Effectiveness and synergistic effects

Jun Duan et al.

Summary: A new composite material, TNTs/ACF, was prepared for simultaneous removal of U(VI) and 2-Chlorophenol, showing high adsorption capacities and fast sorption kinetics. The adsorption synergy of U(VI) and 2-CP in binary systems was observed, highlighting the potential of TNTs/ACF for removing radionuclides and chlorinated chemicals from contaminated water.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Composites

Effect of multiscale reinforcement by fiber surface treatment with polyvinyl alcohol/graphene oxide/oxidized carbon nanotubes on the mechanical properties of reinforced hybrid fiber composites

Yuxin He et al.

Summary: Polyvinyl alcohol-graphene oxide-oxidized carbon nanotube hybrid coatings were used to modify glass fibers and carbon fibers, resulting in modified hybrid composites with different concentric structures. The hybrid structure optimized the mechanical properties of the composites by combining the advantages of the two types of fiber reinforcement, with interface strength playing a crucial role. Mechanical properties were significantly enhanced after modification, and interlaminar shear strength was improved with hybrid coating.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Graphene oxide and reduced graphene oxide coated cotton fabrics with opposite wettability for continuous oil/water separation

Shaolin Yang et al.

Summary: The study presents a low-cost, mild and environmentally friendly method to prepare underwater superoleophobic graphene oxide (GO) and superhydrophobic reduced graphene oxide (rGO) coated fabrics for efficient separation of various oil/water mixtures, showcasing high efficiency and recyclability in harsh environments.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Comparative study of electrosorption performance of solar reduced graphene oxide in flow-between and flow-through capacitive deionization architectures

Shreerang D. Datar et al.

Summary: A comparison was made between flow-between and flow-through capacitive deionization setups using solar reduced graphene oxide (SRGO) as an electrode material. Different cations (sodium and potassium) were studied to analyze their effect on electrosorption performance, with different voltage and salt solution concentrations used. The results were validated using Langmuir and Freundlich adsorption isotherms, along with a modified Donnan (mD) model for additional validation.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Construction and evaluation of a novel three-electrode capacitive deionization system with high desalination performance

Mingxing Shi et al.

Summary: Research shows that utilizing a three-electrode CDI system with flow-through and flow-by electrodes can achieve higher salt adsorption capacity and faster salt adsorption rate. Additionally, this system has higher charge efficiency, lower energy consumption, and shorter desorption time.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Highly efficient water desalination by capacitive deionization on biomass-derived porous carbon nanoflakes

Ting Lu et al.

Summary: Capacitive deionization (CDI) utilizes the electrical double layer to separate ions from saline water. There is growing interest in using low-cost, eco-friendly carbon materials derived from abundant biomass for CDI. Carbon nanoflakes prepared from xylose pyrolysis with KHCO3 show promising salt adsorption capacity, indicating potential industrial application for CDI.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Environmental Sciences

The Adsorption Mechanism of Montmorillonite for Different Tetracycline Species at Different pH Conditions: the Novel Visual Analysis of Intermolecular Interactions

Hongling Zhang et al.

Summary: This study investigated the adsorption mechanisms of clay minerals on antibiotic PPCPs with different ionization states under varying pH conditions. Various analytical tools were used to quantitatively analyze the electrostatic interactions between MMT and different TC species, providing insights into the microscopic interactions at the atomic level.

WATER AIR AND SOIL POLLUTION (2021)

Add to Collection

Article Materials Science, Textiles

Polypyrrole/Organic Sulfonic Acid Coated Activated Carbon Fiber Felt as Flexible Supercapacitor with High-performance

Huiyu Yang et al.

Summary: Polypyrrole was deposited on carbon fiber felt by in-situ polymerization to prepare a composite textile electrode, showing improved electrochemical performance with the doping of organic sulfonic acid. The flexible electrode exhibited high areal capacitance, energy density, and power density, making it promising for wearable electronic devices.

FIBERS AND POLYMERS (2021)

Add to Collection

Article Engineering, Chemical

The enhanced adsorption of Ampicillin and Amoxicillin on modified montmorillonite with dodecyl dimethyl benzyl ammonium chloride: Experimental study and density functional theory calculation

Yuan Li et al.

Summary: By modifying Ca-montmorillonite with quaternary ammonium surfactant dodecyl benzyl ammonium chloride, organo D-Mt was obtained as an adsorbent for micropollutants AMP and AMX, showing higher adsorption capacity and a more suitable Freundlich adsorption isotherm second-order kinetic model. Moreover, thermodynamic study indicated that adsorption was more likely to occur at higher temperatures, suggesting that adsorption of the two pollutants was a spontaneous endothermic process.

ADVANCED POWDER TECHNOLOGY (2021)

Add to Collection

Review Environmental Sciences

Faradic capacitive deionization (FCDI) for desalination and ion removal from wastewater

Enas Taha Sayed et al.

Summary: Capacitive deionization (CDI) as an emerging desalination technology has gained attention for its low cost and energy-efficient nature. By utilizing Faradaic electrode materials in a novel technology called Faradaic CDI (FCDI), higher salt removal characteristics and lower energy consumption can be achieved, making it a promising alternative to conventional carbon-based CDI for desalination and wastewater treatment applications.

CHEMOSPHERE (2021)

Add to Collection

Article Electrochemistry

Synthesis of biomass-derived carbon aerogel/MnOx composite as electrode material for high-performance supercapacitors

Huiming Zhou et al.

Summary: The synthesis of high-performance 3D carbon aerogel/MnOx composite from radish biomass has shown promising electrochemical properties for supercapacitor applications. The composite impregnated with 1.6 mmol Mn(NO3)(2) exhibited the highest gravimetric specific capacitance and power density in the study.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Review Environmental Sciences

Review of phosphate removal from water by carbonaceous sorbents

Ismail W. Almanassra et al.

Summary: Phosphate is a major pollutant that leads to eutrophication in water bodies, and adsorption technology is widely used to reduce phosphate levels in water. Carbon-based materials and their composites are commonly used for phosphate removal due to their high phosphate sorption capacity.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Article Engineering, Environmental

Co-pyrolysis of spent radioactive ion exchange resin and manganese dioxide: Decrease the decomposition temperatures of functional groups

Jia Luo et al.

Summary: In this study, the co-pyrolysis of mixed resin with manganese dioxide at a low temperature effectively degraded spent radioactive ion exchange resin. The decomposition temperatures were significantly reduced, showing the potential of manganese dioxide as a catalyst. Various spectroscopy techniques revealed the chemical reactions and mechanisms involved in the co-pyrolysis process.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Environmental Sciences

Electro-Fenton approach in oxidative degradation of dimethyl phthalate - The treatment of aqueous leachate from landfills

Maryam Dolatabadi et al.

Summary: In this study, the dimethyl phthalate (DMP) contamination in landfill leachate was effectively removed through the electro-Fenton (EF) process, with a quadratic polynomial model developed and analysis of variance (ANOVA) performed to optimize the process parameters, achieving a high removal rate.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Engineering, Environmental

A probabilistic model for assessing uncertainty and sensitivity in the prediction of monochloramine loss in French river waters

P. Ciffroy et al.

Summary: A comprehensive model simulating monochloramine loss in natural riverine waters was developed, with uncertainty and sensitivity analysis identifying the most influential parameters on half-life determination for NH2Cl. Important research priorities for improving the prediction of NH2Cl half-lives in natural rivers were identified.

WATER RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Purification and Physical-Chemical Characterization of Bromocresol Purple for Carbon System Measurements in Freshwaters, Estuaries, and Oceans

Ellie Hudson-Heck et al.

Summary: This study provides an algorithm for calculating pH values of water samples using purified bromocresol purple (BCP), filling a critical gap in the field of purified sulfonephthalein indicators and enabling high-quality spectrophotometric measurements and pH measurements in various water environments. The method presented in this work demonstrates the importance and effectiveness of purifying BCP for accurate pH calculations and analysis.

ACS OMEGA (2021)

Add to Collection

Article Engineering, Environmental

Self-supporting transition metal chalcogenides on metal substrates for catalytic water splitting

Yang Zhao et al.

Summary: This review introduces typical synthetic strategies for self-supporting TMCs on metal substrates and comprehensively summarizes various metallic matrices for supporting TMC catalysts.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Electro-Fenton approach for highly efficient degradation of the herbicide 2,4-dichlorophenoxyacetic acid from agricultural wastewater: Process optimization, kinetic and mechanism

Maryam Dolatabadi et al.

Summary: An EF technique was developed for efficient removal of 2,4-DPAA from agricultural wastewater, achieving a removal efficiency of 93.7%. The model predicted removal efficiency of 98.6% closely matched the actual result, demonstrating the effectiveness of the developed process.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Silver chromate doped Ti-based metal organic framework: synthesis, characterization, and electrochemical and selective photocatalytic reduction properties

Reda M. Abdelhameed et al.

Summary: Photo-induced reduction is crucial in the synthesis of aniline from nitrobenzene. The use of Ag2CrO4@NH2-MIL-125 nanocatalysts showed remarkable performance improvement, achieving high yield and conversion rate.

NEW JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

High specific capacitance of a 3D-metal-organic framework-confined growth in CoMn2O4 nanostars as advanced supercapacitor electrode materials

Reza Abazari et al.

Summary: In this study, cobalt(ii) metal-organic framework#CoMn2O4 nanocomposites were synthesized and used in hybrid supercapacitors, showing excellent electrochemical performance and potential for advanced energy storage applications.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Engineering, Environmental

Modification of polyacrylonitrile-based activated carbon fibers and their p-nitrophenol adsorption and degradation properties

Yang Yue et al.

Summary: This study investigated the use of modified PAN-ACF, PAN-ACF/TiO2, and PAN-ACF/ZnO adsorbents for the removal of PNP pollutants in wastewater, with adsorption efficiency up to 98.05%. Additionally, ACFs loaded with nano-TiO2 and nano-ZnO photocatalysts exhibited high photocatalytic degradation rates of PNP under UV light irradiation, reaching 99.85% and 98.31% respectively.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in metal-organic framework/graphene-derived materials for energy storage and conversion: design, preparation, and application

Kaixi Wang et al.

Summary: Graphene or chemically modified graphene serves as an ideal template for the controllable growth of metal-organic framework particles, effectively improving the stability and conductivity of MOFs and expanding their applications in electrochemistry. Furthermore, the assembled nanocomposite shows unique advantages and significant potential in energy storage and conversion, highlighting the importance of related studies in this field.

CHEMICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Energy storage and generation through desalination using flow-electrodes capacitive deionization

Hyunseung Lim et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Add to Collection

Article Engineering, Chemical

Removal and recovery of phosphorus from low-strength wastewaters by flow-electrode capacitive deionization

Jing Zhang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Selective and simultaneous determination of hydroquinone and catechol by using a nitrogen-doped bagasse activated carbon modified electrode

Xinyu Zheng et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Environmental Sciences

Graphene oxide and graphene oxide functionalized with silver nanoparticles as adsorbents of phosphates in waters. A comparative study

Y. Vicente-Martinez et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Review Engineering, Chemical

Versatile applications of capacitive deionization (CDI)-based technologies

Wenle Xing et al.

DESALINATION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of a Polypyrrole/Graphene Oxide Composite Electrode by Electrochemical Codeposition for Capacitor Deionization

Juanqin Xue et al.

ACS OMEGA (2020)

Add to Collection

Article Engineering, Environmental

Desalination behavior and performance of flow-electrode capacitive deionization under various operational modes

Kunyue Luo et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Electrochemistry

Cobalt and nickel ferrites based capacitive deionization electrode materials for water desalination applications

Abdul Hai et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

Comparative Investigation of Activated Carbon Electrode and a Novel Activated Carbon/Graphene Oxide Composite Electrode for an Enhanced Capacitive Deionization

Gbenro Folaranmi et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel Photocatalyst Composite of Magnesium Aminoclay and TiO2 Immobilized into Activated Carbon Fiber (ACF) Matrix for Pollutant Removal

Thanh Ngoc Nguyen et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Metal-organic frameworks with different spatial dimensions for supercapacitors

Kuai-Bing Wang et al.

NEW JOURNAL OF CHEMISTRY (2020)

Add to Collection

Article Engineering, Chemical

Development of a novel graphene/Co3O4 composite for hybrid capacitive deionization system

Govindaraj Divyapriya et al.

DESALINATION (2019)

Add to Collection

Article Chemistry, Physical

Porous carbon electrodes from activated wasted coffee grounds for capacitive deionization

Min Qian et al.

IONICS (2019)

Add to Collection

Article Chemistry, Physical

Energy recovery from the flow-electrode capacitive deionization

Junjun Ma et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Engineering, Chemical

Hierarchical composite of N-doped carbon sphere and holey graphene hydrogel for high-performance capacitive deionization

Mengjuan Mi et al.

DESALINATION (2019)

Add to Collection

Article Electrochemistry

Operational durability of three-dimensional Ni-Fe layered double hydroxide electrocatalyst for water oxidation

Seyeong Lee et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Engineering, Chemical

Significantly improved stability of hybrid capacitive deionization using nickel hexacyanoferrate/reduced graphene oxide cathode at low voltage operation

Zibiao Ding et al.

DESALINATION (2019)

Add to Collection

Article Chemistry, Physical

Robust heterostructures of a bimetallic sodiumzinc metal- organic framework and reduced graphene oxide for high- performance supercapacitors

Richa Rajak et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Heterostructure of two different 2D materials based on MoS2 nanoflowers@rGO: an electrode material for sodium-ion capacitors

Kiruthiga Ramakrishnan et al.

NANOSCALE ADVANCES (2019)

Add to Collection

Review Chemistry, Physical

Metal-organic framework composites and their electrochemical applications

Yuqi Xue et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Cost effective synthesis of a copper-1H-imidazole@activated carbon metal organic framework as an electrode material for supercapacitor applications

E. Elanthamilan et al.

NEW JOURNAL OF CHEMISTRY (2018)

Add to Collection

Article Engineering, Environmental

Analysis of capacitive and electrodialytic contributions to water desalination by flow-electrode CDI

Jinxing Ma et al.

WATER RESEARCH (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced electrochemical properties of cerium metal-organic framework based composite electrodes for high-performance supercapacitor application

Rajendran Ramachandran et al.

RSC ADVANCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Electrospun CuO/NiO composite nanofibers for sensitive and selective non-enzymatic nitrite sensors

Jayachandran Saravanan et al.

NEW JOURNAL OF CHEMISTRY (2017)

Add to Collection

Article Chemistry, Physical

Application of a nanostructured sensor based on NiO nanoparticles modified carbon paste electrode for determination of methyldopa in the presence of folic acid

Masoud Fouladgar et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Review on supercapacitors: Technologies and materials

Ander Gonzalez et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Engineering, Chemical

TiO2 nanorod-intercalated reduced graphene oxide as high performance electrode material for membrane capacitive deionization

Ahmed G. El-Deen et al.

DESALINATION (2015)

Add to Collection

Article Electrochemistry

Fabrication of mesoporous graphene electrodes with enhanced capacitive deionization

Xiaoyu Gu et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Chemistry, Physical

Enhanced capacitive deionization performance of graphene by nitrogen doping

Xingtao Xu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

Titanium (III) cation selective electrode based on synthesized tris(2pyridyl) methylamine ionophore and its application in water samples

Majid Rezayi et al.

SCIENTIFIC REPORTS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Graphene/Metal Oxide Nanoparticle Hybrids for High-Performance Capacitive Deionization of Saline Water

Huajie Yin et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

A thermodynamic study of interaction of Na+ cation with benzo-15-crown-5 in binary mixed non-aqueous solvents

G. H. Rounaghi et al.

JOURNAL OF INCLUSION PHENOMENA AND MACROCYCLIC CHEMISTRY (2009)

Add to Collection

Article Chemistry, Physical

Generalized and facile synthesis approach to N-doped highly graphitic mesoporous carbon materials

YD Xia et al.

CHEMISTRY OF MATERIALS (2005)

Add to Collection

Article Chemistry, Physical

Mesoporous carbons with graphitic structures fabricated by using porous silica materials as templates and iron-impregnated polypyrrole as precursor

AB Fuertes et al.

JOURNAL OF MATERIALS CHEMISTRY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.