4.7 Article

Conductive metal organic framework mediated Sb nanoparticles as high-capacity anodes for rechargeable potassium-ion batteries

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Titanates for sodium-ion storage

Shengyang Dong et al.

Summary: Sodium-ion storage technology based on titanate materials is making significant progress, with advantages such as low cost, environmental friendliness, and good stability, and is gradually becoming a promising candidate for large-scale energy storage.

NANO TODAY (2022)

Article Chemistry, Physical

Concunrent manipulation of anion and cation adsorption kinetics in pancake-like carbon achieves ultrastable potassium ion hybrid capacitors

Gongrui Wang et al.

Summary: The researchers prepared a bi-functional hierarchical porous carbon material with superior energy storage performance for potassium ion hybrid capacitors. The material exhibited high specific capacity, stable cycling capability, and high energy/power density. The enhanced potassium ion storage was attributed to the synergy of structure, electronic properties, and ion adsorption kinetics. This study is of great importance for large-scale energy storage.

ENERGY STORAGE MATERIALS (2022)

Review Physics, Condensed Matter

Antimony (Sb)-Based Anodes for Lithium-Ion Batteries: Recent Advances

Sreejesh Moolayadukkam et al.

Summary: This paper discusses the increasing attention towards electrochemical energy storage systems, especially rechargeable batteries, to mitigate the use of fossil fuels and maintain a clean environment. Although graphite is still widely used as the anode in commercial LIBs, antimony is seen as a promising alternative material with potential benefits.

CONDENSED MATTER (2022)

Article Electrochemistry

Facile Fabrication of Highly Porous 3D Sponge-Like Si@C Composites as High-Performance Anode Materials for Lithium-Ion Batteries

Chan-Woo Min et al.

Summary: In this study, highly porous 3D sponge-like mesoporous (MP)-Si@C composites were synthesized using a mass-scalable method. The optimized composite electrode exhibited outstanding electrochemical performance at high C-rates, making it a potential candidate for next-generation LIBs.

BATTERIES & SUPERCAPS (2022)

Review Chemistry, Physical

Hexacyanoferrate-Type Prussian Blue Analogs: Principles and Advances Toward High-Performance Sodium and Potassium Ion Batteries

Aijun Zhou et al.

Summary: This review discusses the research progress on HCF-type cathode materials, focusing on their structural features, redox mechanisms, synthesis control, and modification strategies for improved performance in NIBs and KIBs. The use of HCFs in these battery systems offers specific capacity and voltage advantages, with ongoing efforts to enhance their material properties and promote future design of PBAs for advanced rechargeable batteries.

ADVANCED ENERGY MATERIALS (2021)

Article Engineering, Environmental

Si nanoparticles confined within a conductive 2D porous Cu-based metal-organic framework (Cu-3(HITP)(2)) as potential anodes for high-capacity Li-ion batteries

Aqsa Nazir et al.

Summary: By growing Cu-MOF around Si nanoparticles, a buffer against volume expansion and effective electron and ion-conducting channels were created. The Cu-MOF-coated Si electrode showed high structural stability and low electrochemical degradation during lithiation/delithiation cycles.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Ultrahigh-sensitive mixed-potential ammonia sensor using dual-functional NiWO4 electrocatalyst for exhaust environment monitoring

Aman Bhardwaj et al.

Summary: An ultrahigh-sensitive mixed-potential ammonia sensor was developed using a new dual-functional NiWO4 electrocatalyst, demonstrating excellent sensitivity, selectivity, and trace-level NH3 detection ability. Operating at 550 degrees C, the sensor showed rapid response/recovery times and long-term stability for exhaust environment monitoring.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Nanoscience & Nanotechnology

Dual-Functional Template-Induced In Situ Polymerization Process Enables the Hierarchical Carbonaceous Nanotubes with Simultaneous Sn Cluster Incorporation and Nitrogen-Doping for Superior Potassium-Ion Storage

Jie Li et al.

Summary: Hierarchical carbonaceous nanotubes incorporating ultrasmall Sn clusters and nitrogen doping (u-Sn@NCNTs) were successfully synthesized as high-performance anode materials for potassium ion-based energy storage devices. The u-Sn@NCNTs exhibited superior K+ storage capability with high reversible capacity and cycling stability, showing great potential for practical applications in grid-level energy storage systems.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Multidisciplinary

Precise tuning of low-crystalline Sb@Sb2O3 confined in 3D porous carbon network for fast and stable potassium ion storage

Qun Ma et al.

Summary: The composite electrode HTSb@Sb2O3@C-4 with low-crystalline Sb nanoparticles coated with amorphous Sb2O3 dispersed into porous carbon shows outstanding potassium-ion storage performance, attributed to the controlled crystallinity and multiple-buffer-matrix structure. This work provides a novel approach for designing high-performance composite electrodes in energy storage devices.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Green & Sustainable Science & Technology

Recent advances in synthesis of two-dimensional conductive metal-organic frameworks and their electrochemical energy storage application

Pengcheng Mao et al.

Summary: This review discusses the structure, electronic properties, synthetic methods, and potential applications of two-dimensional conductive metal-organic frameworks (2D c-MOFs) in energy storage, as well as analyzing the importance of in-situ characterization technology for their development. Additionally, challenges and perspectives in the synthesis and electrochemical energy storage application of 2D c-MOFs are also discussed.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2021)

Article Electrochemistry

Graphene analogue metal organic framework with superior capacity and rate capability as an anode for lithium ion batteries

Aqsa Nazir et al.

Summary: The study demonstrates the synthesis of porous, 2D graphene analogue conductive metal-organic framework Ni-MOF nanofilaments, which served as a competitive active anode material for lithium-ion batteries, providing high reversible capacities and stable cyclic behavior.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Multidisciplinary

Phosphorus-doping-induced kinetics modulation for nitrogen-doped carbon mesoporous nanotubes as superior alkali metal anode beyond lithium for high-energy potassium-ion hybrid capacitors

Jie Li et al.

Summary: The study successfully synthesized PNC-MeNTs with outstanding electrochemical performance for sodium and potassium storage, as well as for use as an anode in potassium-ion hybrid capacitors. These nanotubes demonstrated high specific capacities, cycling stability, and potential for high energy/power density, indicating a promising avenue for designing carbonaceous electrode candidates for future energy storage devices.

NANOSCALE (2021)

Article Chemistry, Multidisciplinary

Pitch-Derived Soft Carbon as Stable Anode Material for Potassium Ion Batteries

Yuan Liu et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

N/O Dual-Doped Environment-Friendly Hard Carbon as Advanced Anode for Potassium-Ion Batteries

Rong Chao Cui et al.

ADVANCED SCIENCE (2020)

Article Materials Science, Multidisciplinary

Flexible Antimony@Carbon Integrated Anode for High-Performance Potassium-Ion Battery

Kangzhe Cao et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Article Nanoscience & Nanotechnology

Spontaneous and reversible hollowing of alloy anode nanocrystals for stable battery cycling

Matthew G. Boebinger et al.

NATURE NANOTECHNOLOGY (2020)

Article Engineering, Multidisciplinary

Structural and electrical properties of novel phosphate based composite electrolyte for low-temperature fuel cells

Lakshya Mathur et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Chemistry, Multidisciplinary

SnO2 nanoparticles anchored on carbon foam as a freestanding anode for high performance potassium-ion batteries

Hailong Qiu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Energy & Fuels

One-step hydrothermal growth and electrochromic properties of highly stable Prussian green film and device

Fei Li et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Nanoscience & Nanotechnology

Polypyrrole-Modified Prussian Blue Cathode Material for Potassium Ion Batteries via In Situ Polymerization Coating

Ling Xue et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Graphite Anode for a Potassium-Ion Battery with Unprecedented Performance

Ling Fan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Nanoscience & Nanotechnology

Facile Construction of High-Performance Amorphous FePO4/Carbon Nanomaterials as Cathodes of Lithium-Ion Batteries

Zhongyu Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

In Situ Alloying Strategy for Exceptional Potassium Ion Batteries

Jue Wang et al.

ACS NANO (2019)

Article Chemistry, Multidisciplinary

Extremely stable antimony-carbon composite anodes for potassium-ion batteries

Jing Zheng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Multidisciplinary

Sb-MOFs derived Sb nanoparticles@porous carbon for high performance potassium-ion batteries anode

Na Cheng et al.

CHEMICAL COMMUNICATIONS (2019)

Article Chemistry, Physical

Improving Potassium-Ion Batteries by Optimizing the Composition of Prussian Blue Cathode

Bin Huang et al.

ACS APPLIED ENERGY MATERIALS (2019)

Article Chemistry, Physical

K3V2(PO4)2F3 as a robust cathode for potassium-ion batteries

Xiuyi Lin et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Sulfur/Oxygen Codoped Porous Hard Carbon Microspheres for High-Performance Potassium-Ion Batteries

Mei Chen et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Super long-life potassium-ion batteries based on an antimony@carbon composite anode

Qian Liu et al.

CHEMICAL COMMUNICATIONS (2018)

Article Chemistry, Physical

Recent research progress in non-aqueous potassium-ion batteries

Xiaoxi Zou et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Article Chemistry, Multidisciplinary

Electrochemical Intercalation of Potassium into Graphite

Jin Zhao et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

Tin-based composite anodes for potassium-ion batteries

Irin Sultana et al.

CHEMICAL COMMUNICATIONS (2016)

Review Chemistry, Multidisciplinary

Pursuing two-dimensional nanomaterials for flexible lithium-ion batteries

Bin Liu et al.

NANO TODAY (2016)

Review Chemistry, Multidisciplinary

Tin and Tin Compounds for Sodium Ion Battery Anodes: Phase Transformations and Performance

Zhi Li et al.

ACCOUNTS OF CHEMICAL RESEARCH (2015)

Article Nanoscience & Nanotechnology

Potassium-Ion Oxygen Battery Based on a High Capacity Antimony Anode

William D. McCulloch et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

Carbon Electrodes for K-Ion Batteries

Zelang Jian et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Physical

New Porous Crystals of Extended Metal-Catecholates

Mohamad Hmadeh et al.

CHEMISTRY OF MATERIALS (2012)