Related references
Note: Only part of the references are listed.PEDOT Dispersed With Sulfobutylated Phenol Formaldehyde Resin: A Highly-Efficient Hole Transport Material in Polymer Solar Cells
Yuan Li et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2016)
1,3,5-triazine crosslinked 2,5-dibromohydroquinone as new hole-transport material in polymer light-emitting diodes
Yuan Li et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2016)
Highly Efficient Inverted Perovskite Solar Cells With Sulfonated Lignin Doped PEDOT as Hole Extract Layer
Ying Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Highly Improved Efficiency of Deep-Blue Fluorescent Polymer Light-Emitting Device Based on a Novel Hole Interface Modifier with 1,3,5-Triazine Core
Lianpeng Xia et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Novel Hot Exciton Blue Fluorophores for High Performance Fluorescent/Phosphorescent Hybrid White Organic Light-Emitting Diodes with Superhigh Phosphorescent Dopant Concentration and Improved Efficiency Roll-Off
Xinhua Ouyang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Imaging the Phase Separation Between PEDOT and Polyelectrolytes During Processing of Highly Conductive PEDOT:PSS Films
Liangqi Ouyang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Influence of Molecular Geometry of Perylene Diimide Dimers and Polymers on Bulk Heterojunction Morphology Toward High-Performance Nonfullerene Polymer Solar Cells
Chen-Hao Wu et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
The Crystallization of PEDOT:PSS Polymeric Electrodes Probed In Situ during Printing
Claudia M. Palumbiny et al.
ADVANCED MATERIALS (2015)
9,9′-Anthryl-anthroxyl radicals: strategic stabilization of highly reactive phenoxyl radicals
Tatsuya Aotake et al.
CHEMICAL COMMUNICATIONS (2015)
Unexpected Strong Blue Photoluminescence Produced from the Aggregation of Unconventional Chromophores in Novel Siloxane-Poly(amidoamine) Dendrimers
Hang Lu et al.
MACROMOLECULES (2015)
Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte
Xinhua Ouyang et al.
NATURE PHOTONICS (2015)
Effect of aggregation behavior and phenolic hydroxyl group content on the performance of lignosulfonate doped PEDOT as a hole extraction layer in polymer solar cells
Nanlong Hong et al.
RSC ADVANCES (2015)
An efficient hole transport material based on PEDOT dispersed with lignosulfonate: preparation, characterization and performance in polymer solar cells
Yuan Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Arylsilanes and siloxanes as optoelectronic materials for organic light-emitting diodes (OLEDs)
Dianming Sun et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review
Hui Shi et al.
ADVANCED ELECTRONIC MATERIALS (2015)
Poly[(maleic anhydride)-alt-(vinyl acetate)]: A Pure Oxygenic Nonconjugated Macromolecule with Strong Light Emission and Solvatochromic Effect
Engui Zhao et al.
MACROMOLECULES (2015)
Modification of the Active Layer/PEDOT:PSS Interface by Solvent Additives Resulting in Improvement of the Performance of Organic Solar Cells
Olesia Synooka et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Optimization of the Power Conversion Efficiency of Room Temperature-Fabricated Polymer Solar Cells Utilizing Solution Processed Tungsten Oxide and Conjugated Polyelectrolyte as Electrode Interlayer
Lie Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Luminescent Materials: Locking π-Conjugated and Heterocyclic Ligands with Boron(III)
Denis Frath et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Lignin depolymerisation strategies: towards valuable chemicals and fuels
Chunping Xu et al.
CHEMICAL SOCIETY REVIEWS (2014)
Graphene oxide derivatives as hole- and electron-extraction layers for high-performance polymer solar cells
Jun Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
How to design low bandgap polymers for highly efficient organic solar cells
Tao Xu et al.
MATERIALS TODAY (2014)
How does PEDOT combine with PSS? Insights from structural studies
Rupali Gangopadhyay et al.
RSC ADVANCES (2014)
A facile process to produce highly conductive poly(3,4-ethylenedioxythiophene) films for ITO-free flexible OLED devices
Yuxin Li et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Preparation of Lignin-Based Superplasticizer by Graft Sulfonation and Investigation of the Dispersive Performance and Mechanism in a Cementitious System
Hongming Lou et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
A bipolar host containing carbazole/dibenzothiophene for efficient solution-processed blue and white phosphorescent OLEDs
Wei-Chieh Lin et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes
Michael Vosgueritchian et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Effect of molecular weight of sulphonated acetone-formaldehyde condensate on its adsorption and dispersion properties in cementitious system
Hongming Lou et al.
CEMENT AND CONCRETE RESEARCH (2012)
Highly efficient and solution-processed iridium complex for single-layer yellow electrophosphorescent diodes
Xinhua Ouyang et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks
Grzegorz Milczarek et al.
SCIENCE (2012)
Mechanism for dimethylformamide-treatment of poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) layer to enhance short circuit current of polymer solar cells
Cheng Gong et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
One-Step Wet-Spinning Process of Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Fibers and the Origin of Higher Electrical Conductivity
Rouhollah Jalili et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells
Zhicai He et al.
ADVANCED MATERIALS (2011)
Materials and Devices toward Fully Solution Processable Organic Light-Emitting Diodes
Chengmei Zhong et al.
CHEMISTRY OF MATERIALS (2011)
Molecular Semiconductors in Organic Photovoltaic Cells
Alexander W. Hains et al.
CHEMICAL REVIEWS (2010)
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Joseph Zakzeski et al.
CHEMICAL REVIEWS (2010)
Lignin as Renewable Raw Material
Francisco Garcia Calvo-Flores et al.
CHEMSUSCHEM (2010)
Enhancement of the Electrical Conductivity in PEDOT:PSS Films by the Addition of Dimethyl Sulfate
Marisol Reyes-Reyes et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2010)
Glycodynamers: Dynamic Polymers Bearing Oligosaccharides Residues - Generation, Structure, Physicochemical, Component Exchange, and Lectin Binding Properties
Yves Ruff et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
1,3,6,8-Tetrasubstituted Pyrenes: Solution-Processable Materials for Application in Organic Electronics
Prashant Sonar et al.
ORGANIC LETTERS (2010)
Critical Interfaces in Organic Solar Cells and Their Influence on the Open-Circuit Voltage
William J. Potscavage et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Control of the surface composition of a conducting-polymer complex film to tune the work function
Tae-Woo Lee et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Luminescent conjugated polymers:: Illuminating the dark matters of biology and pathology
K. Peter R. Nilsson et al.
ADVANCED MATERIALS (2008)
Pyridine-containing triphenylbenzene derivatives with high electron mobility for highly efficient phosphorescent OLEDs
Shi-Jian Su et al.
ADVANCED MATERIALS (2008)
Glycodynamers: Fluorescent dynamic analogues of polysaccharides
Yves Ruff et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)
Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer
Steven K. Hau et al.
APPLIED PHYSICS LETTERS (2008)
Novel hyperbranched phthalocyanine as a hole injection nanolayer in organic light-emitting diodes
Tae-Woo Lee et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2007)
Layer-by-layer spin self-assembled hole injection layers containing a perfluorinated ionomer for efficient polymer light-emitting diodes
Juhyun Park et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2007)
Self-organized gradient hole injection to improve the performance of polymer electroluminescent devices
Tae-Woo Lee et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Conjugated polymer-based organic solar cells
Serap Guenes et al.
CHEMICAL REVIEWS (2007)
Degradation of organic solar cells due to air exposure
Kenji Kawano et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2006)
The origin of the high conductivity of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT- PSS) plastic electrodes
X. Crispin et al.
CHEMISTRY OF MATERIALS (2006)
Toward the ideal organic light-emitting diode. The versatility and utility of interfacial tailoring by cross-linked siloxane interlayers
JGC Veinot et al.
ACCOUNTS OF CHEMICAL RESEARCH (2005)
Modification of PEDOT: PSS as hole injection layer in polymer LEDs
MM de Kok et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2004)
Synthesis and properties of water-soluble sulfonated acetone-formaldehyde resin
MS Pei et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
On the mechanism of conductivity enhancement in poly (3,4-ethylenedioxythiophene): poly(styrene sulfonate) film through solvent treatment
J Ouyang et al.
POLYMER (2004)
Oxidation of 1,2,4,5-tetramethoxybenzene to a cation radical by cytochrome P450
H Sato et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2000)
Share Paper
